During SSR/PDR, bring down wsa at down
event and restore after SSR up event.
Change-Id: I9a8d3c109144cb0a911cd7597bffc220b0ce95b7
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Add SENARY_MI2S_TX to ec_ref_rx and ext_ec_ref_rx so
it can be used for Audio EC reference and Voice
external EC reference.
CRs-Fixed: 2576685
Change-Id: I08253e705f26293255eea41140fd3461ee300b6b
Signed-off-by: Vignesh Kulothungan <vigneshk@codeaurora.org>
Doa tracking params are applicable only for LE platforms.
Add respective check for the same. Also add config to
enable doa params for LE.
Change-Id: Ia8c2fd095deb44a3dd0b958da0b73c94dbc7d819
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
There is higher noise during headset btn press on some
headsets. Change hold time after button release to 600ms
to resolve the noise.
Change-Id: I87e5e13ce39849090da3d3e50ec53e7fd5fdc0e7
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
Add DOA_PARAMS_ENABLED flag to enable tracking params for LE.
Change-Id: I54f40a72338ab09e43d002d19c74f845c5afcd49
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
Add mixer control support to send ffecns freeze
event.
Change-Id: I86bfd27aac312f85ebbde1f35ff4f65f589c6fec
Signed-off-by: Ramu Gottipati <ramug@codeaurora.org>
Currently, the length of timeout in adm_open for waiting response
from ADSP is 1 second. To prevent unnecessary timeout that results
adm_open failure, increase the length of timeout to 2 seconds.
Change-Id: I670f44964538c3176130c4bb5f8b7a3b3eaf8d8b
Signed-off-by: Xiaoyu Ye <benyxy@codeaurora.org>
Handset record does not resume if pdr is performed
during record. Make VA DMIC_CTL registers as volatile
to write proper value of register to hw.
Change-Id: I2cc10d2eab18e3e8126c56caffa126195c02b4e3
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
Remove common mutex lock before invoking unmap physical
memory command to avoid deadlock issue between voice lock
and common lock in concurrency use cases.
Change-Id: Iaca089f4ff1b6da16e0e59939088fb59516362aa
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
Check for soundwire clock source before clock switch to avoid
redundant clock switch for the same clock source.
Change-Id: I8a7a116cc956f427af677b413928dace5a39a23d
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
Micbias2 internal pull-up remains enabled even after headphone is detected.
This results in power issues. Disable pull up after insertion detection.
Change-Id: I335dbb498192738fc282421d92510400a661cf0c
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
Check soundwire clock source before clock switch to avoid
redundant soundwire device suspend for the same clock source.
Change-Id: I613789b23c171959a60c9a059a30b3f1494f3dfa
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
Headset is corrected as lineout during SSR/PDR. This is
because adc voltage is not measured correctly due to SSR state.
Enable flag deinit_in_progress during SSR down to check if
device is not reported and disable it after device up.
Change-Id: I6fc4fff4149c36ba16aa668a960505504a5d811f
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
In bolero 2.1, VA macro has low power decimations
and support 600k only at 8k/16k. For non-LPI sessions
running at 48k will have mute data if use 600k.
Update driver to use 1.2M for non-LPI sessions.
Change-Id: If495ba8fb780bd22f188835ef87a0ec947df363c
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Ear Path is not disabled properly disabled at power down.
Disable clk and other registers depending on whether ear
takes aux or hph path at pwd.
Change-Id: I987904ddd9bf21b9ed96e754e6eb2514b4d277ce
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
Add routing control for Multimedia17 with USB TX.
Change-Id: Ia05c4fe55ea4dab2b75f4a6da6a54fabdb870f7d
Signed-off-by: Kunlei Zhang <kunleiz@codeaurora.org>
Currently we only set read_abort flag to stop LAB buffering before we call
q6lsm_stop_lab. There is a possibility that this step is skipped under
certain circumstances. This might cause ADSP crash as a result. Therefore,
set flag read_abort before calling q6lsm_stop and q6lsm_close to make sure
LAB buffering is stopped before closing a SVA session.
Change-Id: I7364c31348f908d8920e32f811745549cf305901
Signed-off-by: Xiaoyu Ye <benyxy@codeaurora.org>
Signed-off-by: Meng Wang <mengw@codeaurora.org>
Update smart boost sequence for wsa883x speaker amplifier
to reach max voltage at full scale signal.
Change-Id: Ic1a9ce13753d6e573c7916ae99643c85d6892aa0
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
Add wcd and wsa dai's as additional codec dai's to existing dai links
which uses wcd and wsa respectively.
WCD938x and WSA883x will now be initialized via init ops from one of
these dai links.
WCD and WSA are now initialized as codecs instead of aux devices.
Change-Id: I1da4a6fba764cba82e51db91ad517750db9e647f
Signed-off-by: Vignesh Kulothungan <vigneshk@codeaurora.org>
