On Lahaina platform it is seen that WBM IDLE ring init is failing,
Write to WBM_IDLE link ring LSB write is failing.
Add temporary WAR to do back to back write of WBM IDLE link ring
LSB address config register.
Change-Id: I7f72abb7226e1d7beee127ebda88488172147f21
CRs-Fixed: 2647762
The delayed register write for srngs will have
the value of the HP/TP at the time of enqueue,
but the final value which is written to the
hp_addr/tp_addr will be determined based on
HP/TP value at the time of dequeue of the
entry for a particular srng.
Hence to know what was the exact value which
was written to the HP/TP address, add one more
element in the delayed register write entry.
This element will contain the value of the
HP/TP which was actually written to the address.
Change-Id: I73e592611fa50b106da1deda06b839cf4fbe2126
CRs-Fixed: 2658331
The active vdev bitmap used in serialization is
32bits and it is per pdev.
But in cases, where there can be more than 32 vaps
configured, the bit positions of a 32bit bitmap cannot
be used to indicate the active commands for a vdev whose
id is more than 31.
So, we need to increase active cmd vdev bitmap to support
for max number of vdev ids that is possible for a pdev.
Considering the vdev id is per psoc scope and can spread
across pdevs, increasing the size of the bitmap to max
vdevs supported per psoc.
CRs-Fixed: 2656046
Change-Id: Ic7728145b208492af218320fa84f35bb1f918aab
The bitmaps used in the driver are defined either as a single
or array of unsigned longs or some other types.
The bitmap variable size is different based on the platform(32/64 bit),
for unsigned long types.
Add support to have a platform agnostic consistent bitmap size
using the Linux provided interface for defining bitmaps.
CRs-Fixed: 2660881
Change-Id: I901778625ef9aaccc994d914c8adf98fbffeb980
The peer rx packets should be flushed when
deleting the peer and its state should be reset
to DISCONNECT, when deleting the peer.
If the state of peer is not set to DISCONNECT,
then the flushing of rx packets for the peer
which is being deleted will call the rx callback
and submit these packet to the stack, which can
cause unwanted behaviour.
This way the UMAC does not need to specifically
call clear peer before deleting the peer.
Change-Id: I3b5a737126350a361d968f6349aef6291b2e3f56
CRs-Fixed: 2659629
For wlan stop modules any pending vdevs flush happens as part
of pdev deinit. If in case of any peer ref count leak, driver
is stuck in dp_pdev_flush_pending_vdevs as the vdev is not getting
cleaned up. This is due to vdev's peer is not deleted. So during
force flush of vdev's peers set the ref count to one before peer
unmap handler.
Change-Id: Ie54996522eac870d00ea7a75c8db40a1cce09d2d
CRs-Fixed: 2658032
If tx capture, sniffer are not enabled, mgmt nbuf is freed.
It is causing use-after-free in bpr enabled case
Added change to free only when bpr is disabled
Change-Id: Ia56254ca371cd9fbc21f5d58fac7ea96792d0bee
CRs-Fixed: 2663098
For 4 core CPU system, Tx access can be made lockless by associating
one Tx ring per CPU. Three Tx DATA rings and one SW2TX command ring
can be used for sending data to Tx.
Change-Id: I6e38cad52dffa4e46ff2b736cd6b949d061fa2a4
Add a interface to write string of CFR stopping, and indicate to
userspace that CFR has stopped.
Change-Id: Ib1d63cb75cd311b367d5d8100c5c4eb92980392d
CRs-Fixed: 2659373
FW requires to receive WMI_CFR_CAPTURE_FILTER_CMDID with the pdev id
which is based on the working band. It requires srng id when looking
up or releasing DMA address. So add this change to check working band
and set mac id. This is MCL only change.
Change-Id: I763a25b4989607128b2b4c75186eb5bdcd204077
CRs-Fixed: 2641268
CFR uses the number of chainmask and bandwidth from DMA and updates to
userspace.
