Vatsal Bucha
42bb7e97d7
ARM: dts: msm: Add changes to support ATP on blair
...
Add changes to support ATP on blair.
Change-Id: I4e39ec243f4909262779f0568fe083454f2a059d
2021-08-11 15:50:28 +05:30
Priyansh Jain
de05840308
ARM: dts: msm: updating modem_tj mitigation for LAHAINA
...
Remove modem_tj mitigation from cx_pe rule for LAHAINA.
Change-Id: If889f43b5dbbf61278df717d1c6ec3a08a812cc1
2021-08-04 01:17:14 -07:00
qctecmdr
e24ec8907f
Merge "ARM: dts: msm: disable ipa-uc-holb-monitor"
2021-08-01 21:56:13 -07:00
Prakash Gupta
882bdcd214
ARM: dts: msm: updated memory map v1 for blair
...
Updated memory map for holi inline with v1.
Change-Id: I58dbd276f3e8e45463de10adb8c3835f31f939f4
2021-07-31 22:25:35 -07:00
qctecmdr
a0625ba3bc
Merge "ARM: dts: msm: Update USB2 core frequency for yupik"
2021-07-30 08:51:15 -07:00
Manaf Meethalavalappu Pallikunhi
8a7751e140
ARM: dts: qcom: Add modem mitigation for bcl violation in lahaina
...
Add modem level 3 mitigation for bcl level 0 violation
based on latest recommendation for lahaina.
Increase passive delay for bcl thermal zones to delay
clearing bcl mitigation.
Change-Id: I50e7935c53511e5c47826a4252cfebd0e346c1f8
2021-07-30 04:17:11 -07:00
Vijayavardhan Vennapusa
73def4b85e
ARM: dts: msm: Update USB2 core frequency for yupik
...
Update USB2 core frequencies to be voted while USB2 is active
for yupik.
Change-Id: Ic17bfd0cc9a776f0a2c60eee5192d92dd9796b5c
2021-07-30 01:46:31 -07:00
Rishabh Bhatnagar
933555c182
ARM: dts: msm: Change cpu frequency for V2 hardware
...
make changes to cpu frequency table for V2 hardware.
Change-Id: Ic8d75a2236d679e491fb3832d6246f1bfdc6d12a
2021-07-29 13:14:28 -07:00
qctecmdr
45be37018b
Merge "ARM: dts: msm: Add pm-qos-latency dt node for sdxlemur"
2021-07-28 13:53:56 -07:00
qctecmdr
c394fbf094
Merge "ARM: dts: msm: Enable link recovery for config space access fail"
2021-07-28 13:53:56 -07:00
qctecmdr
2e5371e316
Merge "ARM: dts: msm: Adding updated PHY tune parameters for blair"
2021-07-28 13:53:55 -07:00
l
8ec0007f4b
ARM: dts: msm: Add pm-qos-latency dt node for sdxlemur
...
Add pm-qos-latency which ensures that cpu is used to its full
capability,there by increasing ADB throughput.
Change-Id: I28284ca1425795987d89c39bf8ab6d7bfee5884d
2021-07-28 06:48:43 -07:00
Vivek Pernamitta
81013387d4
ARM: dts: msm: Enable link recovery for config space access fail
...
Enable link recovery by notifying client driver when config
space read/write fails.
Change-Id: I6286b3c2e9b677c1b0de2c6e89fe7c434d355443
2021-07-28 17:13:52 +05:30
qctecmdr
67baa38056
Merge "dt-bindings: pcie: Notify client for config space access issues"
2021-07-28 03:57:04 -07:00
Gopala Krishna Nuthaki
35c22d7176
ARM: dts: msm: Disable Skin config rules for BLAIR
...
Disable Skin config rules of quiet-ther,pa-therm0 and xo-therm
based on latest recommendations.
Change-Id: I8f78f4fcd3619c38260b73bfaada01853e0cb47f
2021-07-28 00:28:13 -07:00
Michael Adisumarta
93171f995a
ARM: dts: msm: disable ipa-uc-holb-monitor
...
Disabling ipa-uc-holb monitoring.
Change-Id: If3c7cdebcfe5cbb05b713394825a0a653e2a6c60
2021-07-27 12:23:07 -07:00
Vivek Pernamitta
7822326867
ARM: dts: msm: disable masking MSI interrupts at EP side
...
Disable masking MSI interrupts at EP side.
Change-Id: I4c7fb61890f65345a39ba81e34b90b9c0c5acc99
2021-07-26 20:29:10 -07:00
Rohith Kollalsi
fdb842bf06
ARM: dts: msm: Adding updated PHY tune parameters for blair
...
