The description says 'If unsure, say N.' but
the module is built as M by default (once
the dependencies are satisfied).
When the module is selected (Y or M), it enables
NETFILTER_FAMILY_BRIDGE and SKB_EXTENSIONS
which alter kernel internal structures.
We (Android Studio Emulator) currently do not
use this module and think this it is more consistent
to have it disabled by default as opposite to
disabling it explicitly to prevent enabling
NETFILTER_FAMILY_BRIDGE and SKB_EXTENSIONS.
Signed-off-by: Roman Kiryanov <rkir@google.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
(cherry picked from commit 98bda63e20daab95bdc084ce00459a4f622a0505)
Bug: 150463745
Change-Id: I664d752f504598d21747d046930e6d7257c31253
Issuing write() with count parameter set to 0 on any file under
/proc/pressure/ will cause an OOB write because of the access to
buf[buf_size-1] when NUL-termination is performed. Fix this by checking
for buf_size to be non-zero.
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lkml.kernel.org/r/20200203212216.7076-1-surenb@google.com
(cherry picked from commit 6fcca0fa48118e6d63733eb4644c6cd880c15b8f)
Bug: 148159562
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Change-Id: I9ec7acfc6e1083c677a95b0ea1c559ab50152873
With LTO, modules with a large number of compilation units maybe end
up exceeding the for loop argument list in the shell. Reduce the
probability for this happening by including only the modules that have
exported symbols.
Bug: 150234396
Change-Id: I4a289aff47e1444aca28d1bd00b125628f39bcd5
Suggested-by: Hsiu-Chang Chen <hsiuchangchen@google.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Support future decompression of LZ4-compressed ramdisk images.
This support is in addition to the default support for gzip.
Bug: 150391496
Test: TreeHugger
Change-Id: I8c07e9363333c53cd6ff9c7e16fc42cbe318fe83
Signed-off-by: Alistair Delva <adelva@google.com>
By default mac80211_hwsim creates N radios with
MAC addresses like '02:00:00:nn:nn:00' where nnnn
is incremented.
We (Android Studio Emulator) need a way to have unique
MAC addresses, mac_prefix provides a way to specify
two octets in MAC address, i.e. '02:xx:xx:nn:nn:00'
to make it unique between emulator instances.
This is temporary solution and should be replaced
by HWSIM_CMD_NEW_RADIO with HWSIM_ATTR_PERM_ADDR,
the work is tracked in b/149778407.
Bug: 150388981
Bug: 149778407
Bug: 147493341
Test: check if wifi works on emulator
Signed-off-by: Roman Kiryanov <rkir@google.com>
Change-Id: Ibab0de6cb720d55c7be0b96e40ec70e221e04d7f
The MD4 algorithm is heavily broken and obsolete, and there seems to be
no reason for it to be enabled in GKI. It originally got enabled at
partner request alongside many other options with the rationale that
they changed the kernel ABI, so they needed to be enabled in GKI for any
module to use it. But that doesn't apply to MD4 because it doesn't
change the kernel ABI. Nor should any module be using MD4 anyway.
So let's disable MD4 again.
Bug: 135666008
Bug: 150302692
Change-Id: Iec0946984c4e58bffeab7888e689af035cdd512b
Signed-off-by: Eric Biggers <ebiggers@google.com>
When doing a cold build, autoksyms.h starts empty, and is updated late
in the build process to have visibility over the symbols used by in-tree
drivers. But since the symbol whitelist is known upfront, it can be used
to pre-populate autoksyms.h and maximize the amount of code that can be
compiled to its final state in a single pass, hence reducing build time.
Do this by using gen_autoksyms.sh to initialize autoksyms.h instead of
creating an empty file.
Bug: 148277666
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Tested-by: Matthias Maennich <maennich@google.com>
Reviewed-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/lkml/20200218094139.78835-4-qperret@google.com
Change-Id: I98f3394b190f097390f980e5d4d57981f91b22a6
In order to prepare the ground for a build-time optimization, split
adjust_autoksyms.sh into two scripts: one that generates autoksyms.h
based on all currently available information (whitelist, and .mod
files), and the other to inspect the diff between two versions of
autoksyms.h and trigger appropriate rebuilds.
Bug: 148277666
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Tested-by: Matthias Maennich <maennich@google.com>
Reviewed-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/lkml/20200218094139.78835-3-qperret@google.com
Change-Id: I7ed4f8f72c0ef9ac98419877efb5ef828d10b0d7
CONFIG_TRIM_UNUSED_KSYMS currently removes all unused exported symbols
from ksymtab. This works really well when using in-tree drivers, but
cannot be used in its current form if some of them are out-of-tree.
Indeed, even if the list of symbols required by out-of-tree drivers is
known at compile time, the only solution today to guarantee these don't
get trimmed is to set CONFIG_TRIM_UNUSED_KSYMS=n. This not only wastes
space, but also makes it difficult to control the ABI usable by vendor
modules in distribution kernels such as Android. Being able to control
the kernel ABI surface is particularly useful to ship a unique Generic
Kernel Image (GKI) for all vendors, which is a first step in the
direction of getting all vendors to contribute their code upstream.
As such, attempt to improve the situation by enabling users to specify a
symbol 'whitelist' at compile time. Any symbol specified in this
whitelist will be kept exported when CONFIG_TRIM_UNUSED_KSYMS is set,
even if it has no in-tree user. The whitelist is defined as a simple
text file, listing symbols, one per line.
Bug: 148277666
Acked-by: Jessica Yu <jeyu@kernel.org>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Tested-by: Matthias Maennich <maennich@google.com>
Reviewed-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Quentin Perret <qperret@google.com>
Link: https://lore.kernel.org/lkml/20200218094139.78835-2-qperret@google.com
Change-Id: Ie9a4bbb8eebb20202623f084859fb89e55a32698
With non-canonical CFI, LLVM generates jump table entries for external
symbols in modules and as a result, a function pointer passed from a
module to the core kernel will have a different address.
Disable the warning for now.
Bug: 145210207
Change-Id: Ifdcee3479280f7b97abdee6b4c746f447e0944e6
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Alistair Delva <adelva@google.com>
Disable CONFIG_RT_GROUP_SCHED to control RT cpu allowance globally.
