Commit graph

896,620 commits

Author SHA1 Message Date
Greg Kroah-Hartman
15a2cff2b5 Revert "USB: HCD: Fix URB giveback issue in tasklet function"
This reverts commit 5d952c7ae3 which is
commit 26c6c2f8a907c9e3a2f24990552a4d77235791e6 upstream.

It breaks the Android GKI kernel abi, and is not needed for Android
devices, so revert it for now.  If it is needed for this branch, it can
come back later in an ABI-stable way.

Bug: 161946584
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I7cebceb7c3e1eccf4a36a18dbe0e7ec21378b719
2022-08-30 12:25:17 +02:00
Greg Kroah-Hartman
05426a3d4f This is the 5.4.211 stable release
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEZH8oZUiU471FcZm+ONu9yGCSaT4FAmMHPogACgkQONu9yGCS
 aT6GgQ//eILgoV9jHOdWFDlOqWz80zTFxPo2d1Fyd+jKbxI9Joj6raMfyhbNQA5z
 sNS6B21FTC1V9TkPwt3/TaghYZlBvYutcIUWVgxvKHM2m2QCyiS6Y7VgfnqTVU2J
 C6Ri0zabWf0X2eahdDAd0uOxhejSbewo+3Xfv2Y090kOWKxj5b1SjQoo7/OapBFi
 8ZZ60qamP5/Qfs3rTiVNDYHqY+n1okYuOpEL78Zh/imGC71ZfyKVZgAe/WHHaXtQ
 KBug0mmr/9K2yMFYdXmuPdOZrS66A2sklsaw+WdXIboZKhAMF16KkkNvN2BExX5G
 Hf03MRfCAEFDndhGO16X07WDNIr/CQaEYLjAn6PE1cGnIncQMw2vyWMHGiNlOdLO
 JZiOcyVEW6cao7vLmQD/Rk6x44nOlm+ttzxMD2spHwAU4tSM7aM0SrAvM201R8Vc
 6hs6m1+NQr9XNEiH+QT+A4+cbIeOd/b8hkQdjB/uvlS0HTUNu4SGNlL7s3nwuB8D
 a1chV1VbmYfIjSyY6ffr3hNrTHfHSZN2M5otK2iDmvYlTrrbOAu6sPXCWHKskKSf
 Dm43Le+NaZmBHSS36ejcQKGdNpZ35H7uQ89bzuo5/kisQ4fY4VnQSYFNgmnRAY+s
 nOvbrj7M4K+QvumYBT1efoMrMYgXRYQSQOc03Mq7AQYuJBrQv/4=
 =U/Z1
 -----END PGP SIGNATURE-----

