Packetdump invokes legacy data path API directly without
considering underlying HW:
1. ol_register_packetdump_callback
2. ol_deregister_packetdump_callback
Global pointer pdev_txrx_ctx will be casted to struct ol_txrx_pdev_t
always even Lithium (use struct dp_pdev) underlying, that leads to
struct dp_pdev be overwritten unexpectly.
Wrap with cdp API to avoid.
About packet-dump feature:
It is one debug feature/requirement for Android N, to track/dump
TX/RX data/mgmt. packets during connection. This enhancement can help
in debugging connection related issues.
This change only touches its data packet callback register API.
Change-Id: Ie63fd2dfa909f89741ccf0c5131f6d3305093a3e
CRs-Fixed: 2366334
Packetdump invokes legacy data path API directly without
considering underlying HW:
1. ol_register_packetdump_callback
2. ol_deregister_packetdump_callback
Global pointer pdev_txrx_ctx will be casted to struct ol_txrx_pdev_t
always even Lithium (use struct dp_pdev) underlying, and overwrite
struct dp_pdev unexpected.
Wrap with cdp API to avoid.
Change-Id: I5c8847ddc51548e8854ba600bec99ce5200dd817
CRs-Fixed: 2366344
Adds support to use bangradarenh command to inject radar on the
secondary segment, if AP is operating in HT80+80 or HT160 mode.
Change-Id: I78ab3d3fcb3ecf5fee274911bf6dc48f74c53818
CRs-Fixed: 2359763
Rename target_if_open() to target_if_init() and target_if_close()
to target_if_deinit() as these handles global target_if
initializations.
Change-Id: I935eb6461f1774043adaa0539b6e8e0ea9824382
CRs-Fixed: 2352015
Local variable is used to store cpumask to send it to
irq_set_affinity_hint and qdf_dev_set_irq_affinity APIs.
This memory is used by the kernel later outside the
current contect resulting in invalid memory access.
Fix this by using global variables to store cpumask.
Change-Id: I086f40bf1b3499d2c2ccb1ce18140b2dc2761d04
CRs-Fixed: 2373548
Currently, the function causes the system false when
tries to release the spinlock because it holds the
spinlock longer than max_hold_time.
Change-Id: I90c78b7d8530cf3d1c224a693ab9f743f669b730
CRs-Fixed: 2371481
Each cmd in serialization list holds a vdev ref by
I8d573ff5a25e6dff928b2708e51ad7b97e292277. When vdev is
destroyed physically, it means vdev ref count is 0, all
serialization cmds of this vdev are released, don't need purge
in vdev destroy handler.
Change-Id: Iea75707c88154e1e3e87369285b82d1288523e22
CRs-Fixed: 2367242
During Zerowait DFS, when radar is hit, the NOL IE element that
is being sent to its uplink is prepared after the precac timer
is turned off, which returns wrong center frequency
information for secondary segment.
This center frequency is used to built the list of subchannels to
be sent to root, which in turn are all 0s.
Reorder the function calls to prepare the IE before the
precac timer is turned off when radar is found so that the
list of subchannels are built properly.
Change-Id: I74e800cbbeb3730c862a72ddbe8f78219592e343
CRs-Fixed: 2373036
When adding stop command to the serialization queue, if the command is
getting added to the pending queue of the vdev and there already existed
another stop command in the same queue, then return already exists as the
return value after the command is enqueued.
This to avoid notifying the vdev state machine with down event multiple
times though the command already in the pending queue would have notified.
Change-Id: I1830251c6b6c1fa2860f17a3ea8a869e8a3c87ff
CRs-Fixed: 2372563
When the command is released from the queue, it is added back to the global
pool. Reset the status flag of the command before releasing it back to the
global pool.
Change-Id: I3e51fc6aa0ffc0dafe87b838a5a256fc65d12d09
CRs-Fixed: 2372562
In the current implementation, if there are any active commands
in the vdev queues then on vdev destroy we remove the commands from
the respective queue and return the command to the global pool.
We should also stop the timers for the corresponding active commands,
otherwise the timeout cb may be called after the destroy is executed.
Change-Id: I51a1049e952073d83b5caee3835e4f9adca2bb9e
CRs-Fixed: 2365411
Per the Linux coding style both mixed-case names and so-called
Hungarian notation are frowned upon, therefore replace the identifier
pAddPeriodicTxPtrnParams everywhere it occurs.