ABI update report:
ABI DIFFERENCES HAVE BEEN DETECTED! (RC=8)
========================================================
Leaf changes summary: 2 artifacts changed
Changed leaf types summary: 2 leaf types changed
Removed/Changed/Added functions summary: 0 Removed, 0 Changed, 0 Added function
Removed/Changed/Added variables summary: 0 Removed, 0 Changed, 0 Added variable
'struct sched_rt_entity at sched.h:481:1' changed:
type size changed from 576 to 384 (in bits)
3 data member deletions:
'sched_rt_entity* sched_rt_entity::parent', at offset 384 (in bits) at sched.h:491:1
'rt_rq* sched_rt_entity::rt_rq', at offset 448 (in bits) at sched.h:493:1
'rt_rq* sched_rt_entity::my_q', at offset 512 (in bits) at sched.h:495:1
1033 impacted interfaces
========================================================
Bug: 149954332
Change-Id: I9487bd113502e52f19637e43109433cb13e97a23
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Add support for creating device links out of more DT properties.
To: lkml <linux-kernel@vger.kernel.org>
To: John Stultz <john.stultz@linaro.org>
To: Rob Herring <robh@kernel.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Kevin Hilman <khilman@kernel.org>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Len Brown <len.brown@intel.com>
Cc: Todd Kjos <tkjos@google.com>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-pm@vger.kernel.org
Signed-off-by: Saravana Kannan <saravanak@google.com>
Tested-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
(cherry picked from commit 2f7afc343d49eea0bf88ea5fc8cb3afc392356c3
https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git/ for-next)
Signed-off-by: John Stultz <john.stultz@linaro.org>
Link: https://lore.kernel.org/lkml/20200220055250.196456-1-saravanak@google.com/T/#u
Change-Id: I1b0eb38ee1c2762647dab79b5f18916e63980ab2
With commit 50d5ac3d7c ("FROMLIST: drm/msm/a6xx: Use the DMA
API for GMU memory objects") it started using the iova entry in
the a6xx_gmu_bo structure as a dma_attr_t. Unfortunately this
runs into type trouble on 32 bit platforms.
Specifically:
drivers/gpu/drm/msm/adreno/a6xx_gmu.c:943:49: error: passing
argument 3 of ‘dma_alloc_attrs’ from incompatible pointer type
[-Werror=incompatible-pointer-types]
as reported by kernelci:
https://kernelci.org/build/id/5e552216959c29be1c5ea41a/logs/
So this patch changes the type of iova to dma_addr_t to fix
these build issues.
Fixes: 50d5ac3d7c ("FROMLIST: drm/msm/a6xx: Use the DMA API for GMU memory objects")
Signed-off-by: John Stultz <john.stultz@linaro.org>
Change-Id: Ia3a76acc1d501c629508bf4d10a931353a49568d
Certain SoCs need to support a large amount of reserved memory
regions. For example, Qualcomm's SM8150 SoC requires that 20
regions of memory be reserved for a variety of reasons (e.g.
loading a peripheral subsystem's firmware image into a
particular space).
When adding more reserved memory regions to cater to different
usecases, the remaining number of reserved memory regions--12
to be exact--becomes too small. Thus, double the existing
limit of reserved memory regions.
Bug: 149547278
Link: https://lore.kernel.org/lkml/1582183859-26612-1-git-send-email-isaacm@codeaurora.org/
Change-Id: Ic89bf3610f177386e9a110895e559975ba515023
Signed-off-by: Patrick Daly <pdaly@codeaurora.org>
Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org>
To prevent keys from being compromised if an attacker acquires read
access to kernel memory, some inline encryption hardware supports
protecting the keys in hardware without software having access to or the
ability to set the plaintext keys. Instead, software only sees "wrapped
keys", which may differ on every boot. The keys can be initially
generated either by software (in which case they need to be imported to
hardware to be wrapped), or directly by the hardware.
Add support for this type of hardware by allowing keys to be flagged as
hardware-wrapped. When used, dm-default-key will pass the wrapped key
to the inline encryption hardware to encryption metadata. The hardware
will internally unwrap the key and derive the metadata encryption key.
Bug: 147209885
Test: Validate metadata encryption & FBE with wrapped keys.
Change-Id: I8078b116dab9e04d7f3f15f29f11823185ea5d50
Signed-off-by: Barani Muthukumaran <bmuthuku@codeaurora.org>
Update the device-mapper core to support exposing the inline crypto
support of wrapped keys through the device-mapper device.
derive_raw_secret in keyslot manager is used to derive the software
raw secret from the given wrapped keyblob using the underlying blk
device. Given that the raw_secret is the same for a given wrapped
keyblob the call exits when the first underlying blk-device suceeds.
Bug: 147209885
Test: Validated FBE with wrappedkey_v0 when /data is mounted on a
dm device.
Change-Id: Ia49ed61613607f8b82f2be0615e5b6d2f7533859
Signed-off-by: Barani Muthukumaran <bmuthuku@codeaurora.org>
blk-crypto-fallback does not support wrapped keys, hence
prevent falling back when program_key fails. Add 'is_hw_wrapped'
flag to blk-crypto-key to mention if the key is wrapped
when the key is initialized.
Bug: 147209885
Test: Validate FBE, simulate a failure in the underlying blk
device and ensure the call fails without falling back
to blk-crypto-fallback.
Change-Id: I8bc301ca1ac9e55ba6ab622e8325486916b45c56
Signed-off-by: Barani Muthukumaran <bmuthuku@codeaurora.org>
The GMU has very few memory allocations and uses a flat memory space so
there is no good reason to go out of our way to bypass the DMA APIs which
were basically designed for this exact scenario.
v2: Pass force_dma false to of_dma_configure to require that the DMA
region be set up and return error from of_dma_configure to fail probe.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Link: https://lore.kernel.org/lkml/1582223216-23459-5-git-send-email-jcrouse@codeaurora.org/
Change-Id: I4868cc684c5201d75e8bdba2bb4e2f949794f98d
GMU DMA allocations need to be mapped between 0x60000000 and 0x80000000 in
the GMU virtual address space. Specify the dma-range so the iova allocator
does the right thing.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Link: https://lore.kernel.org/lkml/1582223216-23459-4-git-send-email-jcrouse@codeaurora.org/
Change-Id: I198b3ed8bad95ba38db00dd181604875b589b497
Since the "dma-ranges" property is only valid for a node representing a
bus, of_dma_get_range() currently assumes the node passed in is a leaf
representing a device, and starts the walk from its parent. In cases
like PCI host controllers on typical FDT systems, however, where the PCI
endpoints are probed dynamically the initial leaf node represents the
'bus' itself, and this logic means we fail to consider any "dma-ranges"
describing the host bridge itself. Rework the logic such that
of_dma_get_range() also works correctly starting from a bus node
containing "dma-ranges".
While this does mean "dma-ranges" could incorrectly be in a device leaf
node, there isn't really any way in this function to ensure that a leaf
node is or isn't a bus node.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
[robh: Allow for the bus child node to still be passed in]
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
(cherry picked from commit 951d48855d86e72e0d6de73440fe09d363168064)
Signed-off-by: John Stultz <john.stultz@linaro.org>
Change-Id: Ib90e1ef3b33a1abcce71cc657bb58916a48220a4
of_pci_range_parser_one() has a bug when parsing dma-ranges. When it
translates the parent address (aka cpu address in the code), 'ranges' is
always being used. This happens to work because most users are just 1:1
translation.
