Add a NULL check before calling rps_enable callback
from ipa_set_rps_per_vdev and also add a check to avoid
disabling rps twice.
Change-Id: Ib63b2cda99aa332905df640ffa2d401c22845ad2
CRs-Fixed: 2876490
Call qdf_check_state_before_panic with caller function name and
line number details.
Change-Id: I9fb4b382576e52bc1ad7e316bd09e3124e8fce98
CRs-Fixed: 2857671
Currently driver fills unicast, multicast & auth mode values from
csr session which is not updated after roaming to AP with different
security profile. This causes incorrect values in AP profile
command and subsequent roaming fails.
Send correct authmode/unicast and multicast ciphers in AP profile
command to firmware. Fill the values from the crypto component.
Also modify the below 2 ini default values as:
candidate_min_rssi_for_beacon_miss=-75
candidate_min_rssi_for_disconnect=-75
Change-Id: I33cc9f516447071e977768f01738eea7a2ecd99c
CRs-Fixed: 2879943
As a result of long path names and a large number of source files,
combined with upstream kernel build infrastructure changes, the
qcacld-3.0 build may encounter E2BIG errors when linking the final
wlan.o. To address this problem support for nested composite objects
is being added to the kernel. Update the Kbuild with the logic
required to take advantage of the nested composite support.
Change-Id: Ic6748517a922fc03a43acab2b44133b37e02707a
CRs-Fixed: 2861273
Currently UMAC_INTERFACE_MGR_OBJS are added to OBJS when
CONFIG_INTERFACE_MGR is enabled. An upcoming change requires that
assignments to OBJS be unconditional, so relocate the condition to
wrap the assignment of UMAC_INTERFACE_MGR_OBJS.
Change-Id: Ibfac21851b6a27a532cbe28a9be86909ea093e5d
CRs-Fixed: 2874549
Currently the qdf_lro.o rule is not located with the other QDF_OBJS
rules, so relocate it so that all of the QDF rules are contiguous.
Change-Id: Ia4d6e133901af900d5f63208e14ac24501ac005e
CRs-Fixed: 2868050
Currently the definitions of the Direct Buffer RX component are
defined in the middle of the WMA component definitions. Relocate these
definitions so that the WMA definitions are contiguous.
Change-Id: I3f83b70a18131a84cb262840103e705862498bc4
CRs-Fixed: 2868049
Currently HTT_OBJS are added to OBJS when CONFIG_LITHIUM is not
enabled. An upcoming change requires that assignments to OBJS be
unconditional, so relocate the condition to wrap the assignment of
HTT_OBJS.
Change-Id: Ifdce8f5ab6b4597156341620ae101ee8be2b4afd
CRs-Fixed: 2868008
Currently HAL_OBJS are added to OBJS when CONFIG_LITHIUM is enabled.
An upcoming change requires that assignments to OBJS be
unconditional. Fortunately the assignment of .o files to HAL_OBJS is
already conditional upon CONFIG_LITHIUM so remove the condition from
the assignment to OBJS.
Change-Id: I0dd7ca874561ff6c6cd8ccfdae1775f6dcb9bf12
CRs-Fixed: 2868007
Currently FWLOG_OBJS are added to OBJS when
CONFIG_FEATURE_FW_LOG_PARSING is enabled. An upcoming change requires
that assignments to OBJS be unconditional, so relocate the condition
to wrap the assignment of FWLOG_OBJS.
Change-Id: I6b09d9dfa2553943d3bb4370dc1977106a14a7d5
CRs-Fixed: 2868006
Currently EPPING_OBJS are added to OBJS when CONFIG_FEATURE_EPPING is
enabled. An upcoming change requires that assignments to OBJS be
unconditional, so relocate the condition to wrap the assignment of
EPPING_OBJS.
Change-Id: I69f9b1b707c9475a393f89f2297e90e4ee8d1e5e
CRs-Fixed: 2868005
Currently DFS_OBJS are added to OBJS when
CONFIG_WLAN_DFS_MASTER_ENABLE is enabled. An upcoming change requires
that assignments to OBJS be unconditional, so relocate the condition
to wrap the assignment of DFS_OBJS.
Change-Id: I0c04087feb76c7fbbaa4231f1c36a83624e54482
CRs-Fixed: 2868004
Currently FWOL_OBJS are added to OBJS when CONFIG_WLAN_FW_OFFLOAD is
enabled. An upcoming change requires that assignments to OBJS be
unconditional, so relocate the condition to wrap the assignment of
FWOL_OBJS.
Change-Id: I103628406108b0ca1d8290f61e379c796a63bce5
CRs-Fixed: 2868003
Currently OCB_OBJS are added to OBJS when CONFIG_WLAN_FEATURE_DSRC is
enabled. An upcoming change requires that assignments to OBJS be
unconditional. Fortunately the assignment of .o files to OCB_OBJS is
already conditional upon CONFIG_WLAN_FEATURE_DSRC so remove the
condition from the assignment to OBJS.
