Add a new display's backlight type "bl_ctrl_dummy". With this
backlight type, the panel backlight driver will ignore any backlight
requests. This new backlight type will be used with a bare_board or
no-display configuration and the display driver doesn't need to have
any communication with panel.
Port from: (CR).
Change-Id: I1b0c2759deaa4b0808fd4f0503943a191842235e
Signed-off-by: Bang Nguyen <bangnguyen@motorola.com>
Reviewed-on: https://gerrit.mot.com/1697250
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Shuo Yan <shuoyan@motorola.com>
Reviewed-by: Guobin Zhang <zhanggb@motorola.com>
Submit-Approved: Jira Key
Add some pr_info to indicate the DSI and panel are turning off
and on for ESD or black screen investigation.
Port from: 8c661f3540990aa1c37f1ef9b5b361114eec86ce
Signed-off-by: Bang Nguyen <bangnguyen@motorola.com>
Change-Id: I7c05aa6b0cf8f0128c8421d58d5a22647fd1b164
Reviewed-on: https://gerrit.mot.com/1697229
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Shuo Yan <shuoyan@motorola.com>
Reviewed-by: Guobin Zhang <zhanggb@motorola.com>
Submit-Approved: Jira Key
Normal, there is a brightness level from 0-255 (1 byte), but some
panels are support 2 bytes for brightness, (0-1023).
Change-Id: I861aaa3d26e4dbe13183df92f408fdefa709fe61
Reviewed-on: https://gerrit.mot.com/1697222
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Shuo Yan <shuoyan@motorola.com>
Reviewed-by: Guobin Zhang <zhanggb@motorola.com>
Submit-Approved: Jira Key
Drop refcount on pm_suspend commit state if atomic
commit is skipped due to failure. It will avoid frame
trigger during pm_resume call.
Change-Id: Iecd98b106454c82c81a1ef9faaf1af4be2bf19e6
Signed-off-by: Dhaval Patel <pdhaval@codeaurora.org>
Signed-off-by: Jayaprakash Madisetty <quic_jmadiset@quicinc.com>
In some cases HAL sets CRTC_PROP_IDLE_TIMEOUT property to zero
and idle_notify_work which is already scheduled will send notfication
on timer expire. This will cause janks in subsequent commit. This
change cancels the existing delayed idle_notify work and will get
rescheduled after frame trigger if CRTC_PROP_IDLE_TIMEOUT property is
non zero.
Change-Id: I8b9ebce8282425f55838b94cfd345b5e733fa645
Signed-off-by: Mahadevan <quic_mahap@quicinc.com>
Acquire dsi_ctrl->ctrl_lock lock before programming dsi ctrl
registers. Failing this may lead to race conditions in register
programming.
Add missing mutex lock inside dsi_ctrl_host_timing_update().
Change-Id: Ic86cbe282333c0b4d63ae3d5b3356a5d24752203
Signed-off-by: Rajeev Nandan <quic_rajeevny@quicinc.com>
Initialize pll clocks to NULL and warn if dsi select clocks are not
defined in device-tree.
Change-Id: If831692021278b020d49c06c3bb15d631c0376a4
Signed-off-by: Srihitha Tangudu <quic_tangudu@quicinc.com>
Currently the panel esd_recovery_pending flag is cleared for every mode
set. The ESD recovery completes only after the suspend and resume. Clear
the flag only during power on commit.
Change-Id: I97e370feba0aad34558e4675168b4bcb7f5901ca
Signed-off-by: Srihitha Tangudu <quic_tangudu@quicinc.com>
Remove the YUV format setting, will use the upstream code
for YUV mode check.
Change-Id: I24f059ff7cd4cf64f41d7f77bfa6517df0cccfde
Signed-off-by: Zhao, Yuan <yzhao@codeaurora.org>
Signed-off-by: Soutrik Mukhopadhyay <quic_mukhopad@quicinc.com>
This change copies msm_fbdev.c from msm-5.14 kernel, which adds
frame buffer support to display driver. And this file is from
msm-5.4 commit <5fce077d> ("drm: msm: Fix the format prints in
display driver").