Cc: Robin Murphy <robin.murphy@arm.com>
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Rob Herring <robh@kernel.org>
(cherry picked from commit 645c138636de3d6d6ed7d92edec39298fd6873d7)
Signed-off-by: John Stultz <john.stultz@linaro.org>
Change-Id: I7dacf6a346c3e79c7a68c5826b9193b19f4dd03a
'dma-ranges' frequently exists without parent nodes having 'dma-ranges'.
While this is an error for 'ranges', this is fine because DMA capable
devices always have a translatable DMA address. Also, with no
'dma-ranges' at all, the assumption is that DMA addresses are 1:1 with
no restrictions unless perhaps the device itself has implicit
restrictions.
Cc: Robin Murphy <robin.murphy@arm.com>
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Rob Herring <robh@kernel.org>
(cherry picked from commit 81db12ee15cb83926e290a8a3654a2dfebc80935)
Signed-off-by: John Stultz <john.stultz@linaro.org>
Change-Id: I1c80cd1757ddf143f06e7795fd1ac06da93c0ce9
In some cases such as PCI host controllers, we may have a "parent bus"
which is an OF leaf node, but still need to correctly parse ranges from
the point of view of that bus. For that, factor out variants of the
"#addr-cells" and "#size-cells" parsers which do not assume they have a
device node and thus immediately traverse upwards before reading the
relevant property.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
[robh: don't make of_bus_n_{addr,size}_cells() public]
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Rob Herring <robh@kernel.org>
(cherry picked from commit b68ac8dc22ebbf003e26e44bf4dd3030c076df5a)
Signed-off-by: John Stultz <john.stultz@linaro.org>
Change-Id: Ic36911cbf4bc48ec35d4f054a6b2ff311a7d2d28
Much like for address translation, when checking for DMA coherence we
should be sure to walk up the DMA hierarchy, rather than the MMIO one,
now that we can accommodate them being different.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Rob Herring <robh@kernel.org>
(cherry picked from commit c60bf3eb888a362100aa1bdbea351dab681e262a)
Signed-off-by: John Stultz <john.stultz@linaro.org>
Change-Id: Ib28a7baf7f2fd40603b5e89d256fd8a476fc89a8
Add of_get_next_dma_parent() helper which is similar to
__of_get_dma_parent(), but can be used in iterators and decrements the
ref count on the prior parent.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Rob Herring <robh@kernel.org>
(cherry picked from commit 862ab5578f754117742c8b8c8e5ddf98bdb190ba)
Signed-off-by: John Stultz <john.stultz@linaro.org>
Change-Id: I928766d6c3da03e21faefb4ed50cfb76e5d4fbf9
of_dma_get_range() is only used within the DT core code, so remove the
export and move the header declaration to the private header.
Cc: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Rob Herring <robh@kernel.org>
(cherry picked from commit 6e6faf63744333373db8bc64aea52dab86cbf0bc)
Signed-off-by: John Stultz <john.stultz@linaro.org>
Change-Id: I640da60a6eb57376039a070d134aa9278480e843
Leaf changes summary: 2 artifacts changed
Changed leaf types summary: 2 leaf types changed
Removed/Changed/Added functions summary: 0 Removed, 0 Changed, 0 Added function
Removed/Changed/Added variables summary: 0 Removed, 0 Changed, 0 Added variable
'enum cpuhp_state at cpuhotplug.h:25:1' changed:
type size hasn't changed
1 enumerator insertion:
'cpuhp_state::CPUHP_PADATA_DEAD' value '35'
123 enumerator changes:
4 impacted interfaces:
function void __cpuhp_remove_state(cpuhp_state, bool)
function int __cpuhp_setup_state(cpuhp_state, const char*, bool, void ()*, void ()*, bool)
function int __cpuhp_state_add_instance(cpuhp_state, hlist_node*, bool)
function int __cpuhp_state_remove_instance(cpuhp_state, hlist_node*, bool)
'struct dma_device at dmaengine.h:722:1' changed:
type size changed from 2368 to 2432 (in bits)
1 data member insertion:
'module* dma_device::owner', at offset 832 (in bits) at dmaengine.h:741:1
there are data member changes:
'u32 dma_device::src_addr_widths' offset changed from 832 to 896 (in bits) (by +64 bits)
'u32 dma_device::dst_addr_widths' offset changed from 864 to 928 (in bits) (by +64 bits)
'u32 dma_device::directions' offset changed from 896 to 960 (in bits) (by +64 bits)
'u32 dma_device::max_burst' offset changed from 928 to 992 (in bits) (by +64 bits)
'bool dma_device::descriptor_reuse' offset changed from 960 to 1024 (in bits) (by +64 bits)
'dma_residue_granularity dma_device::residue_granularity' offset changed from 992 to 1056 (in bits) (by +64 bits)
'void ()* dma_device::device_alloc_chan_resources' offset changed from 1024 to 1088 (in bits) (by +64 bits)
'void ()* dma_device::device_free_chan_resources' offset changed from 1088 to 1152 (in bits) (by +64 bits)
'void ()* dma_device::device_prep_dma_memcpy' offset changed from 1152 to 1216 (in bits) (by +64 bits)
'void ()* dma_device::device_prep_dma_xor' offset changed from 1216 to 1280 (in bits) (by +64 bits)
'void ()* dma_device::device_prep_dma_xor_val' offset changed from 1280 to 1344 (in bits) (by +64 bits)
'void ()* dma_device::device_prep_dma_pq' offset changed from 1344 to 1408 (in bits) (by +64 bits)
'void ()* dma_device::device_prep_dma_pq_val' offset changed from 1408 to 1472 (in bits) (by +64 bits)
'void ()* dma_device::device_prep_dma_memset' offset changed from 1472 to 1536 (in bits) (by +64 bits)
