commit 5df5dafc171b90d0b8d51547a82657cd5a1986c7 upstream.
Do not set 'HCI_UART_PROTO_READY' before call 'hci_uart_register_dev()'.
Possible race is when someone calls 'hci_tty_uart_close()' after this bit
is set, but 'hci_uart_register_dev()' wasn't done. This leads to access
to uninitialized fields. To fix it let's set this bit after device was
registered (as before patch c411c62cc133) and to fix previous problem let's
add one more bit in addition to 'HCI_UART_PROTO_READY' which allows to
perform power up without original bit set (pls see commit c411c62cc133).
Crash backtrace from syzbot report:
RIP: 0010:skb_queue_empty_lockless include/linux/skbuff.h:1887 [inline]
RIP: 0010:skb_queue_purge_reason+0x6d/0x140 net/core/skbuff.c:3936
Call Trace:
<TASK>
skb_queue_purge include/linux/skbuff.h:3364 [inline]
mrvl_close+0x2f/0x90 drivers/bluetooth/hci_mrvl.c:100
hci_uart_tty_close+0xb6/0x120 drivers/bluetooth/hci_ldisc.c:557
tty_ldisc_close drivers/tty/tty_ldisc.c:455 [inline]
tty_ldisc_kill+0x66/0xc0 drivers/tty/tty_ldisc.c:613
tty_ldisc_release+0xc9/0x120 drivers/tty/tty_ldisc.c:781
tty_release_struct+0x10/0x80 drivers/tty/tty_io.c:1690
tty_release+0x4ef/0x640 drivers/tty/tty_io.c:1861
__fput+0x86/0x2a0 fs/file_table.c:450
task_work_run+0x82/0xb0 kernel/task_work.c:239
resume_user_mode_work include/linux/resume_user_mode.h:50 [inline]
exit_to_user_mode_loop kernel/entry/common.c:114 [inline]
exit_to_user_mode_prepare include/linux/entry-common.h:329 [inline]
__syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline]
syscall_exit_to_user_mode+0xa3/0x1b0 kernel/entry/common.c:218
do_syscall_64+0x9a/0x190 arch/x86/entry/common.c:89
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reported-by: syzbot+683f8cb11b94b1824c77@syzkaller.appspotmail.com
Tested-by: syzbot+683f8cb11b94b1824c77@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-bluetooth/d159c57f-8490-4c26-79da-6ad3612c4a14@salutedevices.com/
Fixes: 366ceff495f9 ("Bluetooth: hci_uart: fix race during initialization")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f2f29da9f0d4367f6ff35e0d9d021257bb53e273 upstream.
While debugging kexec/hibernation hangs and crashes, it turned out that
the current implementation of e820__register_nosave_regions() suffers from
multiple serious issues:
- The end of last region is tracked by PFN, causing it to find holes
that aren't there if two consecutive subpage regions are present
- The nosave PFN ranges derived from holes are rounded out (instead of
rounded in) which makes it inconsistent with how explicitly reserved
regions are handled
Fix this by:
- Treating reserved regions as if they were holes, to ensure consistent
handling (rounding out nosave PFN ranges is more correct as the
kernel does not use partial pages)
- Tracking the end of the last RAM region by address instead of pages
to detect holes more precisely
These bugs appear to have been introduced about ~18 years ago with the very
first version of e820_mark_nosave_regions(), and its flawed assumptions were
carried forward uninterrupted through various waves of rewrites and renames.
[ mingo: Added Git archeology details, for kicks and giggles. ]
Fixes: e8eff5ac29 ("[PATCH] Make swsusp avoid memory holes and reserved memory regions on x86_64")
Reported-by: Roberto Ricci <io@r-ricci.it>
Tested-by: Roberto Ricci <io@r-ricci.it>
Signed-off-by: Myrrh Periwinkle <myrrhperiwinkle@qtmlabs.xyz>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Len Brown <len.brown@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250406-fix-e820-nosave-v3-1-f3787bc1ee1d@qtmlabs.xyz
Closes: https://lore.kernel.org/all/Z4WFjBVHpndct7br@desktop0a/
Signed-off-by: Myrrh Periwinkle <myrrhperiwinkle@qtmlabs.xyz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1f2768b6a3ee77a295106e3a5d68458064923ede upstream.
If device_register(&child->dev) fails, call put_device() to explicitly
release child->dev, per the comment at device_register().
Found by code review.
Link: https://lore.kernel.org/r/20250202062357.872971-1-make24@iscas.ac.cn
Fixes: 4f535093cf ("PCI: Put pci_dev in device tree as early as possible")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 708124d9e6e7ac5ebf927830760679136b23fdf0 upstream.
of_irq_init() will leak interrupt controller device node refcounts
in two places as explained below:
1) Leak refcounts of both @desc->dev and @desc->interrupt_parent when
suffers @desc->irq_init_cb() failure.
2) Leak refcount of @desc->interrupt_parent when cleans up list
@intc_desc_list in the end.
Refcounts of both @desc->dev and @desc->interrupt_parent were got in
the first loop, but of_irq_init() does not put them before kfree(@desc)
in places mentioned above, so causes refcount leakages.
Fix by putting refcounts involved before kfree(@desc).
Fixes: 8363ccb917 ("of/irq: add missing of_node_put")
Fixes: c71a54b082 ("of/irq: introduce of_irq_init")
Cc: stable@vger.kernel.org
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20250209-of_irq_fix-v2-7-93e3a2659aa7@quicinc.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 962a2805e47b933876ba0e4c488d9e89ced2dd29 upstream.
