Commit graph

4,132 commits

Author SHA1 Message Date
qctecmdr
211568059d Merge "ARM: dts: msm: Correct the width of APSS TPDM" 2021-02-10 12:32:16 -08:00
qctecmdr
e4c6a0c29a Merge "ARM: dts: msm: Add configuration for vref regulator vote for YUPIK" 2021-02-10 12:32:16 -08:00
qctecmdr
0649455b46 Merge "ARM: dts: msm: Add dtsi entry for ssg hlos drivers" 2021-02-10 12:32:16 -08:00
qctecmdr
73c19edc3d Merge "ARM: dts: msm: Reorganize the apps_rsc and mxlvl node for sa8195" 2021-02-10 03:35:45 -08:00
qctecmdr
e8885e60e3 Merge "ARM: dts: msm: clean up display references for sa8155/sa8195" 2021-02-10 03:35:45 -08:00
qctecmdr
d17c3e197e Merge "ARM: dts: msm: Remove "msr-fix-req" label from some TPDMs" 2021-02-10 03:35:45 -08:00
qctecmdr
16b68ea3e7 Merge "ARM: dts: msm: Add PM8008 GPIO and regulators to scuba-iot" 2021-02-10 03:35:45 -08:00
qctecmdr
fb34fc1f02 Merge "ARM: dts: msm: Update dtsi entries for fastrpc context banks" 2021-02-10 03:35:45 -08:00
qctecmdr
a3ebc945eb Merge "ARM: dts: msm: include camera devicetree for sm8150" 2021-02-10 03:35:44 -08:00
qctecmdr
7c0022428d Merge "ARM: dts: msm: Add devicetree support for HSP (WCN6850)" 2021-02-10 03:35:44 -08:00
qctecmdr
6e21a1289c Merge "ARM: dts: msm: add se22 spi alias" 2021-02-10 03:35:44 -08:00
Tao,Zhang
96ca9ba281 ARM: dts: msm: Remove "msr-fix-req" label from some TPDMs
Need to remove "msr-fix-req" label from some TPDMs since it will
cause registers are not written properly.

Change-Id: I2bb9827675b7cefc83e7779cb641d14f6b3b3cd8
2021-02-10 13:36:20 +08:00
Shyam Kumar Thella
214842d3c1 ARM: dts: msm: Add PM8008 GPIO and regulators to scuba-iot
Add PM8008 GPIOs and regulators to scuba-iot devicetree.

Change-Id: Ic8d278e97aff99293fb1e753fd3486161eb7e387
2021-02-10 10:47:49 +05:30
NITHEESH MUTHURAJ
30c943f3d8 ARM: dts: msm: Add Additional speed bins for supported devices
Add new speed bins nodes to support new efuse values.

Change-Id: Idf5061579c5c3777859bd3a31aa2ee41e1e14faf
2021-02-09 20:40:48 -08:00
Veera Vegivada
ee4b39fbe5 ARM: dts: msm: Reorganize the apps_rsc and mxlvl node for sa8195
Move the 'apps_rsc' node to the beginning of the 'soc'
node such that the rpmh-regulator devices are populated
early in the boot process. As many consumers' probe depend
on these regulator devices, placing 'apps_rsc' at the beginning
would satisfy the consumer devices as soon as they are
populated later in the boot. This way, the drivers no longer
have to wait for the regulator devices to be populated, thus
optimizing the boot performance.

Change-Id: I8f760a8e3eb3c0e301e5866d83e828208743c183
2021-02-09 18:05:35 +05:30
Gopala Krishna Nuthaki
2d0a7922cb ARM: dts: msm: Add configuration for vref regulator vote for YUPIK
Add regulator configuration for vref regulators so that LMH driver can
place a active only vote for yupik.

Change-Id: I4b8645201526a2baa2bdc2167d6b464925f047fd
2021-02-09 03:27:17 -08:00
Govind Singh
0b06b23e9d ARM: dts: msm: Add devicetree support for HSP (WCN6850)
Add devicetree changes for supporting HSP card (WCN6850).

