WLAN_CONV_CRYPTO_SUPPORTED is a temporary flag which is used for
converged crypto component transition. The transition has already
been done, so cleanup legacy code related to the flag.
Change-Id: I6626a7c9d2ab46cf35ed3593b72c074100954ab8
CRs-fixed: 2593529
During LFR2, new pe session is created before old pe session
deleted, the 2 pe sessions have different pe session id, but
same vdev id.
After change-Id: Ib2e7c72e0636765341792a79aa12968a84ed4879,
When delete old pe session DPH Entry, get pe session by vdev
id instead of pe session id, since both new and old session have
same vdev id, so there is 50% chance to get wrong pe session.
then DPH Entry for STA 1 missing issue happens, then no reassoc
happens.
Fix: When delete old pe session DPH Entry, get pe session by
both vdev id and PE mlm state: eLIM_MLM_WT_DEL_BSS_RSP_STATE.
Change-Id: I207a4291cd26175ea7013fb2f2a0c27865304db2
CRs-Fixed: 2593194
In case of nbuf map failure as part of htc_send_pkt for
tx credit flow disabled endpoints, htc pkt is not put
back in the freelist as return status is not checked
resulting in memory leak.
Fix is to put the htc pkt back in the freelist based on
status returned by htc_send_pkt.
Change-Id: I9173fa3684bc887a360b92d48b689c53a5ad5dbe
CRs-Fixed: 2593729
If gDot11Mode=1 is set to INI, DUT STA will be failed to
connect to 5G AP due to "unknown phymode" included in
vdev start.
Correct the driver to use freq API to identify 5G band
BSS instead of channel API.
And the change forces 11ax mode for 6ghz bss.
Change-Id: I692fa744756490e7125ccd5fd82c15febc19ce68
CRs-Fixed: 2594048
While sending peer_assoc_cmd to FW,add 6ghz HE band capability
if chan_freq is 6ghz.
Change-Id: Icfe886e8c9089d2c58609866e5bc64250c2b6eea
CRs-Fixed: 2591039
When roaming to whitelist SSID, firmware offloads
EAPOL 4-way HS to supplicant. Suppose initially if DUT connects
to SSID1 and then firmware roams to SSID2 then 4-way HS should be
offloaded to supplicant as the firmware doesn't posses the
pre-shared key. When roaming happens between same SSID, then
firmware has PSK and 4-way handshake is taken care by firmware.
But due to issue in roaming code, 4-way HS is offloaded to supplicant
even if roam happens between same SSID. Issue is for ROAM_RSO_STARTED
state in csr_roam_switch_to_rso_start API, there is no handling to send
RSO update if Roaming is already started, due to which
csr_roam_offload_scan is not invoked.
Second issue in roaming code is that RSO is not enabled with the
new SSID2 in firmware. RSO is not enabled as after set key
complete the state of roaming state was not set to
eCSR_NEIGHBOR_ROAM_STATE_INIT. Due to this the SSID in
firmware is still SSID1 and when firmware tries to roam again
to SSID2 it offloads 4-way HS to supplicant instead of handling
within firmware only.
Fix is to update the roam state from eCSR_NEIGHBOR_ROAM_STATE_CONNECTED
to eCSR_NEIGHBOR_ROAM_STATE_INIT in csr_process_roam_sync_callback after
roam synch propagation and also handle ROAM_RSO_STARTED state with
roam_command ROAM_SCAN_OFFLOAD_UPDATE_CFG instead of returing success from
csr_roam_switch_to_rso_start API. Now when supplicant does set key after
4-way HS, roaming is enabled via csr_roam_chk_lnk_set_ctx_rsp->
csr_roam_link_up->csr_neighbor_roam_indicate_connect->
csr_neighbor_roam_info_ctx_init->csr_post_roam_state_change.
Change-Id: I5b81f2e03fe1c7dee2820370d06f4e4f8017f12c
CRs-Fixed: 2587120
wlan_set_vdev_crypto_prarams_from_ie() is defined in qcacmn code but
disabled in Kbuild if CONFIG_CRYPTO_COMPONENT=n, it caused runtime
error if run it.