Change-Id: I8f54cdbfdf77d39f9862848d3cacb61eb4924a05
CRs-Fixed: 2644015
Add rate limit for QDF_TRACE_HEX_DUMP API to avoid hex dump
message flood in kmsg and driver log.
Change-Id: I34fa16f3723169a07e66c0c806885c06abc2fa57
CRs-Fixed: 2660367
Invalid peer handler does double free of nbuf and leads to crash.
To avoid this make nbuf->next NULL before calling dp_rx_null_q_desc_handle.
Change-Id: Ia3f92cb5136dbdbfeb1e9cda8a52c474456a4e0c
CRs-Fixed: 2655792
Read ini param 'full_mon_mode' and enable full
monitor mode support for qcn9000
CRs-Fixed: 2655293
Change-Id: I6550765246f6541453006fe2db28e01c8e06670c
As part of componentization of packet capture feature
removed cdp ops of packet capture.
Change-Id: Iea07cbdc5782dee58cd1c87377363cc26479464f
CRs-Fixed: 2659439
In wlan_crypto_save_key store igtk def index, bigtk def index and
igtk key type in crypto priv.
Change-Id: I96161a6dd376e7e80f88da00c891d15a5645cfa7
CRs-Fixed: 2661197
Remove lock to access REO destination rings because 4 rings are
accessed in 4 individual cores.
Change-Id: Ia3f92cc5136dbdbeea1e9cda8d52b474356a3e1a
CRs-Fixed: 2660901
Change 6ghz channel sorting logic to descending order
and add the chan_freq to chan_info struct
Change-Id: I243768942823c6fd5a5146627e875ff37847d92b
CRs-Fixed: 2650698
In pdev deinit path tx_desc->vdev can be NULL
in dp_tx_comp_free_buf use soc->osdev to unmap instead
of vdev
Change-Id: I8b390656d482fed3c8c85d928860222a88325ca1
Add chip type for QCA6490, and CFR component will indicate chip type
to user space.
Change-Id: Ia3e95e06c8cc86bc30b81906f62f3821606a38f7
CRs-Fixed: 2659553
Currently there are cases where the CE status ring
head pointer is incremented, but the corresponding
buffer in the CE DST ring has nbytes as zero. This
can be a possible case where the head pointer was
updated before the DMA copy was completed and before
the nbytes could be updated with the number of bytes
copied to the CE DST ring buffer.In such cases we
haven't processed this entry, and hence should not
increment the tail pointer.
Hence we do not increment the tail pointer if
there was no data in the CE DST ring. Also
enable the logging of CE STATUS RING REAP
even if the CE DST reap was not successful.
This will help identify the cases where the reap
was not successful because of nbytes being zero.
In Success case, the CE desc history will show
STATUS_RING_REAP and DST_RING_REAP events.
In nbytes=0 failure case, the CE desc history will
show STATUS_RING_REAP event with HP moving ahead,
but the TP will not have moved.
Change-Id: Ibc3145142b6c88f6da3e12748d0ac8090486e8e3
CRs-Fixed: 2657285
Move is_initial_mem_debug_disabled under MEMORY_DEBUG flag as it
does not depend on NBUF_MEMORY_DEBUG to fix un-usued symbol error
when MEMORY_DEBUG is disable and NBUF_MEMORY_DEBUG is enable.
Change-Id: Idb54544321a0fd9dda7a6e98d91d22d01be50e41
Populate number of Spectral detectors per BW in the
Spectral capability vendor command response.
CRs-Fixed: 2659587
Change-Id: I2eba5df02a5f70556d65e689aece1f0fbd8bba93
Add an attribute QCA_WLAN_VENDOR_ATTR_SPECTRAL_SCAN_CONFIG_FREQUENCY_2
for describing the secondary 80 MHz span of agile spectral scan.
CRs-Fixed: 2659496
Change-Id: I751513cb248c42dd7c59d7d979fc571459e48ad1
1. Remove absolute paths to cfr header file.
2. Exclusion of CFR header file is handled in Kbuild,
remove compile flag within file.