Merge 5.4.211 into android11-5.4-lts

Changes in 5.4.211
	Makefile: link with -z noexecstack --no-warn-rwx-segments
	x86: link vdso and boot with -z noexecstack --no-warn-rwx-segments
	scsi: Revert "scsi: qla2xxx: Fix disk failure to rediscover"
	ALSA: bcd2000: Fix a UAF bug on the error path of probing
	igc: Remove _I_PHY_ID checking
	wifi: mac80211_hwsim: fix race condition in pending packet
	wifi: mac80211_hwsim: add back erroneously removed cast
	wifi: mac80211_hwsim: use 32-bit skb cookie
	add barriers to buffer_uptodate and set_buffer_uptodate
	HID: wacom: Only report rotation for art pen
	HID: wacom: Don't register pad_input for touch switch
	KVM: nVMX: Snapshot pre-VM-Enter BNDCFGS for !nested_run_pending case
	KVM: nVMX: Snapshot pre-VM-Enter DEBUGCTL for !nested_run_pending case
	KVM: SVM: Don't BUG if userspace injects an interrupt with GIF=0
	KVM: nVMX: Let userspace set nVMX MSR to any _host_ supported value
	KVM: x86: Mark TSS busy during LTR emulation _after_ all fault checks
	KVM: x86: Set error code to segment selector on LLDT/LTR non-canonical #GP
	mm/mremap: hold the rmap lock in write mode when moving page table entries.
	ALSA: hda/conexant: Add quirk for LENOVO 20149 Notebook model
	ALSA: hda/cirrus - support for iMac 12,1 model
	ALSA: hda/realtek: Add quirk for another Asus K42JZ model
	tty: vt: initialize unicode screen buffer
	vfs: Check the truncate maximum size in inode_newsize_ok()
	fs: Add missing umask strip in vfs_tmpfile
	thermal: sysfs: Fix cooling_device_stats_setup() error code path
	fbcon: Fix boundary checks for fbcon=vc:n1-n2 parameters
	usbnet: Fix linkwatch use-after-free on disconnect
	ovl: drop WARN_ON() dentry is NULL in ovl_encode_fh()
	parisc: Fix device names in /proc/iomem
	parisc: io_pgetevents_time64() needs compat syscall in 32-bit compat mode
	drm/gem: Properly annotate WW context on drm_gem_lock_reservations() error
	drm/nouveau: fix another off-by-one in nvbios_addr
	drm/amdgpu: Check BO's requested pinning domains against its preferred_domains
	iio: light: isl29028: Fix the warning in isl29028_remove()
	fuse: limit nsec
	serial: mvebu-uart: uart2 error bits clearing
	md-raid10: fix KASAN warning
	ia64, processor: fix -Wincompatible-pointer-types in ia64_get_irr()
	PCI: Add defines for normal and subtractive PCI bridges
	powerpc/fsl-pci: Fix Class Code of PCIe Root Port
	powerpc/ptdump: Fix display of RW pages on FSL_BOOK3E
	powerpc/powernv: Avoid crashing if rng is NULL
	MIPS: cpuinfo: Fix a warning for CONFIG_CPUMASK_OFFSTACK
	coresight: Clear the connection field properly
	USB: HCD: Fix URB giveback issue in tasklet function
	ARM: dts: uniphier: Fix USB interrupts for PXs2 SoC
	arm64: dts: uniphier: Fix USB interrupts for PXs3 SoC
	netfilter: nf_tables: do not allow SET_ID to refer to another table
	netfilter: nf_tables: do not allow RULE_ID to refer to another chain
	netfilter: nf_tables: fix null deref due to zeroed list head
	epoll: autoremove wakers even more aggressively
	x86: Handle idle=nomwait cmdline properly for x86_idle
	arm64: Do not forget syscall when starting a new thread.
	arm64: fix oops in concurrently setting insn_emulation sysctls
	ext2: Add more validity checks for inode counts
	genirq: Don't return error on missing optional irq_request_resources()
	wait: Fix __wait_event_hrtimeout for RT/DL tasks
	ARM: dts: imx6ul: add missing properties for sram
	ARM: dts: imx6ul: change operating-points to uint32-matrix
	ARM: dts: imx6ul: fix csi node compatible
	ARM: dts: imx6ul: fix lcdif node compatible
	ARM: dts: imx6ul: fix qspi node compatible
	spi: synquacer: Add missing clk_disable_unprepare()
	ARM: OMAP2+: display: Fix refcount leak bug
	ACPI: EC: Remove duplicate ThinkPad X1 Carbon 6th entry from DMI quirks
	ACPI: PM: save NVS memory for Lenovo G40-45
	ACPI: LPSS: Fix missing check in register_device_clock()
	arm64: dts: qcom: ipq8074: fix NAND node name
	arm64: dts: allwinner: a64: orangepi-win: Fix LED node name
	ARM: shmobile: rcar-gen2: Increase refcount for new reference
	PM: hibernate: defer device probing when resuming from hibernation
	selinux: Add boundary check in put_entry()
	spi: spi-rspi: Fix PIO fallback on RZ platforms
	ARM: findbit: fix overflowing offset
	meson-mx-socinfo: Fix refcount leak in meson_mx_socinfo_init
	ARM: bcm: Fix refcount leak in bcm_kona_smc_init
	x86/pmem: Fix platform-device leak in error path
	ARM: dts: ast2500-evb: fix board compatible
	ARM: dts: ast2600-evb: fix board compatible
	soc: fsl: guts: machine variable might be unset
	ARM: dts: qcom: mdm9615: add missing PMIC GPIO reg
	ARM: OMAP2+: Fix refcount leak in omapdss_init_of
	ARM: OMAP2+: Fix refcount leak in omap3xxx_prm_late_init
	cpufreq: zynq: Fix refcount leak in zynq_get_revision
	soc: qcom: aoss: Fix refcount leak in qmp_cooling_devices_register
	ARM: dts: qcom: pm8841: add required thermal-sensor-cells
	bus: hisi_lpc: fix missing platform_device_put() in hisi_lpc_acpi_probe()
	arm64: dts: mt7622: fix BPI-R64 WPS button
	erofs: avoid consecutive detection for Highmem memory
	blk-mq: don't create hctx debugfs dir until q->debugfs_dir is created
	regulator: of: Fix refcount leak bug in of_get_regulation_constraints()
	nohz/full, sched/rt: Fix missed tick-reenabling bug in dequeue_task_rt()
	thermal/tools/tmon: Include pthread and time headers in tmon.h
	dm: return early from dm_pr_call() if DM device is suspended
	ath10k: do not enforce interrupt trigger type
	wifi: rtlwifi: fix error codes in rtl_debugfs_set_write_h2c()
	drm/mipi-dbi: align max_chunk to 2 in spi_transfer
	drm/radeon: fix potential buffer overflow in ni_set_mc_special_registers()
	drm/mediatek: Add pull-down MIPI operation in mtk_dsi_poweroff function
	drm: adv7511: override i2c address of cec before accessing it
	i2c: Fix a potential use after free
	media: tw686x: Register the irq at the end of probe
	ath9k: fix use-after-free in ath9k_hif_usb_rx_cb
	wifi: iwlegacy: 4965: fix potential off-by-one overflow in il4965_rs_fill_link_cmd()
	drm: bridge: adv7511: Add check for mipi_dsi_driver_register
	drm/mcde: Fix refcount leak in mcde_dsi_bind
	media: hdpvr: fix error value returns in hdpvr_read
	drm/vc4: plane: Remove subpixel positioning check
	drm/vc4: plane: Fix margin calculations for the right/bottom edges
	drm/vc4: dsi: Correct DSI divider calculations
	crypto: arm64/gcm - Select AEAD for GHASH_ARM64_CE
	drm/rockchip: vop: Don't crash for invalid duplicate_state()
	drm/rockchip: Fix an error handling path rockchip_dp_probe()
	drm/mediatek: dpi: Remove output format of YUV
	drm/mediatek: dpi: Only enable dpi after the bridge is enabled
	drm: bridge: sii8620: fix possible off-by-one
	drm/msm/mdp5: Fix global state lock backoff
	crypto: hisilicon - Kunpeng916 crypto driver don't sleep when in softirq
	media: platform: mtk-mdp: Fix mdp_ipi_comm structure alignment
	mediatek: mt76: mac80211: Fix missing of_node_put() in mt76_led_init()
	drm/exynos/exynos7_drm_decon: free resources when clk_set_parent() failed.
	tcp: make retransmitted SKB fit into the send window
	libbpf: Fix the name of a reused map
	selftests: timers: valid-adjtimex: build fix for newer toolchains
	selftests: timers: clocksource-switch: fix passing errors from child
	fs: check FMODE_LSEEK to control internal pipe splicing
	wifi: wil6210: debugfs: fix info leak in wil_write_file_wmi()
	wifi: p54: Fix an error handling path in p54spi_probe()
	wifi: p54: add missing parentheses in p54_flush()
	selftests/bpf: fix a test for snprintf() overflow
	can: pch_can: do not report txerr and rxerr during bus-off
	can: rcar_can: do not report txerr and rxerr during bus-off
	can: sja1000: do not report txerr and rxerr during bus-off
	can: hi311x: do not report txerr and rxerr during bus-off
	can: sun4i_can: do not report txerr and rxerr during bus-off
	can: kvaser_usb_hydra: do not report txerr and rxerr during bus-off
	can: kvaser_usb_leaf: do not report txerr and rxerr during bus-off
	can: usb_8dev: do not report txerr and rxerr during bus-off
	can: error: specify the values of data[5..7] of CAN error frames
	can: pch_can: pch_can_error(): initialize errc before using it
	Bluetooth: hci_intel: Add check for platform_driver_register
	i2c: cadence: Support PEC for SMBus block read
	i2c: mux-gpmux: Add of_node_put() when breaking out of loop
	wifi: wil6210: debugfs: fix uninitialized variable use in `wil_write_file_wmi()`
	wifi: iwlwifi: mvm: fix double list_add at iwl_mvm_mac_wake_tx_queue
	wifi: libertas: Fix possible refcount leak in if_usb_probe()
	net/mlx5e: Fix the value of MLX5E_MAX_RQ_NUM_MTTS
	crypto: inside-secure - Add missing MODULE_DEVICE_TABLE for of
	iavf: Fix max_rate limiting
	netdevsim: Avoid allocation warnings triggered from user space
	net: rose: fix netdev reference changes
	dccp: put dccp_qpolicy_full() and dccp_qpolicy_push() in the same lock
	clk: renesas: r9a06g032: Fix UART clkgrp bitsel
	mtd: maps: Fix refcount leak in of_flash_probe_versatile
	mtd: maps: Fix refcount leak in ap_flash_init
	mtd: rawnand: meson: Fix a potential double free issue
	HID: cp2112: prevent a buffer overflow in cp2112_xfer()
	mtd: sm_ftl: Fix deadlock caused by cancel_work_sync in sm_release
	mtd: partitions: Fix refcount leak in parse_redboot_of
	mtd: st_spi_fsm: Add a clk_disable_unprepare() in .probe()'s error path
	fpga: altera-pr-ip: fix unsigned comparison with less than zero
	usb: host: Fix refcount leak in ehci_hcd_ppc_of_probe
	usb: ohci-nxp: Fix refcount leak in ohci_hcd_nxp_probe
	usb: xhci: tegra: Fix error check
	clk: mediatek: reset: Fix written reset bit offset
	misc: rtsx: Fix an error handling path in rtsx_pci_probe()
	driver core: fix potential deadlock in __driver_attach
	clk: qcom: clk-krait: unlock spin after mux completion
	usb: host: xhci: use snprintf() in xhci_decode_trb()
	clk: qcom: ipq8074: fix NSS port frequency tables
	clk: qcom: ipq8074: set BRANCH_HALT_DELAY flag for UBI clocks
	clk: qcom: camcc-sdm845: Fix topology around titan_top power domain
	soundwire: bus_type: fix remove and shutdown support
	intel_th: Fix a resource leak in an error handling path
	intel_th: msu-sink: Potential dereference of null pointer
	intel_th: msu: Fix vmalloced buffers
	staging: rtl8192u: Fix sleep in atomic context bug in dm_fsync_timer_callback
	mmc: sdhci-of-esdhc: Fix refcount leak in esdhc_signal_voltage_switch
	memstick/ms_block: Fix some incorrect memory allocation
	memstick/ms_block: Fix a memory leak
	mmc: sdhci-of-at91: fix set_uhs_signaling rewriting of MC1R
	scsi: smartpqi: Fix DMA direction for RAID requests
	usb: gadget: udc: amd5536 depends on HAS_DMA
	RDMA/hns: Fix incorrect clearing of interrupt status register
	RDMA/siw: Fix duplicated reported IW_CM_EVENT_CONNECT_REPLY event
	RDMA/hfi1: fix potential memory leak in setup_base_ctxt()
	gpio: gpiolib-of: Fix refcount bugs in of_mm_gpiochip_add_data()
	mmc: cavium-octeon: Add of_node_put() when breaking out of loop
	mmc: cavium-thunderx: Add of_node_put() when breaking out of loop
	HID: alps: Declare U1_UNICORN_LEGACY support
	PCI: tegra194: Fix Root Port interrupt handling
	PCI: tegra194: Fix link up retry sequence
	USB: serial: fix tty-port initialized comments
	platform/olpc: Fix uninitialized data in debugfs write
	mm/mmap.c: fix missing call to vm_unacct_memory in mmap_region
	RDMA/rxe: Fix error unwind in rxe_create_qp()
	null_blk: fix ida error handling in null_add_dev()
	jbd2: fix outstanding credits assert in jbd2_journal_commit_transaction()
	ext4: recover csum seed of tmp_inode after migrating to extents
	jbd2: fix assertion 'jh->b_frozen_data == NULL' failure when journal aborted
	opp: Fix error check in dev_pm_opp_attach_genpd()
	ASoC: mediatek: mt8173: Fix refcount leak in mt8173_rt5650_rt5676_dev_probe
	ASoC: mt6797-mt6351: Fix refcount leak in mt6797_mt6351_dev_probe
	ASoC: codecs: da7210: add check for i2c_add_driver
	ASoC: mediatek: mt8173-rt5650: Fix refcount leak in mt8173_rt5650_dev_probe
	serial: 8250_dw: Store LSR into lsr_saved_flags in dw8250_tx_wait_empty()
	ASoC: codecs: msm8916-wcd-digital: move gains from SX_TLV to S8_TLV
	ASoC: codecs: wcd9335: move gains from SX_TLV to S8_TLV
	profiling: fix shift too large makes kernel panic
	tty: n_gsm: fix non flow control frames during mux flow off
	tty: n_gsm: fix packet re-transmission without open control channel
	tty: n_gsm: fix race condition in gsmld_write()
	remoteproc: qcom: wcnss: Fix handling of IRQs
	vfio/ccw: Do not change FSM state in subchannel event
	tty: n_gsm: fix wrong T1 retry count handling
	tty: n_gsm: fix DM command
	tty: n_gsm: fix missing corner cases in gsmld_poll()
	iommu/exynos: Handle failed IOMMU device registration properly
	rpmsg: qcom_smd: Fix refcount leak in qcom_smd_parse_edge
	kfifo: fix kfifo_to_user() return type
	mfd: t7l66xb: Drop platform disable callback
	mfd: max77620: Fix refcount leak in max77620_initialise_fps
	iommu/arm-smmu: qcom_iommu: Add of_node_put() when breaking out of loop
	s390/zcore: fix race when reading from hardware system area
	ASoC: qcom: q6dsp: Fix an off-by-one in q6adm_alloc_copp()
	fuse: Remove the control interface for virtio-fs
	ASoC: audio-graph-card: Add of_node_put() in fail path
	watchdog: armada_37xx_wdt: check the return value of devm_ioremap() in armada_37xx_wdt_probe()
	video: fbdev: amba-clcd: Fix refcount leak bugs
	video: fbdev: sis: fix typos in SiS_GetModeID()
	powerpc/32: Do not allow selection of e5500 or e6500 CPUs on PPC32
	powerpc/pci: Prefer PCI domain assignment via DT 'linux,pci-domain' and alias
	powerpc/spufs: Fix refcount leak in spufs_init_isolated_loader
	powerpc/xive: Fix refcount leak in xive_get_max_prio
	powerpc/cell/axon_msi: Fix refcount leak in setup_msi_msg_address
	perf symbol: Fail to read phdr workaround
	kprobes: Forbid probing on trampoline and BPF code areas
	powerpc/pci: Fix PHB numbering when using opal-phbid
	genelf: Use HAVE_LIBCRYPTO_SUPPORT, not the never defined HAVE_LIBCRYPTO
	scripts/faddr2line: Fix vmlinux detection on arm64
	x86/numa: Use cpumask_available instead of hardcoded NULL check
	video: fbdev: arkfb: Fix a divide-by-zero bug in ark_set_pixclock()
	tools/thermal: Fix possible path truncations
	video: fbdev: vt8623fb: Check the size of screen before memset_io()
	video: fbdev: arkfb: Check the size of screen before memset_io()
	video: fbdev: s3fb: Check the size of screen before memset_io()
	scsi: zfcp: Fix missing auto port scan and thus missing target ports
	scsi: qla2xxx: Fix discovery issues in FC-AL topology
	scsi: qla2xxx: Turn off multi-queue for 8G adapters
	scsi: qla2xxx: Fix erroneous mailbox timeout after PCI error injection
	x86/olpc: fix 'logical not is only applied to the left hand side'
	spmi: trace: fix stack-out-of-bound access in SPMI tracing functions
	kexec, KEYS, s390: Make use of built-in and secondary keyring for signature verification
	tpm: eventlog: Fix section mismatch for DEBUG_SECTION_MISMATCH
	btrfs: reset block group chunk force if we have to wait
	ext4: add EXT4_INODE_HAS_XATTR_SPACE macro in xattr.h
	ext4: make sure ext4_append() always allocates new block
	ext4: fix use-after-free in ext4_xattr_set_entry
	ext4: update s_overhead_clusters in the superblock during an on-line resize
	ext4: fix extent status tree race in writeback error recovery path
	ext4: correct max_inline_xattr_value_size computing
	ext4: correct the misjudgment in ext4_iget_extra_inode
	intel_th: pci: Add Raptor Lake-S CPU support
	intel_th: pci: Add Raptor Lake-S PCH support
	intel_th: pci: Add Meteor Lake-P support
	dm raid: fix address sanitizer warning in raid_resume
	dm raid: fix address sanitizer warning in raid_status
	dm thin: fix use-after-free crash in dm_sm_register_threshold_callback
	dm writecache: set a default MAX_WRITEBACK_JOBS
	ACPI: CPPC: Do not prevent CPPC from working in the future
	timekeeping: contribute wall clock to rng on time change
	firmware: arm_scpi: Ensure scpi_info is not assigned if the probe fails
	iommu/vt-d: avoid invalid memory access via node_online(NUMA_NO_NODE)
	net_sched: cls_route: remove from list when handle is 0
	btrfs: reject log replay if there is unsupported RO compat flag
	KVM: Add infrastructure and macro to mark VM as bugged
	KVM: x86: Check lapic_in_kernel() before attempting to set a SynIC irq
	KVM: x86: Avoid theoretical NULL pointer dereference in kvm_irq_delivery_to_apic_fast()
	tcp: fix over estimation in sk_forced_mem_schedule()
	scsi: sg: Allow waiting for commands to complete on removed device
	Revert "net: usb: ax88179_178a needs FLAG_SEND_ZLP"
	Bluetooth: L2CAP: Fix l2cap_global_chan_by_psm regression
	net/9p: Initialize the iounit field during fid creation
	net_sched: cls_route: disallow handle of 0
	ALSA: info: Fix llseek return value when using callback
	rds: add missing barrier to release_refill
	ata: libata-eh: Add missing command name
	mmc: pxamci: Fix another error handling path in pxamci_probe()
	mmc: pxamci: Fix an error handling path in pxamci_probe()
	btrfs: fix lost error handling when looking up extended ref on log replay
	tracing: Have filter accept "common_cpu" to be consistent
	can: ems_usb: fix clang's -Wunaligned-access warning
	apparmor: fix quiet_denied for file rules
	apparmor: fix absroot causing audited secids to begin with =
	apparmor: Fix failed mount permission check error message
	apparmor: fix aa_label_asxprint return check
	apparmor: fix overlapping attachment computation
	apparmor: fix reference count leak in aa_pivotroot()
	apparmor: Fix memleak in aa_simple_write_to_buffer()
	Documentation: ACPI: EINJ: Fix obsolete example
	NFSv4.1: Don't decrease the value of seq_nr_highest_sent
	NFSv4.1: Handle NFS4ERR_DELAY replies to OP_SEQUENCE correctly
	NFSv4: Fix races in the legacy idmapper upcall
	NFSv4.1: RECLAIM_COMPLETE must handle EACCES
	NFSv4/pnfs: Fix a use-after-free bug in open
	can: mcp251x: Fix race condition on receive interrupt
	sunrpc: fix expiry of auth creds
	SUNRPC: Reinitialise the backchannel request buffers before reuse
	devlink: Fix use-after-free after a failed reload
	net: bgmac: Fix a BUG triggered by wrong bytes_compl
	pinctrl: nomadik: Fix refcount leak in nmk_pinctrl_dt_subnode_to_map
	pinctrl: qcom: msm8916: Allow CAMSS GP clocks to be muxed
	pinctrl: sunxi: Add I/O bias setting for H6 R-PIO
	ACPI: property: Return type of acpi_add_nondev_subnodes() should be bool
	geneve: do not use RT_TOS for IPv6 flowlabel
	plip: avoid rcu debug splat
	vsock: Fix memory leak in vsock_connect()
	vsock: Set socket state back to SS_UNCONNECTED in vsock_connect_timeout()
	dt-bindings: arm: qcom: fix MSM8916 MTP compatibles
	tools/vm/slabinfo: use alphabetic order when two values are equal
	tools build: Switch to new openssl API for test-libcrypto
	NTB: ntb_tool: uninitialized heap data in tool_fn_write()
	nfp: ethtool: fix the display error of `ethtool -m DEVNAME`
	xen/xenbus: fix return type in xenbus_file_read()
	atm: idt77252: fix use-after-free bugs caused by tst_timer
	dpaa2-eth: trace the allocated address instead of page struct
	tee: add overflow check in register_shm_helper()
	nios2: page fault et.al. are *not* restartable syscalls...
	nios2: don't leave NULLs in sys_call_table[]
	nios2: traced syscall does need to check the syscall number
	nios2: fix syscall restart checks
	nios2: restarts apply only to the first sigframe we build...
	nios2: add force_successful_syscall_return()
	iavf: Fix adminq error handling
	clk: rockchip: add sclk_mac_lbtest to rk3188_critical_clocks
	netfilter: nf_tables: really skip inactive sets when allocating name
	powerpc/pci: Fix get_phb_number() locking
	net: dsa: mv88e6060: prevent crash on an unused port
	net: moxa: pass pdev instead of ndev to DMA functions
	net: dsa: microchip: ksz9477: fix fdb_dump last invalid entry
	ice: Ignore EEXIST when setting promisc mode
	i40e: Fix to stop tx_timeout recovery if GLOBR fails
	fec: Fix timer capture timing in `fec_ptp_enable_pps()`
	igb: Add lock to avoid data race
	gcc-plugins: Undefine LATENT_ENTROPY_PLUGIN when plugin disabled for a file
	locking/atomic: Make test_and_*_bit() ordered on failure
	drm/meson: Fix refcount bugs in meson_vpu_has_available_connectors()
	PCI: Add ACS quirk for Broadcom BCM5750x NICs
	usb: cdns3 fix use-after-free at workaround 2
	usb: gadget: uvc: call uvc uvcg_warn on completed status instead of uvcg_info
	irqchip/tegra: Fix overflow implicit truncation warnings
	drm/meson: Fix overflow implicit truncation warnings
	usb: host: ohci-ppc-of: Fix refcount leak bug
	usb: renesas: Fix refcount leak bug
	vboxguest: Do not use devm for irq
	clk: qcom: ipq8074: dont disable gcc_sleep_clk_src
	scsi: lpfc: Prevent buffer overflow crashes in debugfs with malformed user input
	gadgetfs: ep_io - wait until IRQ finishes
	cxl: Fix a memory leak in an error handling path
	PCI/ACPI: Guard ARM64-specific mcfg_quirks
	um: add "noreboot" command line option for PANIC_TIMEOUT=-1 setups
	selftests/kprobe: Do not test for GRP/ without event failures
	dmaengine: sprd: Cleanup in .remove() after pm_runtime_get_sync() failed
	nvmet-tcp: fix lockdep complaint on nvmet_tcp_wq flush during queue teardown
	drivers:md:fix a potential use-after-free bug
	ext4: avoid remove directory when directory is corrupted
	ext4: avoid resizing to a partial cluster size
	lib/list_debug.c: Detect uninitialized lists
	tty: serial: Fix refcount leak bug in ucc_uart.c
	vfio: Clear the caps->buf to NULL after free
	mips: cavium-octeon: Fix missing of_node_put() in octeon2_usb_clocks_start
	riscv: mmap with PROT_WRITE but no PROT_READ is invalid
	RISC-V: Add fast call path of crash_kexec()
	watchdog: export lockup_detector_reconfigure
	powerpc/32: Don't always pass -mcpu=powerpc to the compiler
	ALSA: core: Add async signal helpers
	ALSA: timer: Use deferred fasync helper
	f2fs: fix to avoid use f2fs_bug_on() in f2fs_new_node_page()
	smb3: check xattr value length earlier
	powerpc/64: Init jump labels before parse_early_param()
	video: fbdev: i740fb: Check the argument of i740_calc_vclk()
	MIPS: tlbex: Explicitly compare _PAGE_NO_EXEC against 0
	tracing/probes: Have kprobes and uprobes use $COMM too
	can: j1939: j1939_sk_queue_activate_next_locked(): replace WARN_ON_ONCE with netdev_warn_once()
	can: j1939: j1939_session_destroy(): fix memory leak of skbs
	btrfs: only write the sectors in the vertical stripe which has data stripes
	btrfs: raid56: don't trust any cached sector in __raid56_parity_recover()
	Linux 5.4.211