Change-Id: Id80fc4cd22a8e4af125f01b937e03eea0b898283
CRs-Fixed: 2371906
This change will resolve displaying NSS value
in stats in case of HT. And also it will give
proper NSS value to calculate rate value. Modify MCS
value to match with Tx stats from firmware.
Also retain original MCS value to use in radiotap code
for HT case.
Change-Id: I4dad068262a5e9188a5935db6b2cbf8d14138e7e
Add INI support to disable spectral feature and do not process the spectral
user commands if spectral feature is disabled.
Change-Id: Id353131675454652d59fd5d5f8fd3d732a07b777
Acked-by: Shashikala Prabhu <pshashik@codeaurora.org>
CRs-Fixed: 2343947
Using both structure wmi_tdls_params and tdls_info if TDLS component
sets FW states, which will cause memory corruption potentially. Use
enum wmi_tdls_state as type of tdls state.
Change-Id: Ia1e78a5c6d8aee9ab5166c0704dd7827f42c2457
CRs-Fixed: 2372452
Disable adaptive dwell time for scans in not connected state to
optimize host scans for fast connection.
Change-Id: I28f762c3ee44ffc20a7565ccc1d8e40f16aedb4e
CRs-Fixed: 2357888
wmi_unified_bcn_buf_ll_cmd in wmi_unified.h had compilation flag
CONFIG_MCL. To get rid of the compilation flag, a separate header
file is created
Change-Id: I0bbcdf749f461f6880aacc1e3ef4e8e8fdc08ff6
CRs-Fixed: 2366773
Two new WCNSS_qcom.ini values "roam_score_delta" and
"roam_trigger_bitmap" are introduced. These values are sent to
firmware over the WMI command WMI_ROAM_AP_PROFILE over the
structure wmi_roam_cnd_scoring_param. The values to this
structure are populated from struct scoring_params.
Add roam_score_delta and roam_trigger_bitmap in scoring_param.
Populate these values from roam request to the structure
wmi_roam_cnd_scoring_param to be sent over the wmi command.
Change-Id: I012867e60ddf18a276250ef3bd27015f191d8a6a
CRs-Fixed: 2368263
Two new WCNSS_qcom.ini values "btm_validity_timer" and
"disassoc_timer" are introduced. These values are sent to
firmware over the structures wmi_roam_offload_tlv_param and
wmi_btm_config_fixed_param respectively. The values to this
structure are populated from struct roam_offload_scan_params.
Add rct_validity_timer in roam_offload_scan_params.
Populate these values from roam request to the structure
roam_offload_scan_params to be sent over the wmi command.
Change-Id: I6130e9966d520169b0f74b9726d35aa4fef6d81d
CRs-Fixed: 2369040
The firmware sends a new wmi event WMI_ROAM_BLACKLIST_EVENTID
to send the blacklist AP list.
Change-Id: I04fab853efbded48285ac063bb39c64f342c229b
CRs-Fixed: 2369107
Define WLAN_AKM_SUITE_FT_8021X and WLAN_AKM_SUITE_FT_PSK for kernel version
less then 4.14.
Change-Id: Id5518511bc4f639fff6d1e20bcf0aad973d9ab46
CRs-Fixed: 2362888
Add changes to send bss_load_bss_sample_time over the wmi
command WMI_ROAM_BSS_LOAD_CONFIG_CMDID.
Change-Id: Iab882f0474071458ed8b8876d8edda987b76e94d
CRs-Fixed: 2372167
Populate the load bss trigger configuration values based on the
ini values and send them to firmware.
Add wmi changes to send bss load trigger config to firmware.
Change-Id: Ib2e21904bc7b8d87e5f51824d2694b90a3ac53f2
CRs-Fixed: 2367773
Stats are updated periodically and
are categorized to soc, pdev, and
vdev
While the stats are getting updated
and if pdev, or vdev gets detached
in the same time, the stats handlers
will deference a NULL pointer
Hence Add basic sanity checks to DP
layer for soc, pdev and vdev inside
stat handlers
Change-Id: Ic4919b9c205679e1d6e7c571c577339be65c1bad
Rename CONFIG_QCN7605 as QCN7605_SUPPORT since QCN7605_SUPPORT
is already present/being used.
Change-Id: I1739bf86a9eb02aa6920f06bc929f686a5fa8f54
CRs-Fixed: 2369622
The following changes are made on APL9 regdomain:
* Include channel 149 in the supported channel list.
* Change the regulatory tx power for 5150-5250 frequency range to 23dBm.
