msm: camera: tfe: Fix variable initialization issues
msm: camera: isp: Dual tfe event check with proper hw idx
msm: camera: smmu: Add support for non-contiguous mermory region
msm: camera: smmu: Use iommu best match algo for camera
msm: camera: ope: Optimize allocation of IO configuration
msm: camera: ope: Fix for KW Issues
msm: camera: ope: Add support for stripe level height configuration
msm: camera: tfe: Enable the delay line clc
msm: camera: ope: Fix false alarm for OPE HW timeout
msm: camera: tfe: Support register dump per request
msm: camera: ope: Increase max number of stripes
msm: camera: ope: Change packer and unpacker format in case NV12
msm: camera: tfe: Add packet code get command for tfe
msm: camera: ope: Trigger recovery in case of violation on write bus
msm: camera: ope: Protect ope hw reset with mutex
msm: camera: ope: Add a check for valid request in cdm callback
msm: camera: ope: Remove the BW & clock vote in release context
msm: camera: ope: Reduce OPE BUS memory
msm: camera: ope: Fix return value for ope acquire
msm: camera: ope: Fix false alarm for OPE request timeout
msm: camera: ope: Avoid deadlock during recovery after HW hang
msm: camera: tfe: tfe debug enhancement
msm: camera: cdm: Fix irq_data value in case of inline irq
msm: camera: flash: Switch off flash on provider crash
msm: camera: ope: Initialize ope hw mutex structure
msm: camera: cdm: Flush all available FIFOs during reset
msm: camera: cpas: Add mandatory bw option for axi ports clocks
msm: camera: ope: Use vzalloc to allocate the write bus ctx structure
msm: camera: ope: Fix handling of init hw failure
msm: camera: tfe: Enable per frame register dump for rdi only context
msm: camera: cdm: Protect cdm core status bits with mutex
msm: camera: cdm: correct the error check in cmd submit irq
msm: camera: ope: Fix unclock access during HW reset
msm: camera: ope: Program frame level settings after idle event
msm: camera: ope: Delay releasing of resources for last context
msm: camera: isp: Increase default SOF freeze timeout
msm: camera: smmu: Add map and unmap monitor
msm: camera: isp: Add trace events across ISP
msm: camera: smmu: Profile time taken for map, unmap
msm: camera: ope: Start context timer on receiving new request
msm: camera: tfe: Reduce stack size during set axi bw
msm: camera: cdm: Check for HW state before dumping registers
msm: camera: ope: Reduce stack footprint during acquire
msm: camera: tfe: Disable clock if tfe2 is not supported
msm: camera: cdm: Avoid cdm pause incase of BL submit
msm: camera: tfe: Optimize CSID IRQ logging
msm: camera: ope: Move request id validity check outside of lock
msm: camera: tfe: Correct the tfe hw manager dump logic
msm: camera: ope: Synchronize flush and submit BLs
msm: camera: cdm: Protect cdm reset status
msm: camera: cdm: Handle cdm deinit sequence properly
msm: camera: tfe: Reduce reset timeout to 100ms
msm: camera: ope: Fix hang detection
msm: camera: ope: Make non-fatal logs as debug and info logs
msm: camera: tfe: set overflow pending bit to zero after HW reset
msm: camera: ope: Do not disable CDM during error handling
msm: camera: ope: Add support for OPE Replay
msm: camera: ope: Stop OPE in case of init failure
msm: camera: ope: Synchronize process cmd and flush request
msm: camera: cdm: Fix CDM IRQ handling
msm: camera: tfe: LDAR dump for TFE
msm: camera: ope: Fix the length check for debug buffer
msm: camera: cdm: Fix CDM reset logic
msm: camera: ope: Dump debug registers in case of HW hang
msm: camera: tfe: Support the RDI bus port for line based mode
msm: camera: cdm: Handle out of order reset done events
msm: camera: ope: Consider other contexts during timeout
msm: camera: ope: Put GenIRQ in last stripe BL
msm: camera: tfe: Process the rdi interrupts for rdi only resource
msm: camera: jpeg: Check the HW state before accessing register
msm: camera: csiphy: Update csiphy power-up sequence for lito v2
msm: camera: cdm: Secure freeing of request lists using locks
msm: camera: cpas: Add support for Scuba camnoc
msm: camera: csiphy: Clear secure phy flags on release
msm: camera: tfe: validate the tfe bw num paths
msm: camera: ope: Reorder the reset order in ope acquire
msm: camera: ope: Dump debug registers in case of reset failure
msm: camera: ope: Add logic to detect hang in CDM
msm: camera: isp: Increase max count of cfg to support more init packets
msm: camera: core: Fix cpas axi clk rate overflow.
CRs-Fixed: 2668666
Change-Id: I882ca4bd117bebc7d1c62bc82299d69d7b5c9388
Signed-off-by: Trishansh Bhardwaj <tbhardwa@codeaurora.org>
num_cfg_new temp variable should be assigned the value of
num_hw_entries from new isp request instead of old isp request.
CRs-Fixed: 2673657
Change-Id: Ie4d29949e2c992560b6635f7e0b5db88c2dafd48
Signed-off-by: Vishalsingh Hajeri <vhajeri@codeaurora.org>
TFE hardware compilation needs to be enable with correct flag.
Correct tfe compilation flag along with necessary base Makefile
change. Also, remove unnecessary makefiles from tfe hw module.