In irq_of_parse_and_map(), refcount of device node @oirq.np was got
by successful of_irq_parse_one() invocation, but it does not put the
refcount before return, so causes @oirq.np refcount leakage.
Fix by putting @oirq.np refcount before return.
Fixes: e387344499 ("of/irq: Move irq_of_parse_and_map() to common code")
Cc: stable@vger.kernel.org
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20250209-of_irq_fix-v2-6-93e3a2659aa7@quicinc.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bbf71f44aaf241d853759a71de7e7ebcdb89be3d upstream.
of_irq_count() invokes of_irq_parse_one() to count IRQs, and successful
invocation of the later will get device node @irq.np refcount, but the
former does not put the refcount before next iteration invocation, hence
causes device node refcount leakages.
Fix by putting @irq.np refcount before the next iteration invocation.
Fixes: 3da5278727 ("of/irq: Rework of_irq_count()")
Cc: stable@vger.kernel.org
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20250209-of_irq_fix-v2-5-93e3a2659aa7@quicinc.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fd5625fc86922f36bedee5846fefd647b7e72751 upstream.
msi_db_mask is of type 'u64', still the standard 'int' arithmetic is
performed to compute its value.
While most of the ntb_hw drivers actually don't utilize the higher 32
bits of the doorbell mask now, this may be the case for Switchtec - see
switchtec_ntb_init_db().
Found by Linux Verification Center (linuxtesting.org) with SVACE static
analysis tool.
Fixes: 2b0569b3b7 ("NTB: Add MSI interrupt support to ntb_transport")
Cc: stable@vger.kernel.org
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c5672e310ad971d408752fce7596ed27adc6008f upstream.
Device can be unbound, so driver must also release memory for the wakeup
source.
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250406202245.53854-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 42ea22e754ba4f2b86f8760ca27f6f71da2d982c upstream.
When the kernel contains a large number of functions that can be traced,
the loop in ftrace_graph_set_hash() may take a lot of time to execute.
This may trigger the softlockup watchdog.
Add cond_resched() within the loop to allow the kernel to remain
responsive even when processing a large number of functions.
This matches the cond_resched() that is used in other locations of the
code that iterates over all functions that can be traced.
Cc: stable@vger.kernel.org
Fixes: b9b0c831be ("ftrace: Convert graph filter to use hash tables")
Link: https://lore.kernel.org/tencent_3E06CE338692017B5809534B9C5C03DA7705@qq.com
Signed-off-by: zhoumin <teczm@foxmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 00204ae3d6712ee053353920e3ce2b00c35ef75b upstream.
The dm-integrity target didn't set the error string when memory
allocation failed. This patch fixes it.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 07bb097b92b987db518e72525b515d77904e966e upstream.
Currently, the ASP primary device check does not have support for PCI
domains, and, as a result, when the system is configured with PCI domains
(PCI segments) the wrong device can be selected as primary. This results
in commands submitted to the device timing out and failing. The device
check also relies on specific device and function assignments that may
not hold in the future.
Fix the primary ASP device check to include support for PCI domains and
to perform proper checking of the Bus/Device/Function positions.
Fixes: 2a6170dfe7 ("crypto: ccp: Add Platform Security Processor (PSP) device support")
Cc: stable@vger.kernel.org
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ee022e5cae052e0c67ca7c5fec0f2e7bc897c70e upstream.
The mapping table for the rk3328 is missing the entry for -25C which is
found in the TRM section 9.5.2 "Temperature-to-code mapping".
NOTE: the kernel uses the tsadc_q_sel=1'b1 mode which is defined as:
4096-<code in table>. Whereas the table in the TRM gives the code
"3774" for -25C, the kernel uses 4096-3774=322.
[Dragan Simic] : "After going through the RK3308 and RK3328 TRMs, as
well as through the downstream kernel code, it seems we may have
some troubles at our hands. Let me explain, please.
To sum it up, part 1 of the RK3308 TRM v1.1 says on page 538 that
the equation for the output when tsadc_q_sel equals 1 is (4096 -
tsadc_q), while part 1 of the RK3328 TRM v1.2 says that the output
equation is (1024 - tsadc_q) in that case.
The downstream kernel code, however, treats the RK3308 and RK3328
tables and their values as being the same. It even mentions 1024 as
the "offset" value in a comment block for the rk_tsadcv3_control()
function, just like the upstream code does, which is obviously wrong
"offset" value when correlated with the table on page 544 of part 1
of the RK3308 TRM v1.1.
With all this in mind, it's obvious that more work is needed to make
it clear where's the actual mistake (it could be that the TRM is
wrong), which I'll volunteer for as part of the SoC binning project.
In the meantime, this patch looks fine as-is to me, by offering
what's a clear improvement to the current state of the upstream
code"
Link: https://opensource.rock-chips.com/images/9/97/Rockchip_RK3328TRM_V1.1-Part1-20170321.pdf
Cc: stable@vger.kernel.org
Fixes: eda519d5f7 ("thermal: rockchip: Support the RK3328 SOC in thermal driver")
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/20250207175048.35959-1-twoerner@gmail.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f1a69a940de58b16e8249dff26f74c8cc59b32be upstream.
sctp_sendmsg() re-uses associations and transports when possible by
doing a lookup based on the socket endpoint and the message destination
address, and then sctp_sendmsg_to_asoc() sets the selected transport in
all the message chunks to be sent.