Change-Id: I2bb01acbf60d814a2bc2c35a86f7f2c30583aad9
CRs-Fixed: 2366774
Cleaning up cmn code by getting rid of CONFIG_MCL
in file utils/fwlog/dbglog_host.h.
Change-Id: I01cc1805ef2a2d57935216da79a4294a89be1411
CRs-Fixed: 2359889
Add QDF abstraction macro to read ipa wdi out structure param
is over gsi member.
Change-Id: I48c848b432168cba46ded985023291077488b2be
CRs-Fixed: 2367310
Remove unused mlme function to get dfs object and replace
it with the dfs equivalent.
Change-Id: I3ffadb77072fa119957469e0bf97fa4a80f99ac9
CRs-Fixed: 2368988
Add host support for db2dbm RSSI changes. Firmware
indicates this capability when underlying hardware
has RSSI reporting feature. Based on this capability
host will know if firmware sends SNR or RSSI. If no
capablity is present then host will convert SNR to
rssi using a fixed offset of -96. If capability is
present host will directly use the rssi as it is.
Change-Id: I9058f16c6280d466feb96cf88a8a0d8cd7b02032
CRs-Fixed: 2364025
Currently we are printing one single big print to dump the RX TLVS. This
is causing truncation at the QDF_TRACE level, which can accommodate only
512 bytes or so right now. Split the RX TLV print, so that it can fit
int the QDF buffer.
CRs-Fixed: 2370080
Change-Id: I1385ab0dfe2a52e34132487ac55973e291d84db5
Spectral HW time stamp gets reset when a reset happens in
within target. This can potentially result in unpredictable
behaviour during classification. To mitigate this calculated
offset is added to the time stamp value in the FFT report.
HT = Spectral HW timer
AT = Actual time stamp in spectral report
CF = Time stamp correction factor
CT = Corrected time stamp
L = Time stamp in the last FFT report before reset
F = Time stamp in the first FFT report after reset
D = Time gap between the last spectral report before reset
and the end of reset(This is provided by FW via direct
DMA framework)
***Target Reset***
^
|
|<---D---->| time line--->
_______________________________________________________
^ ^ ^ ^
| | | |
HT --> 0 L 0 F
AT --> 0 L F
CF --> 0 0 (L+D)
CT --> 0 L (F+L+D)
Spectral driver corrects the time stamp received from target
using the following formula and sends upwards.
CT(Corrected time stamp) = AT(Actual time stamp) +
CF(Correction Factor)
Calculation of Correction factor (CF):-
---------------------------------------
Initialization : CF = 0
CF += (L + D) (Done only for the first spectral report after reset)
This scheme takes care of the wrap around in the 32 bit time stamp
which would have occurred if the timer was not restarted due to
target reset.
CRs-Fixed: 2356382 2355486
Change-Id: I17b55d39eb91eb03b867bcfddaf3eb03d1fc5d1b
Change the QDF log level during update peer statistics. It is not
necessary because during roaming it is possible the peer is not
there when we update statistics. Also use QDF_TRACE_RL to replace
QDF_TRACE to avoid massive log prints.
CRs-Fixed: 2353709
Change-Id: I2896e6874b2802ee1d8bf05c6daf064e1953a5d5
Add peer_id and msdu_len in qdf_nbuf_cb these
fields are used for lithium rx performance
optimization
Change-Id: Iba291812397a5e7648953c2dc1b2c18a5c5a18af
Ownership of hostscan_adaptive_dwell_mode_no_conn is changed from HDD to
scan module. So scan module doesn't have to rely on HDD to obtain the
INI setting.
CRs-Fixed: 2357888
Change-Id: If3c3d93f0e1763e778eb6e3e70e23231fb01a67e
Add a missing NULL check for peer object in rx_da_learn API
Also add missing elements in pdev_stats_cmn_tlv structure.
CRs-Fixed: 2357352
Change-Id: Ie54fd0a6a45f00d60420c391098f22b0097de3ac
dp_reo_desc_free function can be executed in SIRQ context, so it
should not be expected that INFO printing which might cause locks
holding too long.
CRs-Fixed: 2367454
Change-Id: Ic77126fa62329547494ec6b672111c6183fadac2
Component level logging functions of Spectral module are calling
vprintk internally, change them to use QDF trace APIs
so that Spectral logging can be controlled at run time from qdf_cv_lvl.
Change-Id: I8244a29918718c70a8f384ea8df2d5c2ad5bfad2
CRs-Fixed: 2369842
