unmap memory before hyp unassign during adm close
for handset/speaker FNN usecase.
Change-Id: I1d4d335c5179e42af4dcf7cf8e82e48669b32830
Signed-off-by: Akhil Karuturi <akarutur@codeaurora.org>
Disable brown out protection (bop) attenuation levels 1,2 and 3
which causes fast and coarse transitions in gain during voltage drop.
This creates "pop" noise during the drop. Since battery current
limiting (bcl) feature is enabled with CPS, bop is redundant and
can be disabled.
Change-Id: I51617333203ba14784e2338d91a96082c55e1331
Signed-off-by: Vignesh Kulothungan <vigneshk@codeaurora.org>
PA_ERR can happen during speaker path setup. Log the
error status in the interrupt handler and clear the error
status for next audio playback to resume properly on
the speaker.
Change-Id: I5800d9505a3036127097745aaa880b73b3e87f30
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
During SSR up event handler, if soundwire state is
already up or auto suspend jiffies is not completed,
ensure put in suspend/SSR state.
Change-Id: I853f42d125eb5a60e3f1f065a60516877e3a463c
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
LV Platform use the same LVGVM cause Kbuild mismatch issue
Change-Id: Iad092ebcbd991e52daedb87406920055528e3a1c
Signed-off-by: Hongtao Peng <hongtaop@codeaurora.org>
Add range check for ucontrol value to avoid array
overflow.
Change-Id: I7b699519bec6f605e5ca5ece8f67badbefc7a094
Signed-off-by: Meng Wang <mengw@codeaurora.org>
* Add additional proxy port frontend and pcm backend to support dual proxy port
* Add channel configuration mixer control for second proxy port
Change-Id: Iba7e21f17122926d27acc58be653351b4d0ea37a
Signed-off-by: Alexy Joseph <alexyj@codeaurora.org>
Signed-off-by: Tahir Dawson <dawson@codeaurora.org>
VoLTE in power mode doesn't support to configure bit-width of
AFE port with 24bit.
Fix it by use default bit-width when start VoLTE in power mode.
Change-Id: Ic429ea317c71c9a4436705663185fc69cb885166
Signed-off-by: Kunlei Zhang <kunleiz@codeaurora.org>
add retry logic to ensure adsp is up before registering custom
topologies
Change-Id: Ib88c06ae8c64cd0784319f40e3746ccbbce0cdf7
Signed-off-by: Akhil Karuturi <akarutur@codeaurora.org>
Update the typo to fix failure in afe_get_port_idx during RX usecase.
Change-Id: I2026cbce0165e6f5e4059945183a09feaee89b45
Signed-off-by: Nirav Khatri <khatri@codeaurora.org>
Add change to properly handle the pointers by setting them to
NULL after free and adding some null checks before dereferencing.
Change-Id: Ic2f3ef5631d0f4e4191bf772eb0b3f0b825044a6
Add count check before enabling/disabling regulator for swr
haptics. This is to ensure that count dosent get mismatched.
Change-Id: I73bb9f8ef459eea4327b9db09c430e8c2ec87adb
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
When SSR happens, set substream state to SNDRV_PCM_STATE_DISCONNECTED
to avoid userspace keeping waiting for substream state and causing
deadlock.
Change-Id: Iaa4d76101204652742c55d13da5c770c418a16bc
Signed-off-by: Meng Wang <mengw@codeaurora.org>
Remove static definitions of rx swr slave physical addresses.
Add support to read swr slave physical addresses from device
tree and store it within respective master data structure.
Revert addition of slave device address for wcd937x in soundwire
master.
Change-Id: I0eb2597b8e40a54d476cd2662bbe4f2008af899a
Signed-off-by: Vignesh Kulothungan <vigneshk@codeaurora.org>
Auto suspend timer for core vote is triggering before read write complete.
Move the auto suspend of core vote to post read write operation.
Change-Id: Ib0f6b026fe0e7fd3fbe052691db492915e436a78
Signed-off-by: Vangala, Amarnath <avangala@codeaurora.org>
Enable interrupt request only when the interrupt is
in disabled state.
Change-Id: I67795bf0ee344661e02b0fec3181cd7980d56652
Signed-off-by: Vignesh Kulothungan <vigneshk@codeaurora.org>
Underflow is observed sometimes with CPS spkr prot enabled.
Reduce no of retry count for wsa to 1 so as to optimize delay
between reads on wsa and prevent underflow.
Change-Id: I505fcf349b45bd6f2374e5cfee83473f032e4ad7
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