There's a possible race condition if another thread triggers the removal
of that selected transport, for instance, by explicitly unbinding an
address with setsockopt(SCTP_SOCKOPT_BINDX_REM), after the chunks have
been set up and before the message is sent. This can happen if the send
buffer is full, during the period when the sender thread temporarily
releases the socket lock in sctp_wait_for_sndbuf().
This causes the access to the transport data in
sctp_outq_select_transport(), when the association outqueue is flushed,
to result in a use-after-free read.
This change avoids this scenario by having sctp_transport_free() signal
the freeing of the transport, tagging it as "dead". In order to do this,
the patch restores the "dead" bit in struct sctp_transport, which was
removed in
commit 47faa1e4c5 ("sctp: remove the dead field of sctp_transport").
Then, in the scenario where the sender thread has released the socket
lock in sctp_wait_for_sndbuf(), the bit is checked again after
re-acquiring the socket lock to detect the deletion. This is done while
holding a reference to the transport to prevent it from being freed in
the process.
If the transport was deleted while the socket lock was relinquished,
sctp_sendmsg_to_asoc() will return -EAGAIN to let userspace retry the
send.
The bug was found by a private syzbot instance (see the error report [1]
and the C reproducer that triggers it [2]).
Link: https://people.igalia.com/rcn/kernel_logs/20250402__KASAN_slab-use-after-free_Read_in_sctp_outq_select_transport.txt [1]
Link: https://people.igalia.com/rcn/kernel_logs/20250402__KASAN_slab-use-after-free_Read_in_sctp_outq_select_transport__repro.c [2]
Cc: stable@vger.kernel.org
Fixes: df132eff46 ("sctp: clear the transport of some out_chunk_list chunks in sctp_assoc_rm_peer")
Suggested-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Ricardo Cañuelo Navarro <rcn@igalia.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20250404-kasan_slab-use-after-free_read_in_sctp_outq_select_transport__20250404-v1-1-5ce4a0b78ef2@igalia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c0ebbb3841e07c4493e6fe351698806b09a87a37 upstream.
The PGDAT_RECLAIM_LOCKED bit is used to provide mutual exclusion of node
reclaim for struct pglist_data using a single bit.
It is "locked" with a test_and_set_bit (similarly to a try lock) which
provides full ordering with respect to loads and stores done within
__node_reclaim().
It is "unlocked" with clear_bit(), which does not provide any ordering
with respect to loads and stores done before clearing the bit.
The lack of clear_bit() memory ordering with respect to stores within
__node_reclaim() can cause a subsequent CPU to fail to observe stores from
a prior node reclaim. This is not an issue in practice on TSO (e.g.
x86), but it is an issue on weakly-ordered architectures (e.g. arm64).
Fix this by using clear_bit_unlock rather than clear_bit to clear
PGDAT_RECLAIM_LOCKED with a release memory ordering semantic.
This provides stronger memory ordering (release rather than relaxed).
Link: https://lkml.kernel.org/r/20250312141014.129725-1-mathieu.desnoyers@efficios.com
Fixes: d773ed6b85 ("mm: test and set zone reclaim lock before starting reclaim")
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Andrea Parri <parri.andrea@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jade Alglave <j.alglave@ucl.ac.uk>
Cc: Luc Maranget <luc.maranget@inria.fr>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a1d416bf9faf4f4871cb5a943614a07f80a7d70f upstream.
Since commit 38e0edb15b ("mm/apply_to_range: call pte function with lazy
updates") it's been possible for arch_[enter|leave]_lazy_mmu_mode() to be
called without holding a page table lock (for the kernel mappings case),
and therefore it is possible that preemption may occur while in the lazy
mmu mode. The Sparc lazy mmu implementation is not robust to preemption
since it stores the lazy mode state in a per-cpu structure and does not
attempt to manage that state on task switch.
Powerpc had the same issue and fixed it by explicitly disabling preemption
in arch_enter_lazy_mmu_mode() and re-enabling in
arch_leave_lazy_mmu_mode(). See commit b9ef323ea168 ("powerpc/64s:
Disable preemption in hash lazy mmu mode").
Given Sparc's lazy mmu mode is based on powerpc's, let's fix it in the
same way here.
Link: https://lkml.kernel.org/r/20250303141542.3371656-4-ryan.roberts@arm.com
Fixes: 38e0edb15b ("mm/apply_to_range: call pte function with lazy updates")
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Andreas Larsson <andreas@gaisler.com>
Acked-by: Juergen Gross <jgross@suse.com>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Juegren Gross <jgross@suse.com>
Cc: Matthew Wilcow (Oracle) <willy@infradead.org>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 46ad36002088eff8fc5cae200aa42ae9f9310ddd upstream.
