Existing code updates the device clock before cx ipeak logic.
As a result, the cx ipeak takes a decision based on updated
clock rather than the clock at which the device was running.
With the change, device clock is updated after the cx ipeak
is decided.
Change-Id: Icfde29176f8adb3a12c68a611f47b83ca7a8e4a9
Signed-off-by: Vikash Garodia <vgarodia@codeaurora.org>
Signed-off-by: Manikanta Kanamarlapudi <kmanikan@codeaurora.org>
operating rate setting to firmware is not required for decoder.
Change-Id: I271a42822f4a00e95d875400e5ad273697c94ab1
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
Video port resolution can be updated during reconfig event itself.
With this, reconfig height and width was removed. Also relevant
code cleanup was made accordingly.
Change-Id: I4fb38563b4c747eb356f28b7df7e99bd397ff8d1
Signed-off-by: Vikash Garodia <vgarodia@codeaurora.org>
Fix to check f/w logging route based on
local flag variant instead of the global one.
Because route maybe updated when error occurred.
Change-Id: Ia67e138a2b494da465f4868553d33509e70020eb
Signed-off-by: Shi Zhongbo <zhongbos@codeaurora.org>
Requirement stipulates OPB to be writable buffer in split mode.
Erring out in case of read only buffer will help debugging quickly.
Change-Id: I529a97b3d0aa5f82e7cf7d024475338a9d24d1dd
Signed-off-by: Amit Shekhar <ashekhar@codeaurora.org>
Include BRS control id in msm_venc_s_ctrl to add
support to BRS feature.
Change-Id: I05b23e7960128a7b19c582caa5123849ba0cb2b0
Signed-off-by: Akshata Sahukar <asahukar@codeaurora.org>
Cleaning up the debug change - reset max_tries count
from 10000 to 1000.
Change-Id: Id0b142f92b8f45eaa73ab256b7b07bb10f382b80
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
Clean up debug log levels as:
1. Revise VIDC_WARN to VIDC_ERR;
2. Revise VIDC_PROF as VIDC_PERF;
3. Mark some one-time logs, e.g most of logs
in initialization and deinitialization as VIDC_HIGH;
4. Keep VIDC_PKT;
5. All other logs change to VIDC_LOW;
Change-Id: I8fc30f97dc3424da8418aab00e8af074ec8d4ef9
Signed-off-by: Shi Zhongbo <zhongbos@codeaurora.org>
DCVS feature depends on multiple client configurations.
Low latency, thumbnail mode, etc are few among them.
DCVS is now decided before the session starts streaming
i.e after all configuration are inplace.
CRs-Fixed: 2457035
Change-Id: I4a42ae6bafdc852e81794b69d117f5821af4841f
Signed-off-by: Vikash Garodia <vgarodia@codeaurora.org>
Signed-off-by: Chinmay Sawarkar <chinmays@codeaurora.org>
Reverting 2735098 "update video dimensions during port reconfiguration".
Change-Id: I2343cf77d23a564c3346d71dae9cd6377ae9d4e2
Signed-off-by: Shivendra Kakrania <shiven@codeaurora.org>
During a decode session, video output port can go through
reconfiguration. As a result, update the reconfig dimension
when client calls for g_fmt on output port.
Change-Id: Ib5f5866acbdfe107ba4693b8b94498d42f74b312
Signed-off-by: Vikash Garodia <vgarodia@codeaurora.org>
CVP usage is not supported for secure session so do not
enable CVP usage for secure session.
Change-Id: Ifed6daaf706895ebbc56b246134d9775787c7b9d
Signed-off-by: Maheshwar Ajja <majja@codeaurora.org>
Fix to independently control f/w logging route.
Change-Id: I81b57995cb9619d2dee9c43547e86cc3f08d3778
Signed-off-by: Shi Zhongbo <zhongbos@codeaurora.org>
Driver need not support sessions if cumulative
mbpf (macroblocks per frame) is more than platform
specified value. So reject such sessions.
Change-Id: Id12eedfb97783b746c771066d6a556692be84c9f
Signed-off-by: Maheshwar Ajja <majja@codeaurora.org>
For H264 decoder, resolutions with non-multiple of 16 were
calculating less internal buffer size. Updated calculation
to handle such scenarios.
Change-Id: I3c07b843cc898a584aba4c9f26627898a7427fe8
Signed-off-by: Shivendra Kakrania <shiven@codeaurora.org>
Have a chipset specific check to decide the default value of
num of extradata planes. Make num of planes as 2 if
extradata is enabled.
Change-Id: Ie61cac744b4277c024f36bebe795bea2eeced6ae
Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>
Support dynamically config blur resolution to firmware.
Remove unused code for encoder aspect_ratio extradata.
Change-Id: Id2896ab943de4b676338b42bd4993d4057e960ac
Signed-off-by: Qiwei Liu <qiweil@codeaurora.org>
Write queues virtual address to video firmware to use it
for debug purpose to get more information.
Change-Id: I9bf347c3ea279196e7ae40c936f6b3608c94b09b
Signed-off-by: Maheshwar Ajja <majja@codeaurora.org>
Entry field from clock data structure gets initialized with
codec data during state transition from MSM_VIDC_CORE_INIT_DONE
to MSM_VIDC_OPEN. When flush is called before this transaction,
it calls msm_clock_data_reset where mentioned field is getting
accessed, which results in uninitialized data access. Add state
check to ensure the command is handled in right sequence.
Change-Id: Ic98221cbfe465415d89a0e2891f8af65f584f1dc
Signed-off-by: Aniket Masule <amasule@codeaurora.org>
Add platform specific capabilities for lito and use them
in place of firmware capabilities.
Change-Id: I4aca463604444b7ec161f794aac5ddd334c14368
Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>
read bit 21 of register FEATURE_CONFIG1(0x00786008)
to check if fuse is blown to enable lower SKU spec.
Change-Id: I63c5d764aed13c60c0d213aa0fc29dec9edfef3f
Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>
Make a vote call whenever the clock frequency driver computes
crosses a threshold mark. This vote call handles the situation
when many subsystems are in turbo and where a need arises to
throttle the CDSP current.
CRs-Fixed: 2330072
Change-Id: Id10c02749b00fd5a1b1980923c5034648bd35985
Signed-off-by: shubham gupta <shubgupt@codeaurora.org>
Signed-off-by: Manikanta Kanamarlapudi <kmanikan@codeaurora.org>
This change adds support to compile video driver
project for lito.
Change-Id: I398fd8f37cb42bb20f849f17284c377001c14dde
Signed-off-by: Govindaraj Rajagopal <grajagop@codeaurora.org>