'void ()* dma_device::device_prep_dma_memset_sg' offset changed from 1536 to 1600 (in bits) (by +64 bits)
'void ()* dma_device::device_prep_dma_interrupt' offset changed from 1600 to 1664 (in bits) (by +64 bits)
'void ()* dma_device::device_prep_slave_sg' offset changed from 1664 to 1728 (in bits) (by +64 bits)
'void ()* dma_device::device_prep_dma_cyclic' offset changed from 1728 to 1792 (in bits) (by +64 bits)
'void ()* dma_device::device_prep_interleaved_dma' offset changed from 1792 to 1856 (in bits) (by +64 bits)
'void ()* dma_device::device_prep_dma_imm_data' offset changed from 1856 to 1920 (in bits) (by +64 bits)
'void ()* dma_device::device_config' offset changed from 1920 to 1984 (in bits) (by +64 bits)
'void ()* dma_device::device_pause' offset changed from 1984 to 2048 (in bits) (by +64 bits)
'void ()* dma_device::device_resume' offset changed from 2048 to 2112 (in bits) (by +64 bits)
'void ()* dma_device::device_terminate_all' offset changed from 2112 to 2176 (in bits) (by +64 bits)
'void ()* dma_device::device_synchronize' offset changed from 2176 to 2240 (in bits) (by +64 bits)
'void ()* dma_device::device_tx_status' offset changed from 2240 to 2304 (in bits) (by +64 bits)
'void ()* dma_device::device_issue_pending' offset changed from 2304 to 2368 (in bits) (by +64 bits)
2 impacted interfaces:
function void dma_release_channel(dma_chan*)
function dma_chan* dma_request_chan(device*, const char*)
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I4aacadba49717670df0a06b1aae0413b1de0f37a
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEZH8oZUiU471FcZm+ONu9yGCSaT4FAl5TfSAACgkQONu9yGCS
aT4I8w//SU+w9Tj8Crpt1BI7Lk2AiTGvyZtX0wGd53vzFKGy+Wi1Oba1ybB+xyYw
UgMJJpoOgp9gTatRgjDl0vO/7U7vZckigPpog3pSW+xq2JW0kTWGS2z04hUjWKkG
W4l3sAGwHRv7MTBbpjECDSHv+6x6ZqlWcVodpkHqLNmGxR0mYuiB6Zu8QuCu1bl0
K0SAlt+yd0laUt2bU3wpEqBwGXHepz+IqsqcYp78sAeytT8ds9ZfPxKv98CvLlXs
VLVr87UqZy3Hkl6IWKGrmdhWbTZE+3AyjKnxlA8PovA0ET5xO/IFPLHVhVX+or+5
UFp/1qvacr+EIu8CKvftc2n1CflaRXIn/QNpwdemh94mi/2TqiXiqAUu1EiW56vg
/PUH8G72Q26AiWSmD3WRr09ohTu4hfz6fIDKV60qmdVe4AUffLw0SnBEE0VFA3/S
lVKZeXKkePeMlHcTyRDQ6+/y49yjfq2exdrjetypOwRa1emHxj/YsfdnEWYfwT53
sikMLjP4XA7v5rsDr9LJTwQL/V/7euu1Hr3lSGpRv8vmePprvfmivTLcY5tgvOTC
GZ51Em+CxJ+W4vCJKHuM7i0nUvf2Knn5lBidq4KsvLRUuZ31mSXSfSn4bW6Gl/Jm
RZPDC71MqT/FMtfuQLlVNqIw2umC1buNa5SwZ8GhJG6za4gU4FU=
=L+e0
-----END PGP SIGNATURE-----
Merge 5.4.22 into android-5.4
Changes in 5.4.22
core: Don't skip generic XDP program execution for cloned SKBs
enic: prevent waking up stopped tx queues over watchdog reset
net/smc: fix leak of kernel memory to user space
net: dsa: tag_qca: Make sure there is headroom for tag
net/sched: matchall: add missing validation of TCA_MATCHALL_FLAGS
net/sched: flower: add missing validation of TCA_FLOWER_FLAGS
drm/gma500: Fixup fbdev stolen size usage evaluation
ath10k: Fix qmi init error handling
wil6210: fix break that is never reached because of zero'ing of a retry counter
drm/qxl: Complete exception handling in qxl_device_init()
rcu/nocb: Fix dump_tree hierarchy print always active
rcu: Fix missed wakeup of exp_wq waiters
rcu: Fix data-race due to atomic_t copy-by-value
f2fs: preallocate DIO blocks when forcing buffered_io
f2fs: call f2fs_balance_fs outside of locked page
media: meson: add missing allocation failure check on new_buf
clk: meson: pll: Fix by 0 division in __pll_params_to_rate()
cpu/hotplug, stop_machine: Fix stop_machine vs hotplug order
brcmfmac: Fix memory leak in brcmf_p2p_create_p2pdev()
brcmfmac: Fix use after free in brcmf_sdio_readframes()
PCI: Fix pci_add_dma_alias() bitmask size
drm/amd/display: Map ODM memory correctly when doing ODM combine
leds: pca963x: Fix open-drain initialization
ext4: fix ext4_dax_read/write inode locking sequence for IOCB_NOWAIT
ALSA: ctl: allow TLV read operation for callback type of element in locked case
gianfar: Fix TX timestamping with a stacked DSA driver
pinctrl: sh-pfc: sh7264: Fix CAN function GPIOs
printk: fix exclusive_console replaying
drm/mipi_dbi: Fix off-by-one bugs in mipi_dbi_blank()
drm/msm/adreno: fix zap vs no-zap handling
pxa168fb: Fix the function used to release some memory in an error handling path
media: ov5640: Fix check for PLL1 exceeding max allowed rate
media: i2c: mt9v032: fix enum mbus codes and frame sizes
media: sun4i-csi: Deal with DRAM offset
media: sun4i-csi: Fix data sampling polarity handling
media: sun4i-csi: Fix [HV]sync polarity handling
clk: at91: sam9x60: fix programmable clock prescaler
powerpc/powernv/iov: Ensure the pdn for VFs always contains a valid PE number
clk: meson: meson8b: make the CCF use the glitch-free mali mux
gpio: gpio-grgpio: fix possible sleep-in-atomic-context bugs in grgpio_irq_map/unmap()
iommu/vt-d: Fix off-by-one in PASID allocation
x86/fpu: Deactivate FPU state after failure during state load
char/random: silence a lockdep splat with printk()
media: sti: bdisp: fix a possible sleep-in-atomic-context bug in bdisp_device_run()
kernel/module: Fix memleak in module_add_modinfo_attrs()
IB/core: Let IB core distribute cache update events
pinctrl: baytrail: Do not clear IRQ flags on direct-irq enabled pins
efi/x86: Map the entire EFI vendor string before copying it
MIPS: Loongson: Fix potential NULL dereference in loongson3_platform_init()
sparc: Add .exit.data section.