The MT8173 disp-pwm device should have only one compatible string, based
on the following DT validation error:
arch/arm64/boot/dts/mediatek/mt8173-elm.dtb: pwm@1401e000: compatible: 'oneOf' conditional failed, one must be fixed:
['mediatek,mt8173-disp-pwm', 'mediatek,mt6595-disp-pwm'] is too long
'mediatek,mt8173-disp-pwm' is not one of ['mediatek,mt6795-disp-pwm', 'mediatek,mt8167-disp-pwm']
'mediatek,mt8173-disp-pwm' is not one of ['mediatek,mt8186-disp-pwm', 'mediatek,mt8188-disp-pwm', 'mediatek,mt8192-disp-pwm', 'mediatek,mt8195-disp-pwm', 'mediatek,mt8365-disp-pwm']
'mediatek,mt8173-disp-pwm' was expected
'mediatek,mt8183-disp-pwm' was expected
from schema $id: http://devicetree.org/schemas/pwm/mediatek,pwm-disp.yaml#
arch/arm64/boot/dts/mediatek/mt8173-elm.dtb: pwm@1401f000: compatible: 'oneOf' conditional failed, one must be fixed:
['mediatek,mt8173-disp-pwm', 'mediatek,mt6595-disp-pwm'] is too long
'mediatek,mt8173-disp-pwm' is not one of ['mediatek,mt6795-disp-pwm', 'mediatek,mt8167-disp-pwm']
'mediatek,mt8173-disp-pwm' is not one of ['mediatek,mt8186-disp-pwm', 'mediatek,mt8188-disp-pwm', 'mediatek,mt8192-disp-pwm', 'mediatek,mt8195-disp-pwm', 'mediatek,mt8365-disp-pwm']
'mediatek,mt8173-disp-pwm' was expected
'mediatek,mt8183-disp-pwm' was expected
from schema $id: http://devicetree.org/schemas/pwm/mediatek,pwm-disp.yaml#
Drop the extra "mediatek,mt6595-disp-pwm" compatible string.
Fixes: 61aee93425 ("arm64: dts: mt8173: add MT8173 display PWM driver support node")
Cc: YH Huang <yh.huang@mediatek.com>
Cc: stable@vger.kernel.org # v4.5+
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250108083424.2732375-2-wenst@chromium.org
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b79fe1829975556854665258cf4d2476784a89db upstream.
In r852_ready(), the dev get from r852_get_dev() need to be checked.
An unstable device should not be ready. A proper implementation can
be found in r852_read_byte(). Add a status check and return 0 when it is
unstable.
Fixes: 50a487e771 ("mtd: rawnand: Pass a nand_chip object to chip->dev_ready()")
Cc: stable@vger.kernel.org # v4.20+
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d027951dc85cb2e15924c980dc22a6754d100c7c upstream.
In INFTL_findwriteunit(), the return value of inftl_read_oob()
need to be checked. A proper implementation can be
found in INFTL_deleteblock(). The status will be set as
SECTOR_IGNORE to break from the while-loop correctly
if the inftl_read_oob() fails.
Fixes: 8593fbc68b ("[MTD] Rework the out of band handling completely")
Cc: stable@vger.kernel.org # v2.6+
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8b46fdaea819a679da176b879e7b0674a1161a5e upstream.
The split_sg_phys function was incorrectly setting the offsets of all
scatterlist entries (except the first) to 0. Only the first scatterlist
entry's offset and length needs to be modified to account for the skip.
Setting the rest entries' offsets to 0 could lead to incorrect data
access.
I am using this function in a crypto driver that I'm currently developing
(not yet sent to mailing list). During testing, it was observed that the
output scatterlists (except the first one) contained incorrect garbage
data.
I narrowed this issue down to the call of sg_split(). Upon debugging
inside this function, I found that this resetting of offset is the cause
of the problem, causing the subsequent scatterlists to point to incorrect
memory locations in a page. By removing this code, I am obtaining
expected data in all the split output scatterlists. Thus, this was indeed
causing observable runtime effects!
This patch removes the offending code, ensuring that the page offsets in
the input scatterlist are preserved in the output scatterlist.
Link: https://lkml.kernel.org/r/20250319111437.1969903-1-t-pratham@ti.com
Fixes: f8bcbe62ac ("lib: scatterlist: add sg splitting function")
Signed-off-by: T Pratham <t-pratham@ti.com>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kamlesh Gurudasani <kamlesh@ti.com>
Cc: Praneeth Bajjuri <praneeth@ti.com>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 495f53d5cca0f939eaed9dca90b67e7e6fb0e30c upstream.
Currently, when a lock class is allocated, nr_unused_locks will be
increased by 1, until it gets used: nr_unused_locks will be decreased by
1 in mark_lock(). However, one scenario is missed: a lock class may be
zapped without even being used once. This could result into a situation
that nr_unused_locks != 0 but no unused lock class is active in the
system, and when `cat /proc/lockdep_stats`, a WARN_ON() will
be triggered in a CONFIG_DEBUG_LOCKDEP=y kernel:
[...] DEBUG_LOCKS_WARN_ON(debug_atomic_read(nr_unused_locks) != nr_unused)
[...] WARNING: CPU: 41 PID: 1121 at kernel/locking/lockdep_proc.c:283 lockdep_stats_show+0xba9/0xbd0
And as a result, lockdep will be disabled after this.
Therefore, nr_unused_locks needs to be accounted correctly at
zap_class() time.
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Waiman Long <longman@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250326180831.510348-1-boqun.feng@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e6eff39dd0fe4190c6146069cc16d160e71d1148 upstream.
Journal emptiness is not determined by sb->s_sequence == 0 but rather by
sb->s_start == 0 (which is set a few lines above). Furthermore 0 is a
valid transaction ID so the check can spuriously trigger. Remove the
invalid WARN_ON.
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Link: https://patch.msgid.link/20250206094657.20865-3-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bd496a44f041da9ef3afe14d1d6193d460424e91 upstream.
