tx_desc allocation failures are observed when running roaming scenarios
on Napier x86, where roaming offload is disabled (non-LFR3) and during
roaming reassociation is sent by DUT. With Lithium_DP, tx_desc are
pre-allocated within flow pool and flow pool map and unmap are currently
hooked in policy manager when connection table is updated.
In roaming scenario, flow pool is created when STA is associated with old
AP. But new flow pool is not created but is reused with old AP since same
flow pool id is passed from protocol stack. When old AP is removed from
policy manager connection table, flow pool is thus unmapped which leads to
EAPOL packets transmit failure due to unavailability of tx desc.
Fix is to increate pool_create_cnt to avoid flow pool being unmapped.
Change-Id: Ia912c1d7fe8319bece00869a9a47c8a760b17e2f
CRs-Fixed: 2287284
Add frequency range CHAN_5735_5835_8 which has dfs flag set. For ETSI12
regdomain use this freq range instead of CHAN_5735_5835_1.
Change-Id: I40f659c2a92b902e26bd71fc713e00b57a13418d
CRs-Fixed: 2290773
Currently mtrace messages are getting recorded in circular
queue but are not getting used for DIAG Infrastructure.
Add support to print the mtrace messages on DIAG infrastructure in
format such that there will be two 32 bit fields printed on the
logs. These two fields will be constructed as explained below:
1. First field will be constructed using below bit positions:
a. Bit 0 – 14 ( 15 Bits Lsb ) will contain the messageIDs
b. The bit 15-22 will represent the destination module,
and the 23-30 will represent the source module which is
initiating the message.
c. Bit 31 will represent whether the message is from host
or from FW. If bit is 0, it indicates the message is
from host and if it is 1 it indicates the message is
from FW.
2. Second field will be constructed using below bit positions:
a. First 16 bits (From LSB )will be used for counter.
b. Next 8 bits would be the vdev id.
c. Remaining 8 bits are reserved for future use.
Here counter is static unsigned 16 bit value which will be
used to keep track of number of logs given to QXDM and out of
these logs how many logs have been missed.
Change-Id: I4cec762ef17222d6adda9fd3e283c101afb92955
CRs-Fixed: 2290898
Add a new logging trace level QDF_TRACE_LEVEL_TRACE for
automation scripts to process the logging.
A new logging Infrastructure is to be added where the newly
added logging level QDF_TRACE_LEVEL_TRACE will be used to
log in specific format and these logs will be used by
post processing script to figure out right FA or to figure
the module from where the path deviated. It will help out CST
to figure out the right FA if there are any issues in the driver.
Change-Id: I7b5772026e4fc2f8e5205663e9150c861b69fdfc
CRs-Fixed: 2290893
Add new fields such as agc_total_gain, sscan_gainchange
to the Spectral SAMP message.
CRs-Fixed: 2291499
Change-Id: Ia6a9fd742c2ee98fd9d7102f0d8c66dcd22a1614
If target only support regdb offload but not
support 11d scan offload, the set country code
wmi command needs to be sent to firmware.
Change-Id: Ide69c3f08a14560789f6e53a6013861843b5e974
CRs-Fixed: 2280170
Change "qcacmn: Add revised extscan start hotlist monitor API" (Change
Id Ie705f2462c7d5befa691f1ab57293e55ab68e3e2) recently added a revised
"start hotlist" handler. The only known client of the existing
interface was converted to use the new interface with change
"qcacld-3.0: Refine the extscan start BSSID hotlist logic" (Change-Id
I4d9f982177bc61a751ba0e7437fe55482dfd2723) so remove the now obsolete
interface.
Change-Id: I6e43170daa3ed2d932f1f2fa6717ea230a37ea8b
CRs-Fixed: 2294278
pe sessionId should not be used as vdevId.Add
vdevId field to aggr_add_ts_param and use it
in wmi command.
Change-Id: Id021dda35a32f7870277d405c85a0878d7baa3f3
CRs-Fixed: 2293867
During freeing up of hif_config_de resources, the ce tasklet workers
are deinitialized after the ce cleanup is done. This causes a race
condition between shutdown and ce tasklet in case rescheduling of ce
taslket is done.
Deinitialize the taslket workers before ce structures are deinitialized.
Change-Id: I708711174cf818c0d15ef92c881c8d8aee49e9f1
CRs-Fixed: 2283272
Currently there is no module ID to represent the FW, In new
logging infrastructure messages going from host to FW also
needs to be represented.
Add a new module id QDF_MODULE_ID_TARGET to represent firmware as
a module.
Change-Id: I0551455f2867633abed88037e414deaec1c11921
CRs-Fixed: 2290895
Fix race condition on setting irq_requested to true by releasing
spin lock irq_save and taking it again. This will update the irq
flags to the irqs enabled after taking the lock.