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I509fd58b7896bfeaa41497f558a2bfc079e46656
2022-08-25 12:12:16 +02:00
Greg Kroah-Hartman
684cc17be8 Linux 5.4.211
Link: https://lore.kernel.org/r/20220823080115.331990024@linuxfoundation.org
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25 11:18:40 +02:00
Qu Wenruo
473f43725b btrfs: raid56: don't trust any cached sector in __raid56_parity_recover()
commit f6065f8edeb25f4a9dfe0b446030ad995a84a088 upstream.

[BUG]
There is a small workload which will always fail with recent kernel:
(A simplified version from btrfs/125 test case)

  mkfs.btrfs -f -m raid5 -d raid5 -b 1G $dev1 $dev2 $dev3
  mount $dev1 $mnt
  xfs_io -f -c "pwrite -S 0xee 0 1M" $mnt/file1
  sync
  umount $mnt
  btrfs dev scan -u $dev3
  mount -o degraded $dev1 $mnt
  xfs_io -f -c "pwrite -S 0xff 0 128M" $mnt/file2
  umount $mnt
  btrfs dev scan
  mount $dev1 $mnt
  btrfs balance start --full-balance $mnt
  umount $mnt

The failure is always failed to read some tree blocks:

  BTRFS info (device dm-4): relocating block group 217710592 flags data|raid5
  BTRFS error (device dm-4): parent transid verify failed on 38993920 wanted 9 found 7
  BTRFS error (device dm-4): parent transid verify failed on 38993920 wanted 9 found 7
  ...