The I3C master driver may receive an IBI from a target device that has not
been probed yet. In such cases, the master calls `i3c_master_queue_ibi()`
to queue an IBI work task, leading to "Unable to handle kernel read from
unreadable memory" and resulting in a kernel panic.
Typical IBI handling flow:
1. The I3C master scans target devices and probes their respective drivers.
2. The target device driver calls `i3c_device_request_ibi()` to enable IBI
and assigns `dev->ibi = ibi`.
3. The I3C master receives an IBI from the target device and calls
`i3c_master_queue_ibi()` to queue the target device driver’s IBI
handler task.
However, since target device events are asynchronous to the I3C probe
sequence, step 3 may occur before step 2, causing `dev->ibi` to be `NULL`,
leading to a kernel panic.
Add a NULL pointer check in `i3c_master_queue_ibi()` to prevent accessing
an uninitialized `dev->ibi`, ensuring stability.
Fixes: 3a379bbcea ("i3c: Add core I3C infrastructure")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/lkml/Z9gjGYudiYyl3bSe@lizhi-Precision-Tower-5810/
Signed-off-by: Manjunatha Venkatesh <manjunatha.venkatesh@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250326123047.2797946-1-manjunatha.venkatesh@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 94824ac9a8aaf2fb3c54b4bdde842db80ffa555d upstream.
Syzkaller detected a use-after-free issue in ext4_insert_dentry that was
caused by out-of-bounds access due to incorrect splitting in do_split.
BUG: KASAN: use-after-free in ext4_insert_dentry+0x36a/0x6d0 fs/ext4/namei.c:2109
Write of size 251 at addr ffff888074572f14 by task syz-executor335/5847
CPU: 0 UID: 0 PID: 5847 Comm: syz-executor335 Not tainted 6.12.0-rc6-syzkaller-00318-ga9cda7c0ffed #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/30/2024
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:377 [inline]
print_report+0x169/0x550 mm/kasan/report.c:488
kasan_report+0x143/0x180 mm/kasan/report.c:601
kasan_check_range+0x282/0x290 mm/kasan/generic.c:189
__asan_memcpy+0x40/0x70 mm/kasan/shadow.c:106
ext4_insert_dentry+0x36a/0x6d0 fs/ext4/namei.c:2109
add_dirent_to_buf+0x3d9/0x750 fs/ext4/namei.c:2154
make_indexed_dir+0xf98/0x1600 fs/ext4/namei.c:2351
ext4_add_entry+0x222a/0x25d0 fs/ext4/namei.c:2455
ext4_add_nondir+0x8d/0x290 fs/ext4/namei.c:2796
ext4_symlink+0x920/0xb50 fs/ext4/namei.c:3431
vfs_symlink+0x137/0x2e0 fs/namei.c:4615
do_symlinkat+0x222/0x3a0 fs/namei.c:4641
__do_sys_symlink fs/namei.c:4662 [inline]
__se_sys_symlink fs/namei.c:4660 [inline]
__x64_sys_symlink+0x7a/0x90 fs/namei.c:4660
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
The following loop is located right above 'if' statement.
for (i = count-1; i >= 0; i--) {
/* is more than half of this entry in 2nd half of the block? */
if (size + map[i].size/2 > blocksize/2)
break;
size += map[i].size;
move++;
}
'i' in this case could go down to -1, in which case sum of active entries
wouldn't exceed half the block size, but previous behaviour would also do
split in half if sum would exceed at the very last block, which in case of
having too many long name files in a single block could lead to
out-of-bounds access and following use-after-free.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Cc: stable@vger.kernel.org
Fixes: 5872331b3d91 ("ext4: fix potential negative array index in do_split()")
Signed-off-by: Artem Sadovnikov <a.sadovnikov@ispras.ru>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20250404082804.2567-3-a.sadovnikov@ispras.ru
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d00c0c4105e5ab8a6a13ed23d701cceb285761fa upstream.
Since the new_metric and last_hop_metric variables can reach
the MAX_METRIC(0xffffffff) value, an integer overflow may occur
when multiplying them by 10/9. It can lead to incorrect behavior.
Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with SVACE.
Fixes: a8d418d9ac ("mac80211: mesh: only switch path when new metric is at least 10% better")
Cc: stable@vger.kernel.org
Signed-off-by: Ilia Gavrilov <Ilia.Gavrilov@infotecs.ru>
Link: https://patch.msgid.link/20250212082124.4078236-1-Ilia.Gavrilov@infotecs.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1ebc8e1ef906db9c08e9abe9776d85ddec837725 upstream.
Implement the workaround for erratum
3.3 RGMII timing may be out of spec when transmit delay is enabled
for the 6320 family, which says:
When transmit delay is enabled via Port register 1 bit 14 = 1, duty
cycle may be out of spec. Under very rare conditions this may cause
the attached device receive CRC errors.
Signed-off-by: Marek Behún <kabel@kernel.org>
Cc: <stable@vger.kernel.org> # 5.4.x
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250317173250.28780-8-kabel@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 172bf5a9ef70a399bb227809db78442dc01d9e48 upstream.
There is a possibility that init_codecs is invoked multiple times during
manipulated payload from video firmware. In such case, if codecs_count
can get incremented to value more than MAX_CODEC_NUM, there can be OOB
access. Reset the count so that it always starts from beginning.