Change-Id: Ibeb7ccbe378338175e9f6027efc0a59b92d67c79
2021-02-09 02:01:01 -08:00
Santosh Dronamraju
936fdf4571 ARM: dts: msm: Add dtsi entry for ssg hlos drivers
The following changes are added:
    1. Add qseecom node for sdmshrike
    2. Enable QRNG driver for sdmshrike.
    3. Add shmbridge node for sdmshrike.
    4. Add smcinvoke node for sdmshrike.
    5. Add tz_log node for sdmshrike.

Change-Id: I1cb40f21fde0b52dba48bc342902f677d9dada46
2021-02-08 18:35:54 -08:00
Xiaowen Wu
5d324941fa ARM: dts: msm: clean up display references for sa8155/sa8195
Clean up display references for sa8155/sa8195 and fix missing node
when shd .dtsi is included.

Change-Id: Ib7a9a559faef4f40a1ebd5f918c4da190b646e61
2021-02-08 13:13:38 -08:00
Chennakesava Raju Eluru
2a73bb4ce4 ARM: dts: msm: Update dtsi entries for fastrpc context banks
Configure fastrpc context banks

Change-Id: I58e50b82e277f348335fbbd32a15e2878141f8b3
2021-02-08 17:58:51 +05:30
Fei Tong
a7459f9970 ARM: dts: msm: add se22 spi alias
Add se22 spi alias for audio codec spi node

Change-Id: Ie51451416c4db25008411e4a799166a423afb4dd
2021-02-08 17:01:39 +08:00
qctecmdr
1a65fb0285 Merge "ARM: dts: qcom: enable display on trusted vm for yupik" 2021-02-07 22:42:28 -08:00
qctecmdr
1e2b1a1c13 Merge "bindings: Add device-tree bindings for slatecom interface driver" 2021-02-07 22:42:28 -08:00
Govind Singh
f192710a3c ARM: dts: msm: Add pin control for HSP (WCN6850)
Add WLAN EN pin control to power on HSP (WCN6850) card.

Change-Id: I32352a0cc575ca5d3f16cf332085f7e948f3f77d
2021-02-07 20:56:13 -08:00
qctecmdr
0078e986af Merge "ARM: dts: msm: add support for CPUCP l3 scaling on yupik target" 2021-02-07 11:45:26 -08:00
qctecmdr
ff9df390fb Merge "ARM: dts: msm: Add 120fps display and touch support Yupik Amoled IDPS" 2021-02-07 11:45:25 -08:00
qctecmdr
7817eacad2 Merge "ARM: dts: msm: Enable charge pump on sdxlemur platforms" 2021-02-07 11:45:25 -08:00
qctecmdr
439a5f34bd Merge "ARM: dts: msm: Disable PMX65 VBUS_DET on sdxlemur MTP-MBB and RCM-RC boards" 2021-02-07 11:45:25 -08:00
Ritesh Kumar
c8195a6948 ARM: dts: msm: Enable touch for 120Hz panel on yupik idp
Enable touch for 120Hz Video mode panel on yupik idp
platform.

Change-Id: I31dcb9262b83184fcc6ddab72caaaa3773321c7b
2021-02-07 05:53:14 -08:00
qctecmdr
7e23a97e67 Merge "ARM: dts: msm: add PMIC devices for SA6150" 2021-02-06 22:12:47 -08:00
qctecmdr
6f34522a68 Merge "ARM: dts: msm: Add clocks needed for qos configuration" 2021-02-06 05:10:44 -08:00
qctecmdr
6f519facdc Merge "ARM: dts: msm: Add support for secure-level-shifter on sdxnightjar" 2021-02-06 05:10:44 -08:00
qctecmdr
344b2800ea Merge "ARM: dts: msm: correct name of etm0" 2021-02-06 05:10:44 -08:00
qctecmdr
c14bcba55e Merge "ARM: dts: msm: Correct ATID for tpda dlct" 2021-02-06 05:10:44 -08:00
qctecmdr
4754fa2521 Merge "ARM: dts: msm: Add L1 TLB node for holi" 2021-02-06 05:10:44 -08:00
qctecmdr
27d1644ecb Merge "ARM: dts: msm: add lxc overlay devicetree for Gen3 platform" 2021-02-06 05:10:44 -08:00
Andhavarapu Karthik
272672b969 ARM: dts: qcom: enable display on trusted vm for yupik
Enable display on trusted vm for yupik target by including
display dt files. Add entry to use non secure display heap
memory for TUI usecase for yupik target.