Adding updated phy tune parameters for blair.
This will ensure that qrd and mtp both have same phy
tuning values.
Change-Id: If286cc916c33a024ed53b04fd2aa153f7fbbc63c
2021-07-26 20:39:41 +05:30
Vivek Pernamitta
ee3ddee121
dt-bindings: pcie: Notify client for config space access issues
...
Notify the client driver to recover for EP config
space access issues.
Change-Id: I5567dbbdf58575954fb7caea05df2a3102825dc3
2021-07-25 05:00:03 -07:00
Pankaj Gupta
3b225e348f
ARM: dts: msm: Add support of 608Mhz GPU FMAX for yupik
...
Enable 608Mhz FMAX for yupik GPU as per speed bin requirement.
Change-Id: I480d419ece2fa6b10e51f05e262e4f67a51122a8
2021-07-22 15:33:05 +05:30
qctecmdr
7637fc63ce
Merge "ARM: dts: msm: Add device tree for M.2 USB mode on sdxlemur"
2021-07-21 09:07:14 -07:00
Michael Adisumarta
1ea1643683
ARM: dts: msm: enable LAN RX NAPI
...
Enable LAN RX NAPI.
Change-Id: Ic6a9939ba6d60118a47a2386e0651b3d5199eb98
2021-07-21 01:29:41 -07:00
qctecmdr
f75a4b9846
Merge "ARM: dts: msm: Update mode threshold current of L6C of yupik"
2021-07-20 00:03:27 -07:00
qctecmdr
ef51e77914
Merge "ARM: dts: msm: Update BCL thermal mitigation config for HOLI"
2021-07-19 03:51:11 -07:00
Jishnu Prakash
a3559a04a4
ARM: dts: msm: add ADC device instance for PMR735A on holi-pm6125
...
Add a SW-calibrated ADC instance for PMR735A on holi-pm6125
which can be used if there is a requirement to read any ADC
channels on PMR735A.
Change-Id: I8bff473ca2605a3601283865138dabf0589b903e
2021-07-16 16:17:59 +05:30
Jishnu Prakash
d02c277821
dt-bindings: iio: qcom,spmi-vadc: Add SW-calibrated ADC bindings
...
Add bindings for SW-calibrated ADC used on PMR735A/PMR735B on
targets which don't have PMK8350 running in master mode.
Change-Id: I753b3caf1e52ac9920a9df32cbef465277409700
2021-07-16 02:50:24 -07:00
Priyanka Gujjula
9b7f310fb3
ARM: dts: msm: Enable cxipeak support for blair
...
Enable cxipeak cooling device node for blair
and holi-pm6125 variant.
Change-Id: Ib75a06f0619af0f749a95f5d275d16faa73579de
2021-07-14 10:38:18 +05:30
qctecmdr
3c8db044c9
Merge "ARM: dts: msm: Modify ss phy initialization sequence on sdxnightjar"
2021-07-12 23:03:05 -07:00
Rohith Kollalsi
171ece287a
ARM: dts: msm: Modify ss phy initialization sequence on sdxnightjar
...
Modify ss phy initialization sequence on sdxnightjar according to
HPG.
Change-Id: I02d46ed95145bd168f2fa799fbf0a5205ed6528a
2021-07-12 20:52:44 -07:00
Mayank Rana
758b5b2b11
Revert "ARM: dts: msm: Set qcom,rmnet_in_use_tcm_mem with RMNET composition"
...
This reverts commit e6a51215e9 .
Change-Id: I0fb75abfd13064fe28af5962196a2171f0648cd1
2021-07-12 11:40:14 -07:00
Melody Olvera
c4277163de
ARM: dts: msm: Add device tree for M.2 USB mode on sdxlemur
...
Add device tree files for M.2 USB mode on sdxlemur.
Change-Id: Ia52cea241defd4d2459bad90807c59eea79e0ad7
2021-07-12 10:05:59 -07:00
Manaf Meethalavalappu Pallikunhi
86aa906b99
ARM: dts: qcom: enable cx ipeak lm separately for blair and holi-pm6125
...
Enable cx ipeak lm device driver separately for blair and
holi-pm6125 targets based on latest devicetree configurations.
Change-Id: I3326ac8760d5eef3d6e6ff118c4c8a1e3e52c659
2021-07-12 13:22:37 +05:30
qctecmdr
007ee56ff1
Merge "ARM: dts: msm: add ntn3 ipa pcie changes"
2021-07-11 07:42:49 -07:00
qctecmdr
d381f56d66
Merge "ARM: dts: msm: update clk tput threshold for IPA on Olympic"
2021-07-11 07:42:49 -07:00
Abhishek Chauhan
45cf36cb63
ARM: dts: msm: add ntn3 ipa pcie changes
...
