Setup bandwidth voting data for different interconnect path configured
in device tree.
Change-Id: Icf69d2ca89c1978e7d6c2fd2c876d0365c577148
Signed-off-by: Manikandan Mohan <manikand@codeaurora.org>
This reverts commit 7d3ecfd796.
This change had caused a regression with swr-haptics driver probe
as the soundwire master couldn't enumerate swr haptics. Revert
this until we can understand why soundwire enumeration fails.
Change-Id: Ie5840247013a1a3fab15758e9ace7b131619be49
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
SMB5 charger drivers and their helper files use several power supply
properties on msm-4.19 which cannot be supported on msm-5.4 due to the
need for GKI compliance. Add support for main charger to register
as an IIO device with individual channels under it corresponding to
missing power supply properties from msm-4.19.
Change-Id: I7182160258fa2ebd4af36b0531b11d988cffdbd3
Signed-off-by: Jishnu Prakash <jprakash@codeaurora.org>
sdxlemur will have at most 1GB of DDR, so allow all of it to be
mapped as lowmem instead of enabling CONFIG_HIGHMEM.
Change-Id: I89148d18e0be0c1d99795b7f49184bb5421af0f1
Signed-off-by: Patrick Daly <pdaly@codeaurora.org>
When force FW assert, it should use RDDM timer instead of FW
boot timer since it expects FW entering RDDM mode.
Change-Id: Ic8498b0f3c23dc494267571da7f627eace9f91bd
Signed-off-by: Yue Ma <yuem@codeaurora.org>
When serial driver is present in second stage ramdisk, it takes ~5 sec to
init the UART. All the data bufferred till then will have to be put onto
the console taking a console lock and this causes a watchdog bark. To
avoid this watchdog issue, disable the console. This also disables early
console.
Change-Id: Ibded81922cb735e3035fc960258213c4de1d6a74
Signed-off-by: Prakruthi Deepak Heragu <pheragu@codeaurora.org>
MMRM interface is used to do admission control of
specific resources (eg: clock) of multimedia clients
(camera/display/video/cvp).
Change-Id: Ife92d31ab08c80c06467771e74d05ab1a9a8a54b
Signed-off-by: Shivendra Kakrania <shiven@codeaurora.org>
SVM going to rely on kernel autosleep feature to do suspend-to-RAM.
Enable required configurations to achieve suspend-to-RAM functionality.
Change-Id: Ie31abce7927c8b6b2ce5dad6f917f96c52e90803
Signed-off-by: Murali Nalajala <mnalajal@codeaurora.org>
Configure dbl and msgq interrupts as wakeup capable to wake up the SVM
from suspend-to-RAM state.
Change-Id: I1825109736ace36c5c871d52dfefe4a320fea335
Signed-off-by: Murali Nalajala <mnalajal@codeaurora.org>
This change enables CONFIG_NL80211_TESTMODE config for
wlan host driver in holi.
Change-Id: I0974f58a2f25c14991ff4a22b998827b0a579b95
Signed-off-by: Sandeep Singh <sandsing@codeaurora.org>
Add per a6xx target member to specify the preemption record size
in case it is different than the default size for all a6xx.
Change-Id: I6e5579eae47dc4ee6707437d858b8b969fe573ea
Signed-off-by: Harshdeep Dhatt <hdhatt@codeaurora.org>
The cooling device registration is using the parent node of the cpu
voltage cooling device. The devicetree configs are using the child node
to identify the cooling device. Switch to use the child device node, so
that the cooling device is bound with the thermal zone.
Change-Id: Id501421002c5dac7cb924455e09538a384ec9f85
Signed-off-by: Ram Chandrasekar <rkumbako@codeaurora.org>
Update SSR power up function to wait for FW recovery complete to
avoid race condition with linux PM sleep entry.
Change-Id: Ief0d64e7699956ba30f2ff84732e36f6b2fdc3b0
Signed-off-by: Manikandan Mohan <manikand@codeaurora.org>
Modified code in driver to align DT property
name with DTSI files.
Change-Id: I6423dcc68eb1dbf73c63240b128f41476caba99c
Signed-off-by: Tapas Dey <tdey@codeaurora.org>
Correct the device passed for registering a proxy consumer supply
in the regulator device probe.
Change-Id: I33028648b66b922cb1132fd87ca8aa2be1b02799
Signed-off-by: Jishnu Prakash <jprakash@codeaurora.org>
Don't start usb transfer when rwp offset is invalid to avoid exception
happening when transfer usb data.
Change-Id: I7182ebb2e66131a21d65f7df0ad239c6346c0e9d
Signed-off-by: Mao Jinlong <jinlmao@codeaurora.org>
The EUD driver's 'enable' command line argument is set to
EUD_ENABLE_CMD even if the bootloader hasn't enabled it,
which is not correct. Hence, update the 'enable' variable
based on the state of the hardware.
Change-Id: I1159436c0e9a803462f2154ccc05649d3f7b40da
Signed-off-by: Raghavendra Rao Ananta <rananta@codeaurora.org>
In case PCIe endpoint driver infers link down because of
completion timeout for config space access or if link fails
to enumerate, ep driver can request to handle the link down.
This allows to stream line the link down notification to ep
driver to initiate recovery operation.
Change-Id: I652e60e570c1e90c9f96d1c197e4b5501cd60a1e
Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
Pages that are swapped out are pages that can reside in the movable
zone. However, when they are swapped in, they are restricted to the
normal zone, when they can reside in the movable zone again. Set the
GFP flags accordingly for swapin allocations, so that they can be
satisfied from the movable zone.
Change-Id: I25919034a5197a1c4f830e498d32347aa460187f
Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org>