Change-Id: I011aa37270b8024d2f558bdb18aac2a02e3c1026
CRs-Fixed: 2868002
Currently IPA_OBJS are added to OBJS when CONFIG_IPA_OFFLOAD is
enabled. An upcoming change requires that assignments to OBJS be
unconditional. Fortunately the assignment of .o files to IPA_OBJS is
already conditional upon CONFIG_IPA_OFFLOAD so remove the condition
from the assignment to OBJS.
Change-Id: I16217146d44b790298e47516c28e1ce6445ffed6
CRs-Fixed: 2868001
Currently PKTLOG_OBJS are added to OBJS when CONFIG_REMOVE_PKT_LOG is
not enabled. An upcoming change requires that assignments to OBJS be
unconditional, so relocate the condition to wrap the assignment of
PKTLOG_OBJS.
Change-Id: I34b9bea3186e5bda12e7ce0d8a1327383170b6c1
CRs-Fixed: 2868000
Currently HOST_DIAG_LOG_OBJS are added to OBJS when BUILD_DIAG_VERSION
is enabled. An upcoming change requires that assignments to OBJS be
unconditional, so relocate the condition to wrap the assignment of
HOST_DIAG_LOG_OBJS.
Change-Id: Icdf6898b848f682d9617537394651f533ba81553
CRs-Fixed: 2867999
Currently DISA_OBJS are added to OBJS when CONFIG_WLAN_FEATURE_DISA is
enabled. An upcoming change requires that assignments to OBJS be
unconditional. Fortunately the assignment of .o files to DISA_OBJS is
already conditional upon CONFIG_WLAN_FEATURE_DISA so remove the
condition from the assignment to OBJS.
Change-Id: I2130b8efe12e5366b40856704d62d000a4e474f4
CRs-Fixed: 2867998
Currently ACTION_OUI_OBJS are added to OBJS when
CONFIG_WLAN_FEATURE_ACTION_OUI is enabled. An upcoming change requires
that assignments to OBJS be unconditional. Fortunately the assignment
of .o files to ACTION_OUI_OBJS is already conditional upon
CONFIG_WLAN_FEATURE_ACTION_OUI so remove the condition from the
assignment to OBJS.
Change-Id: Icf1c4f061286e3ae88344b380deff4bf135143e1
CRs-Fixed: 2867997
Currently PKT_CAPTURE_OBJS are added to OBJS when
CONFIG_WLAN_FEATURE_PKT_CAPTURE is enabled. An upcoming change
requires that assignments to OBJS be unconditional. Fortunately the
assignment of .o files to PKT_CAPTURE_OBJS is already conditional upon
CONFIG_WLAN_FEATURE_PKT_CAPTURE so remove the condition from the
assignment to OBJS.
Change-Id: If9083c5ba382e1ae1a638b77e12437a707b69073
CRs-Fixed: 2867996
Currently FTM_TIME_SYNC_OBJS are added to OBJS when
CONFIG_FEATURE_WLAN_TIME_SYNC_FTM is enabled. An upcoming change
requires that assignments to OBJS be unconditional. Fortunately the
assignment of .o files to FTM_TIME_SYNC_OBJS is already conditional
upon CONFIG_FEATURE_WLAN_TIME_SYNC_FTM so remove the condition from
the assignment to OBJS.
Change-Id: I57fd2c08f6c732018d50a232156e3b29c0fac285
CRs-Fixed: 2867921
Currently UMAC_GREEN_AP_OBJS are added to OBJS when
CONFIG_QCACLD_FEATURE_GREEN_AP is enabled. An upcoming change requires
that assignments to OBJS be unconditional, so relocate the condition
to wrap the assignment of UMAC_GREEN_AP_OBJS.
Change-Id: If3e3a97d39c7f347c2ff91bcd3db86675dcaa664
CRs-Fixed: 2867913
Currently UMAC_CRYPTO_OBJS are added to OBJS when
CONFIG_CRYPTO_COMPONENT is enabled. An upcoming change requires that
assignments to OBJS be unconditional, so relocate the condition to
wrap the assignment of UMAC_CRYPTO_OBJS.
Change-Id: I28ca48d6876307814ce440a3fe53cb8f8df1d42f
CRs-Fixed: 2867906
Currently DP_OBJS are added to OBJS when CONFIG_LITHIUM is enabled.
An upcoming change requires that assignments to OBJS be unconditional.
Fortunately most of the assignments to DP_OBJS are already protected
by this feature. Update the logic so that all of the assignments are
protected, and remove the condition from the OBJS assignment.
Change-Id: Icc7d015831d8940bf1d91335be1439a70965801f
CRs-Fixed: 2867900
Currently hal_rx_flow.o is assigned to DP_OBJS, but since this is a
HAL file, change the assignment to HAL_OBJS.
Change-Id: Ie7c56300d3dd60b52305b5b3c7ace58c6e8cdb57
CRs-Fixed: 2867882
Currently TXRX3.0_OBJS are added to the OBJS aggregation only when
CONFIG_WLAN_FEATURE_DP_RX_THREADS is enabled. However only one of the
object files, dp_rx_thread.o, should be controlled by that feature.