net: ethernet: ixp4xx: Standard module init
raid6/test: fix a compilation error
uio: fix a sleep-in-atomic-context bug in uio_dmem_genirq_irqcontrol()
drm/amdgpu/sriov: workaround on rev_id for Navi12 under sriov
spi: fsl-lpspi: fix only one cs-gpio working
drm/nouveau/nouveau: fix incorrect sizeof on args.src an args.dst
usb: gadget: udc: fix possible sleep-in-atomic-context bugs in gr_probe()
usb: dwc2: Fix IN FIFO allocation
clocksource/drivers/bcm2835_timer: Fix memory leak of timer
drm/amd/display: Clear state after exiting fixed active VRR state
kselftest: Minimise dependency of get_size on C library interfaces
jbd2: clear JBD2_ABORT flag before journal_reset to update log tail info when load journal
ext4: fix deadlock allocating bio_post_read_ctx from mempool
clk: ti: dra7: fix parent for gmac_clkctrl
x86/sysfb: Fix check for bad VRAM size
pwm: omap-dmtimer: Simplify error handling
udf: Allow writing to 'Rewritable' partitions
dmaengine: fsl-qdma: fix duplicated argument to &&
wan/hdlc_x25: fix skb handling
s390/pci: Fix possible deadlock in recover_store()
powerpc/iov: Move VF pdev fixup into pcibios_fixup_iov()
tracing: Fix tracing_stat return values in error handling paths
tracing: Fix very unlikely race of registering two stat tracers
ARM: 8952/1: Disable kmemleak on XIP kernels
ext4, jbd2: ensure panic when aborting with zero errno
ath10k: Correct the DMA direction for management tx buffers
rtw88: fix rate mask for 1SS chip
brcmfmac: sdio: Fix OOB interrupt initialization on brcm43362
selftests: settings: tests can be in subsubdirs
rtc: i2c/spi: Avoid inclusion of REGMAP support when not needed
drm/amd/display: Retrain dongles when SINK_COUNT becomes non-zero
tracing: Simplify assignment parsing for hist triggers
nbd: add a flush_workqueue in nbd_start_device
KVM: s390: ENOTSUPP -> EOPNOTSUPP fixups
Btrfs: keep pages dirty when using btrfs_writepage_fixup_worker
drivers/block/zram/zram_drv.c: fix error return codes not being returned in writeback_store
block, bfq: do not plug I/O for bfq_queues with no proc refs
kconfig: fix broken dependency in randconfig-generated .config
clk: qcom: Don't overwrite 'cfg' in clk_rcg2_dfs_populate_freq()
clk: qcom: rcg2: Don't crash if our parent can't be found; return an error
drm/amdkfd: Fix a bug in SDMA RLC queue counting under HWS mode
bpf, sockhash: Synchronize_rcu before free'ing map
drm/amdgpu: remove 4 set but not used variable in amdgpu_atombios_get_connector_info_from_object_table
ath10k: correct the tlv len of ath10k_wmi_tlv_op_gen_config_pno_start
drm/amdgpu: Ensure ret is always initialized when using SOC15_WAIT_ON_RREG
drm/panel: simple: Add Logic PD Type 28 display support
arm64: dts: rockchip: Fix NanoPC-T4 cooling maps
modules: lockdep: Suppress suspicious RCU usage warning
ASoC: intel: sof_rt5682: Add quirk for number of HDMI DAI's
ASoC: intel: sof_rt5682: Add support for tgl-max98357a-rt5682
regulator: rk808: Lower log level on optional GPIOs being not available
net/wan/fsl_ucc_hdlc: reject muram offsets above 64K
NFC: port100: Convert cpu_to_le16(le16_to_cpu(E1) + E2) to use le16_add_cpu().
arm64: dts: allwinner: H6: Add PMU mode
arm64: dts: allwinner: H5: Add PMU node
arm: dts: allwinner: H3: Add PMU node
opp: Free static OPPs on errors while adding them
selinux: ensure we cleanup the internal AVC counters on error in avc_insert()
arm64: dts: qcom: msm8996: Disable USB2 PHY suspend by core
padata: validate cpumask without removed CPU during offline
clk: imx: Add correct failure handling for clk based helpers
ARM: exynos_defconfig: Bring back explicitly wanted options
ARM: dts: imx6: rdu2: Disable WP for USDHC2 and USDHC3
ARM: dts: imx6: rdu2: Limit USBH1 to Full Speed
bus: ti-sysc: Implement quirk handling for CLKDM_NOAUTO
PCI: iproc: Apply quirk_paxc_bridge() for module as well as built-in
media: cx23885: Add support for AVerMedia CE310B
PCI: Add generic quirk for increasing D3hot delay
PCI: Increase D3 delay for AMD Ryzen5/7 XHCI controllers
Revert "nfp: abm: fix memory leak in nfp_abm_u32_knode_replace"
gpu/drm: ingenic: Avoid null pointer deference in plane atomic update
selftests/net: make so_txtime more robust to timer variance
media: v4l2-device.h: Explicitly compare grp{id,mask} to zero in v4l2_device macros
reiserfs: Fix spurious unlock in reiserfs_fill_super() error handling
samples/bpf: Set -fno-stack-protector when building BPF programs
r8169: check that Realtek PHY driver module is loaded
fore200e: Fix incorrect checks of NULL pointer dereference
netfilter: nft_tunnel: add the missing ERSPAN_VERSION nla_policy
ALSA: usx2y: Adjust indentation in snd_usX2Y_hwdep_dsp_status
PCI: Add nr_devfns parameter to pci_add_dma_alias()
PCI: Add DMA alias quirk for PLX PEX NTB
b43legacy: Fix -Wcast-function-type
ipw2x00: Fix -Wcast-function-type
iwlegacy: Fix -Wcast-function-type
rtlwifi: rtl_pci: Fix -Wcast-function-type
orinoco: avoid assertion in case of NULL pointer
drm/amdgpu: fix KIQ ring test fail in TDR of SRIOV
clk: qcom: smd: Add missing bimc clock
ACPICA: Disassembler: create buffer fields in ACPI_PARSE_LOAD_PASS1
nfsd: Clone should commit src file metadata too
scsi: ufs: Complete pending requests in host reset and restore path
scsi: aic7xxx: Adjust indentation in ahc_find_syncrate
crypto: inside-secure - add unspecified HAS_IOMEM dependency
drm/mediatek: handle events when enabling/disabling crtc
clk: renesas: rcar-gen3: Allow changing the RPC[D2] clocks
ARM: dts: r8a7779: Add device node for ARM global timer
selinux: ensure we cleanup the internal AVC counters on error in avc_update()
scsi: lpfc: Fix: Rework setting of fdmi symbolic node name registration
arm64: dts: qcom: db845c: Enable ath10k 8bit host-cap quirk
iommu/amd: Check feature support bit before accessing MSI capability registers
iommu/amd: Only support x2APIC with IVHD type 11h/40h
iommu/iova: Silence warnings under memory pressure
clk: actually call the clock init before any other callback of the clock
dmaengine: Store module owner in dma_device struct
dmaengine: imx-sdma: Fix memory leak
bpf: Print error message for bpftool cgroup show
net: phy: realtek: add logging for the RGMII TX delay configuration
crypto: chtls - Fixed memory leak
x86/vdso: Provide missing include file
PM / devfreq: exynos-ppmu: Fix excessive stack usage
PM / devfreq: rk3399_dmc: Add COMPILE_TEST and HAVE_ARM_SMCCC dependency
drm/fbdev: Fallback to non tiled mode if all tiles not present
pinctrl: sh-pfc: sh7269: Fix CAN function GPIOs
reset: uniphier: Add SCSSI reset control for each channel
ASoC: soc-topology: fix endianness issues
fbdev: fix numbering of fbcon options
RDMA/rxe: Fix error type of mmap_offset
clk: sunxi-ng: add mux and pll notifiers for A64 CPU clock
ALSA: sh: Fix unused variable warnings
clk: Use parent node pointer during registration if necessary
clk: uniphier: Add SCSSI clock gate for each channel
ALSA: hda/realtek - Apply mic mute LED quirk for Dell E7xx laptops, too
ALSA: sh: Fix compile warning wrt const
net: phy: fixed_phy: fix use-after-free when checking link GPIO
tools lib api fs: Fix gcc9 stringop-truncation compilation error
vfio/spapr/nvlink2: Skip unpinning pages on error exit
ASoC: Intel: sof_rt5682: Ignore the speaker amp when there isn't one.
