This allows userspace to completely setup a loop device with a single
ioctl, removing the in-between state where the device can be partially
configured - eg the loop device has a backing file associated with it,
but is reading from the wrong offset.
Besides removing the intermediate state, another big benefit of this
ioctl is that LOOP_SET_STATUS can be slow; the main reason for this
slowness is that LOOP_SET_STATUS(64) calls blk_mq_freeze_queue() to
freeze the associated queue; this requires waiting for RCU
synchronization, which I've measured can take about 15-20ms on this
device on average.
In addition to doing what LOOP_SET_STATUS can do, LOOP_CONFIGURE can
also be used to:
- Set the correct block size immediately by setting
loop_config.block_size (avoids LOOP_SET_BLOCK_SIZE)
- Explicitly request direct I/O mode by setting LO_FLAGS_DIRECT_IO
in loop_config.info.lo_flags (avoids LOOP_SET_DIRECT_IO)
- Explicitly request read-only mode by setting LO_FLAGS_READ_ONLY
in loop_config.info.lo_flags
Here's setting up ~70 regular loop devices with an offset on an x86
Android device, using LOOP_SET_FD and LOOP_SET_STATUS:
vsoc_x86:/system/apex # time for i in `seq 30 100`;
do losetup -r -o 4096 /dev/block/loop$i com.android.adbd.apex; done
0m03.40s real 0m00.02s user 0m00.03s system
Here's configuring ~70 devices in the same way, but using a modified
losetup that uses the new LOOP_CONFIGURE ioctl:
vsoc_x86:/system/apex # time for i in `seq 30 100`;
do losetup -r -o 4096 /dev/block/loop$i com.android.adbd.apex; done
0m01.94s real 0m00.01s user 0m00.01s system
Signed-off-by: Martijn Coenen <maco@android.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
(cherry picked from commit 3448914e8cc550ba792d4ccc74471d1ca4293aae)
Bug: 148607611
Change-Id: Ia235e6ca600a8080b58ca0bb2442542ecd23f95d
LOOP_SET_STATUS(64) will actually allow some lo_flags to be modified; in
particular, LO_FLAGS_AUTOCLEAR can be set and cleared, whereas
LO_FLAGS_PARTSCAN can be set to request a partition scan. Make this
explicit by updating the UAPI to include the flags that can be
set/cleared using this ioctl.
The implementation can then blindly take over the passed in flags,
and use the previous flags for those flags that can't be set / cleared
using LOOP_SET_STATUS.
Signed-off-by: Martijn Coenen <maco@android.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
(cherry picked from commit faf1d25440d6ad06d509dada4b6fe62fea844370)
Bug: 148607611
Change-Id: I614a6d583970b65fbcfb0df2e4bb2d4b8471acd3
In preparation for a new ioctl that needs to copy_from_user(); makes the
code easier to read as well.
Signed-off-by: Martijn Coenen <maco@android.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
(cherry picked from commit 571fae6e290d64a3e8132c455e7786c99c467ed1)
Bug: 148607611
Change-Id: I59d35bf8cc7af42c3a2957ecd5d0163382d08453
So we can use it without forward declaration. This is a separate commit
to make it easier to verify that this is just a move, without functional
modifications.
Signed-off-by: Martijn Coenen <maco@android.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
(cherry picked from commit 62ab466ca881fe200c21aa74b65f8bd83ec482dc)
Bug: 148607611
Change-Id: I112dd7d36917be5454759296706c57c7a1f697a6
Factor out this code into a separate function, so it can be reused by
other code more easily.
Signed-off-by: Martijn Coenen <maco@android.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
(cherry picked from commit 0c3796c244598122a5d59d56f30d19390096817f)
Bug: 148607611
Change-Id: I58343d283b38da77d14d9cb61003947021ba5633
This function was now only used by loop_set_capacity(). Just open code
the remaining code in the caller instead.
Signed-off-by: Martijn Coenen <maco@android.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
(cherry picked from commit 0a6ed1b5ff6757f11ad2d57906ceb40488a5ee52)
Bug: 148607611
Change-Id: Ib87a3f9fa260b2f1f84adbe4ae2151cfbf2e0fae
figure_loop_size() calculates the loop size based on the passed in
parameters, but at the same time it updates the offset and sizelimit
parameters in the loop device configuration. That is a somewhat
unexpected side effect of a function with this name, and it is only only
needed by one of the two callers of this function - loop_set_status().
Move the lo_offset and lo_sizelimit assignment back into loop_set_status(),
and use the newly factored out functions to validate and apply the newly
calculated size. This allows us to get rid of figure_loop_size() in a
follow-up commit.
Signed-off-by: Martijn Coenen <maco@android.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
(cherry picked from commit b0bd158dd630bd47640e0e418c062cda1e0da5ad)
Bug: 148607611
Change-Id: I9a7fd5789648b75338d29aae4238ff048403a6aa
sector_t is now always u64, so we don't need to check for truncation.
Signed-off-by: Martijn Coenen <maco@android.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
(cherry picked from commit 083a6a50783ef54256eec3499e6575237e0e3d53)
Bug: 148607611
Change-Id: Id8e4ce3f1a7e05f038791e41394715397a65f8b4
loop_set_status() calls loop_config_discard() to configure discard for
the loop device; however, the discard configuration depends on whether
the loop device uses encryption, and when we call it the encryption
configuration has not been updated yet. Move the call down so we apply
the correct discard configuration based on the new configuration.
Signed-off-by: Martijn Coenen <maco@android.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bob Liu <bob.liu@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
(cherry picked from commit 7c5014b0987a30e4989c90633c198aced454c0ec)
Bug: 148607611
Change-Id: I622115f8887f9730339468bb0b90c4b13ea15038
This reverts commit 0d5d9413a6 as it
breaks ramdump debug tools. Will bring this back in after resolving
those issues.
