Add a secure display heap of size 164 MB for carveout memory
required to support 3 concurrent secure Video sessions.
Change-Id: I5d88df171370e7f3cc9ad723db1d2736e1bf614f
Document usage of interconnects and interconnect-names properties
for the USB controller node. This replaces the now obsolete msm_bus
bindings.
Change-Id: I4a1a2cd6a115584986bba28ba121d3fbea7cb409
QTI battery glink debug device helps to get logs and debug
information by communicating with charger firmware running on the
remote subsystem (e.g. DSP) over PMIC Glink.
Change-Id: I3a894b40bbbb67dbe26ad683cfabe330bf7e3d69
Add proxy-consumer properties to the VDD_MMCX rpmh-regulator
device node so that VDD_MMCX is kept enabled starting from
early in the application processor's boot sequence. This
avoids issues when accessing multimedia clock controller
registers at initialization time.
Additionally, add proxy-consumer properties to the VDD_CX and
VDD_MX device nodes to avoid potential issues caused by a
clock voting for a lower voltage level than what is physically
required by a clock that is initialized at a later point.
Change-Id: I4de02193c6d1e29664e9cb3198b56dca9956ccce
Update the min and max voltage limits for Lahaina RPMh regulator
devices so that they match the limits imposed by boot loaders.
Update initial voltages where necessary to bring them into the
new min/max ranges.
Also, add support for PM8350B LDO 1 and remove support for PM8350
LDO 10 to match the resources being exposed by RPMh. Lastly,
move VDD_EBI level control support from PM8350C SMPS 3 to SMPS 2
to match the finalized power grid.
Change-Id: Ie816a5ba2ae11b8c60377e5bb3620dbafb6085a1
Swr dmic powers up using standalone mic bias widget.
Update the device tree routing to replace analog mic
bias widget with the standalone mic bias widget.
Change-Id: If8e74283f02a5c1bc173720778d6f03649264606
Triggering enable and disable of swr dmic power supply
mic bias using widget name is more straight forward
than using mic bias number. Replace the number with
widget name instead.
Change-Id: Ie56ee41926249a044ab0f1bc197235c47803e46d
Replace mic bias number with widget string property to
swr mic device tree documentation for Lahaina target.
Change-Id: Ic14ae2cb66867c60a2a8ccf24b26446df6ae673b
Add interconnect bcm voter devices for display specific RSC
and phandles for interconnect NoC devies to target display RSC.
Change-Id: I72b310ab0cc7a3f673452e6b333f5a428eb80f4b
Add proxy consumer configurations for PM8350 LDO 5 and LDO 6
which ensure that these regulators are kept enabled in high
power mode until all consumers have a chance to make their own
requests.
Change-Id: Ia159e39418ce67585f6c81deeaf4ee3b1c52fcf7
On Lahaina,
- GPIO_65 is mapped to BT_EN pin on Hastings prime.
- AON and DIG on Hastings prime is powered from S11B
- RFA1 on hastings prime is powered from S1C
- RFA2 on hastings prime is powered from S12B
- Add bt_en_active in pinctrl so as to make BT_EN
pin controllable
- Hastings prime has got logical address changed
which acts as a slimbus slave. Change dedicated logical
address for HSP.
Change-Id: I7560770ba6829ba67c285b2be5d938ffffe839b7
Add regmaps for MMIO registers for QoS configurations and required
clocks to access certain QoS registers.
Change-Id: I28814e6a7b8808500005f3f785e7ee8a491189de
Flash LED driver provides support for the clients to turn ON/OFF LED
channels in different modes (flash/torch) individually or as a group.
Add the bindings necessary to describe it.
Change-Id: Id9eebbeaef5933477bc3dc5db8d674cab059e5d0
Add DT bindings for QTI battery charger which gets and sets
power supply properties by communicating with charger firmware
running on the remote subsystem (e.g. DSP) over PMIC Glink.
Change-Id: I8e3aedfb70c627807388db3c449c283f35ecfd59
The bootloaders are bypassing the SMMU for UFS already, and doing
the same from the kernel would be redundant. Hence, remove the
properties to bypass SMMU.
Change-Id: Ida9e7d68ffa9f97a3e6f07d974fa842ef794852f