[CAUSE]
With the recently added debug output, we can see all RAID56 operations
related to full stripe 38928384:

  56.1183: raid56_read_partial: full_stripe=38928384 devid=2 type=DATA1 offset=0 opf=0x0 physical=9502720 len=65536
  56.1185: raid56_read_partial: full_stripe=38928384 devid=3 type=DATA2 offset=16384 opf=0x0 physical=9519104 len=16384
  56.1185: raid56_read_partial: full_stripe=38928384 devid=3 type=DATA2 offset=49152 opf=0x0 physical=9551872 len=16384
  56.1187: raid56_write_stripe: full_stripe=38928384 devid=3 type=DATA2 offset=0 opf=0x1 physical=9502720 len=16384
  56.1188: raid56_write_stripe: full_stripe=38928384 devid=3 type=DATA2 offset=32768 opf=0x1 physical=9535488 len=16384
  56.1188: raid56_write_stripe: full_stripe=38928384 devid=1 type=PQ1 offset=0 opf=0x1 physical=30474240 len=16384
  56.1189: raid56_write_stripe: full_stripe=38928384 devid=1 type=PQ1 offset=32768 opf=0x1 physical=30507008 len=16384
  56.1218: raid56_write_stripe: full_stripe=38928384 devid=3 type=DATA2 offset=49152 opf=0x1 physical=9551872 len=16384
  56.1219: raid56_write_stripe: full_stripe=38928384 devid=1 type=PQ1 offset=49152 opf=0x1 physical=30523392 len=16384
  56.2721: raid56_parity_recover: full stripe=38928384 eb=39010304 mirror=2
  56.2723: raid56_parity_recover: full stripe=38928384 eb=39010304 mirror=2
  56.2724: raid56_parity_recover: full stripe=38928384 eb=39010304 mirror=2

Before we enter raid56_parity_recover(), we have triggered some metadata
write for the full stripe 38928384, this leads to us to read all the
sectors from disk.

Furthermore, btrfs raid56 write will cache its calculated P/Q sectors to
avoid unnecessary read.

This means, for that full stripe, after any partial write, we will have
stale data, along with P/Q calculated using that stale data.

Thankfully due to patch "btrfs: only write the sectors in the vertical stripe
which has data stripes" we haven't submitted all the corrupted P/Q to disk.

When we really need to recover certain range, aka in
raid56_parity_recover(), we will use the cached rbio, along with its
cached sectors (the full stripe is all cached).

This explains why we have no event raid56_scrub_read_recover()
triggered.

Since we have the cached P/Q which is calculated using the stale data,
the recovered one will just be stale.

In our particular test case, it will always return the same incorrect
metadata, thus causing the same error message "parent transid verify
failed on 39010304 wanted 9 found 7" again and again.

[BTRFS DESTRUCTIVE RMW PROBLEM]

Test case btrfs/125 (and above workload) always has its trouble with
the destructive read-modify-write (RMW) cycle:

        0       32K     64K
Data1:  | Good  | Good  |
Data2:  | Bad   | Bad   |
Parity: | Good  | Good  |

In above case, if we trigger any write into Data1, we will use the bad
data in Data2 to re-generate parity, killing the only chance to recovery
Data2, thus Data2 is lost forever.

This destructive RMW cycle is not specific to btrfs RAID56, but there
are some btrfs specific behaviors making the case even worse:

- Btrfs will cache sectors for unrelated vertical stripes.

  In above example, if we're only writing into 0~32K range, btrfs will
  still read data range (32K ~ 64K) of Data1, and (64K~128K) of Data2.
  This behavior is to cache sectors for later update.

  Incidentally commit d4e28d9b5f04 ("btrfs: raid56: make steal_rbio()
  subpage compatible") has a bug which makes RAID56 to never trust the
  cached sectors, thus slightly improve the situation for recovery.

  Unfortunately, follow up fix "btrfs: update stripe_sectors::uptodate in
  steal_rbio" will revert the behavior back to the old one.

- Btrfs raid56 partial write will update all P/Q sectors and cache them

  This means, even if data at (64K ~ 96K) of Data2 is free space, and
  only (96K ~ 128K) of Data2 is really stale data.
  And we write into that (96K ~ 128K), we will update all the parity
  sectors for the full stripe.

  This unnecessary behavior will completely kill the chance of recovery.

  Thankfully, an unrelated optimization "btrfs: only write the sectors
  in the vertical stripe which has data stripes" will prevent
  submitting the write bio for untouched vertical sectors.

  That optimization will keep the on-disk P/Q untouched for a chance for
  later recovery.

[FIX]
Although we have no good way to completely fix the destructive RMW
(unless we go full scrub for each partial write), we can still limit the
damage.

With patch "btrfs: only write the sectors in the vertical stripe which
has data stripes" now we won't really submit the P/Q of unrelated
vertical stripes, so the on-disk P/Q should still be fine.

Now we really need to do is just drop all the cached sectors when doing
recovery.

By this, we have a chance to read the original P/Q from disk, and have a
chance to recover the stale data, while still keep the cache to speed up
regular write path.

In fact, just dropping all the cache for recovery path is good enough to
allow the test case btrfs/125 along with the small script to pass
reliably.

The lack of metadata write after the degraded mount, and forced metadata
COW is saving us this time.

So this patch will fix the behavior by not trust any cache in
__raid56_parity_recover(), to solve the problem while still keep the
cache useful.

But please note that this test pass DOES NOT mean we have solved the
destructive RMW problem, we just do better damage control a little
better.

Related patches:

- btrfs: only write the sectors in the vertical stripe
- d4e28d9b5f04 ("btrfs: raid56: make steal_rbio() subpage compatible")
- btrfs: update stripe_sectors::uptodate in steal_rbio

Acked-by: David Sterba <dsterba@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25 11:18:40 +02:00
Qu Wenruo
6fd4cea044 btrfs: only write the sectors in the vertical stripe which has data stripes
commit bd8f7e627703ca5707833d623efcd43f104c7b3f upstream.

If we have only 8K partial write at the beginning of a full RAID56
stripe, we will write the following contents:

                    0  8K           32K             64K
Disk 1	(data):     |XX|            |               |
Disk 2  (data):     |               |               |
Disk 3  (parity):   |XXXXXXXXXXXXXXX|XXXXXXXXXXXXXXX|

|X| means the sector will be written back to disk.

Note that, although we won't write any sectors from disk 2, but we will
write the full 64KiB of parity to disk.

This behavior is fine for now, but not for the future (especially for
RAID56J, as we waste quite some space to journal the unused parity
stripes).

So here we will also utilize the btrfs_raid_bio::dbitmap, anytime we
queue a higher level bio into an rbio, we will update rbio::dbitmap to
indicate which vertical stripes we need to writeback.

And at finish_rmw(), we also check dbitmap to see if we need to write
any sector in the vertical stripe.

So after the patch, above example will only lead to the following
writeback pattern:

                    0  8K           32K             64K
Disk 1	(data):     |XX|            |               |
Disk 2  (data):     |               |               |
Disk 3  (parity):   |XX|            |               |

Acked-by: David Sterba <dsterba@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25 11:18:40 +02:00
Fedor Pchelkin
04e41b6bac can: j1939: j1939_session_destroy(): fix memory leak of skbs
commit 8c21c54a53ab21842f5050fa090f26b03c0313d6 upstream.

We need to drop skb references taken in j1939_session_skb_queue() when
destroying a session in j1939_session_destroy(). Otherwise those skbs
would be lost.

Link to Syzkaller info and repro: https://forge.ispras.ru/issues/11743.

Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

V1: https://lore.kernel.org/all/20220708175949.539064-1-pchelkin@ispras.ru

Fixes: 9d71dd0c70 ("can: add support of SAE J1939 protocol")
Suggested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/all/20220805150216.66313-1-pchelkin@ispras.ru
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25 11:18:39 +02:00
Fedor Pchelkin
18e0ab31b0 can: j1939: j1939_sk_queue_activate_next_locked(): replace WARN_ON_ONCE with netdev_warn_once()
commit 8ef49f7f8244424adcf4a546dba4cbbeb0b09c09 upstream.

We should warn user-space that it is doing something wrong when trying
to activate sessions with identical parameters but WARN_ON_ONCE macro
can not be used here as it serves a different purpose.

So it would be good to replace it with netdev_warn_once() message.

Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

Fixes: 9d71dd0c70 ("can: add support of SAE J1939 protocol")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/all/20220729143655.1108297-1-pchelkin@ispras.ru
[mkl: fix indention]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25 11:18:39 +02:00
Steven Rostedt (Google)
5c9637279f tracing/probes: Have kprobes and uprobes use $COMM too
commit ab8384442ee512fc0fc72deeb036110843d0e7ff upstream.

Both $comm and $COMM can be used to get current->comm in eprobes and the
filtering and histogram logic. Make kprobes and uprobes consistent in this
regard and allow both $comm and $COMM as well. Currently kprobes and
uprobes only handle $comm, which is inconsistent with the other utilities,
and can be confusing to users.

Link: https://lkml.kernel.org/r/20220820134401.317014913@goodmis.org
Link: https://lore.kernel.org/all/20220820220442.776e1ddaf8836e82edb34d01@kernel.org/

Cc: stable@vger.kernel.org
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tzvetomir Stoyanov <tz.stoyanov@gmail.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Fixes: 533059281e ("tracing: probeevent: Introduce new argument fetching code")
Suggested-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25 11:18:39 +02:00
Nathan Chancellor
5d8244d42d MIPS: tlbex: Explicitly compare _PAGE_NO_EXEC against 0
[ Upstream commit 74de14fe05dd6b151d73cb0c73c8ec874cbdcde6 ]

When CONFIG_XPA is enabled, Clang warns:

  arch/mips/mm/tlbex.c:629:24: error: converting the result of '<<' to a boolean; did you mean '(1 << _PAGE_NO_EXEC_SHIFT) != 0'? [-Werror,-Wint-in-bool-context]
          if (cpu_has_rixi && !!_PAGE_NO_EXEC) {
                              ^
  arch/mips/include/asm/pgtable-bits.h:174:28: note: expanded from macro '_PAGE_NO_EXEC'
  # define _PAGE_NO_EXEC          (1 << _PAGE_NO_EXEC_SHIFT)
                                     ^
  arch/mips/mm/tlbex.c:2568:24: error: converting the result of '<<' to a boolean; did you mean '(1 << _PAGE_NO_EXEC_SHIFT) != 0'? [-Werror,-Wint-in-bool-context]
          if (!cpu_has_rixi || !_PAGE_NO_EXEC) {
                                ^
  arch/mips/include/asm/pgtable-bits.h:174:28: note: expanded from macro '_PAGE_NO_EXEC'
  # define _PAGE_NO_EXEC          (1 << _PAGE_NO_EXEC_SHIFT)
                                     ^
  2 errors generated.