Bug: 163100336
Signed-off-by: Saravana Kannan <saravanak@google.com>
Change-Id: Ic64214c63ecd6347f5707cc7354e6969d3af0320
This reverts commit 314ac273f0 as it
breaks ramdump debug tools. Will bring this back in after resolving
those issues.
Bug: 163100336
Signed-off-by: Saravana Kannan <saravanak@google.com>
Change-Id: Ibf46f6db0fa2bf9cc9e7121115889e15ca07cdab
In RPMSG GLINK the chrdev device will allocate an ept as part of the
rpdev creation. This device will not register endpoint ops even though
it has an allocated ept. Protect against the case where the device is
being destroyed.
Bug: 163076767
Link: https://lore.kernel.org/lkml/1593017121-7953-3-git-send-email-deesin@codeaurora.org/
Change-Id: I66d9f893c3d4ed97489cba3791d540301408f0ee
Signed-off-by: Chris Lew <clew@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
-----BEGIN PGP SIGNATURE-----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=xcgc
-----END PGP SIGNATURE-----
Merge 5.4.57 into android11-5.4
Changes in 5.4.57
random32: update the net random state on interrupt and activity
ARM: percpu.h: fix build error
random: fix circular include dependency on arm64 after addition of percpu.h
random32: remove net_rand_state from the latent entropy gcc plugin
random32: move the pseudo-random 32-bit definitions to prandom.h
arm64: Workaround circular dependency in pointer_auth.h
ext4: fix direct I/O read error
selftests: bpf: Fix detach from sockmap tests
bpf: sockmap: Require attach_bpf_fd when detaching a program
Linux 5.4.57
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I3f51a779843eb1bc50ac6dc7fd9c3db66b2aea7f
commit bb0de3131f4c60a9bf976681e0fe4d1e55c7a821 upstream.
The sockmap code currently ignores the value of attach_bpf_fd when
detaching a program. This is contrary to the usual behaviour of
checking that attach_bpf_fd represents the currently attached
program.
Ensure that attach_bpf_fd is indeed the currently attached
program. It turns out that all sockmap selftests already do this,
which indicates that this is unlikely to cause breakage.
Fixes: 604326b41a ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200629095630.7933-5-lmb@cloudflare.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f43cb0d672aa8eb09bfdb779de5900c040487d1d upstream.
Fix sockmap tests which rely on old bpf_prog_dispatch behaviour.
In the first case, the tests check that detaching without giving
a program succeeds. Since these are not the desired semantics,
invert the condition. In the second case, the clean up code doesn't
supply the necessary program fds.
Fixes: bb0de3131f4c ("bpf: sockmap: Require attach_bpf_fd when detaching a program")
Reported-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20200709115151.75829-1-lmb@cloudflare.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch is used to fix ext4 direct I/O read error when
the read size is not aligned with block size.
Then, I will use a test to explain the error.
(1) Make a file that is not aligned with block size:
$dd if=/dev/zero of=./test.jar bs=1000 count=3
(2) I wrote a source file named "direct_io_read_file.c" as following:
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <sys/file.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <string.h>
#define BUF_SIZE 1024
int main()
{
int fd;
int ret;
unsigned char *buf;
ret = posix_memalign((void **)&buf, 512, BUF_SIZE);
if (ret) {
perror("posix_memalign failed");
exit(1);
}
fd = open("./test.jar", O_RDONLY | O_DIRECT, 0755);
if (fd < 0){
perror("open ./test.jar failed");
exit(1);
}
do {
ret = read(fd, buf, BUF_SIZE);
printf("ret=%d\n",ret);
if (ret < 0) {
perror("write test.jar failed");
}
} while (ret > 0);
free(buf);
close(fd);
}
(3) Compile the source file:
$gcc direct_io_read_file.c -D_GNU_SOURCE
(4) Run the test program:
$./a.out
The result is as following:
ret=1024
ret=1024
ret=952
ret=-1
write test.jar failed: Invalid argument.
I have tested this program on XFS filesystem, XFS does not have
this problem, because XFS use iomap_dio_rw() to do direct I/O
read. And the comparing between read offset and file size is done
in iomap_dio_rw(), the code is as following:
if (pos < size) {
retval = filemap_write_and_wait_range(mapping, pos,
pos + iov_length(iov, nr_segs) - 1);
if (!retval) {
retval = mapping->a_ops->direct_IO(READ, iocb,
iov, pos, nr_segs);
}
...
}
...only when "pos < size", direct I/O can be done, or 0 will be return.
I have tested the fix patch on Ext4, it is up to the mustard of
EINVAL in man2(read) as following:
#include <unistd.h>
ssize_t read(int fd, void *buf, size_t count);
EINVAL
fd is attached to an object which is unsuitable for reading;
or the file was opened with the O_DIRECT flag, and either the
address specified in buf, the value specified in count, or the
current file offset is not suitably aligned.
So I think this patch can be applied to fix ext4 direct I/O error.
However Ext4 introduces direct I/O read using iomap infrastructure
on kernel 5.5, the patch is commit <b1b4705d54ab>
("ext4: introduce direct I/O read using iomap infrastructure"),
then Ext4 will be the same as XFS, they all use iomap_dio_rw() to do direct
I/O read. So this problem does not exist on kernel 5.5 for Ext4.
>From above description, we can see this problem exists on all the kernel
versions between kernel 3.14 and kernel 5.4. It will cause the Applications
to fail to read. For example, when the search service downloads a new full
index file, the search engine is loading the previous index file and is
processing the search request, it can not use buffer io that may squeeze
the previous index file in use from pagecache, so the serch service must
use direct I/O read.
