HAL REO flush cache command should use block resource only if cache
blocking is requested.
Change-Id: Ie52634cdb9908e4dfa12495dfc3d87a9d5d54c0b
CRs-Fixed: 2057946
Currently max_peer value is hardcoded with DP wlan_cfg. This change adds
a generic interface to obtain a configuration parameter from OL_IF and
store in DP
Change-Id: Id437ab3bcd02fb1cbcbe8b56d55d19780af87066
CRs-Fixed: 2004658
Enable qdf_assert on rx error path to detect corruption issues.
Also add a magic word in rx_desc and compare on rx indications
to detect any corruption issues early in the path
Change-Id: I4df1220f19c891928f9687f40de6f2118b530db2
CRs-Fixed: 2004658
Because of mult-radio changes where we have soc and scn
structures modified we need to address the same for WDS
Change-Id: I63f95d93ac15cdbcdd2b05cb80ce364115e9c16e
In ce_services, check if target type is srng based and access legacy registers
only if it is not, for APIs which are common between legacy and srng-based
targets
Change-Id: I515026cd9b6d14accd4c219c6d03134a36cc3db6
Populating the data structure target_ce_config and target_service_to_cemap
for IPQ8074 platform. These two data structure will be passed to the Q6 target
over QMI later during wifi up for the target side initialization.
CRs-Fixed: 2051118
Change-Id: I5cbe62594b66dab18f01968b9c15d6bfaf93b585
This is a temporary WAR in host for multicast loopback check
until we finalize on exact design, and host or firmware will
take care of this
Change-Id: I4d2d1b0f5d2a78d4c8716740b74c4fee22c28e96
CRs-Fixed: 2039038
Changes to process PHY TLVs from monitor status ring and extract
information required for radiotap header.
Change-Id: I99d642e7506ea797b26dbfac89fd223d1a4c0a55
CRs-Fixed: 2048006
After an error, during the suspend process, previously suspended
components are resumed in reverse order. However, while the suspend case
checks for null handlers before dispatching them, the recovery case does
not. Ensure each resume handler is not null before calling it during
suspend recovery.
Change-Id: I86baa4cba9d2b64871da58427a4657b4b3642cdc
CRs-Fixed: 2057165
Unit-Test suspend needs to be decoupled from the copy engine
implementation in HIF. Split the HIF portion of Unit-Test suspend into
their own files, and clean up naming, etc.
Change-Id: Ic36c5b98c505f6b62ddf94336838a9e53fe8aa78
CRs-Fixed: 2055328
Scan event is updated to NL on a closed
wireless dev.
Add validation check at scan event callback
before updating the scan events to NL.
Change-Id: I979b53ecb481007f663feb927b6e3e96cf73616b
CRs-Fixed: 2057127
scan request queue is accessed in multiple
process contexts so added mutex to scan request
queue. Scan request mutex needs to be acquired
before accessing the scan request queue.
Change-Id: I3f0fe0513d5846f4eaf313848f00f86d29a66e35
CRs-Fixed: 2057127
Add counter stats for number of management frames sent via
wmi and number of completions received.
Change-Id: Id5e72858b1e258b089b170a6d15ba395782645cc
CRs-Fixed: 2060117
Remove the statement nbuf pointing to NULL
during allocation of descriptors as nbuf in rx_desc and next
pointer in dp_rx_desc_list_elem_t share the same address
space and pointing to NULL will not allocate the
rx descriptors.
Change-Id: If4c35202c2489aed1711173b37192f565f7c3d7b
CRs-Fixed: 2061564
The function policy_mgr_decr_active_session() decrements mode
and then remove the session from the pm_conn_connection_info
table after validating vdev.
This change adds a check to validate if the session is present
with specific mode and vdev_id, and then decrement the session.
If not present, then return without doing any change.
Change-Id: If53d7fc9356b2c3bb72b22b228103389396910ce
CRs-Fixed: 2057599
Fix bug in calculation of number of link descriptor entries per bank,
which was causing memory corruptions.
Change-Id: I68a86b8c644a4ef48a45ad5c98b739dced68d81d
CRs-Fixed: 2057893
when we issue cat /proc/interrupts we see wlan_ahb for all
wlan interrupts, now replaced it with proper names to make
it easy to debug
Change-Id: Ib447cce7ffc2844b9f21f579aa50b6a1cfc2e001
Restart SAP with CSA/ECSA when ini variable gWlanMccToSccSwitchMod=3.
Currently ini variable setting gWlanMccToSccSwitchMod=2 was
causing SAP to restart with CSA.
Change-Id: I9a4b68cd154fa63325d146510832c2410f2dc244
CRs-Fixed: 2058567
Bitwise operation on different operands size may lead
to unexpected results, Typecast the constant to
the size of the variable while performing the bitwise
operation.
Change-Id: Ifd9939905cc9df22bb249fa9b1a6a9670cf5f113
CRs-fixed: 2047880
Add prints for all the references held by the components,
for an object, when the object is logically deleted.
The prints will be enabled only when the log
level is set to Debug.
Change-Id: If0a5b97a5e250fe1e5058611026c3c7ae8500359
CRs-Fixed: 2059750
Presently log level of DPTRACE prints is INFO due to
which they are coming in kmsg and causing watchdog bite.
