I am pretty sure prod builds don't need this to be enabled and was
meant originally to be used in the development phase.
Further, dmesg shows that it fails to open the file:
aw_cali_get_read_cali_re:channel:1 open /mnt/vendor/persist/factory/audio/aw_cali.bin failed!
Change-Id: I61c5151ba23a1d117b54dd2eb0c0f482da7d941a
Signed-off-by: Forenche <prahul2003@gmail.com>
techpack/display/msm/dsi/dsi_panel.c:1326:3: error: misleading indentation; sta
tement is not part of the previous 'if' [-Werror,-Wmisleading-indentation]
1326 | rc = dsi_panel_send_param_cmd(panel, param_info);
| ^
techpack/display/msm/dsi/dsi_panel.c:1323:2: note: previous statement is here
1323 | if (panel->lhbm_config.lhbm_wait_for_fps_valid && param_info->value == HBM_FOD_ON_STATE)
| ^
Broken code was added by Motorola:
d67e46e138
Change-Id: If122cbae26b5e8a23f9766cf685d3a3599adc8f5
Signed-off-by: Sevenrock <sevenrock@hotmail.de>
Based on tag 'MMI-U1UGS34.23-110-23-2' of https://github.com/MotorolaMobilityLLC/motorola-kernel-modules
Fogos push for Android 14
* staging/motorola-kernel-modules/MMI-U1UGS34.23-110-23-2: (3149 commits)
Documentation: Remove slg51000.txt
treewide: Remove conflicting Makefiles
include: Remove unused synaptics_tcm.h header
fs: Remove exfat drivers
dlkm: goodix_fod_mmi: fix KE issue
dlkm: goodix_fod: support drm panel notification
moto_swap: Add reset_bdev to close backing dev for ramboost2.0
add page fault pages to list head to avoid be swapped out soon
fogos: TP: open 1st icnl9916c force up config
workaround fix long page fault issue
Revert "(CR) moto_swap: Add SWP_SYNCHRONOUS_IO cmd for ioctl"
fix null pointer at quota_day_store
moto_swap: Add SWP_SYNCHRONOUS_IO cmd for ioctl
charge: config qg iterm small than FCC
moto_swap:fix kernel panic on memcg conf
Moto kernel protection module
Add macro to close debug function in user build
fogo/motorola:Fogo 5g na optimize stowed mode
input: goodix_berlin: enable palm cancel for report id
Update UWB driver to version 7.4
...
Conflicts:
Documentation/devicetree/bindings~HEAD
Change-Id: I1e380097e692b2efea451cbcf4dc42d972e6dd5a
Fogos push for Android 14
* tag 'MMI-U1UGS34.23-110-23-2' of https://github.com/MotorolaMobilityLLC/kernel-msm-5.4-techpack-display: (116 commits)
dsi_panel: panel_feature: corret the code mistake
dsi_panel: fix the bug of local HBM
gpu/msm: check fps value before enable lhbm
msm/display-drivers: release lhbm resource
dsi/dfps: update the dfps code to support "OLED+vid mode"
dsi/dfps: set the right fps when panel resume
Support 120Hz command sending
dts/display: [bangkok] update the dsc configure for tianma panel
display-drivers: local hbm: add suport for dc_hybird_threshold
optimze lcd log
kernel:pnangn:update 2nd panel brightness settings to 11bits
kernel/panel:power on/off reset sequence
display/backlight: support hbm dcs only with 51 cmd
display/dsi:add new lcd backlight align type for bit11_4
display: The lcd backlight shift mode update
drm_ioctl: add return value for set_param
drm/dsi_panel: resend hbm off commands
msm/drm:compatible with different hbm table in panel
drm/msm:add delay between mipi0 to reset0 when power off
drm/panel: check panel status before send custom commands
...