The #ifdef/#else code should live in common code where define
wlan_set_vdev_crypto_prarams_from_ie(), but there is no motivation
from WIN side to add any code which is not converged.
And it is not appropriate to put it into exist head files, so just
define inlined wrapper functions to cover the not defined case.
Change-Id: I11916703fff860025728f904c8d3906eee1d0037
CRs-Fixed: 2592904
If g_enable_go_force_scc isn't enabled, P2P Go failed to switch
to 2G band when 5G disabled.
Fix: Check whether need switch channel for band restriction
first, check go force scc later.
Change-Id: Icf8de51321debea2806585d47d2bd4fc6486075e
CRs-Fixed: 2594279
Currently the driver does not allow the channels
12 and 13 for SAP ACS because most of the legacy
stations don't scan them and they can cause many
IOT issues. But if they are the only channels left
in the spectrum (for eg. all other channels became
unsafe), then the SAP would fail as the driver did
not consider channel 12-14 for ACS.
Fix is to consider 12-14 for ACS, remove them if
other channels are available and if they are the
only channels available in the spectrum, then start
the SAP on any one of these channels.
Change-Id: I599d0e95e9bdc3aed70d6a515d7a52c39846b6f2
CRs-Fixed: 2576635
In function hdd_ocb_register_sta(), it will call function
cdp_peer_register(soc, (struct cdp_pdev *)pdev, &sta_desc), but pdev
is undeclared.
Change-Id: Ie0341b8ff880c21960a655399378b519fc240631
CRs-Fixed: 2595641
Use user setting for HT mpdu_density if target reported value is
0 which means no restriction.
Change-Id: I4be7d3f4137744e5c9e5bdfc7b50e6c338bd4f79
CRs-Fixed: 2592163
Scenario: Turn on SAP in 2.4ghz in 20Mhz and connect
DUT to it.
Now trigger channel change command and change the SAP
channel to 5ghz in 80Mhz mode.
Issue:-
STA would not go to 80Mhz mode and would remain in 20Mhz
Issue in driver was that it was checking for the ht
supported chan width rather than the self capability.
HT self capability would always be 0 if the connection
is in 20Mhz, and thus the STA would never be able to
ramp up it's BW.
Expectation:
STA should move to 80mhz if it supports 80Mhz bandwidth.
Fix:-
Check for the self capability rather than the ht channel
BW supported.
Change-Id: I546d5edd9881c1013b1a08989cbab3d4ef8fae4d
CRs-Fixed: 2594982
Scenario:
Configure two AP with same SSID and different
passwords, and try to connect to one and then roam to
other.
Observations: The DUT would connect to the second AP
but since the password is different, the EAPOL would
certainly fail, and hence it would result in overall
connection drop and the DUT could not establish a
secure connection with the second AP, and it
disconnected with the previous AP.
Fix is to avoid the AP for some time and try to
connect to other BSSIDs, and still if the EAPOl
fails with the new AP, blacklist it.
Change-Id: Ifb908823cd0eb1873ec7a4b08dffa86e548533fc
CRs-Fixed: 2591467
Currently the BLM does not check the BSSID of
the entry for 0 or broadcast BSSID, and thus
can lead to addition of many entries with such
property.
This would also result in removal of old valid BSSID
entry data, which is essentially required.
Fix is to check the BSSID of the entry for 0
or broadcast, and reject them if not valid.
Change-Id: I2939673a1c4efb1a22e03ffe82121513c071fa4b
CRs-Fixed: 2595331
sta_id is carrying an uninitialized value from the caller
lim_send_sme_ndp_(add/del)_sta_rsp(). So, it's failing the
check for its validity and skipping the first NDP peer creation
/last NDP peer cleanup.
Remove the sta_id check as it's no longer used. So that the NDP
peer creation/cleanup happens properly.
Change-Id: I8daff2bfbc57b7a2fa17a121a5a9dec6975137de
CRs-Fixed: 2594317
Maximum no.of supported vdevs by driver are currently 5. Increase
it to 6 to allow the creation of a separate vdev for NAN.
Change-Id: I1cdc4cc88142bf7a2ad9ab7b8f518453482d2b86
CRs-Fixed: 2592023
Firmware sends vdev id allocated for NAN discovery in NAN enable
response. Validate the same and add corresponding entry to
policy manager.