Please apply this patch on these kernel versions, or please use the method
on kernel 5.5 to fix this problem.
Fixes: 9fe55eea7e ("Fix race when checking i_size on direct i/o read")
Reviewed-by: Jan Kara <jack@suse.cz>
Co-developed-by: Wang Long <wanglong19@meituan.com>
Signed-off-by: Wang Long <wanglong19@meituan.com>
Signed-off-by: Jiang Ying <jiangying8582@126.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With the backport of f227e3ec3b5c ("random32: update the net random
state on interrupt and activity") and its associated fixes, the
arm64 build explodes early:
In file included from ../include/linux/smp.h:67,
from ../include/linux/percpu.h:7,
from ../include/linux/prandom.h:12,
from ../include/linux/random.h:118,
from ../arch/arm64/include/asm/pointer_auth.h:6,
from ../arch/arm64/include/asm/processor.h:39,
from ../include/linux/mutex.h:19,
from ../include/linux/kernfs.h:12,
from ../include/linux/sysfs.h:16,
from ../include/linux/kobject.h:20,
from ../include/linux/of.h:17,
from ../include/linux/irqdomain.h:35,
from ../include/linux/acpi.h:13,
from ../include/acpi/apei.h:9,
from ../include/acpi/ghes.h:5,
from ../include/linux/arm_sdei.h:8,
from ../arch/arm64/kernel/asm-offsets.c:10:
../arch/arm64/include/asm/smp.h💯29: error: field ‘ptrauth_key’ has
incomplete type
This is due to struct ptrauth_keys_kernel not being defined before
we transitively include asm/smp.h from linux/random.h.
Paper over it by moving the inclusion of linux/random.h *after* the
type has been defined.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c0842fbc1b18c7a044e6ff3e8fa78bfa822c7d1a upstream.
The addition of percpu.h to the list of includes in random.h revealed
some circular dependencies on arm64 and possibly other platforms. This
include was added solely for the pseudo-random definitions, which have
nothing to do with the rest of the definitions in this file but are
still there for legacy reasons.
This patch moves the pseudo-random parts to linux/prandom.h and the
percpu.h include with it, which is now guarded by _LINUX_PRANDOM_H and
protected against recursive inclusion.
A further cleanup step would be to remove this from <linux/random.h>
entirely, and make people who use the prandom infrastructure include
just the new header file. That's a bit of a churn patch, but grepping
for "prandom_" and "next_pseudo_random32" "struct rnd_state" should
catch most users.
But it turns out that that nice cleanup step is fairly painful, because
a _lot_ of code currently seems to depend on the implicit include of
<linux/random.h>, which can currently come in a lot of ways, including
such fairly core headfers as <linux/net.h>.
So the "nice cleanup" part may or may never happen.
Fixes: 1c9df907da83 ("random: fix circular include dependency on arm64 after addition of percpu.h")
Tested-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 83bdc7275e6206f560d247be856bceba3e1ed8f2 upstream.
It turns out that the plugin right now ends up being really unhappy
about the change from 'static' to 'extern' storage that happened in
commit f227e3ec3b5c ("random32: update the net random state on interrupt
and activity").
This is probably a trivial fix for the latent_entropy plugin, but for
now, just remove net_rand_state from the list of things the plugin
worries about.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Emese Revfy <re.emese@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1c9df907da83812e4f33b59d3d142c864d9da57f upstream.
Daniel Díaz and Kees Cook independently reported that commit
f227e3ec3b5c ("random32: update the net random state on interrupt and
activity") broke arm64 due to a circular dependency on include files
since the addition of percpu.h in random.h.
The correct fix would definitely be to move all the prandom32 stuff out
of random.h but for backporting, a smaller solution is preferred.
This one replaces linux/percpu.h with asm/percpu.h, and this fixes the
problem on x86_64, arm64, arm, and mips. Note that moving percpu.h
around didn't change anything and that removing it entirely broke
differently. When backporting, such options might still be considered
if this patch fails to help.
[ It turns out that an alternate fix seems to be to just remove the
troublesome <asm/pointer_auth.h> remove from the arm64 <asm/smp.h>
that causes the circular dependency.
But we might as well do the whole belt-and-suspenders thing, and
minimize inclusion in <linux/random.h> too. Either will fix the
problem, and both are good changes. - Linus ]
Reported-by: Daniel Díaz <daniel.diaz@linaro.org>
Reported-by: Kees Cook <keescook@chromium.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Fixes: f227e3ec3b5c
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit aa54ea903abb02303bf55855fb51e3fcee135d70 upstream.
Fix build error for the case:
defined(CONFIG_SMP) && !defined(CONFIG_CPU_V6)
config: keystone_defconfig
CC arch/arm/kernel/signal.o
In file included from ../include/linux/random.h:14,
from ../arch/arm/kernel/signal.c:8:
../arch/arm/include/asm/percpu.h: In function ‘__my_cpu_offset’:
../arch/arm/include/asm/percpu.h:29:34: error: ‘current_stack_pointer’ undeclared (first use in this function); did you mean ‘user_stack_pointer’?
: "Q" (*(const unsigned long *)current_stack_pointer));
^~~~~~~~~~~~~~~~~~~~~
user_stack_pointer
Fixes: f227e3ec3b5c ("random32: update the net random state on interrupt and activity")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f227e3ec3b5cad859ad15666874405e8c1bbc1d4 upstream.
This modifies the first 32 bits out of the 128 bits of a random CPU's
net_rand_state on interrupt or CPU activity to complicate remote
observations that could lead to guessing the network RNG's internal
state.
Note that depending on some network devices' interrupt rate moderation
or binding, this re-seeding might happen on every packet or even almost
never.