_PAGE_NO_EXEC can be '0' or '1 << _PAGE_NO_EXEC_SHIFT' depending on the
build and runtime configuration, which is what the negation operators
are trying to convey. To silence the warning, explicitly compare against
0 so the result of the '<<' operator is not implicitly converted to a
boolean.

According to its documentation, GCC enables -Wint-in-bool-context with
-Wall but this warning is not visible when building the same
configuration with GCC. It appears GCC only warns when compiling C++,
not C, although the documentation makes no note of this:
https://godbolt.org/z/x39q3brxf

Reported-by: Sudip Mukherjee (Codethink) <sudipm.mukherjee@gmail.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25 11:18:39 +02:00
Zheyu Ma
2b7f559152 video: fbdev: i740fb: Check the argument of i740_calc_vclk()
[ Upstream commit 40bf722f8064f50200b8c4f8946cd625b441dda9 ]

Since the user can control the arguments of the ioctl() from the user
space, under special arguments that may result in a divide-by-zero bug.

If the user provides an improper 'pixclock' value that makes the argumet
of i740_calc_vclk() less than 'I740_RFREQ_FIX', it will cause a
divide-by-zero bug in:
    drivers/video/fbdev/i740fb.c:353 p_best = min(15, ilog2(I740_MAX_VCO_FREQ / (freq / I740_RFREQ_FIX)));

The following log can reveal it:

divide error: 0000 [#1] PREEMPT SMP KASAN PTI
RIP: 0010:i740_calc_vclk drivers/video/fbdev/i740fb.c:353 [inline]
RIP: 0010:i740fb_decode_var drivers/video/fbdev/i740fb.c:646 [inline]
RIP: 0010:i740fb_set_par+0x163f/0x3b70 drivers/video/fbdev/i740fb.c:742
Call Trace:
 fb_set_var+0x604/0xeb0 drivers/video/fbdev/core/fbmem.c:1034
 do_fb_ioctl+0x234/0x670 drivers/video/fbdev/core/fbmem.c:1110
 fb_ioctl+0xdd/0x130 drivers/video/fbdev/core/fbmem.c:1189

Fix this by checking the argument of i740_calc_vclk() first.

Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25 11:18:38 +02:00
Zhouyi Zhou
5e14b04c84 powerpc/64: Init jump labels before parse_early_param()
[ Upstream commit ca829e05d3d4f728810cc5e4b468d9ebc7745eb3 ]

On 64-bit, calling jump_label_init() in setup_feature_keys() is too
late because static keys may be used in subroutines of
parse_early_param() which is again subroutine of early_init_devtree().

For example booting with "threadirqs":

  static_key_enable_cpuslocked(): static key '0xc000000002953260' used before call to jump_label_init()
  WARNING: CPU: 0 PID: 0 at kernel/jump_label.c:166 static_key_enable_cpuslocked+0xfc/0x120
  ...
  NIP static_key_enable_cpuslocked+0xfc/0x120
  LR  static_key_enable_cpuslocked+0xf8/0x120
  Call Trace:
    static_key_enable_cpuslocked+0xf8/0x120 (unreliable)
    static_key_enable+0x30/0x50
    setup_forced_irqthreads+0x28/0x40
    do_early_param+0xa0/0x108
    parse_args+0x290/0x4e0
    parse_early_options+0x48/0x5c
    parse_early_param+0x58/0x84
    early_init_devtree+0xd4/0x518
    early_setup+0xb4/0x214

So call jump_label_init() just before parse_early_param() in
early_init_devtree().

Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Zhouyi Zhou <zhouzhouyi@gmail.com>
[mpe: Add call trace to change log and minor wording edits.]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220726015747.11754-1-zhouzhouyi@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25 11:18:38 +02:00
Steve French
720f6112c3 smb3: check xattr value length earlier
[ Upstream commit 5fa2cffba0b82336a2244d941322eb1627ff787b ]

Coverity complains about assigning a pointer based on
value length before checking that value length goes
beyond the end of the SMB.  Although this is even more
unlikely as value length is a single byte, and the
pointer is not dereferenced until laterm, it is clearer
to check the lengths first.

Addresses-Coverity: 1467704 ("Speculative execution data leak")
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25 11:18:38 +02:00
Chao Yu
29e734ec33 f2fs: fix to avoid use f2fs_bug_on() in f2fs_new_node_page()
[ Upstream commit 141170b759e03958f296033bb7001be62d1d363b ]

As Dipanjan Das <mail.dipanjan.das@gmail.com> reported, syzkaller
found a f2fs bug as below:

RIP: 0010:f2fs_new_node_page+0x19ac/0x1fc0 fs/f2fs/node.c:1295
Call Trace:
 write_all_xattrs fs/f2fs/xattr.c:487 [inline]
 __f2fs_setxattr+0xe76/0x2e10 fs/f2fs/xattr.c:743
 f2fs_setxattr+0x233/0xab0 fs/f2fs/xattr.c:790
 f2fs_xattr_generic_set+0x133/0x170 fs/f2fs/xattr.c:86
 __vfs_setxattr+0x115/0x180 fs/xattr.c:182
 __vfs_setxattr_noperm+0x125/0x5f0 fs/xattr.c:216
 __vfs_setxattr_locked+0x1cf/0x260 fs/xattr.c:277
 vfs_setxattr+0x13f/0x330 fs/xattr.c:303
 setxattr+0x146/0x160 fs/xattr.c:611
 path_setxattr+0x1a7/0x1d0 fs/xattr.c:630
 __do_sys_lsetxattr fs/xattr.c:653 [inline]
 __se_sys_lsetxattr fs/xattr.c:649 [inline]
 __x64_sys_lsetxattr+0xbd/0x150 fs/xattr.c:649
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x46/0xb0

NAT entry and nat bitmap can be inconsistent, e.g. one nid is free
in nat bitmap, and blkaddr in its NAT entry is not NULL_ADDR, it
may trigger BUG_ON() in f2fs_new_node_page(), fix it.

Reported-by: Dipanjan Das <mail.dipanjan.das@gmail.com>
Signed-off-by: Chao Yu <chao.yu@oppo.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25 11:18:38 +02:00
Takashi Iwai
dd9d894b41 ALSA: timer: Use deferred fasync helper
[ Upstream commit 95cc637c1afd83fb7dd3d7c8a53710488f4caf9c ]

For avoiding the potential deadlock via kill_fasync() call, use the
new fasync helpers to defer the invocation from PCI API.  Note that
it's merely a workaround.

Reported-by: syzbot+1ee0910eca9c94f71f25@syzkaller.appspotmail.com
Reported-by: syzbot+49b10793b867871ee26f@syzkaller.appspotmail.com
Reported-by: syzbot+8285e973a41b5aa68902@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20220728125945.29533-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25 11:18:38 +02:00
Takashi Iwai
76f87b11a4 ALSA: core: Add async signal helpers
[ Upstream commit ef34a0ae7a2654bc9e58675e36898217fb2799d8 ]

Currently the call of kill_fasync() from an interrupt handler might
lead to potential spin deadlocks, as spotted by syzkaller.
Unfortunately, it's not so trivial to fix this lock chain as it's
involved with the tasklist_lock that is touched in allover places.

As a temporary workaround, this patch provides the way to defer the
async signal notification in a work.  The new helper functions,
snd_fasync_helper() and snd_kill_faync() are replacements for
fasync_helper() and kill_fasync(), respectively.  In addition,
snd_fasync_free() needs to be called at the destructor of the relevant
file object.

Link: https://lore.kernel.org/r/20220728125945.29533-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25 11:18:37 +02:00
Christophe Leroy
f4159834d1 powerpc/32: Don't always pass -mcpu=powerpc to the compiler
[ Upstream commit 446cda1b21d9a6b3697fe399c6a3a00ff4a285f5 ]

Since commit 4bf4f42a2f ("powerpc/kbuild: Set default generic
machine type for 32-bit compile"), when building a 32 bits kernel
with a bi-arch version of GCC, or when building a book3s/32 kernel,
the option -mcpu=powerpc is passed to GCC at all time, relying on it
being eventually overriden by a subsequent -mcpu=xxxx.

But when building the same kernel with a 32 bits only version of GCC,
that is not done, relying on gcc being built with the expected default
CPU.

This logic has two problems. First, it is a bit fragile to rely on
whether the GCC version is bi-arch or not, because today we can have
bi-arch versions of GCC configured with a 32 bits default. Second,
there are some versions of GCC which don't support -mcpu=powerpc,
for instance for e500 SPE-only versions.

So, stop relying on this approximative logic and allow the user to
decide whether he/she wants to use the toolchain's default CPU or if
he/she wants to set one, and allow only possible CPUs based on the
selected target.

Reported-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/d4df724691351531bf46d685d654689e5dfa0d74.1657549153.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25 11:18:37 +02:00
Laurent Dufour
d78d0ee79b watchdog: export lockup_detector_reconfigure
[ Upstream commit 7c56a8733d0a2a4be2438a7512566e5ce552fccf ]

In some circumstances it may be interesting to reconfigure the watchdog
from inside the kernel.

On PowerPC, this may helpful before and after a LPAR migration (LPM) is
initiated, because it implies some latencies, watchdog, and especially NMI
watchdog is expected to be triggered during this operation. Reconfiguring
the watchdog with a factor, would prevent it to happen too frequently
during LPM.

Rename lockup_detector_reconfigure() as __lockup_detector_reconfigure() and
create a new function lockup_detector_reconfigure() calling
__lockup_detector_reconfigure() under the protection of watchdog_mutex.

Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
[mpe: Squash in build fix from Laurent, reported by Sachin]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220713154729.80789-3-ldufour@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25 11:18:37 +02:00
Xianting Tian
814d83c5e1 RISC-V: Add fast call path of crash_kexec()
[ Upstream commit 3f1901110a89b0e2e13adb2ac8d1a7102879ea98 ]

Currently, almost all archs (x86, arm64, mips...) support fast call
of crash_kexec() when "regs && kexec_should_crash()" is true. But
RISC-V not, it can only enter crash system via panic(). However panic()
doesn't pass the regs of the real accident scene to crash_kexec(),
it caused we can't get accurate backtrace via gdb,
	$ riscv64-linux-gnu-gdb vmlinux vmcore
	Reading symbols from vmlinux...
	[New LWP 95]
	#0  console_unlock () at kernel/printk/printk.c:2557
	2557                    if (do_cond_resched)
	(gdb) bt
	#0  console_unlock () at kernel/printk/printk.c:2557
	#1  0x0000000000000000 in ?? ()

With the patch we can get the accurate backtrace,
	$ riscv64-linux-gnu-gdb vmlinux vmcore
	Reading symbols from vmlinux...
	[New LWP 95]
	#0  0xffffffe00063a4e0 in test_thread (data=<optimized out>) at drivers/test_crash.c:81
	81             *(int *)p = 0xdead;
	(gdb)
	(gdb) bt
	#0  0xffffffe00064d5c0 in test_thread (data=<optimized out>) at drivers/test_crash.c:81
	#1  0x0000000000000000 in ?? ()

Test code to produce NULL address dereference in test_crash.c,
	void *p = NULL;
	*(int *)p = 0xdead;

Reviewed-by: Guo Ren <guoren@kernel.org>
Tested-by: Xianting Tian <xianting.tian@linux.alibaba.com>
Signed-off-by: Xianting Tian <xianting.tian@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220606082308.2883458-1-xianting.tian@linux.alibaba.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25 11:18:37 +02:00
Celeste Liu
812cb21259 riscv: mmap with PROT_WRITE but no PROT_READ is invalid
[ Upstream commit 2139619bcad7ac44cc8f6f749089120594056613 ]

As mentioned in Table 4.5 in RISC-V spec Volume 2 Section 4.3, write
but not read is "Reserved for future use.". For now, they are not valid.
In the current code, -wx is marked as invalid, but -w- is not marked
as invalid.
This patch refines that judgment.

Reported-by: xctan <xc-tan@outlook.com>
Co-developed-by: dram <dramforever@live.com>
Signed-off-by: dram <dramforever@live.com>
Co-developed-by: Ruizhe Pan <c141028@gmail.com>
Signed-off-by: Ruizhe Pan <c141028@gmail.com>
Signed-off-by: Celeste Liu <coelacanthus@outlook.com>
Link: https://lore.kernel.org/r/PH7PR14MB559464DBDD310E755F5B21E8CEDC9@PH7PR14MB5594.namprd14.prod.outlook.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25 11:18:36 +02:00
Liang He
1b49707df6 mips: cavium-octeon: Fix missing of_node_put() in octeon2_usb_clocks_start
[ Upstream commit 7a9f743ceead60ed454c46fbc3085ee9a79cbebb ]

We should call of_node_put() for the reference 'uctl_node' returned by
of_get_parent() which will increase the refcount. Otherwise, there will
be a refcount leak bug.

Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25 11:18:36 +02:00
Schspa Shi
3e6994735c vfio: Clear the caps->buf to NULL after free
[ Upstream commit 6641085e8d7b3f061911517f79a2a15a0a21b97b ]

On buffer resize failure, vfio_info_cap_add() will free the buffer,
report zero for the size, and return -ENOMEM.  As additional
hardening, also clear the buffer pointer to prevent any chance of a
double free.

Signed-off-by: Schspa Shi <schspa@gmail.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Link: https://lore.kernel.org/r/20220629022948.55608-1-schspa@gmail.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25 11:18:36 +02:00
Liang He
ca3fc1c38e tty: serial: Fix refcount leak bug in ucc_uart.c
[ Upstream commit d24d7bb2cd947676f9b71fb944d045e09b8b282f ]

In soc_info(), of_find_node_by_type() will return a node pointer
with refcount incremented. We should use of_node_put() when it is
not used anymore.

Acked-by: Timur Tabi <timur@kernel.org>
Signed-off-by: Liang He <windhl@126.com>
Link: https://lore.kernel.org/r/20220618060850.4058525-1-windhl@126.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25 11:18:36 +02:00
Guenter Roeck
3c0efcd608 lib/list_debug.c: Detect uninitialized lists
[ Upstream commit 0cc011c576aaa4de505046f7a6c90933d7c749a9 ]

In some circumstances, attempts are made to add entries to or to remove
entries from an uninitialized list.  A prime example is
amdgpu_bo_vm_destroy(): It is indirectly called from
ttm_bo_init_reserved() if that function fails, and tries to remove an
entry from a list.  However, that list is only initialized in
amdgpu_bo_create_vm() after the call to ttm_bo_init_reserved() returned
success.  This results in crashes such as

 BUG: kernel NULL pointer dereference, address: 0000000000000000
 #PF: supervisor read access in kernel mode
 #PF: error_code(0x0000) - not-present page
 PGD 0 P4D 0
 Oops: 0000 [#1] PREEMPT SMP NOPTI
 CPU: 1 PID: 1479 Comm: chrome Not tainted 5.10.110-15768-g29a72e65dae5
 Hardware name: Google Grunt/Grunt, BIOS Google_Grunt.11031.149.0 07/15/2020
 RIP: 0010:__list_del_entry_valid+0x26/0x7d
 ...
 Call Trace:
  amdgpu_bo_vm_destroy+0x48/0x8b
  ttm_bo_init_reserved+0x1d7/0x1e0
  amdgpu_bo_create+0x212/0x476
  ? amdgpu_bo_user_destroy+0x23/0x23
  ? kmem_cache_alloc+0x60/0x271
  amdgpu_bo_create_vm+0x40/0x7d
  amdgpu_vm_pt_create+0xe8/0x24b
 ...

Check if the list's prev and next pointers are NULL to catch such problems.

Link: https://lkml.kernel.org/r/20220531222951.92073-1-linux@roeck-us.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25 11:18:36 +02:00
Kiselev, Oleg
a6805b3dcf ext4: avoid resizing to a partial cluster size
[ Upstream commit 69cb8e9d8cd97cdf5e293b26d70a9dee3e35e6bd ]

This patch avoids an attempt to resize the filesystem to an
unaligned cluster boundary.  An online resize to a size that is not
integral to cluster size results in the last iteration attempting to
grow the fs by a negative amount, which trips a BUG_ON and leaves the fs
with a corrupted in-memory superblock.

Signed-off-by: Oleg Kiselev <okiselev@amazon.com>
Link: https://lore.kernel.org/r/0E92A0AB-4F16-4F1A-94B7-702CC6504FDE@amazon.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25 11:18:35 +02:00
Ye Bin
5bebfd6077 ext4: avoid remove directory when directory is corrupted
[ Upstream commit b24e77ef1c6d4dbf42749ad4903c97539cc9755a ]

Now if check directoy entry is corrupted, ext4_empty_dir may return true
then directory will be removed when file system mounted with "errors=continue".
In order not to make things worse just return false when directory is corrupted.

Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220622090223.682234-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25 11:18:35 +02:00
Wentao_Liang
f5d46f1b47 drivers:md:fix a potential use-after-free bug
[ Upstream commit 104212471b1c1817b311771d817fb692af983173 ]

In line 2884, "raid5_release_stripe(sh);" drops the reference to sh and
may cause sh to be released. However, sh is subsequently used in lines
2886 "if (sh->batch_head && sh != sh->batch_head)". This may result in an
use-after-free bug.

It can be fixed by moving "raid5_release_stripe(sh);" to the bottom of
the function.

Signed-off-by: Wentao_Liang <Wentao_Liang_g@163.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25 11:18:35 +02:00
Sagi Grimberg
7a2fe15946 nvmet-tcp: fix lockdep complaint on nvmet_tcp_wq flush during queue teardown
[ Upstream commit 533d2e8b4d5e4c89772a0adce913525fb86cbbee ]

We probably need nvmet_tcp_wq to have MEM_RECLAIM as we are
sending/receiving for the socket from works on this workqueue.
Also this eliminates lockdep complaints:
--
[ 6174.010200] workqueue: WQ_MEM_RECLAIM
nvmet-wq:nvmet_tcp_release_queue_work [nvmet_tcp] is flushing
!WQ_MEM_RECLAIM nvmet_tcp_wq:nvmet_tcp_io_work [nvmet_tcp]
[ 6174.010216] WARNING: CPU: 20 PID: 14456 at kernel/workqueue.c:2628
check_flush_dependency+0x110/0x14c

Reported-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25 11:18:35 +02:00
Uwe Kleine-König
0bf3dcfb03 dmaengine: sprd: Cleanup in .remove() after pm_runtime_get_sync() failed
[ Upstream commit 1e42f82cbec7b2cc4873751e7791e6611901c5fc ]

It's not allowed to quit remove early without cleaning up completely.
Otherwise this results in resource leaks that probably yield graver
problems later. Here for example some tasklets might survive the lifetime
of the sprd-dma device and access sdev which is freed after .remove()
returns.

As none of the device freeing requires an active device, just ignore the
return value of pm_runtime_get_sync().

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Baolin Wang <baolin.wang7@gmail.com>
Link: https://lore.kernel.org/r/20220721204054.323602-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25 11:18:35 +02:00
Steven Rostedt (Google)
d13b990d4f selftests/kprobe: Do not test for GRP/ without event failures
[ Upstream commit f5eab65ff2b76449286d18efc7fee3e0b72f7d9b ]

A new feature is added where kprobes (and other probes) do not need to
explicitly state the event name when creating a probe. The event name will
come from what is being attached.

That is:

  # echo 'p:foo/ vfs_read' > kprobe_events

Will no longer error, but instead create an event:

  # cat kprobe_events
 p:foo/p_vfs_read_0 vfs_read

This should not be tested as an error case anymore. Remove it from the
selftest as now this feature "breaks" the selftest as it no longer fails
as expected.

Link: https://lore.kernel.org/all/1656296348-16111-1-git-send-email-quic_linyyuan@quicinc.com/
Link: https://lkml.kernel.org/r/20220712161707.6dc08a14@gandalf.local.home

Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25 11:18:34 +02:00
Jason A. Donenfeld
082da6a9c3 um: add "noreboot" command line option for PANIC_TIMEOUT=-1 setups
[ Upstream commit dda520d07b95072a0b63f6c52a8eb566d08ea897 ]

QEMU has a -no-reboot option, which halts instead of reboots when the
guest asks to reboot. This is invaluable when used with
CONFIG_PANIC_TIMEOUT=-1 (and panic_on_warn), because it allows panics
and warnings to be caught immediately in CI. Implement this in UML too,
by way of a basic setup param.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25 11:18:34 +02:00
Huacai Chen
c3ce788be3 PCI/ACPI: Guard ARM64-specific mcfg_quirks
[ Upstream commit 40a6cc141b4b9580de140bcb3e893445708acc5d ]

Guard ARM64-specific quirks with CONFIG_ARM64 to avoid build errors,
since mcfg_quirks will be shared by more than one architectures.