Change-Id: Iaf821ddf8017f1341e23bca3a8450f0797990b7a
2021-02-06 14:15:38 +05:30
Veera Vegivada
102d0e7ef4 ARM: dts: msm: add PMIC devices for SA6150
Add top level SPMI slave devices for PM6155.
Also add some of the peripheral devices within the SPMI slave devices.

Change-Id: Ia45d71820a70e7d244a94143a3358c7a5a98fe3b
2021-02-06 12:33:08 +05:30
Veera Vegivada
e156354839 ARM: dts: msm: Add UFS support for SA6155
Add UFS host controller and UFS PHY (attached to embedded UFS card)
for SA6155 platform.

Change-Id: Ic75617e3d8eb406f876cc71c8931bcfee545438d
2021-02-06 12:32:51 +05:30
Veera Vegivada
f2f54c2cf4 ARM: dts: msm: Enable L3 interconnect driver for SM6150
Enable L3 interconnect driver so that consumers are
able to obtain their path handles properly.

Change-Id: Ib1cf078b3929f3802c51dfcd17076bc6494b5d2e
2021-02-06 12:32:30 +05:30
Veera Vegivada
79f3a05147 ARM: dts: msm: add interconnect devices for sm6150
Add interconnect devices for sm6150. This will allow
consumers to get their path and set bandwidth constraints
on them.

Change-Id: I22a398c60f5d43fbc014abe9d04697bf01b9ccb7
2021-02-06 12:31:44 +05:30
qctecmdr
a224f6352e Merge "ARM: dts: msm: add pci DT nodes for PCIe switch for sdxlemur" 2021-02-05 18:01:27 -08:00
qctecmdr
afcc966997 Merge "ARM: dts: msm: Add display and touch support for Yupik Amoled IDP" 2021-02-05 18:01:27 -08:00
qctecmdr
af64425655 Merge "ARM: dts: msm: update dtsi for wlan pipes holb timeout" 2021-02-05 18:01:26 -08:00
Hemant Kumar
300aa4043c ARM: dts: msm: add pci DT nodes for PCIe switch for sdxlemur
If there is a switch connected to PCIe root complex, the
devicetree hierarchy needs to correctly reflect the physical
connection. Add pci DT nodes for each switch device such as
switch upstream and downstream ports.

Change-Id: Ic813867df68254b51ebdc365545058925fcff35d
2021-02-05 11:19:53 -08:00
Tao,Zhang
28a4416495 ARM: dts: msm: Correct the width of APSS TPDM
APSS TPDM use DSB 32 as data width, correct it for yupik.

Change-Id: Iaffa8a5806fd58014c7aefa0f5693fbdcf71d73d
2021-02-05 22:37:43 +08:00
Ravikanth Tuniki
88a47455ab ARM: dts: msm: Add 120fps display and touch support Yupik Amoled IDPS
This change adds display and touch support for r66451 dsc fhd plus 
120fps command mode panel on yupik.

Change-Id: If331abb695ef22103fdca51fa0a8a9dded69c6b5
2021-02-05 17:37:25 +05:30
qctecmdr
945498bf6c Merge "ARM: dts: msm: Add novatek touch node in yupik trusted VM" 2021-02-04 23:09:27 -08:00
qctecmdr
50b3f86e0b Merge "ARM: dts: msm: Add reserved memory for dfps data on yupik" 2021-02-04 23:09:27 -08:00
qctecmdr
dbab7560bb Merge "ARM: dts: msm: Add node for memory dump driver for SDMSHRIKE" 2021-02-04 23:09:27 -08:00