In addition, with NOHZ some CPUs might not even get timer interrupts,
leaving their local state rarely updated, while they are running
networked processes making use of the random state. For this reason, we
also perform this update in update_process_times() in order to at least
update the state when there is user or system activity, since it's the
only case we care about.
Reported-by: Amit Klein <aksecurity@gmail.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Eric Dumazet <edumazet@google.com>
Cc: "Jason A. Donenfeld" <Jason@zx2c4.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Leaf changes summary: 642 artifacts changed (2214 filtered out)
Changed leaf types summary: 1 leaf type changed
Removed/Changed/Added functions summary: 0 Removed, 632 Changed (2201 filtered out), 0 Added function
Removed/Changed/Added variables summary: 0 Removed, 9 Changed (13 filtered out), 0 Added variable
632 functions with some sub-type change:
... lots of CRC changes ...
'struct device_link at device.h:1139:1' changed:
type size changed from 704 to 7808 (in bits)
1 data member insertion:
'device device_link::link_dev', at offset 384 (in bits) at device.h:1366:1
there are data member changes:
'device_link_state device_link::status' offset changed from 384 to 7488 (in bits) (by +7104 bits)
'u32 device_link::flags' offset changed from 416 to 7520 (in bits) (by +7104 bits)
'refcount_t device_link::rpm_active' offset changed from 448 to 7552 (in bits) (by +7104 bits)
'kref device_link::kref' offset changed from 480 to 7584 (in bits) (by +7104 bits)
'callback_head device_link::callback_head' offset changed from 512 to 7616 (in bits) (by +7104 bits)
'bool device_link::supplier_preactivated' offset changed from 640 to 7744 (in bits) (by +7104 bits)
2 impacted interfaces
Bug: 163090256
Bug: 157691602
Change-Id: Ia4d75e7d43fb546a88e682c3c66aac0bd47304fc
Signed-off-by: Saravana Kannan <saravanak@google.com>
Add support for pinctrl-0 through pinctrl-8 explicitly instead of trying
to add support for pinctrl-%d properties.
Of all the pinctrl-* properties in dts files (20322), only 47% (9531)
are pinctrl-%d properties. Of all the pinctrl-%d properties, 99.5%
(9486) are made up of pinctrl-[0-2]. 'pinctrl-8' is the current maximum
found in dts files.
Trying to parse all pinctrl-* properties and checking for pinctrl-%d is
unnecessarily complicated. So, just add support for pinctrl-[0-8] for
now. In the unlikely event we ever exceed pinctrl-8, we can come back
and improve this.
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20200724234415.1651639-2-saravanak@google.com
Signed-off-by: Rob Herring <robh@kernel.org>
(cherry picked from commit fb820b494acb70e3a20e50935118239c7e5c94dd)
Signed-off-by: Saravana Kannan <saravanak@google.com>
Bug: 163091301
Change-Id: I1ad8ba1b784a59a4230ac04331139c13da5d32ed
Add support for creating device links out of more DT properties.
Cc: MyungJoo Ham <myungjoo.ham@samsung.com>
Cc: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Rob Herring <robh@kernel.org>
(cherry picked from commit 78056e701c61132d15e0942e415926a6393fcf17)
Signed-off-by: Saravana Kannan <saravanak@google.com>
Bug: 163091301
Change-Id: Ifbf40d33788e59003a80c918098b08e94257d350
The devlink device name is of the form "supplier:consumer". But ":" is
fairly common in device names and makes it visually hard to distinguish
supplier and consumer. So, replace it with "--" to make it easier.
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20200724180523.1393383-1-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit 90b109d50da09ddaa179732c01ccba7f759c125d)
Signed-off-by: Saravana Kannan <saravanak@google.com>
Bug: 163090256
Change-Id: Ibda7db293de6c2e0d9f963e61f2cec0321c82e09
Marek and Guenter reported that commit 287905e68dd2 ("driver core:
Expose device link details in sysfs") caused sleeping/scheduling while
atomic warnings.
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:935
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 12, name: kworker/0:1
2 locks held by kworker/0:1/12:
#0: ee8074a8 ((wq_completion)rcu_gp){+.+.}-{0:0}, at: process_one_work+0x174/0x7dc
#1: ee921f20 ((work_completion)(&sdp->work)){+.+.}-{0:0}, at: process_one_work+0x174/0x7dc
Preemption disabled at:
[<c01b10f0>] srcu_invoke_callbacks+0xc0/0x154
----- 8< ----- SNIP
[<c064590c>] (device_del) from [<c0645c9c>] (device_unregister+0x24/0x64)
[<c0645c9c>] (device_unregister) from [<c01b10fc>] (srcu_invoke_callbacks+0xcc/0x154)
[<c01b10fc>] (srcu_invoke_callbacks) from [<c01493c4>] (process_one_work+0x234/0x7dc)
[<c01493c4>] (process_one_work) from [<c01499b0>] (worker_thread+0x44/0x51c)
[<c01499b0>] (worker_thread) from [<c0150bf4>] (kthread+0x158/0x1a0)
[<c0150bf4>] (kthread) from [<c0100114>] (ret_from_fork+0x14/0x20)
Exception stack(0xee921fb0 to 0xee921ff8)
This was caused by the device link device being released in the context
of srcu_invoke_callbacks(). There is no need to wait till the RCU
callback to release the device link device. So release the device
earlier and move the call_srcu() into the device release code. That way,
the memory will get freed only after the device is released AND the RCU
callback is called.