Change-Id: I6abdce56716ba17481ccc2e1942754203063e3ad
CRs-Fixed: 2649714
1. MAC does not really consider the expect TA and the
expect RA when the expect TA mask and expect RA mask is 0.
Basically, it checks for the subtype, bandwidth and NSS
as the filter criteria.
2. In the other scenario, if the RA matches with expect
RA and TA matches with expect TA then it does not really
consider the expect TA MASK and expect RA MASK.
With the current default config, since the expect address
mask is 00:00:00:00:00:00 it falls under case 1 and it is
written based on the MAC recipe.
But actual MAC logic is different from what is mentioned
in the recipe. MAC works on below logic:
TA & TA MASK = Expect TA & expect TA mask
RA & RA MASK = Expect RA & expect RA mask
As an additional precaution, we need to modify default
subtype as 0 so that if user enables any group by mistake
and does not give any input for the other RCC
configurations, we can block the RCC to capture CFR data.
Change-Id: I759e8812e4ef0e77f773d0d445134e62d9e8a753
CRs-Fixed: 2649714
FW may limit the interval and duration during which HW may
use user provided values and attempt to capture.
These values range from 1 us to roughly 16.8 sec.
Max value is 0xFFFFFF which is 16.777215 sec.
Add check to make sure that capture duration cannot exceed
capture interval.
Change-Id: I7aff00a1024d6d8ba9885cda3e1c36dd08c95f9e
CRs-Fixed: 2649714
Protect access to cfr lookup table, since error handling
mechanism attempts to cleanup CFR entries in timer context,
this leads to contention between bottom-half and timer.
Change-Id: I32a095fc82545ab117ab43a81ef8a3a5602741fc
CRs-Fixed: 2649714
1. Clear cfr_timer_enable flag during wifi down
2. Similar to one-shot capture, report RSSI in metadata for RCC.
Convert SNR in rxtlv to RSSI.
Change-Id: I1802ea25b306faf06be52da60edb5050ff1bea9c
CRs-Fixed: 2649714
TA retrieved from freeze TLV was being over-written by macaddr
from AST search during RXTLV processing.
MACADDR from AST search is essential only for MU PPDUs.
Change-Id: I1a7c46dd11b6cae6049ae70046af849228ba3b47
CRs-Fixed: 2649714
Since netdevice name retrieval is tied to OS,
move it to qdf OS layer instead of doing it
inside CFR ucfg layer.
Change-Id: Ia9dcbdf56bcb36a1f0788be9964ea87fdf5beb3f
CRs-Fixed: 2643682
During the packet transfer from HOST to Transmit Classifier Layer,
if NAWDS is enabled, send peer id of NAWDS peer.
This is to avoid re-injection from FW to Host.
Change-Id: Ic0e5c46fff3bbe1a3e8ea3a01986478c925452f5
CRs-Fixed: 2628703
Update QCA_NAPI_DEF_SCALE_BIN_SHIFT for defconfig builds to
the same value as the perf build.
Move the WLAN ext irqs to gold cores for defconfig builds.
Disable cpu isolation before moving the IRQs to gold cores.
Add the ability to move IRQs to gold cores when the cpus
hotplug in.
Change-Id: I4cfecd02a1a2200dc99adee9a324b90c877c13fd
CRs-Fixed: 2638820
The dp_should_timer_irq_yield should return the
status DP_TIMER_NO_YIELD when no yield condition
has been met. Currently its returning the status
DP_TIMER_TIME_EXHAUST which causes the timer to yield
before the expected time.
Fix the return status from dp_should_timer_irq_yield
Change-Id: Ia57aae635789f34e79285c27f5312ea38e07df5c
CRs-Fixed: 2659900
Whether the firmware supports 6ghz channels, needs to be known
before pdev is created. Therefore move the check for 6ghz wmi
service support to psoc..
Change-Id: Iad7717225c49f6c95988f5ac81c7ee405b7c2c9e
CRs-Fixed: 2658111