Change-Id: Ic68847994fd053b8061d35a346ee65a495c7b725
CRs-Fixed: 2293004
Update NAN module to support INI configuration params based
on converged CFG component.
Change-Id: I2253daf8cbbce6d2afa28c5834179f21c2b76660
CRs-fixed: 2290357
Define new wifi test config attribute to override the MU EDCA
params with defaults in the driver.
Change-Id: Ic12e322a82a558a5b01e13d6d5e288eb6933c1cc
CRs-Fixed: 2290381
Add the following fields in Radiotap header:
Antenna noise (in dBM)
Vendor Namespace containing the following information
->L_SIG_A
->Device_ID
->L_SIG_B
->PPDU_START_TIMESTAMP
CRs-Fixed: 2285143
Change-Id: I977be73778ab27383f12214c73b56c9b80d9f02d
Add change for disconnected peer stats ,
will remove from bss_peer
and will store in vdev, bss peer will have only multicast
stats for connected and disconnected peer.
Change-Id: Id294d1f3218dbfabcc252bac04f1a3e5f543a247
CRs-Fixed: 2290723
Currently aggregate vdev/pdev is missing nawds mcast drop
counter, add nawds mcast drop counter from peer
Change-Id: If1e2296c30cfcb5689449c8e23317282e5dce1c6
Clean up WMI component prints by correcting trace levels for
regularly occurring prints and removing newlines from converged
print APIs since qdf_trace_msg appends them by default.
Change-Id: Ie375e6fda2943f5f2b7287da4374ef9d7470d593
CRs-Fixed: 2243843
Clean up hif and htc component prints by correcting trace levels
for regularly occurring prints and removing newlines from converged
print APIs since qdf_trace_msg appends them by default.
Change-Id: I45b1bbe7b16ab7fb8e229b59a094c7382561d658
CRs-Fixed: 2243843
Clean up datapath component prints by correcting trace levels for
regularly occurring prints and removing newlines from converged
print APIs since qdf_trace_msh appends them by default.
Change-Id: Ie8fe319fcb737720f7400a165e134b6a18bd15b5
CRs-Fixed: 2243843
Clean up spectral, tif and umac component prints by correcting trace
levels for regularly occurring prints and removing newlines from
converged print APIs since qdf_trace_msg appends them by default.
Change-Id: Ib10f1b1c54ecbcb9f4076be7c2c4708359d488e0
CRs-Fixed: 2243843
Move all qdf_print from printk to qdf_trace_msg so that trace level
management can be carried out at runtime
In addition to the above, change contains removal of newline
escape characters from the format string of the converged
print APIs since qdf_trace_msg appends them by default.
Change-Id: I18cd06400bb9747761bbd86bfb38fe6d06106729
CRs-Fixed: 2243843
Add new target type for qca8074v2 and extend target
type checks of QCA8074 for QCA8074V2.
Change-Id: Ib3ff4505e2057fc843b492b9720004dcac042a65
CRs-Fixed: 2292271
TWT requester/responder capability is reported by FW in service bitmap.
Based on this support set soc's extcap feature bit. This is used while
adding extended capabilities IE to set TWT REQ/RSP bits in IE.
Change-Id: I304e9fa4dc32bd3c2f47901bc34438cb188d138a
CRs-Fixed: 2290026
WMI_PEER_TWT_REQ and WMI_PEER_TWT_RESP flags are introduced in peer
flags sent to FW in PEER_ASSOC_CMD. Add corresponding flags in host
structure to indicate peer's support for TWT requester and TWT
responder.
Change-Id: Ic5edb594a95b255fe8ce1091d96c4d886b4d6170
CRs-Fixed: 2290026
Duplicate stats buffer in the callback so that all
allocations get freed by its owner, this will avoid
memory leak issue because of race condition between
umac and upper layer.
Change-Id: Id18d75eb9adc46a6147634eb5b1e0babe32c7c37
CRs-Fixed: 2289355
Add WMI support for new 1x1 connect with 1 Tx/Rx Chain action OUI to be
parsed and sent to the FW.
Change-Id: I077eccb6fab0684d1bc0ec63745de728bfd1a868
CRs-Fixed: 2264328
There are some particular PPDUs which have preamble only:
* NDP frames
* TB_PPDU frames
Add support to the above frames.
Change-Id: I7022433d3765575eaf28d7baf3a11e8b6ce13890
CRs-Fixed: 2275161
Alter the wbuf length based on the scan_offset_time set in
the host to FW. This will avoid sending incorrect payload
to the FW.
Change-Id: I0033dcab7e38fe7f107180294cb3cbaaf0c9d45e
CRs-Fixed: 2134748
When STA role is coexisting with other sessions(P2P, SAP or IBSS),
WAPI encryption mode is not allowed.
Add a new API to check if the connection/start request should
be rejected when:
1) A STA with WAPI encryption is to be connected while there
is at least one concurrent session already running.