Fixes: 287905e68dd2 ("driver core: Expose device link details in sysfs")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20200716214523.2924704-1-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit 843e600b8a2b01463c4d873a90b2c2ea8033f1f6)
Signed-off-by: Saravana Kannan <saravanak@google.com>
Bug: 163090256
Change-Id: I3381dcf475ff55ee5971a57968f847eeef36e05b
This would be useful to check if a device is not probing because it's
waiting for a supplier to be added and then linked to before it can
probe.
To reduce sysfs clutter, this file is added only if it can ever be 1.
So, if fw_devlink is disabled or set to permissive, this file is not
added. Also, this file is removed once the device probes as it's no
longer relevant.
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20200521191800.136035-4-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit da6d647598a6d182eb6a0344a7b14ae005244399)
[Conflicts due to missing fw_devlink_is_permissive() and fw_devlink_flags]
Signed-off-by: Saravana Kannan <saravanak@google.com>
Bug: 163090256
Change-Id: Ief4b9e35aff600f2eb88d15839e98a610f1c252f
This can be used to check if a device supports sync_state() callbacks
and therefore keeps resources left on by the bootloader enabled till all
its consumers have probed.
This can also be used to check if sync_state() has been called for a
device or whether it is still trying to keep resources enabled because
they were left enabled by the bootloader and all its consumers haven't
probed yet.
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20200521191800.136035-3-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit 8fd456ec0cf03875908d6b67c1cd20cf0a7b4474)
Signed-off-by: Saravana Kannan <saravanak@google.com>
Bug: 163090256
Change-Id: I15b6db469e545eed9ecc97aca02ea90e7d318f2c
It's helpful to be able to look at device link details from sysfs. So,
expose it in sysfs.
Say device-A is supplier of device-B. These are the additional files
this patch would create:
/sys/class/devlink/device-A:device-B/
auto_remove_on
consumer/ -> .../device-B/
runtime_pm
status
supplier/ -> .../device-A/
sync_state_only
/sys/devices/.../device-A/
consumer:device-B/ -> /sys/class/devlink/device-A:device-B/
/sys/devices/.../device-B/
supplier:device-A/ -> /sys/class/devlink/device-A:device-B/
That way:
To get a list of all the device link in the system:
ls /sys/class/devlink/
To get the consumer names and links of a device:
ls -d /sys/devices/.../device-X/consumer:*
To get the supplier names and links of a device:
ls -d /sys/devices/.../device-X/supplier:*
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20200521191800.136035-2-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit 287905e68dd29873bcb7986a8290cd1e4cfde600)
Signed-off-by: Saravana Kannan <saravanak@google.com>
Bug: 163090256
Change-Id: I41dafdd731b8d429b5a21fd2e8d4d396b2bb571e
With the earlier patch in this series, all devices that deferred probe
due to fw_devlink_pause() will have their probes delayed till the
deferred probe thread is kicked off during late_initcall. This will also
affect all their consumers.
This delayed probing in unnecessary. So this patch just keeps track of
the devices that had their probe deferred due to fw_devlink_pause() and
attempts to probe them once during fw_devlink_resume().
Fixes: 716a7a259690 ("driver core: fw_devlink: Add support for batching fwnode parsing")
Signed-off-by: Saravana Kannan <saravanak@google.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20200701194259.3337652-4-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit 2451e746478a6a6e981cfa66b62b791ca93b90c8)
Signed-off-by: Saravana Kannan <saravanak@google.com>
Bug: 157691602
Change-Id: I76205ec0851fa251da5df485b1503b65b3296c7c
The defer_sync field is used as a hook to add the device to the
deferred_sync list. Rename it so that it's more meaningful for the next
patch that'll also use this field as a hook to a deferred_fw_devlink
list.
Signed-off-by: Saravana Kannan <saravanak@google.com>
Reviewed-by: Rafael J. Wysocki <rafael@kernel.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20200701194259.3337652-3-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit ec7bd78498f29680f536451fbdf9464e851273ed)
Signed-off-by: Saravana Kannan <saravanak@google.com>
Bug: 157691602
Change-Id: Ia213a9b8b6efc33882f5b2cfaad284ee0eca8cd4
The current deferred probe implementation can mess up suspend/resume
ordering if deferred probe thread is kicked off in parallel with the
main initcall thread (kernel_init thread) [1].
For example:
Say device-B is a consumer of device-A.
Initcall thread Deferred probe thread
=============== =====================
1. device-A is added.
2. device-B is added.
3. dpm_list is now [device-A, device-B].
4. driver-A defers probe of device-A.
5. device-A is moved to
end of dpm_list
6. dpm_list is now
[device-B, device-A]
7. driver-B is registereed and probes device-B.
8. dpm_list stays as [device-B, device-A].
The reverse order of dpm_list is used for suspend. So in this case
device-A would incorrectly get suspended before device-B.
Commit 716a7a259690 ("driver core: fw_devlink: Add support for batching
fwnode parsing") kicked off the deferred probe thread early during boot
to run in parallel with the initcall thread and caused suspend/resume
regressions. This patch removes the parallel run of the deferred probe
thread to avoid the suspend/resume regressions.
[1] - https://lore.kernel.org/lkml/CAGETcx8W96KAw-d_siTX4qHB_-7ddk0miYRDQeHE6E0_8qx-6Q@mail.gmail.com/
Fixes: 716a7a259690 ("driver core: fw_devlink: Add support for batching fwnode parsing")
Signed-off-by: Saravana Kannan <saravanak@google.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20200701194259.3337652-2-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit cec72f3efc6272420c2c2c699607f03d09b93e41)
Signed-off-by: Saravana Kannan <saravanak@google.com>
Bug: 157691602
Change-Id: I13f61a7cbeb705eb6ca1c67b07df5a9b69045029
When loading a module, module_frob_arch_sections() tries to figure out
the number of PLTs that'll be needed to handle all the RELAs. While
doing this, it tries to dedupe PLT allocations for multiple
R_AARCH64_CALL26 relocations to the same symbol. It does the same for
R_AARCH64_JUMP26 relocations.