Cc: stable@vger.kernel.org
Fixes: 1a73374a04 ("media: venus: hfi_parser: add common capability parser")
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3d391292cdd53984ec1b9a1f6182a62a62751e03 upstream.
Lift the xshutdown (enable) GPIO 1 ms after enabling the regulators, as
required by the sensor's power-up sequence.
Fixes: d30bb512da ("media: Add a driver for the ov7251 camera sensor")
Cc: stable@vger.kernel.org
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a1963698d59cec83df640ded343af08b76c8e9c5 upstream.
Set the enable GPIO low when acquiring it.
Fixes: d30bb512da ("media: Add a driver for the ov7251 camera sensor")
Cc: stable@vger.kernel.org
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3edd1fc48d2c045e8259561797c89fe78f01717e upstream.
In v4l2_detect_gtf(), it seems safer to cast the 32-bit image_width
variable to the 64-bit type u64 before multiplying to avoid
a possible overflow. The resulting object code even seems to
look better, at least on x86_64.
Found by Linux Verification Center (linuxtesting.org) with Svace.
[Sergey: rewrote the patch subject/descripition]
Fixes: c9bc9f5075 ("[media] v4l2-dv-timings: fix overflow in gtf timings calculation")
Cc: stable@vger.kernel.org
Signed-off-by: Karina Yankevich <k.yankevich@omp.ru>
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 549f6d348167fb2f7800ed7c8d4bce9630c74498 upstream.
If streamzap_callback() receives an urb with any non-critical error
status, i.e. any error code other than -ECONNRESET, -ENOENT or -ESHUTDOWN,
it will try to process IR data, ignoring a possible transfer failure.
Make streamzap_callback() process IR data only when urb->status is 0.
Move processing logic to a separate function to make code cleaner and
more similar to the URB completion handlers in other RC drivers.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: 19770693c3 ("V4L/DVB: staging/lirc: add lirc_streamzap driver")
Cc: stable@vger.kernel.org
Signed-off-by: Murad Masimov <m.masimov@mt-integration.ru>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a9b5bd81b294d30a747edd125e9f6aef2def7c79 upstream.
>From the TRM, MIDR_CORTEX_A76AE has a partnum of 0xDOE and an
implementor of 0x41 (ARM). Add the values.
Cc: stable@vger.kernel.org # dependency of the next fix in the series
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250107120555.v4.4.I151f3b7ee323bcc3082179b8c60c3cd03308aa94@changeid
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5c4e79e29a9fe4ea132118ac40c2bc97cfe23077 upstream.
The interface specifies the symnum field as an input and output; the
hypervisor sets it to the next sequential symbol's index. xensyms_next()
incrementing the position explicitly (and xensyms_next_sym()
decrementing it to "rewind") is only correct as long as the sequence of
symbol indexes is non-sparse. Use the hypervisor-supplied value instead
to update the position in xensyms_next(), and use the saved incoming
index in xensyms_next_sym().
Cc: stable@kernel.org
Fixes: a11f4f0a4e ("xen: xensyms support")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Message-ID: <15d5e7fa-ec5d-422f-9319-d28bed916349@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 734ac57e47b3bdd140a1119e2c4e8e6f8ef8b33d upstream.
The smsdvb_module_init() returns without checking the retval from
smscore_register_hotplug().
If the smscore_register_hotplug() failed, the module failed to install,
leaving the smsdvb_debugfs not unregistered.
Fixes: 3f6b87cff6 ("[media] siano: allow showing the complete statistics via debugfs")
Cc: stable@vger.kernel.org
Signed-off-by: Yuan Can <yuancan@huawei.com>
Acked-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 69baf245b23e20efda0079238b27fc63ecf13de1 upstream.
qsize represents size of shared queued between driver and video
firmware. Firmware can modify this value to an invalid large value. In
such situation, empty_space will be bigger than the space actually
available. Since new_wr_idx is not checked, so the following code will
result in an OOB write.
...
qsize = qhdr->q_size
if (wr_idx >= rd_idx)
empty_space = qsize - (wr_idx - rd_idx)
....
if (new_wr_idx < qsize) {
memcpy(wr_ptr, packet, dwords << 2) --> OOB write
Add check to ensure qsize is within the allocated size while
reading and writing packets into the queue.
Cc: stable@vger.kernel.org
Fixes: d96d3f30c0 ("[media] media: venus: hfi: add Venus HFI files")
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f4b211714bcc70effa60c34d9fa613d182e3ef1e upstream.
sfr->buf_size is in shared memory and can be modified by malicious user.
OOB write is possible when the size is made higher than actual sfr data
buffer. Cap the size to allocated size for such cases.
Cc: stable@vger.kernel.org
Fixes: d96d3f30c0 ("[media] media: venus: hfi: add Venus HFI files")
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9e38acacb9d809b97a0bdc5c76e725355a47158a upstream.
The mask to select the test-pattern in register ADV748X_SDP_FRP is
incorrect, it's the lower 3 bits which controls the pattern. The
GENMASK() macro is used incorrectly and the generated mask is 0x0e
instead of 0x07.
The result is that not all test patterns are selectable, and that in
some cases the wrong test pattern is activated. Fix this by correcting
the GENMASK().