ACPI: button: Add DMI quirk for Razer Blade Stealth 13 late 2019 lid switch
iommu/vt-d: Match CPU and IOMMU paging mode
iommu/vt-d: Avoid sending invalid page response
drm/amdkfd: Fix permissions of hang_hws
mlx5: work around high stack usage with gcc
RDMA/hns: Avoid printing address of mtt page
drm: remove the newline for CRC source name.
usb: dwc3: use proper initializers for property entries
ARM: dts: stm32: Add power-supply for DSI panel on stm32f469-disco
usbip: Fix unsafe unaligned pointer usage
udf: Fix free space reporting for metadata and virtual partitions
drm/mediatek: Add gamma property according to hardware capability
staging: rtl8188: avoid excessive stack usage
IB/hfi1: Add software counter for ctxt0 seq drop
IB/hfi1: Add RcvShortLengthErrCnt to hfi1stats
soc/tegra: fuse: Correct straps' address for older Tegra124 device trees
efi/x86: Don't panic or BUG() on non-critical error conditions
rcu: Use WRITE_ONCE() for assignments to ->pprev for hlist_nulls
Input: edt-ft5x06 - work around first register access error
bnxt: Detach page from page pool before sending up the stack
x86/nmi: Remove irq_work from the long duration NMI handler
wan: ixp4xx_hss: fix compile-testing on 64-bit
clocksource: davinci: only enable clockevents once tim34 is initialized
arm64: dts: rockchip: fix dwmmc clock name for px30
arm64: dts: rockchip: add reg property to brcmf sub-nodes
ARM: dts: rockchip: add reg property to brcmf sub node for rk3188-bqedison2qc
ALSA: usb-audio: Add boot quirk for MOTU M Series
ASoC: atmel: fix build error with CONFIG_SND_ATMEL_SOC_DMA=m
raid6/test: fix a compilation warning
tty: synclinkmp: Adjust indentation in several functions
tty: synclink_gt: Adjust indentation in several functions
misc: xilinx_sdfec: fix xsdfec_poll()'s return type
visorbus: fix uninitialized variable access
driver core: platform: Prevent resouce overflow from causing infinite loops
driver core: Print device when resources present in really_probe()
ASoC: SOF: Intel: hda-dai: fix compilation warning in pcm_prepare
bpf: Return -EBADRQC for invalid map type in __bpf_tx_xdp_map
vme: bridges: reduce stack usage
drm/nouveau/secboot/gm20b: initialize pointer in gm20b_secboot_new()
drm/nouveau/gr/gk20a,gm200-: add terminators to method lists read from fw
drm/nouveau: Fix copy-paste error in nouveau_fence_wait_uevent_handler
drm/nouveau/drm/ttm: Remove set but not used variable 'mem'
drm/nouveau/fault/gv100-: fix memory leak on module unload
dm thin: don't allow changing data device during thin-pool reload
gpiolib: Set lockdep class for hierarchical irq domains
drm/vmwgfx: prevent memory leak in vmw_cmdbuf_res_add
perf/imx_ddr: Fix cpu hotplug state cleanup
usb: musb: omap2430: Get rid of musb .set_vbus for omap2430 glue
kbuild: remove *.tmp file when filechk fails
iommu/arm-smmu-v3: Use WRITE_ONCE() when changing validity of an STE
ALSA: usb-audio: unlock on error in probe
f2fs: set I_LINKABLE early to avoid wrong access by vfs
f2fs: free sysfs kobject
scsi: ufs: pass device information to apply_dev_quirks
scsi: ufs-mediatek: add apply_dev_quirks variant operation
scsi: iscsi: Don't destroy session if there are outstanding connections
crypto: essiv - fix AEAD capitalization and preposition use in help text
ALSA: usb-audio: add implicit fb quirk for MOTU M Series
RDMA/mlx5: Don't fake udata for kernel path
arm64: lse: fix LSE atomics with LLVM's integrated assembler
arm64: fix alternatives with LLVM's integrated assembler
drm/amd/display: fixup DML dependencies
EDAC/sifive: Fix return value check in ecc_register()
KVM: PPC: Remove set but not used variable 'ra', 'rs', 'rt'
arm64: dts: ti: k3-j721e-main: Add missing power-domains for smmu
sched/core: Fix size of rq::uclamp initialization
sched/topology: Assert non-NUMA topology masks don't (partially) overlap
perf/x86/amd: Constrain Large Increment per Cycle events
watchdog/softlockup: Enforce that timestamp is valid on boot
debugobjects: Fix various data races
ASoC: SOF: Intel: hda: Fix SKL dai count
regulator: vctrl-regulator: Avoid deadlock getting and setting the voltage
f2fs: fix memleak of kobject
x86/mm: Fix NX bit clearing issue in kernel_map_pages_in_pgd
pwm: omap-dmtimer: Remove PWM chip in .remove before making it unfunctional
cmd64x: potential buffer overflow in cmd64x_program_timings()
ide: serverworks: potential overflow in svwks_set_pio_mode()
pwm: Remove set but not set variable 'pwm'
btrfs: fix possible NULL-pointer dereference in integrity checks
btrfs: safely advance counter when looking up bio csums
btrfs: device stats, log when stats are zeroed
module: avoid setting info->name early in case we can fall back to info->mod->name
remoteproc: Initialize rproc_class before use
regulator: core: Fix exported symbols to the exported GPL version
irqchip/mbigen: Set driver .suppress_bind_attrs to avoid remove problems
ALSA: hda/hdmi - add retry logic to parse_intel_hdmi()
spi: spi-fsl-qspi: Ensure width is respected in spi-mem operations
kbuild: use -S instead of -E for precise cc-option test in Kconfig
objtool: Fix ARCH=x86_64 build error
x86/decoder: Add TEST opcode to Group3-2
s390: adjust -mpacked-stack support check for clang 10
s390/ftrace: generate traced function stack frame
driver core: platform: fix u32 greater or equal to zero comparison
bpf, btf: Always output invariant hit in pahole DWARF to BTF transform
ALSA: hda - Add docking station support for Lenovo Thinkpad T420s
sunrpc: Fix potential leaks in sunrpc_cache_unhash()
drm/nouveau/mmu: fix comptag memory leak
powerpc/sriov: Remove VF eeh_dev state when disabling SR-IOV
media: uvcvideo: Add a quirk to force GEO GC6500 Camera bits-per-pixel value
btrfs: separate definition of assertion failure handlers
btrfs: Fix split-brain handling when changing FSID to metadata uuid
bcache: cached_dev_free needs to put the sb page
bcache: rework error unwinding in register_bcache
bcache: fix use-after-free in register_bcache()
iommu/vt-d: Remove unnecessary WARN_ON_ONCE()
alarmtimer: Make alarmtimer platform device child of RTC device
selftests: bpf: Reset global state between reuseport test runs
jbd2: switch to use jbd2_journal_abort() when failed to submit the commit record
jbd2: make sure ESHUTDOWN to be recorded in the journal superblock
powerpc/pseries/lparcfg: Fix display of Maximum Memory
selftests/eeh: Bump EEH wait time to 60s
ARM: 8951/1: Fix Kexec compilation issue.