To make checks for duplicates easier/faster, it sorts the relocation
list by type, symbol and addend. That way, to check for a duplicate
relocation, it just needs to compare with the previous entry.
However, sorting the entire relocation array is unnecessary and
expensive (O(n log n)) because there are a lot of other relocation types
that don't need deduping or can't be deduped.
So this commit partitions the array into entries that need deduping and
those that don't. And then sorts just the part that needs deduping. And
when CONFIG_RANDOMIZE_BASE is disabled, the sorting is skipped entirely
because PLTs are not allocated for R_AARCH64_CALL26 and R_AARCH64_JUMP26
if it's disabled.
This gives significant reduction in module load time for modules with
large number of relocations with no measurable impact on modules with a
small number of relocations. In my test setup with CONFIG_RANDOMIZE_BASE
enabled, these were the results for a few downstream modules:
Module Size (MB)
wlan 14
video codec 3.8
drm 1.8
IPA 2.5
audio 1.2
gpu 1.8
Without this patch:
Module Number of entries sorted Module load time (ms)
wlan 243739 283
video codec 74029 138
drm 53837 67
IPA 42800 90
audio 21326 27
gpu 20967 32
Total time to load all these module: 637 ms
With this patch:
Module Number of entries sorted Module load time (ms)
wlan 22454 61
video codec 10150 47
drm 13014 40
IPA 8097 63
audio 4606 16
gpu 6527 20
Total time to load all these modules: 247
Time saved during boot for just these 6 modules: 390 ms
Signed-off-by: Saravana Kannan <saravanak@google.com>
Acked-by: Will Deacon <will@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Link: https://lore.kernel.org/r/20200623011803.91232-1-saravanak@google.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
(cherry picked from commit d4e0340919fb9190a57e879fb3125c4acce0d9b2)
Signed-off-by: Saravana Kannan <saravanak@google.com>
Bug: 159681305
Change-Id: I6660f6e5d5e950340445f388d047c306fb0dfe6d
Commit 05d18ae1cc8a ("scsi: pm: Balance pm_only counter of request queue
during system resume") fixed a problem in the block layer's runtime-PM
code: blk_set_runtime_active() failed to call blk_clear_pm_only().
However, the commit's implementation was awkward; it forced the SCSI
system-resume handler to choose whether to call blk_post_runtime_resume()
or blk_set_runtime_active(), depending on whether or not the SCSI device
had previously been runtime suspended.
This patch simplifies the situation considerably by adding the missing
function call directly into blk_set_runtime_active() (under the condition
that the queue is not already in the RPM_ACTIVE state). This allows the
SCSI routine to revert back to its original form. Furthermore, making this
change reveals that blk_post_runtime_resume() (in its success pathway) does
exactly the same thing as blk_set_runtime_active(). The duplicate code is
easily removed by making one routine call the other.
No functional changes are intended.
Link: https://lore.kernel.org/r/20200706151436.GA702867@rowland.harvard.edu
CC: Can Guo <cang@codeaurora.org>
CC: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bug: 162892567
(cherry picked from commit 8f38f8e0a30e1c33cdfc48eba2bd63ac2eae373a
https://git.kernel.org/pub/scm/linux/kernel/git/mkp/scsi.git 5.9/scsi-queue)
Change-Id: Ibeca9786fb65ee7d782314f48fb39274b82feb57
Signed-off-by: Can Guo <cang@codeaurora.org>
-----BEGIN PGP SIGNATURE-----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=A5pn
-----END PGP SIGNATURE-----
Merge 5.4.56 into android11-5.4
Changes in 5.4.56
crypto: ccp - Release all allocated memory if sha type is invalid
media: rc: prevent memory leak in cx23888_ir_probe
sunrpc: check that domain table is empty at module unload.
ath10k: enable transmit data ack RSSI for QCA9884
PCI/ASPM: Disable ASPM on ASMedia ASM1083/1085 PCIe-to-PCI bridge
mm/filemap.c: don't bother dropping mmap_sem for zero size readahead
ALSA: usb-audio: Add implicit feedback quirk for SSL2
ALSA: hda/realtek: enable headset mic of ASUS ROG Zephyrus G15(GA502) series with ALC289
ALSA: hda/realtek: typo_fix: enable headset mic of ASUS ROG Zephyrus G14(GA401) series with ALC289
ALSA: hda/realtek: Fix add a "ultra_low_power" function for intel reference board (alc256)
ALSA: hda/realtek - Fixed HP right speaker no sound
ALSA: hda/hdmi: Fix keep_power assignment for non-component devices
IB/rdmavt: Fix RQ counting issues causing use of an invalid RWQE
vhost/scsi: fix up req type endian-ness
9p/trans_fd: Fix concurrency del of req_list in p9_fd_cancelled/p9_read_work
wireless: Use offsetof instead of custom macro.
ARM: 8986/1: hw_breakpoint: Don't invoke overflow handler on uaccess watchpoints
ARM: dts: imx6sx-sabreauto: Fix the phy-mode on fec2
ARM: dts: imx6sx-sdb: Fix the phy-mode on fec2
ARM: dts: imx6qdl-icore: Fix OTG_ID pin and sdcard detect
virtio_balloon: fix up endian-ness for free cmd id
Revert "drm/amdgpu: Fix NULL dereference in dpm sysfs handlers"
drm/amd/display: Clear dm_state for fast updates
drm/amdgpu: Prevent kernel-infoleak in amdgpu_info_ioctl()
drm/dbi: Fix SPI Type 1 (9-bit) transfer
drm: hold gem reference until object is no longer accessed
rds: Prevent kernel-infoleak in rds_notify_queue_get()
libtraceevent: Fix build with binutils 2.35
net/x25: Fix x25_neigh refcnt leak when x25 disconnect
net/x25: Fix null-ptr-deref in x25_disconnect
xfrm: policy: match with both mark and mask on user interfaces
ARM: dts sunxi: Relax a bit the CMA pool allocation range
xfrm: Fix crash when the hold queue is used.