Change-Id: I113cb6441334ff6b61cfd15cf863c325d51091b4
Signed-off-by: Kai Xing <quic_kxing@quicinc.com>
Add required changes to makefile and enable the gki
config keys for kona target compilation.
Change-Id: I39422750ac6000078278ddc7705e7148f6b0ae6b
Signed-off-by: Kai Xing <quic_kxing@quicinc.com>
Disable DSI ctrl regulator while entering deepsleep and restore
during resume. Refactor deepsleep related code to helper function.
Change-Id: If6da0471db59fbdfa9d9855ee1464fcab90cae15
Signed-off-by: Venkata Prahlad Valluru <quic_vvalluru@quicinc.com>
Signed-off-by: Sai Srujana Oruganti <quic_osaisruj@quicinc.com>
In case of dual dsi usecase, since both the encoders use
the same CTL path, this change ensures that uidle ctl
settings are updated only by the master encoder.
Change-Id: I7bd75ae0195d34f0c1810403fa5e390fbaa64ed0
Signed-off-by: Yashwanth <quic_yvulapu@quicinc.com>
This change enables minidump for register dumps, debug bus collection
based on CONFIG_QCOM_VA_MINIDUMP config. The minidump driver in 5.4 kernel
needs physical contiguous memory allocation as a requirement. The
minidump collection failure is seen with commit fdf36d7124
("disp: msm: use vzalloc for large allocations") and it uses
vzalloc to address memory allocation failure with order 5. This
patch will disable minidump collection for regdumps, debug bus
to address minidump collection failure.
Change-Id: If5ff91ff95279ee2997765599dbeab16ac2dae60
Signed-off-by: Jayaprakash Madisetty <quic_jmadiset@quicinc.com>
This property skips the panel power off for panels
with in-cell design.
Change-Id: I61ff7b8696940b74a58c79eef5b9cd43fd551c01
Signed-off-by: Sai Srujana Oruganti <quic_osaisruj@quicinc.com>
When there is no ulp load entry, ulp load should be set to
enable load.
Change-Id: I531108b4d2137cf9262874bc411ff06592302374
Signed-off-by: Sai Srujana Oruganti <quic_osaisruj@quicinc.com>
Currently we are handling only write command transfer failures from
dsi host transfer path. Modify check to handle read command transfer
failures.
Change-Id: Iee1dbf46a4374819e6d6425eb5acece8ec1fb8b1
Signed-off-by: Srihitha Tangudu <quic_tangudu@quicinc.com>
Currently link clk parent set/unset are done as part of dsi_prepare
and dsi_unprepare, but in case of deepsleep with display ON, these
will not be called. Due to mismatch in parent between clk
framework and actual parent, subsequent clk_set_parent will
early return without setting the parent.
To avoid this condition, do set parent to xo, as part of
pm_suspend and restore to link clk source in pm_resume.
Change-Id: I626899304580f9d9fbcc92cd8b139cd89cd48999
Signed-off-by: Venkata Prahlad Valluru <quic_vvalluru@quicinc.com>
It has been observed that TE check may fail even if status read
is passing. Panel detection should be successful only if both
TE check and register read (if supported) pass.
Change-Id: I8d2c5d4139561fe533fc148124b7dde54b63c24e
Signed-off-by: Kashish Jain <quic_kashjain@quicinc.com>
Large allocations using kzalloc can lead to timeouts. This updates
the allocation calls accordingly to use vzalloc to remove
requirements on contiguous memory.
Change-Id: Ica54483787509ed0e9283289fc9d523e8cde9238
Signed-off-by: Nilaan Gunabalachandran <quic_ngunabal@quicinc.com>
Signed-off-by: Jayaprakash Madisetty <quic_jmadiset@quicinc.com>