ALSA: usb-audio: add quirks for Line6 Helix devices fw>=2.82
hostap: Adjust indentation in prism2_hostapd_add_sta
rtw88: fix potential NULL skb access in TX ISR
iwlegacy: ensure loop counter addr does not wrap and cause an infinite loop
cifs: fix unitialized variable poential problem with network I/O cache lock patch
cifs: Fix mount options set in automount
cifs: fix NULL dereference in match_prepath
bpf: map_seq_next should always increase position index
powerpc/mm: Don't log user reads to 0xffffffff
ceph: check availability of mds cluster on mount after wait timeout
rbd: work around -Wuninitialized warning
drm/amd/display: do not allocate display_mode_lib unnecessarily
irqchip/gic-v3: Only provision redistributors that are enabled in ACPI
drm/nouveau/disp/nv50-: prevent oops when no channel method map provided
char: hpet: Fix out-of-bounds read bug
ftrace: fpid_next() should increase position index
trigger_next should increase position index
radeon: insert 10ms sleep in dce5_crtc_load_lut
powerpc: Do not consider weak unresolved symbol relocations as bad
btrfs: do not do delalloc reservation under page lock
ocfs2: make local header paths relative to C files
ocfs2: fix a NULL pointer dereference when call ocfs2_update_inode_fsync_trans()
lib/scatterlist.c: adjust indentation in __sg_alloc_table
reiserfs: prevent NULL pointer dereference in reiserfs_insert_item()
bcache: fix memory corruption in bch_cache_accounting_clear()
bcache: explicity type cast in bset_bkey_last()
bcache: fix incorrect data type usage in btree_flush_write()
irqchip/gic-v3-its: Reference to its_invall_cmd descriptor when building INVALL
nvmet: Pass lockdep expression to RCU lists
nvme-pci: remove nvmeq->tags
iwlwifi: mvm: Fix thermal zone registration
iwlwifi: mvm: Check the sta is not NULL in iwl_mvm_cfg_he_sta()
asm-generic/tlb: add missing CONFIG symbol
microblaze: Prevent the overflow of the start
brd: check and limit max_part par
drm/amdgpu/smu10: fix smu10_get_clock_by_type_with_latency
drm/amdgpu/smu10: fix smu10_get_clock_by_type_with_voltage
NFS: Fix memory leaks
help_next should increase position index
i40e: Relax i40e_xsk_wakeup's return value when PF is busy
cifs: log warning message (once) if out of disk space
virtio_balloon: prevent pfn array overflow
fuse: don't overflow LLONG_MAX with end offset
mlxsw: spectrum_dpipe: Add missing error path
s390/pci: Recover handle in clp_set_pci_fn()
drm/amdgpu/display: handle multiple numbers of fclks in dcn_calcs.c (v2)
bcache: properly initialize 'path' and 'err' in register_bcache()
rtc: Kconfig: select REGMAP_I2C when necessary
Linux 5.4.22
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: Iaeb3945493ecc81a0ae90ef87b19ceb2caf48164
[ Upstream commit 578c2b661e2b1b474ea3571a3c3c6d57bae89e8d ]
Some i2c RTC drivers are using regmap but are not selecting REGMAP_I2C
which may lead to build failures.
Link: https://lore.kernel.org/r/20200127221724.10160-2-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 29cda393bcaad160c4bf3676ddd99855adafc72f ]
Patch "bcache: rework error unwinding in register_bcache" from
Christoph Hellwig changes the local variables 'path' and 'err'
in undefined initial state. If the code in register_bcache() jumps
to label 'out:' or 'out_module_put:' by goto, these two variables
might be reference with undefined value by the following line,
out_module_put:
module_put(THIS_MODULE);
out:
pr_info("error %s: %s", path, err);
return ret;
Therefore this patch initializes these two local variables properly
in register_bcache() to avoid such issue.
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c37243579d6c881c575dcfb54cf31c9ded88f946 ]
We might get different numbers of clocks from powerplay depending
on what the OEM has populated.
v2: add assert for at least one level
Bug: https://gitlab.freedesktop.org/drm/amd/issues/963
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 17cdec960cf776b20b1fb08c622221babe591d51 ]
When we try to recover a PCI function using
echo 1 > /sys/bus/pci/devices/<id>/recover
or manually with
echo 1 > /sys/bus/pci/devices/<id>/remove
echo 0 > /sys/bus/pci/slots/<slot>/power
echo 1 > /sys/bus/pci/slots/<slot>/power
clp_disable_fn() / clp_enable_fn() call clp_set_pci_fn() to first
disable and then reenable the function.
When the function is already in the requested state we may be left with
an invalid function handle.
To get a new valid handle we do a clp_list_pci() call. For this we need
both the function ID and function handle in clp_set_pci_fn() so pass the
zdev and get both.
To simplify things also pull setting the refreshed function handle into
clp_set_pci_fn()
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3a99cbb6fa7bca1995586ec2dc21b0368aad4937 ]
In case devlink_dpipe_entry_ctx_prepare() failed, release RTNL that was
previously taken and free the memory allocated by
mlxsw_sp_erif_entry_prepare().