Conflicts:
techpack/display/msm/sde/sde_connector.c
techpack/display/msm/sde/sde_kms.c
Change-Id: I13ede04c21415717cd009ae73871894f1be74927
Fogos push for Android 14
* tag 'MMI-U1UGS34.23-110-23-2' of https://github.com/MotorolaMobilityLLC/kernel-msm-5.4-techpack-camera: (86 commits)
fogo: fix tombstone when use secure camera
fogo: Fix secure mode switch error (2/2)
Bangkk: reset ois when read standby_flag fail
fogos: Actuator noise reduction[2/2]
fogor: Actuator noise reduction[2/2]
bangkk: Powerup and initialize sensor early [3/4]
bangkk: Fix flash request GPIO-24 failed
bangkk: support dw9784 af drift
bangkk: Open Camera preview will be black then camera error
bangkk: open Camera preview may be black sometimes
bangkk: dw9784 ois bring up
bangkk: Secondary supply flash driver ic compatible
Tundra: restore ois delete submit
Tundra: add delay at check ois data_ready
Revert "(CR): milanf: modify ois vsync irq processing flow"
penang: Adjust actuator noise reduction
penang: Adjust actuator noise reduction
penang: Actuator noise reduction
milanf: modify ois vsync irq processing flow
camera: ois: avoid ois power down twice when download firmware failed
...
Conflicts:
techpack/camera/drivers/cam_sensor_module/cam_ois/cam_ois_core.c
Change-Id: I9aa733fcd4412059a267c7cb9408b05e91eba111
Fogos push for Android 14
* tag 'MMI-U1UGS34.23-110-23-2' of https://github.com/MotorolaMobilityLLC/kernel-msm-5.4-techpack-audio: (79 commits)
Revert "asoc: msm-compress : Fix for CTS-on-gsi with gki"
soc: swr-mstr-ctrl: allow runtime suspend first before system suspend
audio:add lock for aw dynamics set dailink
Revert "(CR):audio:add lock for aw dynamics set dailink"
dsp: q6lsm: Address use after free for mmap handle
dsp: q6lsm: Add check for payload buffer
ASoC: msm-pcm-host-voice: Check validity of session idx
audio:add lock for aw dynamics set dailink
q6fsm:add protect for fs1815 algo
fs1815:correct rotation code
aw882xxacf: add hac scene algo ctrl
audio-kernel: fix build fail caused by aw8838
techpack:add aw8838 driver
fsm:correct fsm vbat monitor logic
audio/dsp:reduce fsm vbat monitor retry times
audio/asoc:add PRI_MI2S_TX_HOSTLESS
machie_driver:add aw pri I2S dailink
audio:add fs1815 bypass algo code and logic.
Awinic: update communicate with adsp logic
codecs:add fs1815 PA driver
...
Conflicts:
techpack/audio/dsp/q6lsm.c
Change-Id: I6ec23f0d578fd2494e5e29577ce470dc2cb90f5c
Fogos push for Android 14
* tag 'MMI-U1UGS34.23-110-23-2' of https://github.com/MotorolaMobilityLLC/vendor-qcom-opensource-wlan-qcacld-3.0: (55 commits)
qcacld-3.0: Remove use-after-free of frame in tx mgmt send
qcacld-3.0: Ignore CSA request for invalid channel
Revert "qcacld-3.0: Fix OOB issue when access wma_find_vdev_by_addr"
qcacld-3.0: Fix OOB issue when access wma_find_vdev_by_addr
remove invoking "sock_from_file" function
Print the process which is receiving data
fix wifi reconnect issue
wlan: Support loading moto specific ini configurations
Revert "qcacld-3.0: Change PCL for throughput case in case of STA+GO"
: Revert "qcacld-3.0: Add support to flush fragments for a particular peer"
qcacld-3.0: Modify check to ensure consecutive PN for frags
qcacld-3.0: Drop mcast and plaintext frags in protected network
qcacld-3.0: Flush frags for peer on add key request
qcacld-3.0: Add support to flush fragments for a particular peer
use NONHLOS_PLATFORM_COMMON_PATH
sm4350: Store WLAN Unstripped and ELF in build archives
fix compile errors
prop (CR) the MAC address more appropriately
lito: Update FW version for R
- Update wifimacaddr command line arg
...
Change-Id: Ibb7fd5d5df7ee9fd07a78069cc9b385c1bf34121