Update the logic to conditionally add dp_rx_thread.o to TXRX3.0_OBJS,
to encapsulate all TXRX3.0_OBJS assignments within CONFIG_LITHIUM,
and unconditionally add TXRX3.0_OBJS to OBJS.
Change-Id: I6ceeafeab43a960277a1870daff5566288199ada
CRs-Fixed: 2867843
There are currently two different places where ol_txrx_event.o is
added to the final target object list. As part of ongoing Makefile
cleanup consolidate these to a single location.
Change-Id: Id342ae771830f5fd4d65c6c5523c36f1e50bc941
CRs-Fixed: 2867841
Beamforming is now supported by FW so extra capability checks can be
skipped if the service bit is set. Otherwise set the capabilities to
none.
This reverts commit If629eedeab5d35b1799c6eb5ee7d71726ada262a.
Change-Id: I4a62d43e8e3ecc985e663aa0c6eaec252d3241e9
CRs-fixed: 2874817
Store the NAN NDI beamform service bit in the NAN capability struct and
add API to access that value.
Change-Id: I429fc870b5287bd40855b9277d14b19574974a46
CRs-fixed: 2876730
GETSTATSSTAINFO and GETSTAINFO cmds return the correct
mcbc counters in SAP+STA case with IPA disabled since the
host updates these stats during dp_rx processing.
With IPA is enabled the hdd callback invoked from the IPA
driver needs to update the counters if broadcast or
multicast pkts are received in exception path.
Change-Id: I450bf809fab559be8f2fbd172c49fd7e8858ee5c
CRs-Fixed: 2875804
As part of start_bss response, beacon structures are extracted
from pe_session and stored in bss_description. But non-beaconing
entities like NDI doesn't have a beacon and corresponding
structures in pe_session are not valid. Beacon structures
schBeaconOffsetBegin and schBeaconOffsetEnd contain 0 in such
cases. Calculation of beacon IE length from these would result an
invalid length and leads to invalid IE extraction from
bss_description later(from csr_roam_process_start_bss_success).
Check if pe_session has valid beacon entry to avoid this.
Change-Id: Ic78dfcdbfb83cb29437d46337d13d62df533d780
CRs-Fixed: 2876897
Host doesn't update vdev NSS value for NDI from mac config to
pe_sessions's vdev_nss member. Due to which host updates incorrect
preferred Tx and Rx NSS to FW in vdev start cmd for NDI interface.
Hence update proper NSS config from mac to pe_sessions's vdev_nss
member.
Change-Id: I5b7a4bdda3780e9a18e9954b64f03fa47a7dbe5f
CRs-Fixed: 2878203
Currently the preferred channel list is not updated to have indoor only
channels removed. Add functionality to remove the indoor channels from
the PCL.
Change-Id: I31df737a3688f6c64c2eb5fa5ab0cea1d36869e5
CRs-fixed: 2874092
Currently driver is using sap notify api of regulatory to
update channel list for disable channels list command
which is not the correct way as sap notify api is designed
to be used by sap releted operations.
To address above issue write a separate api for
disable channel list command.
Change-Id: If65c1f4226ced375b9abf3dcdbf21a70d4014e72
CRs-Fixed: 2872007
Currently driver is asserting when INI file parsing is failed.
But it is expected to fail when system state is under reboot or
power off. This is because kernel disables file reading during this
reboot or power off.
To address this, Remove the assert based on the status of cfg_parse
API.
Change-Id: Ief92e1af5cc22d4bfad481953f203719a9c17343
CRs-Fixed: 2877051
Enable FEATURE_HAL_DELAYED_REG_WRITE_V2 support for Tx rings
register writes and QCA_OL_DP_SRNG_LOCK_LESS_ACCESS support
for Rx rings register writes, for moselle platforms.
Change-Id: I6b2469d22a37a097fa721269d311c0076c3b89a0
CRs-Fixed: 2873528
This state ensures that host will not issue connect from scan for
ssid completion. Thus if this fresh connect also issue scan for
ssid, then host drops connect command assuming disconnect is in
progress. If host gets disconnect request in between the scan for
SSID of previous connect request, host aborts scan and host blocks
next commands till the sme disconnect timeout.
Change-Id: Ia42332dfef73e4b6ea8f348894427e5fe81eac1d
CRs-Fixed: 2865047
Currently when SAE single pmk lifetime expires, the userspace
issues disconnect. To avoid this, on reaching a threshold value
of the total pmk lifetime, the firmware will clear the single
PMK and initiate a roam scan to perform full SAE and derive
new pmk.
Add changes to:
1. Send the remaining single pmk timeout value in seconds to
firmware.
this is calculated as the diffence in pmk timeout configured by
userspace and the time passed after set_pmksa was done (which is
system timestamp between the set_pmksa timestamp and timestamp at
which RSO command is filled).
2. Add internal roam trigger for SPMK timeout trigger.
3. Set the roam score delta value as 0 for SPMK timeout roam
trigger.
Change-Id: I62c2ddbbfeb2811a4342d41f2bdaa8d988568bcc
CRs-Fixed: 2869665