Change-Id: I5e7426c6739620e05480fb90cecdb8ff156fd4cd
CRs-Fixed: 2592021
Framework might not disable NAN discovery explicitly in some
cases like driver unload. So disable NAN from stop_adapter to
terminate NDPs and NAN discovery properly.
Cleanup the API os_if_process_nan_disable_req() by using the
new API ucfg_disable_nan_discovery().
Change-Id: Ic2c834db44c42a44db902c93f67a887de1b6c2fb
CRs-Fixed: 2594318
Currently, framework issues NAN commands on station interface.
But when connection happens, framework does interface down and
up on the station interface due to MAC randomization. This
terminates all of the NAN operations.
So NAN discovery needs a separate interface to avoid dependency
on the station interface. Create an interface "wifi-aware0"
of type NL80211_IFTYPE_NAN based on the firmware capability
and register to kernel.
Framework issues "IF UP" on the new NAN discovery interface when
it enables NAN. Driver shall create vdev and send VDEV_CREATE
command to firmware for the same. Framework shall issue all
NAN discovery commands on this new interface. Driver shall use
NAN vdev for these NAN operations.
Framework shall do "IF DOWN" once the NAN operations
are done(Ex: up on NAN disable).
Change-Id: Ifd1e1ab5ed64cd97edb00e793214edd2a2365274
CRs-Fixed: 2592020
Kernel needs the below to create NAN interface from driver,
1. Register APIs to the NAN ops. Define dummy APIs as the APIs
are not supported for the current driver design.
2. Define NAN supported bands and 2GHZ is mandatory.
3. Set the iftype NL80211_IFTYPE_NAN in the supported
interface_modes.
Change-Id: I22db31840da2ba0e44b79077a8790b55f1151684
CRs-Fixed: 2592022
Firmware advertises service capability bit NAN_VDEV_SUPPORT for
separate NAN vdev creation. This capability can be used to create
separate interface for NAN discovery and process corresponding
commands from userspace.
Change-Id: I45573c94ee2d966afc1e207c9eefc146ff43320f
CRs-Fixed: 2592019
Testing HSP roaming by issue DRIVER FASTREASSOC
00:24:01:38:b1:a1 6 to trigger manually roaming,
host gave wrong channel number instead of channel freq in
WMI_ROAM_INVOKE_CMDID.
Change-Id: I50157f2aa3447ee7b57a4ddefabd41db0876a50c
CRs-Fixed: 2592946
Function ol_txrx_hl_tdls_flag_reset will call function
ol_txrx_get_vdev_from_vdev_id, it will return NULL vdev
because ol_txrx_hl_tdls_flag_reset is called before
TAILQ_INSERT_TAIL(vdev).
So, move it after TAILQ_INSERT_TAIL(vdev).
Redefinition of 'pld_pcie_register_driver' when
CONFIG_PLD_PCIE_CNSS not defined. For Hastings WHUNT,
HIF_PCI is defined but CONFIG_PLD_PCIE_CNSS is not defined.
So, replace CONFIG_PLD_PCIE_CNSS by HIF_PCI and
CONFIG_PLD_PCIE_FW_SIM.
Change-Id: I05e58516efe6a9a445168a27df9e0cfc9de2e50c
CRs-Fixed: 2589802
After removing alarms, suspend failures are still seen saying that
linux is failing to freeze tasks. This is because there is an error
log message that indicates that at the time of suspend, there was no
active wlan vdev since the DUT is also in airplane mode. Thus, change
the log message level from error to debug.
Change-Id: I7ef0f0d9cf6eab26e53f62a176fc771e862b8ccd
CRs-Fixed: 2594922
Add g_prefer_5g_scc_to_dbs to give higher priority for 5g scc than dbs.
It is bitmap per enum policy_mgr_con_mode.
For example in GO+STA(5G) mode, when TPUT is onfigured as wlan system
preference option, If 5G SCC needs higher priority than dbs, set it as
0x8.
This can make GO have higher TPUT given that STA and ref AP mostly have
low speed at this time. This can improve user experience.
Change-Id: Ib8b4bfeef55d97277843df92d3b82aa7f3b9835d
CRs-Fixed: 2587068