Update IPA iossv2 pcie configuration changes.
Change-Id: I22536d8ab315dcb968a331d468aedb4e5aab81a9
2021-07-09 21:58:06 -07:00
qctecmdr
9b35a834c6
Merge "ARM: dts: msm: Mark PMIC QUPs as critical clock devices for BLAIR"
2021-07-09 06:01:39 -07:00
qctecmdr
f611c34276
Merge "ARM: dts: msm: Add wdog bite IRQ for pil modem"
2021-07-09 06:01:39 -07:00
Madhuri Medasani
f051948bd6
ARM: dts: msm: Mark PMIC QUPs as critical clock devices for BLAIR
...
To prevent deadlocks between the clock and regulator frameworks,
the QUP clocks used by I2C-connected PMICs must be enabled all
the time and not registered with the clock framework. Skipping
the registration short-circuits the I2C device's clock calls such
that they return success before grabbing the clock locks. Achieve
this behavior by setting GCC's qcom,critical-devices property.
Change-Id: Idf812aa1df3a21670b8e9c262548cbf5f528e41b
2021-07-09 00:03:24 -07:00
Lijuan Gao
74e0970bda
ARM: dts: msm: Add wdog bite IRQ for pil modem
...
Add wdog interrupt for pil modem.
Change-Id: I3cca2467edcadf66228d8604d014b564e1b36458
2021-07-08 23:55:31 -07:00
qctecmdr
596a06f138
Merge "ARM: dts: msm: Add disable L1 quirk in HS mode for blair"
2021-07-08 22:05:02 -07:00
Michael Adisumarta
14573bff00
ARM: dts: msm: update clk tput threshold for IPA on Olympic
...
Update IPA clock throughput thresholds to support
higher IPA port corner frequencies.
Change-Id: Ib44d42b42b8b279d894ca3eab9a3ac6592965c99
2021-07-08 21:32:19 -07:00
qctecmdr
6fe2a81629
Merge "ARM: dts: msm: Add APPS_APM_STATUS register for blair"
2021-07-08 18:06:02 -07:00
Jishnu Prakash
110c94ddb9
ARM: dts: msm: Update mode threshold current of L6C of yupik
...
Update mode threshold current of LDO6C of yupik to match
the threshold value expected by the client for HPM.
Change-Id: I60536af368d124eca816067471ed53bce7abf453
2021-07-08 15:09:44 +05:30
qctecmdr
6133dea78a
Merge "ARM: dts: msm: rename sound card for QRD blair"
2021-07-07 23:18:39 -07:00
qctecmdr
d7968bf744
Merge "ARM: dts: msm: set need unvote flag 0"
2021-07-07 23:18:39 -07:00
Ashish Chavan
f65991268d
ARM: dts: msm: Add support to sync charger/qg probe with vadc
...
Observing probe defer and other related error to happen when
Charger or QG tries to probe before vadc. Fix this by adding
a dependency in DT for these drivers with "*-supply".
Change-Id: Ic4a7917a7aa84503dc9dcb8bc789768552077106
2021-07-07 20:49:31 -07:00
Paul Zhang
ab9794285b
ARM: dts: msm: set need unvote flag 0
...
Don't unvote the cnss regulator.
Change-Id: Icbd4d8012a213c4e048ab1b06a900226a8e0e9fe
2021-07-07 19:35:07 -07:00
Gopala Krishna Nuthaki
a7fbbfd10b
ARM: dts: msm: Update BCL thermal mitigation config for HOLI
...
Update BCL thermal zone config with cdsp, gpu and modem
cooling devices for HOLI and its variants.
Change-Id: Iba8fa54af0948543527b4de0acc87cac0348be60
2021-07-07 15:19:19 +05:30
Kunlei Zhang
c1da1df3ee
ARM: dts: msm: rename sound card for QRD blair
...
Rename sound card to pick proper acdb files for
QRD blair.
Change-Id: I0840d0665a23e3098d3f81b32fedf33799488303
2021-07-07 15:48:21 +08:00
Madhur Rawat
b53b6145d0
ARM: dts: msm: Add APPS_APM_STATUS register for blair
...
Add APSS_APM_STATUS dcc debug register list for blair
Change-Id: I31d38cfd77d440691308db73a1df56b81c93c20c
2021-07-06 06:16:31 -07:00