CRs-Fixed: 2675526
Change-Id: Ibd8b8f5acc4f843bf373e14a9c8e3bc41cb58839
Signed-off-by: Jigarkumar Zala <jzala@codeaurora.org>
There is high chances, when camera server crash flash may not have
flash off request scheduled with CRM. In case of torch on, followed
by shutdown sequence, if flash off request is not scheduled, flash
remains turned on. This change adds flash off operation, in case
of shutdown.
CRs-Fixed: 2691916
Change-Id: I472f2b204b93d0cdc3d8a1f14fff29ab479e4588
Signed-off-by: Jigarkumar Zala <jzala@codeaurora.org>
Aligns the uapi header types and includes to be in-line with upstream
kernel formatting. The errors are given by enabling the UAPI_HEADER_TEST
config, which is now enabled in GKI builds.
CRs-Fixed: 2679250
Change-Id: I195fb2aab9251043fc63d79dd31f2db53b1228f5
Signed-off-by: Karthik Jayakumar <kjayakum@codeaurora.org>
Some driver probes do not have a real dependency on other
driver probes. Still, they are blocked from creating subdev
nodes if that driver's probe comes after all nodes were created
in master component bind. Add subdev node at the time of subdev
register itself, to lift this requirement.
CRs-Fixed: 2686729
Change-Id: I3505071a79296dd7d5665b13d533a9a022aa1a85
Signed-off-by: Mukund Madhusudan Atre <matre@codeaurora.org>
Update the master status data type, as it expects the negative value
and do the operation accordingly. Also, correct the return code and
update the validation check.
CRs-Fixed: 2686717
Change-Id: I8ecae74de2995a08e532a7f0ef078d48d45a928e
Signed-off-by: Jigarkumar Zala <jzala@codeaurora.org>
The last reported request ID indicates the request ID for which
the shutter was sent last. Only update this field for requests
that have not bubbled in a given IFE ctx.
CRs-Fixed: 2680502
Change-Id: I9ee4b479fe95800efa40ea1ff8d840fc79ef6528
Signed-off-by: Karthik Anantha Ram <kartanan@codeaurora.org>
For secure mode, csiphy driver ask for secure stream. Currently
this call always return success. This change return the appropriate
result of failure/success.
CRs-Fixed: 2673418
Change-Id: Ib425ad77e6481888acefdaf843256602aa759cf3
Signed-off-by: Jigarkumar Zala <jzala@codeaurora.org>
Some mfhdr usecases require more than 1024 fences because of
delayed request processing and bypass. Increase maximum number
of fences or sync objects to 2048.
CRs-Fixed: 2598592
Change-Id: If11fa2986fce0cd97c14370d29a117230134d6f5
Signed-off-by: Mukund Madhusudan Atre <matre@codeaurora.org>
Turn off the flash while flushing if the flushed request is
flash off and removed flush request ID validation in flush_all
scenario.
CRs-Fixed: 2667472
Change-Id: Iaf123f2f56117d7b7d1ef6d2291b0cde8c232d44
Signed-off-by: Anil Kumar Kanakanti <akanakan@codeaurora.org>
The BW config coming from user space functions based on
usage type as single or dual. Checking the validity of bw
vote based on hw index caused bw updates to be ignored from
isp side. Fix checking for valid bw vote by falling back to
walking through all indices.
CRs-Fixed: 2669422
Change-Id: I5762fb06c8b69ade286d890146e91844fbde5ce7
Signed-off-by: Mukund Madhusudan Atre <matre@codeaurora.org>
In bw voting for ahb and axi, interconnect API requires
bw values in KBps. Add conversion to icc compatible units
before voting to interconnect framework.
CRs-Fixed: 2664087
Change-Id: If64c2bcbd20a3e2ad9f738e18955d5a8256d715c
Signed-off-by: Mukund Madhusudan Atre <matre@codeaurora.org>
Changes extraneous CAM_INFO logs into CAM_DBG logs in order to help
de-clutter serial boot logs.
CRs-Fixed: 2669269
Change-Id: I7589bd64363aa122c46e1193c68bbf49d78a4a9a
Signed-off-by: Karthik Jayakumar <kjayakum@codeaurora.org>
Lane enable register reset is not required any delay to reflect the
change. This change removes the unnecesaary delay from lane_enable
register. Also, adding 1us of delay between back to back write in
SW reset register along with condition based refelction of delay.
CRs-Fixed: 2671221
Change-Id: I010570045a97fc1489a84d22ebd39df6f6f14f0a
Signed-off-by: Jigarkumar Zala <jzala@codeaurora.org>
Update 2phase and 3phase bring up sequence for different
data rate to reflect latest hpg change.
CRs-Fixed: 2671221
Change-Id: Idd7445a523486a5fb4ec5d43bcf8987c54c089b0
Signed-off-by: Jigarkumar Zala <jzala@codeaurora.org>
Add map and unmap events in monitor array for each
context bank and dump the last set of events whenever
some smmu related issue happens.
CRs-Fixed: 2538876
Change-Id: I18941e9a64ebd6828419e13471938bb32438122c
Signed-off-by: Pavan Kumar Chilamkurthi <pchilamk@codeaurora.org>
Use best fit match algo for smmu map instead of first match
algo to avoid fragmentation in smmu virtual space.
CRs-Fixed: 2580128
Change-Id: I434e6e4396bc713e6e12e3da7ae4b78cc2da6a42
Signed-off-by: Pavan Kumar Chilamkurthi <pchilamk@codeaurora.org>
Add support to discard a memory region inside the full dma map
virtual address space region.
CRs-Fixed: 2580128
Change-Id: I76cc778f2437a01a4efabec836ce92c47d983d61
Signed-off-by: Pavan Kumar Chilamkurthi <pchilamk@codeaurora.org>