ARM: dts: armada-38x: fix NETA lockup when repeatedly switching speeds
nvme-tcp: fix possible hang waiting for icresp response
selftests/net: rxtimestamp: fix clang issues for target arch PowerPC
selftests/net: psock_fanout: fix clang issues for target arch PowerPC
selftests/net: so_txtime: fix clang issues for target arch PowerPC
sh/tlb: Fix PGTABLE_LEVELS > 2
sh: Fix validation of system call number
net: hns3: fix a TX timeout issue
net: hns3: fix aRFS FD rules leftover after add a user FD rule
net/mlx5: E-switch, Destroy TSAR when fail to enable the mode
net/mlx5e: Fix error path of device attach
net/mlx5: Verify Hardware supports requested ptp function on a given pin
net/mlx5e: Modify uplink state on interface up/down
net/mlx5e: Fix kernel crash when setting vf VLANID on a VF dev
net: lan78xx: add missing endpoint sanity check
net: lan78xx: fix transfer-buffer memory leak
rhashtable: Fix unprotected RCU dereference in __rht_ptr
mlx4: disable device on shutdown
mlxsw: core: Increase scope of RCU read-side critical section
mlxsw: core: Free EMAD transactions using kfree_rcu()
ibmvnic: Fix IRQ mapping disposal in error path
bpf: Fix map leak in HASH_OF_MAPS map
mac80211: mesh: Free ie data when leaving mesh
mac80211: mesh: Free pending skb when destroying a mpath
arm64/alternatives: move length validation inside the subsection
arm64: csum: Fix handling of bad packets
Bluetooth: fix kernel oops in store_pending_adv_report
net: nixge: fix potential memory leak in nixge_probe()
net: gemini: Fix missing clk_disable_unprepare() in error path of gemini_ethernet_port_probe()
net/mlx5e: fix bpf_prog reference count leaks in mlx5e_alloc_rq
perf tools: Fix record failure when mixed with ARM SPE event
vxlan: fix memleak of fdb
usb: hso: Fix debug compile warning on sparc32
selftests: fib_nexthop_multiprefix: fix cleanup() netns deletion
qed: Disable "MFW indication via attention" SPAM every 5 minutes
selftests: net: ip_defrag: modprobe missing nf_defrag_ipv6 support
nfc: s3fwrn5: add missing release on skb in s3fwrn5_recv_frame
scsi: core: Run queue in case of I/O resource contention failure
parisc: add support for cmpxchg on u8 pointers
net: ethernet: ravb: exit if re-initialization fails in tx timeout
Revert "i2c: cadence: Fix the hold bit setting"
x86/unwind/orc: Fix ORC for newly forked tasks
x86/stacktrace: Fix reliable check for empty user task stacks
cxgb4: add missing release on skb in uld_send()
xen-netfront: fix potential deadlock in xennet_remove()
RISC-V: Set maximum number of mapped pages correctly
drivers/net/wan: lapb: Corrected the usage of skb_cow
KVM: arm64: Don't inherit exec permission across page-table levels
KVM: LAPIC: Prevent setting the tscdeadline timer if the lapic is hw disabled
x86/i8259: Use printk_deferred() to prevent deadlock
perf tests bp_account: Make global variable static
perf env: Do not return pointers to local variables
perf bench: Share some global variables to fix build with gcc 10
Linux 5.4.56
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I06b0147860242cfcac3dd8a7acefdb211020cab1
commit e4d9b04b973b2dbce7b42af95ea70d07da1c936d upstream.
Noticed with gcc 10 (fedora rawhide) that those variables were not being
declared as static, so end up with:
ld: /tmp/build/perf/bench/epoll-wait.o:/git/perf/tools/perf/bench/epoll-wait.c:93: multiple definition of `end'; /tmp/build/perf/bench/futex-hash.o:/git/perf/tools/perf/bench/futex-hash.c:40: first defined here
ld: /tmp/build/perf/bench/epoll-wait.o:/git/perf/tools/perf/bench/epoll-wait.c:93: multiple definition of `start'; /tmp/build/perf/bench/futex-hash.o:/git/perf/tools/perf/bench/futex-hash.c:40: first defined here
ld: /tmp/build/perf/bench/epoll-wait.o:/git/perf/tools/perf/bench/epoll-wait.c:93: multiple definition of `runtime'; /tmp/build/perf/bench/futex-hash.o:/git/perf/tools/perf/bench/futex-hash.c:40: first defined here
ld: /tmp/build/perf/bench/epoll-ctl.o:/git/perf/tools/perf/bench/epoll-ctl.c:38: multiple definition of `end'; /tmp/build/perf/bench/futex-hash.o:/git/perf/tools/perf/bench/futex-hash.c:40: first defined here
ld: /tmp/build/perf/bench/epoll-ctl.o:/git/perf/tools/perf/bench/epoll-ctl.c:38: multiple definition of `start'; /tmp/build/perf/bench/futex-hash.o:/git/perf/tools/perf/bench/futex-hash.c:40: first defined here
ld: /tmp/build/perf/bench/epoll-ctl.o:/git/perf/tools/perf/bench/epoll-ctl.c:38: multiple definition of `runtime'; /tmp/build/perf/bench/futex-hash.o:/git/perf/tools/perf/bench/futex-hash.c:40: first defined here
make[4]: *** [/git/perf/tools/build/Makefile.build:145: /tmp/build/perf/bench/perf-in.o] Error 1
Prefix those with bench__ and add them to bench/bench.h, so that we can
share those on the tools needing to access those variables from signal
handlers.