Fixes: 2ba5999f00 ("mlxsw: spectrum: Add Support for erif table entries access")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2f1398291bf35fe027914ae7a9610d8e601fbfde ]
Handle the special case of fuse_readpages() wanting to read the last page
of a hugest file possible and overflowing the end offset in the process.
This is basically to unbreak xfstests:generic/525 and prevent filesystems
from doing bad things with an overflowing offset.
Reported-by: Xiao Yang <ice_yangxiao@163.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6e9826e77249355c09db6ba41cd3f84e89f4b614 ]
Make sure, at build time, that pfn array is big enough to hold a single
page. It happens to be true since the PAGE_SHIFT value at the moment is
20, which is 1M - exactly 256 4K balloon pages.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d6fd41905ec577851734623fb905b1763801f5ef ]
We ran into a confusing problem where an application wasn't checking
return code on close and so user didn't realize that the application
ran out of disk space. log a warning message (once) in these
cases. For example:
[ 8407.391909] Out of space writing to \\oleg-server\small-share
Signed-off-by: Steve French <stfrench@microsoft.com>
Reported-by: Oleg Kravtsov <oleg@tuxera.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c77e9f09143822623dd71a0fdc84331129e97c3a ]
Return -EAGAIN instead of -ENETDOWN to provide a slightly milder
information to user space so that an application will know to retry the
syscall when __I40E_CONFIG_BUSY bit is set on pf->state.
Fixes: b3873a5be757 ("net/i40e: Fix concurrency issues between config flow and XSK")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Link: https://lore.kernel.org/bpf/20200205045834.56795-2-maciej.fijalkowski@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9f198a2ac543eaaf47be275531ad5cbd50db3edf ]
if seq_file .next fuction does not change position index,
read after some lseek can generate unexpected output.
https://bugzilla.kernel.org/show_bug.cgi?id=206283
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 123c23c6a7b7ecd2a3d6060bea1d94019f71fd66 ]
In _nfs42_proc_copy(), 'res->commit_res.verf' is allocated through
kzalloc() if 'args->sync' is true. In the following code, if
'res->synchronous' is false, handle_async_copy() will be invoked. If an
error occurs during the invocation, the following code will not be executed
and the error will be returned . However, the allocated
'res->commit_res.verf' is not deallocated, leading to a memory leak. This
is also true if the invocation of process_copy_commit() returns an error.
To fix the above leaks, redirect the execution to the 'out' label if an
error is encountered.
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1064ad4aeef94f51ca230ac639a9e996fb7867a0 ]
Cull out 0 clocks to avoid a warning in DC.
Bug: https://gitlab.freedesktop.org/drm/amd/issues/963
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4d0a72b66065dd7e274bad6aa450196d42fd8f84 ]
Only send non-0 clocks to DC for validation. This mirrors
what the windows driver does.
Bug: https://gitlab.freedesktop.org/drm/amd/issues/963
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c8ab422553c81a0eb070329c63725df1cd1425bc ]
In brd_init func, rd_nr num of brd_device are firstly allocated
and add in brd_devices, then brd_devices are traversed to add each
brd_device by calling add_disk func. When allocating brd_device,
the disk->first_minor is set to i * max_part, if rd_nr * max_part
is larger than MINORMASK, two different brd_device may have the same
devt, then only one of them can be successfully added.
when rmmod brd.ko, it will cause oops when calling brd_exit.
Follow those steps:
# modprobe brd rd_nr=3 rd_size=102400 max_part=1048576
# rmmod brd
then, the oops will appear.
Oops log:
[ 726.613722] Call trace:
[ 726.614175] kernfs_find_ns+0x24/0x130
[ 726.614852] kernfs_find_and_get_ns+0x44/0x68
[ 726.615749] sysfs_remove_group+0x38/0xb0
[ 726.616520] blk_trace_remove_sysfs+0x1c/0x28
[ 726.617320] blk_unregister_queue+0x98/0x100
[ 726.618105] del_gendisk+0x144/0x2b8
[ 726.618759] brd_exit+0x68/0x560 [brd]
[ 726.619501] __arm64_sys_delete_module+0x19c/0x2a0
[ 726.620384] el0_svc_common+0x78/0x130
[ 726.621057] el0_svc_handler+0x38/0x78
[ 726.621738] el0_svc+0x8/0xc
[ 726.622259] Code: aa0203f6 aa0103f7 aa1e03e0 d503201f (7940e260)
Here, we add brd_check_and_reset_par func to check and limit max_part par.
--
V5->V6:
- remove useless code
V4->V5:(suggested by Ming Lei)
- make sure max_part is not larger than DISK_MAX_PARTS
V3->V4:(suggested by Ming Lei)
- remove useless change
- add one limit of max_part
V2->V3: (suggested by Ming Lei)
- clear .minors when running out of consecutive minor space in brd_alloc
- remove limit of rd_nr
V1->V2:
- add more checks in brd_check_par_valid as suggested by Ming Lei.
Signed-off-by: Zhiqiang Liu <liuzhiqiang26@huawei.com>
Reviewed-by: Bob Liu <bob.liu@oracle.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 061d2c1d593076424c910cb1b64ecdb5c9a6923f ]
In case the start + cache size is more than the max int the
start overflows.
Prevent the same.
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 27796d03c9c4b2b937ed4cc2b10f21559ad5a8c9 ]
Without this the symbol will not actually end up in .config files.
Link: http://lkml.kernel.org/r/20200116064531.483522-6-aneesh.kumar@linux.ibm.com
Fixes: a30e32bd79 ("asm-generic/tlb: Provide generic tlb_flush() based on flush_tlb_mm()")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 12d47f0ea5e0aa63f19ba618da55a7c67850ca10 ]
Fix a kernel panic by checking that the sta is not NULL.
This could happen during a reconfig flow, as mac80211 moves the sta
between all the states without really checking if the previous state was
successfully set. So, if for some reason we failed to add back the
station, subsequent calls to sta_state() callback will be done when the
station is NULL. This would result in a following panic:
BUG: unable to handle kernel NULL pointer dereference at
0000000000000040
IP: iwl_mvm_cfg_he_sta+0xfc/0x690 [iwlmvm]
[..]
Call Trace:
iwl_mvm_mac_sta_state+0x629/0x6f0 [iwlmvm]
drv_sta_state+0xf4/0x950 [mac80211]
ieee80211_reconfig+0xa12/0x2180 [mac80211]
ieee80211_restart_work+0xbb/0xe0 [mac80211]
process_one_work+0x1e2/0x610
worker_thread+0x4d/0x3e0
[..]
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