Link: https://lore.kernel.org/r/20220714124216.1489304-2-chenhuacai@loongson.cn
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25 11:18:34 +02:00
Christophe JAILLET
695af60af7 cxl: Fix a memory leak in an error handling path
[ Upstream commit 3a15b45b5454da862376b5d69a4967f5c6fa1368 ]

A bitmap_zalloc() must be balanced by a corresponding bitmap_free() in the
error handling path of afu_allocate_irqs().

Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/ce5869418f5838187946eb6b11a52715a93ece3d.1657566849.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25 11:18:34 +02:00
Jozef Martiniak
ca06b4cde5 gadgetfs: ep_io - wait until IRQ finishes
[ Upstream commit 04cb742d4d8f30dc2e83b46ac317eec09191c68e ]

after usb_ep_queue() if wait_for_completion_interruptible() is
interrupted we need to wait until IRQ gets finished.

Otherwise complete() from epio_complete() can corrupt stack.

Signed-off-by: Jozef Martiniak <jomajm@gmail.com>
Link: https://lore.kernel.org/r/20220708070645.6130-1-jomajm@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25 11:18:33 +02:00
James Smart
927907f1cb scsi: lpfc: Prevent buffer overflow crashes in debugfs with malformed user input
[ Upstream commit f8191d40aa612981ce897e66cda6a88db8df17bb ]

Malformed user input to debugfs results in buffer overflow crashes.  Adapt
input string lengths to fit within internal buffers, leaving space for NULL
terminators.

Link: https://lore.kernel.org/r/20220701211425.2708-3-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25 11:18:33 +02:00
Robert Marko
d401611a93 clk: qcom: ipq8074: dont disable gcc_sleep_clk_src
[ Upstream commit 1bf7305e79aab095196131bdc87a97796e0e3fac ]

Once the usb sleep clocks are disabled, clock framework is trying to
disable the sleep clock source also.

However, it seems that it cannot be disabled and trying to do so produces:
[  245.436390] ------------[ cut here ]------------
[  245.441233] gcc_sleep_clk_src status stuck at 'on'
[  245.441254] WARNING: CPU: 2 PID: 223 at clk_branch_wait+0x130/0x140
[  245.450435] Modules linked in: xhci_plat_hcd xhci_hcd dwc3 dwc3_qcom leds_gpio
[  245.456601] CPU: 2 PID: 223 Comm: sh Not tainted 5.18.0-rc4 #215
[  245.463889] Hardware name: Xiaomi AX9000 (DT)
[  245.470050] pstate: 204000c5 (nzCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[  245.474307] pc : clk_branch_wait+0x130/0x140
[  245.481073] lr : clk_branch_wait+0x130/0x140
[  245.485588] sp : ffffffc009f2bad0
[  245.489838] x29: ffffffc009f2bad0 x28: ffffff8003e6c800 x27: 0000000000000000
[  245.493057] x26: 0000000000000000 x25: 0000000000000000 x24: ffffff800226ef20
[  245.500175] x23: ffffffc0089ff550 x22: 0000000000000000 x21: ffffffc008476ad0
[  245.507294] x20: 0000000000000000 x19: ffffffc00965ac70 x18: fffffffffffc51a7
[  245.514413] x17: 68702e3030303837 x16: 3a6d726f6674616c x15: ffffffc089f2b777
[  245.521531] x14: ffffffc0095c9d18 x13: 0000000000000129 x12: 0000000000000129
[  245.528649] x11: 00000000ffffffea x10: ffffffc009621d18 x9 : 0000000000000001
[  245.535767] x8 : 0000000000000001 x7 : 0000000000017fe8 x6 : 0000000000000001
[  245.542885] x5 : ffffff803fdca6d8 x4 : 0000000000000000 x3 : 0000000000000027
[  245.550002] x2 : 0000000000000027 x1 : 0000000000000023 x0 : 0000000000000026
[  245.557122] Call trace:
[  245.564229]  clk_branch_wait+0x130/0x140
[  245.566490]  clk_branch2_disable+0x2c/0x40
[  245.570656]  clk_core_disable+0x60/0xb0
[  245.574561]  clk_core_disable+0x68/0xb0
[  245.578293]  clk_disable+0x30/0x50
[  245.582113]  dwc3_qcom_remove+0x60/0xc0 [dwc3_qcom]
[  245.585588]  platform_remove+0x28/0x60
[  245.590361]  device_remove+0x4c/0x80
[  245.594179]  device_release_driver_internal+0x1dc/0x230
[  245.597914]  device_driver_detach+0x18/0x30
[  245.602861]  unbind_store+0xec/0x110
[  245.607027]  drv_attr_store+0x24/0x40
[  245.610847]  sysfs_kf_write+0x44/0x60
[  245.614405]  kernfs_fop_write_iter+0x128/0x1c0
[  245.618052]  new_sync_write+0xc0/0x130
[  245.622391]  vfs_write+0x1d4/0x2a0
[  245.626123]  ksys_write+0x58/0xe0
[  245.629508]  __arm64_sys_write+0x1c/0x30
[  245.632895]  invoke_syscall.constprop.0+0x5c/0x110
[  245.636890]  do_el0_svc+0xa0/0x150
[  245.641488]  el0_svc+0x18/0x60
[  245.644872]  el0t_64_sync_handler+0xa4/0x130
[  245.647914]  el0t_64_sync+0x174/0x178
[  245.652340] ---[ end trace 0000000000000000 ]---

So, add CLK_IS_CRITICAL flag to the clock so that the kernel won't try
to disable the sleep clock.

Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220515210048.483898-10-robimarko@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25 11:18:33 +02:00
Pascal Terjan
f78ac62e6b vboxguest: Do not use devm for irq
[ Upstream commit 6169525b76764acb81918aa387ac168fb9a55575 ]

When relying on devm it doesn't get freed early enough which causes the
following warning when unloading the module:

[249348.837181] remove_proc_entry: removing non-empty directory 'irq/20', leaking at least 'vboxguest'
[249348.837219] WARNING: CPU: 0 PID: 6708 at fs/proc/generic.c:715 remove_proc_entry+0x119/0x140

[249348.837379] Call Trace:
[249348.837385]  unregister_irq_proc+0xbd/0xe0
[249348.837392]  free_desc+0x23/0x60
[249348.837396]  irq_free_descs+0x4a/0x70
[249348.837401]  irq_domain_free_irqs+0x160/0x1a0
[249348.837452]  mp_unmap_irq+0x5c/0x60
[249348.837458]  acpi_unregister_gsi_ioapic+0x29/0x40
[249348.837463]  acpi_unregister_gsi+0x17/0x30
[249348.837467]  acpi_pci_irq_disable+0xbf/0xe0
[249348.837473]  pcibios_disable_device+0x20/0x30
[249348.837478]  pci_disable_device+0xef/0x120
[249348.837482]  vbg_pci_remove+0x6c/0x70 [vboxguest]

Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Pascal Terjan <pterjan@google.com>
Link: https://lore.kernel.org/r/20220612133744.4030602-1-pterjan@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25 11:18:33 +02:00
Liang He
cfa8f707a5 usb: renesas: Fix refcount leak bug
[ Upstream commit 9d6d5303c39b8bc182475b22f45504106a07f086 ]

In usbhs_rza1_hardware_init(), of_find_node_by_name() will return
a node pointer with refcount incremented. We should use of_node_put()
when it is not used anymore.

Signed-off-by: Liang He <windhl@126.com>
Link: https://lore.kernel.org/r/20220618023205.4056548-1-windhl@126.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25 11:18:33 +02:00
Liang He
0334d23c56 usb: host: ohci-ppc-of: Fix refcount leak bug
[ Upstream commit 40a959d7042bb7711e404ad2318b30e9f92c6b9b ]

In ohci_hcd_ppc_of_probe(), of_find_compatible_node() will return
a node pointer with refcount incremented. We should use of_node_put()
when it is not used anymore.

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Liang He <windhl@126.com>
Link: https://lore.kernel.org/r/20220617034637.4003115-1-windhl@126.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25 11:18:32 +02:00
Sai Prakash Ranjan
b743d6cef4 drm/meson: Fix overflow implicit truncation warnings
[ Upstream commit 98692f52c588225034cbff458622c2c06dfcb544 ]

Fix -Woverflow warnings for drm/meson driver which is a result
of moving arm64 custom MMIO accessor macros to asm-generic function
implementations giving a bonus type-checking now and uncovering these
overflow warnings.

drivers/gpu/drm/meson/meson_viu.c: In function ‘meson_viu_init’:
drivers/gpu/drm/meson/meson_registers.h:1826:48: error: large integer implicitly truncated to unsigned type [-Werror=overflow]
 #define  VIU_OSD_BLEND_REORDER(dest, src)      ((src) << (dest * 4))
                                                ^
drivers/gpu/drm/meson/meson_viu.c:472:18: note: in expansion of macro ‘VIU_OSD_BLEND_REORDER’
   writel_relaxed(VIU_OSD_BLEND_REORDER(0, 1) |
                  ^~~~~~~~~~~~~~~~~~~~~

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25 11:18:32 +02:00
Sai Prakash Ranjan
29b30e0413 irqchip/tegra: Fix overflow implicit truncation warnings
[ Upstream commit 443685992bda9bb4f8b17fc02c9f6c60e62b1461 ]

Fix -Woverflow warnings for tegra irqchip driver which is a result
of moving arm64 custom MMIO accessor macros to asm-generic function
implementations giving a bonus type-checking now and uncovering these
overflow warnings.

drivers/irqchip/irq-tegra.c: In function ‘tegra_ictlr_suspend’:
drivers/irqchip/irq-tegra.c:151:18: warning: large integer implicitly truncated to unsigned type [-Woverflow]
   writel_relaxed(~0ul, ictlr + ICTLR_COP_IER_CLR);
                  ^

Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25 11:18:32 +02:00
Michael Grzeschik
e2d5318065 usb: gadget: uvc: call uvc uvcg_warn on completed status instead of uvcg_info
[ Upstream commit a725d0f6dfc5d3739d6499f30ec865305ba3544d ]

Likewise to the uvcvideo hostside driver, this patch is changing the
usb_request message of an non zero completion handler call from dev_info
to dev_warn.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20220529223848.105914-4-m.grzeschik@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25 11:18:32 +02:00
Frank Li
e65d9b7147 usb: cdns3 fix use-after-free at workaround 2
[ Upstream commit 7d602f30149a117eea260208b1661bc404c21dfd ]

BUG: KFENCE: use-after-free read in __list_del_entry_valid+0x10/0xac

cdns3_wa2_remove_old_request()
{
	...
	kfree(priv_req->request.buf);
	cdns3_gadget_ep_free_request(&priv_ep->endpoint, &priv_req->request);
	list_del_init(&priv_req->list);
	^^^ use after free
	...
}

cdns3_gadget_ep_free_request() free the space pointed by priv_req,
but priv_req is used in the following list_del_init().