Reduce log level of DPTRACE prints from INFO to DEBUG.
Change-Id: I0124dcc461d3e05541267c8310a43ea3ce0de9af
CRs-Fixed: 2043719
In populate_mac_phy_capability, bounds on an array are checked after
writing to the array. This leads to writing to one past the end of the
array under error conditions. Check the bounds of the array before,
rather than after, writing to it in populate_mac_phy_capability.
Change-Id: I34c7415b8fb925bea5a715214e3aa3ac8a4bacc8
CRs-Fixed: 2059155
Added support for wmi_service_chan_load_info which is newly
added in wmi service bitmap.
Change-Id: I95905ac95c5305f8f84ec512ecf1859955704193
CRs-Fixed: 2057719
Components are required to provide flush callback to scheduler which
gets invoked for all pending commands in scheduler queue when scheduler
thread is going down.
Added flush callback for scan so that command cleanup can be done.
Change-Id: I990a5e14db1498e13a2eeeaa605b44593b8442f1
CRs-Fixed: 2056542
Assert when there is a second registration for any of the psoc
pdev vdev & peer create/destroy handlers.
As seen in IR-224607, where there was a second registration
for psoc create handler which failed,
and the first one was already stored in psoc object,
and when psoc was trying to
call the first handler we see crash.
Change-Id: I7534c7cf2fb9d86329938dcf080362bc719ab582
CRs-Fixed: 2053892
In DFS component the prefix "ic_ " was being used to represent ieee80211
channel related variables. Now use prefix "dfs_ch_" instead of "ic_".
Change-Id: I2f739dc22ad89b7e410c06462876a22c2a615883
CRs-Fixed: 2056957
For Network Listen Offload and Perfered Network Offload, the fast scan
period is multiplied by scan_backoff_multiplier after max cycles have
occurred. Expose scan_backoff_multiplier to consumers of the WMI API,
so this parameter can be configured.
Change-Id: I478fb61cd096d3496205f4ff556e180dabf99b77
CRs-Fixed: 2035201
To fix the following compilation error:
warning: assignment discards ‘const’
qualifier from pointer target type, at:
reg_table->section = ar6320v2_reg_table
in ol_fw.c.
It's because the register table is a
const array, while reg_table->section does
not point to a const.
So add 'const' for 'section'.
Change-Id: Idfef358817241e73d660d2730b74c2ca88e23af1
CRs-Fixed: 2017786
Fix to update same enum wmi_scan_event_type types in switch statement
of extract_vdev_scan_ev_param_tlv()
Change-Id: I4817e57f2a9f309581392faadc1640c05d7fcf2b
CRs-Fixed: 2049514
Read the TAG type from the buffer and call the corresponding
TLV display function
CRs-Fixed: 1114641
Change-Id: Ifec04b87af84229754f598fffa689979ff253f12
The hif_napi_info structure has a dummy netdev included.
The dummy netdev is large. Avoiding unneeded allocation
save 30kb of memory. Dynamically allocating the
hif_napi_info structures also reduces the size of
the contiguous memory needed for the parent structure.
Change-Id: I58044e5b1d0a834b3b6d17f66d6f4b2462873f2a
CRs-Fixed: 2016355
Unlock the tso segment and tso common segment descriptor
pool if there are no descriptors available in the freelist.
Change-Id: I5c09e381769cdaa914e03ced24dccae8aea90897
CRs-Fixed: 2042950
Converged datapath currently uses a polling timer to check for pending
traffic. As part of suspend, pause the polling timer to avoid any
invalid accesses.
Change-Id: I6b4654c6737c08475443d021c04ba9385d084d74
CRs-Fixed: 2047505
Regulatory component needs to listen to vdev messages in order to track
whether a master mode vdev is getting created or destroyed. It is also
used to kick-start the state machine. Also re-run the state machine when
user-space country code is set.
Change-Id: I5112396314a936f84dad2f0e07329f9cb237aa78
CRs-Fixed: 2048784
Add support to send 11d scan start and stop commands to FW and
process the 11d new country update event from FW.
Change-Id: I5c1588cfb5af672cdb5738784de1bd0b83bdbe77
CRs-Fixed: 2048784
Currently Rx LDPC is disabled for STA(2G) connection due to
PHY-B hardware limitation. PHY-A can still support RxLDPC, so
make changes such a way that when ever STA is on 2G band and
current hardware mode is non-dbs then enable the Rx LDPC and if
STA is on 2G band and current hardware mode is dbs then disable the
RX LDPC.
Change-Id: Ib0183fea06619056c61e297d3fcfd82d91775dcd
CRs-Fixed: 2046542
Add a new target_psoc_info structure in the target if layer with the
following members
wmi_handle
target_type
target_version
target_revision
Also update the psoc data member tgt_if_handle to point to target_psoc_info
instead of pointing to WMI handle directly.
Updated all calls to psoc_get_tgt_if_handle to target_if_get_wmi_handle
which inturn calls psoc_get_tgt_if_handle and getting the tgt_if_handle
returns the WMI handle
CRs-Fixed: 2048277
Change-Id: Icb02d5f3c09f7f9bb7eff4d814ef3ce90ddb84bd