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20200303155811.GD13702@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ebcb9464a2ae3a547e97de476575c82ece0e93e2 upstream.
It is possible to return a pointer to a local variable when looking up
the architecture name for the running system and no normalization is
done on that value, i.e. we may end up returning the uts.machine local
variable.
While this doesn't happen on most arches, as normalization takes place,
lets fix this by making that a static variable and optimize it a bit by
not always running uname(), only the first time.
Noticed in fedora rawhide running with:
[perfbuilder@a5ff49d6e6e4 ~]$ gcc --version
gcc (GCC) 10.0.1 20200216 (Red Hat 10.0.1-0.8)
Reported-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cff20b3151ccab690715cb6cf0f5da5cccb32adf upstream.
To fix the build with newer gccs, that without this patch exit with:
LD /tmp/build/perf/tests/perf-in.o
ld: /tmp/build/perf/tests/bp_account.o:/git/perf/tools/perf/tests/bp_account.c:22: multiple definition of `the_var'; /tmp/build/perf/tests/bp_signal.o:/git/perf/tools/perf/tests/bp_signal.c:38: first defined here
make[4]: *** [/git/perf/tools/build/Makefile.build:145: /tmp/build/perf/tests/perf-in.o] Error 1
First noticed in fedora:rawhide/32 with:
[perfbuilder@a5ff49d6e6e4 ~]$ gcc --version
gcc (GCC) 10.0.1 20200216 (Red Hat 10.0.1-0.8)
Reported-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bdd65589593edd79b6a12ce86b3b7a7c6dae5208 upstream.
0day reported a possible circular locking dependency:
Chain exists of:
&irq_desc_lock_class --> console_owner --> &port_lock_key
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&port_lock_key);
lock(console_owner);
lock(&port_lock_key);
lock(&irq_desc_lock_class);
The reason for this is a printk() in the i8259 interrupt chip driver
which is invoked with the irq descriptor lock held, which reverses the
lock operations vs. printk() from arbitrary contexts.
Switch the printk() to printk_deferred() to avoid that.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/87365abt2v.fsf@nanos.tec.linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d2286ba7d574ba3103a421a2f9ec17cb5b0d87a1 upstream.
Prevent setting the tscdeadline timer if the lapic is hw disabled.
Fixes: bce87cce88 (KVM: x86: consolidate different ways to test for in-kernel LAPIC)
Cc: <stable@vger.kernel.org>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1596165141-28874-1-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b757b47a2fcba584d4a32fd7ee68faca510ab96f upstream.
If a stage-2 page-table contains an executable, read-only mapping at the
pte level (e.g. due to dirty logging being enabled), a subsequent write
fault to the same page which tries to install a larger block mapping
(e.g. due to dirty logging having been disabled) will erroneously inherit
the exec permission and consequently skip I-cache invalidation for the
rest of the block.
Ensure that exec permission is only inherited by write faults when the
new mapping is of the same size as the existing one. A subsequent
instruction abort will result in I-cache invalidation for the entire
block mapping.
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Quentin Perret <qperret@google.com>
Reviewed-by: Quentin Perret <qperret@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200723101714.15873-1-will@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8754e1379e7089516a449821f88e1fe1ebbae5e1 ]
This patch fixed 2 issues with the usage of skb_cow in LAPB drivers
"lapbether" and "hdlc_x25":
1) After skb_cow fails, kfree_skb should be called to drop a reference
to the skb. But in both drivers, kfree_skb is not called.
2) skb_cow should be called before skb_push so that is can ensure the
safety of skb_push. But in "lapbether", it is incorrectly called after
skb_push.
More details about these 2 issues:
1) The behavior of calling kfree_skb on failure is also the behavior of
netif_rx, which is called by this function with "return netif_rx(skb);".
So this function should follow this behavior, too.
2) In "lapbether", skb_cow is called after skb_push. This results in 2
logical issues:
a) skb_push is not protected by skb_cow;
b) An extra headroom of 1 byte is ensured after skb_push. This extra
headroom has no use in this function. It also has no use in the
upper-layer function that this function passes the skb to
(x25_lapb_receive_frame in net/x25/x25_dev.c).
So logically skb_cow should instead be called before skb_push.
Cc: Eric Dumazet <edumazet@google.com>
Cc: Martin Schiller <ms@dev.tdt.de>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d0d8aae64566b753c4330fbd5944b88af035f299 ]
Currently, maximum number of mapper pages are set to the pfn calculated
from the memblock size of the memblock containing kernel. This will work
until that memblock spans the entire memory. However, it will be set to
a wrong value if there are multiple memblocks defined in kernel
(e.g. with efi runtime services).
Set the the maximum value to the pfn calculated from dram size.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c2c633106453611be07821f53dff9e93a9d1c3f0 ]
There's a potential race in xennet_remove(); this is what the driver is
doing upon unregistering a network device:
1. state = read bus state
2. if state is not "Closed":
3. request to set state to "Closing"
4. wait for state to be set to "Closing"
5. request to set state to "Closed"
6. wait for state to be set to "Closed"
If the state changes to "Closed" immediately after step 1 we are stuck
forever in step 4, because the state will never go back from "Closed" to
"Closing".
Make sure to check also for state == "Closed" in step 4 to prevent the
deadlock.
Also add a 5 sec timeout any time we wait for the bus state to change,
to avoid getting stuck forever in wait_event().
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