This patch move list_del_init() before cdns3_gadget_ep_free_request().

Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Faqiang Zhu <faqiang.zhu@nxp.com>
Link: https://lore.kernel.org/r/20220608190430.2814358-1-Frank.Li@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25 11:18:32 +02:00
Pavan Chebbi
e7170b5a28 PCI: Add ACS quirk for Broadcom BCM5750x NICs
[ Upstream commit afd306a65cedb9589564bdb23a0c368abc4215fd ]

The Broadcom BCM5750x NICs may be multi-function devices.  They do not
advertise ACS capability. Peer-to-peer transactions are not possible
between the individual functions, so it is safe to treat them as fully
isolated.

Add an ACS quirk for these devices so the functions can be in independent
IOMMU groups and attached individually to userspace applications using
VFIO.

Link: https://lore.kernel.org/r/1654796507-28610-1-git-send-email-michael.chan@broadcom.com
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25 11:18:31 +02:00
Liang He
d58ef25678 drm/meson: Fix refcount bugs in meson_vpu_has_available_connectors()
[ Upstream commit 91b3c8dbe898df158fd2a84675f3a284ff6666f7 ]

In this function, there are two refcount leak bugs:
(1) when breaking out of for_each_endpoint_of_node(), we need call
the of_node_put() for the 'ep';
(2) we should call of_node_put() for the reference returned by
of_graph_get_remote_port() when it is not used anymore.

Fixes: bbbe775ec5 ("drm: Add support for Amlogic Meson Graphic Controller")
Signed-off-by: Liang He <windhl@126.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220726010722.1319416-1-windhl@126.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-08-25 11:18:31 +02:00
Hector Martin
d0c4307aea locking/atomic: Make test_and_*_bit() ordered on failure
commit 415d832497098030241605c52ea83d4e2cfa7879 upstream.

These operations are documented as always ordered in
include/asm-generic/bitops/instrumented-atomic.h, and producer-consumer
type use cases where one side needs to ensure a flag is left pending
after some shared data was updated rely on this ordering, even in the
failure case.

This is the case with the workqueue code, which currently suffers from a
reproducible ordering violation on Apple M1 platforms (which are
notoriously out-of-order) that ends up causing the TTY layer to fail to
deliver data to userspace properly under the right conditions.  This
change fixes that bug.

Change the documentation to restrict the "no order on failure" story to
the _lock() variant (for which it makes sense), and remove the
early-exit from the generic implementation, which is what causes the
missing barrier semantics in that case.  Without this, the remaining
atomic op is fully ordered (including on ARM64 LSE, as of recent
versions of the architecture spec).

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: stable@vger.kernel.org
Fixes: e986a0d6cb ("locking/atomics, asm-generic/bitops/atomic.h: Rewrite using atomic_*() APIs")
Fixes: 61e02392d3 ("locking/atomic/bitops: Document and clarify ordering semantics for failed test_and_{}_bit()")
Signed-off-by: Hector Martin <marcan@marcan.st>
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25 11:18:31 +02:00
Andrew Donnellan
90fb514a16 gcc-plugins: Undefine LATENT_ENTROPY_PLUGIN when plugin disabled for a file
commit 012e8d2034f1bda8863435cd589636e618d6a659 upstream.

Commit 36d4b36b6959 ("lib/nodemask: inline next_node_in() and
node_random()") refactored some code by moving node_random() from
lib/nodemask.c to include/linux/nodemask.h, thus requiring nodemask.h to
include random.h, which conditionally defines add_latent_entropy()
depending on whether the macro LATENT_ENTROPY_PLUGIN is defined.

This broke the build on powerpc, where nodemask.h is indirectly included
in arch/powerpc/kernel/prom_init.c, part of the early boot machinery that
is excluded from the latent entropy plugin using
DISABLE_LATENT_ENTROPY_PLUGIN. It turns out that while we add a gcc flag
to disable the actual plugin, we don't undefine LATENT_ENTROPY_PLUGIN.

This leads to the following:

    CC      arch/powerpc/kernel/prom_init.o
  In file included from ./include/linux/nodemask.h:97,
                   from ./include/linux/mmzone.h:17,
                   from ./include/linux/gfp.h:7,
                   from ./include/linux/xarray.h:15,
                   from ./include/linux/radix-tree.h:21,
                   from ./include/linux/idr.h:15,
                   from ./include/linux/kernfs.h:12,
                   from ./include/linux/sysfs.h:16,
                   from ./include/linux/kobject.h:20,
                   from ./include/linux/pci.h:35,
                   from arch/powerpc/kernel/prom_init.c:24:
  ./include/linux/random.h: In function 'add_latent_entropy':
  ./include/linux/random.h:25:46: error: 'latent_entropy' undeclared (first use in this function); did you mean 'add_latent_entropy'?
     25 |         add_device_randomness((const void *)&latent_entropy, sizeof(latent_entropy));
        |                                              ^~~~~~~~~~~~~~
        |                                              add_latent_entropy
  ./include/linux/random.h:25:46: note: each undeclared identifier is reported only once for each function it appears in
  make[2]: *** [scripts/Makefile.build:249: arch/powerpc/kernel/prom_init.o] Fehler 1
  make[1]: *** [scripts/Makefile.build:465: arch/powerpc/kernel] Fehler 2
  make: *** [Makefile:1855: arch/powerpc] Error 2

Change the DISABLE_LATENT_ENTROPY_PLUGIN flags to undefine
LATENT_ENTROPY_PLUGIN for files where the plugin is disabled.

Cc: Yury Norov <yury.norov@gmail.com>
Fixes: 38addce8b6 ("gcc-plugins: Add latent_entropy plugin")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216367
Link: https://lore.kernel.org/linuxppc-dev/alpine.DEB.2.22.394.2208152006320.289321@ramsan.of.borg/
Reported-by: Erhard Furtner <erhard_f@mailbox.org>
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220816051720.44108-1-ajd@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25 11:18:31 +02:00
Lin Ma
55197ba6d6 igb: Add lock to avoid data race
commit 6faee3d4ee8be0f0367d0c3d826afb3571b7a5e0 upstream.

The commit c23d92b80e ("igb: Teardown SR-IOV before
unregister_netdev()") places the unregister_netdev() call after the
igb_disable_sriov() call to avoid functionality issue.

However, it introduces several race conditions when detaching a device.
For example, when .remove() is called, the below interleaving leads to
use-after-free.

 (FREE from device detaching)      |   (USE from netdev core)
igb_remove                         |  igb_ndo_get_vf_config
 igb_disable_sriov                 |  vf >= adapter->vfs_allocated_count?
  kfree(adapter->vf_data)          |
  adapter->vfs_allocated_count = 0 |
                                   |    memcpy(... adapter->vf_data[vf]

Moreover, the igb_disable_sriov() also suffers from data race with the
requests from VF driver.

 (FREE from device detaching)      |   (USE from requests)
igb_remove                         |  igb_msix_other
 igb_disable_sriov                 |   igb_msg_task
  kfree(adapter->vf_data)          |    vf < adapter->vfs_allocated_count
  adapter->vfs_allocated_count = 0 |

To this end, this commit first eliminates the data races from netdev
core by using rtnl_lock (similar to commit 719479230893 ("dpaa2-eth: add
MAC/PHY support through phylink")). And then adds a spinlock to
eliminate races from driver requests. (similar to commit 1e53834ce541
("ixgbe: Add locking to prevent panic when setting sriov_numvfs to zero")

Fixes: c23d92b80e ("igb: Teardown SR-IOV before unregister_netdev()")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20220817184921.735244-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25 11:18:30 +02:00
Csókás Bence
44b406aab0 fec: Fix timer capture timing in fec_ptp_enable_pps()
commit 61d5e2a251fb20c2c5e998c3f1d52ed6d5360319 upstream.

Code reimplements functionality already in `fec_ptp_read()`,
but misses check for FEC_QUIRK_BUG_CAPTURE. Replace with function call.

Fixes: 28b5f058cf ("net: fec: ptp: fix convergence issue to support LinuxPTP stack")
Signed-off-by: Csókás Bence <csokas.bence@prolan.hu>
Link: https://lore.kernel.org/r/20220811101348.13755-1-csokas.bence@prolan.hu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25 11:18:30 +02:00
Alan Brady
f861285de8 i40e: Fix to stop tx_timeout recovery if GLOBR fails
commit 57c942bc3bef0970f0b21f8e0998e76a900ea80d upstream.

When a tx_timeout fires, the PF attempts to recover by incrementally
resetting.  First we try a PFR, then CORER and finally a GLOBR.  If the
GLOBR fails, then we keep hitting the tx_timeout and incrementing the
recovery level and issuing dmesgs, which is both annoying to the user
and accomplishes nothing.

If the GLOBR fails, then we're pretty much totally hosed, and there's
not much else we can do to recover, so this makes it such that we just
kill the VSI and stop hitting the tx_timeout in such a case.

Fixes: 41c445ff0f ("i40e: main driver core")
Signed-off-by: Alan Brady <alan.brady@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25 11:18:30 +02:00
Grzegorz Siwik
781212b344 ice: Ignore EEXIST when setting promisc mode
commit 11e551a2efa4481bd4f616ab75374a2710b480e9 upstream.

Ignore EEXIST error when setting promiscuous mode.
This fix is needed because the driver could set promiscuous mode
when it still has not cleared properly.
Promiscuous mode could be set only once, so setting it second
time will be rejected.

Fixes: 5eda8afd6b ("ice: Add support for PF/VF promiscuous mode")
Signed-off-by: Grzegorz Siwik <grzegorz.siwik@intel.com>
Link: https://lore.kernel.org/all/CAK8fFZ7m-KR57M_rYX6xZN39K89O=LGooYkKsu6HKt0Bs+x6xQ@mail.gmail.com/
Tested-by: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com>
Tested-by: Igor Raits <igor@gooddata.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-08-25 11:18:30 +02:00