On incremental build, Module.symver used
will be older. Add commands to delete symver
files before recompile starts for audio kernel.
Change-Id: I1e90ad4543a7a06b5940f0a2612d18ed722ecd55
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Assign default channel mapping to three channel voice Tx
devices when the topology specific info cal data is NULL.
Change-Id: Ic9d572edc1d7de07a2bd5e11d82f875368c35854
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
WCD codec must be enumerated before AFE configuration for
some of the features can be sent to DSP. This is because
as part of setting up this configuration, DSP tries to
access some codec register. These register accesses will
fail if codec is not enumerated already.
Add a check for Sound Card online state to confirm that WCD
codec has already enumerated before sending AFE configs.
Change-Id: I0b7e5eb49e4f6c6aee9cb142054e57eae592602b
Signed-off-by: Banajit Goswami <bgoswami@codeaurora.org>
To reduce time of usb-c analog headset detection, reduce
gnd mic swap threshold if usb-c is enabled. Use
existing threshold value otherwise.
CRs-Fixed: 2137077
Change-Id: Ic1d1f3a00c9034caaac45f2c80f018546a69ce59
Signed-off-by: Karthikeyan Mani <kmani@codeaurora.org>
Add support for LDAC encoding in dsp to
enable LDAC encoder over split a2dp path.
CRs-Fixed: 2143086
Change-Id: Ia5ed981f5cd9cc61621d667362585ec7a7e64fa1
Signed-off-by: Preetam Singh Ranawat <apranawat@codeaurora.org>
Channel number of multiaac audio decoder is hard-coded to two during
the configuration. Modify it to accept different channel numbers to
enable 5.1 channel playback.
Change-Id: Ibc33ddc7f2ac810a6a34cdbd7a832e58531dfa4f
Signed-off-by: Xiaoyu Ye <benyxy@codeaurora.org>
Add support of 44.1Khz, 88.2Khz and 96Khz over split-a2dp path.
CRs-Fixed: 2143086
Change-Id: I05e7e947bec250c509f647718323bd208c46b2b2
Signed-off-by: Preetam Singh Ranawat <apranawat@codeaurora.org>
Function "q6asm_set_shared_circ_buff" has a potential scenario that
can cause deadlock due to a missing call to unlock mutex before return.
Avoid this potential deadlock by calling the mutex unlock just before
the return of function "q6asm_set_shared_circ_buff".
Change-Id: Ic454eb5eb57c7616d891277c09e0e3bd37e63cd2
Signed-off-by: Xiaoyu Ye <benyxy@codeaurora.org>
Add routings between LSM FEs and Audio EC Ref, or AFE port for
external Audio EC Ref will not be enabled during DSP SVA.
Change-Id: Ic70ee9479cd384d0226ac0e92a1824f92ec2d946
Signed-off-by: Yunfei Zhang <yunfeiz@codeaurora.og>
Add boundary checks for APR port received from ADSP.
CRs-Fixed: 2143207
Change-Id: I9a7fa39ee223e1859323caa6eb74c1c8a26a041d
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
In SSR init call stop mbhc before initializing mbhc
again, so that usbc analog deregisters the callback
with PMI notifier.
CRs-fixed: 2128532
Change-Id: I329f25172b5cc2d80b93918787f703d89c95062f
Signed-off-by: Karthikeyan Mani <kmani@codeaurora.org>
Based on where the code is synced the driver should allow
both static and dynamic linked compilation.
Also remove __exit for modules loaded from another common
init/exit functions.
Change-Id: Ib58f152002aba3af4446f9bbd9b82c279212bd0a
Signed-off-by: Asish Bhattacharya <asishb@codeaurora.org>
Disable regulator supplies of analog codec during suspend
to reduce power consumption.
CRs-Fixed: 2132296
Change-Id: Ia4b690f01e83e929f8bf4d279454e2ff2e8655a2
Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
File "msm-ds2-dap-config.c" has corresponding dummy functions defined
for all of its functions to avoid compilation error when config flags
"CONFIG_DOLBY_LICENSE" and "CONFIG_DOLBY_DS2" are not selected for a
target. However, this file will not get compiled when these two flags
are not selected. Therefore, those dummy functions are useless and
should be removed.
Change-Id: Ic53a6a9d87d6fd56560af1aec3dc012d6486b42a
Signed-off-by: Xiaoyu Ye <benyxy@codeaurora.org>
Add support for analog mic TX hybrid mode to allow
audio catpure in high performance at the same time
achieving lower power.
CRs-Fixed: 2136385
Change-Id: I08b90a26d6b6e4761ff17dec84bf58f8d437d908
Signed-off-by: Karthikeyan Mani <kmani@codeaurora.org>
Pop sound happens after start playback on HPH when
ultrasound playback on LO4 is enabled.
This is because CnP is sequence dependent and enabling
design blocks in specified order is causing minimum CnP.
CRs-Fixed: 2100346
Change-Id: If10f9013cc1a2aa61fe9c719d3190f2df0b00950
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
Set bus_down_in_recovery flag as soon as possible when
BUS down notification reaches codec driver. This is to
avoid any unwanted slimbus transaction while BUS is still
not recovered.
Change-Id: I77917975372bf51e6aa881cbfc63c479478db375
Signed-off-by: Banajit Goswami <bgoswami@codeaurora.org>
Reset ASRC after audio playback is completed to clear
the FIFO and avoid any noise being generated.
CRs-Fixed: 2129994
Change-Id: Ie45796e1bd68d5a8bd790490a65520358f26b811
Signed-off-by: Walter Yang <yandongy@codeaurora.org>
This reverts commit 40bc50d768038c04f8c1 ("mfd: wcd9xxx-core:
Synchronize codec down and reset calls from slimbus.").
This is to make sure that the dev_up flag is set right
after device_down is called from Slimbus after ADSP SSR.
This flag helps make sure that all read/write calls over
slimbus are blocked until ADSP and Slimbus are fully up
post-SSR.
Change-Id: I5595a23a0b51f2ca392ddfb5773b057204185b54
Signed-off-by: Banajit Goswami <bgoswami@codeaurora.org>
Fix qos value to 300 micro seconds to prevent core
from going into low power mode when low latency
session is active. Also pin this qos to core 1
& core 2 where audio and glink threads are
running to let other cores to go to low power
modes if possible.
Change-Id: I46d356c384fd8d02a9a3b336a113200171bf25a0
Signed-off-by: Haynes Mathew George <hgeorge@codeaurora.org>
Signed-off-by: Dhananjay Kumar <dhakumar@codeaurora.org>
Signed-off-by: Aniket Kumar Lata <alata@codeaurora.org>
Clean up unused FE DAIs and remove duplicate
routings from dapm routing map for MI2S_RX_VOICE
Mixer.
CRs-Fixed: 2001153
Change-Id: I2c9bd1255331d83b1901915259fe61d287f682fc
Signed-off-by: kunleiz <kunleiz@codeaurora.org>
Excess logs are printed in msm_compr_pointer during ADSP SSR.
This causes failure of some interrupts to occur which
results in SSR failure. Logs can be reduced by applying ratelimit.
CRs-Fixed: 2128011
Change-Id: I0d3d82bf52ea307cdf719f97c4907a2d376580c1
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