2) A new session is to be started while there is already a STA
connection with WAPI encryption enabled.
Change-Id: Idf0d346138eeda339254535f1f7131fda4a5086a
CRs-Fixed: 2290549
When the variable 'false_radar_found' is 1 a set of dfs variables are
supposed to be reset. The reset of the variables are done from within
dfs_radarfound_action_fcc() and dfs_radarfound_action_generic().
However, neither the function dfs_radarfound_action_fcc() nor the
function dfs_radarfound_action_generic() is called when
'false_radar_found' is 1. Therefore, remove resetting of the dfs
variables from the two functions and perform resetting of the
dfs independent of the radar found action.
Change-Id: I120dd8dc7abe13aa9dcaa7a29c10deea06cb8043
CRs-Fixed: 2289775
QDF_DEBUG_PANIC_FL is currently not defined when PANIC_ON_BUG is not
enabled. Add a stub for this case to prevent compilation failures on
non-debug builds.
Change-Id: Id78ac189ad3e3ab096d2e44db5ce01afe599c3bb
CRs-Fixed: 2293402
Currently if ini config dfsPhyerrFilterOffload is set zero on Rome
attached Platform, wlan interface will fail when do interface up.
This makes no sense, since ini configure can be set to zero, also
in this case host can handle the phyerr event instead.
Remove this check in target_if_reg_phyerr_events_dfs2.
Change-Id: Ie33072c8d40925eb550bd820462fc9ab93f0e0c0
CRs-Fixed: 2286382
TWT delete, pause and resume command is upadted by FW to include peer
mac address. Update host implementation to include peer mac in these
commands. Also, resume command is updated to include next_twt_size.
Update resume command for the same.
Change-Id: Iec184d0449b06aaeb9bac558e8cb5322f867e12f
CRs-Fixed: 2279309
1. Allocate and Initialize host and target copy engine configuration
for QCA6390 based products.
2. Setup Copy engine service map for QCA6390.
3. Add conditional compilation flag QCA_WIFI_QCA6390 to support
QCA6390 based products.
Change-Id: Ia4dd4d436b8ecae0e9f91faa0c1fe7dbd14f001f
CRs-Fixed: 2259312
All the dfs timers that are initialized with qdf_timer_init()
must be freed with qdf_timer_free() to avoid the timer leaks.
Change-Id: I5425f0a84d0e252e3a1dc9b835f1b655fe79a691
CRs-Fixed: 2262081
Spectral allocates its nbuf using qdf_nbuf_alloc() and calls
Netlink functions to send the SKB to the application layer.
After sending SKB, the Netlink send functions free the SKB using
dev_kfree_skb(). As a result, QDF nbuf tracker treats this
an SKB leak and panics the system.
To avoid this leak, remove the SKB entry from QDF nbuf debug hash table
by calling qdf_net_buf_debug_release_skb() before handling
the SKB to Netlink send functions.
Change-Id: I62c7046d1481c2a38ef5321410ebca9f5f5f34ed
CRs-Fixed: 2285654
Move rate table API changes from umac to common
data path in order to make the APIs available
throughout the driver.
Change-Id: I1a8aeb3b73ca9df3ab7535c23c8b7e02e6af13de
CRs-Fixed: 2286841
Add NULL check before dereferencing pointer in TKIP demic function
in RX defrag path.
Change-Id: Id13f91409c2891ae833e58e4c9d9d09231682f8a
CRs-Fixed: 2287517
Add support to parse Multiple BSSID element
from Beacon and Probe Response frames and to
update the scan database.
Change-Id: If2c58529c4dca3d3866bd7f905d4a1b6983f468a
CRs-Fixed: 2274579
The driver currently changes the hw_mode based upon
the first candidate found in the scan list, and tries
to connect to it. It may happen that the connection
fails, and the STA then tries to connect to the AP
on same channel as the concurrent adapter.
It would result in hw_mode = DBS, as it is not
updated after connection success/failure.
Also if the first AP channel is in same band as that
of concurrent adapter, and the connection fails,
and the STA tries to connect to an AP in a different
band, this too is not allowed as hw_mode is not DBS
Fix is to change the hw_mode based upon the scan list.
If the driver finds any scan result which may lead to
DBS connection, the hw_mode should be set to DBS.
Once the connection is done or failed, the driver
can check and update the hw_mode again.
Change-Id: I3c186f47dd5528f0af2598bb02c1b7e297d01548
CRs-Fixed: 2290760
We are taking spinlock irqsave before requesting group irqs. But some
times interrupt is coming immediately for the iqr we reuested even before
releasing spinlock irqlock. Since We are trying to take same spin lock
again for disabling interruts in irq handler dead lock is happening.
Fixing the issue by not handling irqs coming during request irq time.
Change-Id: I31484ab64942cc9e318139c522aac3d7cef9b109
CRs-Fixed: 2286715