Fixes: 3e89586a64 ("media: i2c: adv748x: add adv748x driver")
Cc: stable@vger.kernel.org
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
[hverkuil: fixed tiny typo in commit log: my -> by]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 642335f3ea2b3fd6dba03e57e01fa9587843a497 ]
A file handle that userspace provides to open_by_handle_at() can
legitimately contain an outdated inode number that has since been reused
for another purpose - that's why the file handle also contains a generation
number.
But if the inode number has been reused for an ea_inode, check_igot_inode()
will notice, __ext4_iget() will go through ext4_error_inode(), and if the
inode was newly created, it will also be marked as bad by iget_failed().
This all happens before the point where the inode generation is checked.
ext4_error_inode() is supposed to only be used on filesystem corruption; it
should not be used when userspace just got unlucky with a stale file
handle. So when this happens, let __ext4_iget() just return an error.
Fixes: b3e6bcb94590 ("ext4: add EA_INODE checking to ext4_iget()")
Signed-off-by: Jann Horn <jannh@google.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20241129-ext4-ignore-ea-fhandle-v1-1-e532c0d1cee0@google.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8216776ccff6fcd40e3fdaa109aa4150ebe760b3 ]
It is invalid for the casefold inode flag to be set without the casefold
superblock feature flag also being set. e2fsck already considers this
case to be invalid and handles it by offering to clear the casefold flag
on the inode. __ext4_iget() also already considered this to be invalid,
sort of, but it only got so far as logging an error message; it didn't
actually reject the inode. Make it reject the inode so that other code
doesn't have to handle this case. This matches what f2fs does.
Note: we could check 's_encoding != NULL' instead of
ext4_has_feature_casefold(). This would make the check robust against
the casefold feature being enabled by userspace writing to the page
cache of the mounted block device. However, it's unsolvable in general
for filesystems to be robust against concurrent writes to the page cache
of the mounted block device. Though this very particular scenario
involving the casefold feature is solvable, we should not pretend that
we can support this model, so let's just check the casefold feature.
tune2fs already forbids enabling casefold on a mounted filesystem.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20230814182903.37267-2-ebiggers@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: 642335f3ea2b ("ext4: don't treat fhandle lookup of ea_inode as FS corruption")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d4bac0288a2b444e468e6df9cb4ed69479ddf14a ]
Classic BPF socket filters with SKB_NET_OFF and SKB_LL_OFF fail to
read when these offsets extend into frags.
This has been observed with iwlwifi and reproduced with tun with
IFF_NAPI_FRAGS. The below straightforward socket filter on UDP port,
applied to a RAW socket, will silently miss matching packets.
const int offset_proto = offsetof(struct ip6_hdr, ip6_nxt);
const int offset_dport = sizeof(struct ip6_hdr) + offsetof(struct udphdr, dest);
struct sock_filter filter_code[] = {
BPF_STMT(BPF_LD + BPF_B + BPF_ABS, SKF_AD_OFF + SKF_AD_PKTTYPE),
BPF_JUMP(BPF_JMP + BPF_JEQ + BPF_K, PACKET_HOST, 0, 4),
BPF_STMT(BPF_LD + BPF_B + BPF_ABS, SKF_NET_OFF + offset_proto),
BPF_JUMP(BPF_JMP + BPF_JEQ + BPF_K, IPPROTO_UDP, 0, 2),
BPF_STMT(BPF_LD + BPF_H + BPF_ABS, SKF_NET_OFF + offset_dport),
This is unexpected behavior. Socket filter programs should be
consistent regardless of environment. Silent misses are
particularly concerning as hard to detect.
Use skb_copy_bits for offsets outside linear, same as done for
non-SKF_(LL|NET) offsets.
Offset is always positive after subtracting the reference threshold
SKB_(LL|NET)_OFF, so is always >= skb_(mac|network)_offset. The sum of
the two is an offset against skb->data, and may be negative, but it
cannot point before skb->head, as skb_(mac|network)_offset would too.
This appears to go back to when frag support was introduced to
sk_run_filter in linux-2.4.4, before the introduction of git.
The amount of code change and 8/16/32 bit duplication are unfortunate.
But any attempt I made to be smarter saved very few LoC while
complicating the code.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Link: https://lore.kernel.org/netdev/20250122200402.3461154-1-maze@google.com/
Link: https://elixir.bootlin.com/linux/2.4.4/source/net/core/filter.c#L244
Reported-by: Matt Moeller <moeller.matt@gmail.com>
Co-developed-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://lore.kernel.org/r/20250408132833.195491-2-willemdebruijn.kernel@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 96a233e600df351bcb06e3c20efe048855552926 ]
A couple of the syscalls which load values (bpf_skb_load_helper_16() and
bpf_skb_load_helper_32()) are using u16/u32 types which are triggering
warnings as they are then converted from big-endian to CPU-endian. Fix
these by making the types __be instead.
Fixes the following sparse warnings:
net/core/filter.c:246:32: warning: cast to restricted __be16
net/core/filter.c:246:32: warning: cast to restricted __be16
net/core/filter.c:246:32: warning: cast to restricted __be16
net/core/filter.c:246:32: warning: cast to restricted __be16
net/core/filter.c:273:32: warning: cast to restricted __be32
net/core/filter.c:273:32: warning: cast to restricted __be32
net/core/filter.c:273:32: warning: cast to restricted __be32
net/core/filter.c:273:32: warning: cast to restricted __be32
net/core/filter.c:273:32: warning: cast to restricted __be32
net/core/filter.c:273:32: warning: cast to restricted __be32
Signed-off-by: Ben Dooks <ben.dooks@sifive.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220714105101.297304-1-ben.dooks@sifive.com
Stable-dep-of: d4bac0288a2b ("bpf: support SKF_NET_OFF and SKF_LL_OFF on skb frags")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 928446a5302eee30ebb32075c0db5dda5a138fb7 ]
Considering that the driver doesn't enable the used clocks (and also
that clk_get_rate() returns 0 if CONFIG_HAVE_CLK is unset) better check
the return value of clk_get_rate() for being non-zero before dividing by
it.
Fixes: 3479bbd1e1 ("pwm: fsl-ftm: More relaxed permissions for updating period")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/b68351a51017035651bc62ad3146afcb706874f0.1743501688.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7ca59947b5fcf94e7ea4029d1bd0f7c41500a161 ]
With CONFIG_COMPILE_TEST && !CONFIG_HAVE_CLK, pwm_mediatek_config() has a
divide-by-zero in the following line:
do_div(resolution, clk_get_rate(pc->clk_pwms[pwm->hwpwm]));
due to the fact that the !CONFIG_HAVE_CLK version of clk_get_rate()
returns zero.
This is presumably just a theoretical problem: COMPILE_TEST overrides
the dependency on RALINK which would select COMMON_CLK. Regardless it's
a good idea to check for the error explicitly to avoid divide-by-zero.
Fixes the following warning:
drivers/pwm/pwm-mediatek.o: warning: objtool: .text: unexpected end of section
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/fb56444939325cc173e752ba199abd7aeae3bf12.1742852847.git.jpoimboe@kernel.org
[ukleinek: s/CONFIG_CLK/CONFIG_HAVE_CLK/]
Fixes: caf065f8fd ("pwm: Add MediaTek PWM support")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/9e78a0796acba3435553ed7db1c7965dcffa6215.1743501688.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0c0ead76235db0bcfaab83f04db546995449d002 ]
The MediaTek PWM IP can sometimes use the 26 MHz source clock to
generate the PWM signal, but the driver currently assumes that we always
use the PWM bus clock to generate the PWM signal.
This commit modifies the PWM driver in order to force the PWM IP to
always use the bus clock as source clock.
I do not have the datasheet of all the MediaTek SoC, so I don't know if
the register to choose the source clock is present in all the SoCs or
only in subset. As a consequence I made this change optional by using a
platform data paremeter to says whether this register is supported or
not. On all the SoCs I don't have the datasheet (MT2712, MT7622, MT7623,
MT7628, MT7629) I kept the behavior to be the same as before this
change.
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Stable-dep-of: 7ca59947b5fc ("pwm: mediatek: Prevent divide-by-zero in pwm_mediatek_config()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3e411827f31db7f938a30a3c7a7599839401ec30 ]
Function dispc_ovl_setup is not intended to work with the value OMAP_DSS_WB
of the enum parameter plane.
The value of this parameter is initialized in dss_init_overlays and in the
current state of the code it cannot take this value so it's not a real
problem.
For the purposes of defensive coding it wouldn't be superfluous to check
the parameter value, because some functions down the call stack process
this value correctly and some not.
For example, in dispc_ovl_setup_global_alpha it may lead to buffer
overflow.
Add check for this value.
Found by Linux Verification Center (linuxtesting.org) with SVACE static
analysis tool.
Signed-off-by: Leonid Arapov <arapovl839@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 473c33f5ce651365468503c76f33158aaa1c7dd2 ]
In preparation for adding support for MT8195's HDMI reserved
DPI, add calls to clk_prepare_enable() / clk_disable_unprepare()
for the TVD clock: in this particular case, the aforementioned
clock is not (and cannot be) parented to neither pixel or engine
clocks hence it won't get enabled automatically by the clock
framework.
Please note that on all of the currently supported MediaTek
platforms, the TVD clock is always a parent of either pixel or
engine clocks, and this means that the common clock framework
is already enabling this clock before the children.
On such platforms, this commit will only increase the refcount
of the TVD clock without any functional change.
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250217154836.108895-10-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7919b4cad5545ed93778f11881ceee72e4dbed66 ]
If GPU in reset, destroy_queue return -EIO, pqm_destroy_queue should
delete the queue from process_queue_list and free the resource.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e90711946b53590371ecce32e8fcc381a99d6333 ]
If queue size is less than minimum, clamp it to minimum to prevent
underflow when writing queue mqd.
Signed-off-by: David Yat Sin <David.YatSin@amd.com>
Reviewed-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a860eb9c6ba6cdbf32e3e01a606556e5a90a2931 ]
Some GPD Win 2 units shipped with the correct DMI strings.
Add a DMI match to correctly rotate the panel on these units.
Signed-off-by: Andrew Wyatt <fewtarius@steamfork.org>
Signed-off-by: John Edwards <uejji@uejji.net>
Tested-by: Paco Avelar <pacoavelar@hotmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20250213222455.93533-5-uejji@uejji.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eb8f1e3e8ee10cff591d4a47437dfd34d850d454 ]
AYANEO 2S uses the same panel and orientation as the AYANEO 2.
Update the AYANEO 2 DMI match to also match AYANEO 2S.
Signed-off-by: Andrew Wyatt <fewtarius@steamfork.org>
Signed-off-by: John Edwards <uejji@uejji.net>
Tested-by: John Edwards <uejji@uejji.net>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20250213222455.93533-2-uejji@uejji.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
