In very noisy environment and with 6 GHz co-located AP, scan
database size of 300 might not be enough.
So increase the size to 500.
Change-Id: I26077b2ab0d24f73a7c8e29990504d5b284eccf4
CRs-Fixed: 3395834
When Scan db reaches max size, driver deletes the oldest node,
so chances are that BSS on 1st freq scanned is removed.
This lead to scan for SSID, which will do a scan again on
all freqs, and thus we end up in flushing the entry again.
TO fix this use freq hint to scan for ssid to quickly find the
AP so that required AP remains in scan database as it will
be the latest entry.
Change-Id: I28849ee97ff1f492d372870c362288206c4ec9a5
CRs-Fixed: 3391899
In the case of STA/CLI + STA/CLI, if an STA/CLI is in connecting state
and a disconnect is received on any other STA/CLI, the disconnect can
timeout waiting for the connection on the first STA/CLI to get completed.
This is because the connection is a blocking serialization command and
it can try multiple candidates and thus can take up to 30+ sec to
complete.
Same way if an SAP/GO has a start/stop command or peer disconnect in
pending queue, the delay is processing it can cause timeouts and other
issues.
So abort the next connection attempt if any of the vdev is waiting
for vdev operation to avoid timeouts.
Change-Id: I09077555b4f3a33f5ef5846ffd6e2bc5ea998858
CRs-Fixed: 3386150
Currently 160 MHz chan width set for 6 GHz band channel is not
allowing.
This change is to set 160 MHz chan width if 6 GHz band channel support.
Example cmd: hostapd_cli DRIVER CHANNEL_SWITCH <Channel> <BW>
Change-Id: I5955ba524d3e77fb49d7acf4098fd0c564e138b0
CRs-Fixed: 3356605
Use cdp_wdi_event_unsub() to unsubscribe
PKT_CAPTURE_RX_NO_PEER_SUBSCRIBER in
pkt_capture_wdi_event_unsubscribe().
Change-Id: I43575df1402611d468b8523bf948d2dc86f31dd7
CRs-Fixed: 3260272
Currently there is no attribute to set the wifi calling state
from user space to fw.
With this change add an attribute to set wifi config vendor
command to configure wifi calling state to fw via platform
driver.
Change-Id: I982e9a7245b9e5108cd6cbcb4162daa4b4b6a412
CRs-Fixed: 3345705
Currently in wma_extscan_hotlist_match_event_handler
API, dest_hotlist get memory allocation based on numap
which takes value from event->total_entries.
But numap is limited to WMA_EXTSCAN_MAX_HOTLIST_ENTRIES
and event->total_entries more than WMA_EXTSCAN_MAX_HOTLIST_ENTRIES
can cause out of bound issue.
Fix is to populate dest_hotlist->numOfAps from numap
instead of event->total_entries to avoid any out of bound issue.
Change-Id: I756f7e4a4dcd454508bba83d4a8bbbb139530905
CRs-Fixed: 3346781
Currently, there is no print to check local constrtaint which
may be reason of tx_power updation based on power constarint is
absolute or not. Add print to check local constarint, so that
tx power updation can be monitored.
Change-Id: I463828aab69e189c6cd6c4e61e01af1ba140ab29
CRs-Fixed: 3260542
In wma_group_num_bss_to_scan_id(), bssid_list may be accessed out
of boundary.
Add check to avoid potential OOB access for bssid_list.
Change-Id: I218af0fe617f64a50c7c296c622f7fac01e1b4fc
CRs-Fixed: 3357461
Prepare FILS discovery template with mandatory fields
including fd cpabilities and center frequency and also
TPE IE and send the template to firmware.
It is called when beacon template is updated.
Change-Id: I927f6a1c0bcd8fa531d48b1fa84cc256b4c1665f
CRs-Fixed: 3081251
In SAP+GO concurrency, if move SAP to DFS channel (BW 160 MHz)
and cause MCC with GO, the target will do CAC on SAP, but target
doesn't support MCC with GO when SAP is CAC state.
Fix by checking correct BW of CSA target channel so that correct
DFS flag can be got and if target channel is DFS causing MCC
with other AP interface then reject CSA request.
Change-Id: Ic7821cf62d3b364e4d2ea052dc82d65d18054091
CRs-Fixed: 3275285
Currently In os_if_monitor_mode_configure API,
tb attribute is getting accessed before parsing
the data coming from userspace.
This is leading to illegal memory access.
Move tb attribute access after parsing userspace
data with API wlan_cfg80211_nla_parse.
Change-Id: Ia972ebb87e18ed82c6c3a2ff3ce2d10a4b9685b9
CRs-Fixed: 3241952
Max tx power limit is received as part of the
WMI_VDEV_START_RESP_EVENTID. Add debugs to print the
max_allowed_tx_power in host.
Change-Id: I4ca0d4a4a2a1e452b8a6a9f1c48ad52fcd2f6213
CRs-Fixed: 3167045
Currently if driver load/unload is in progress or driver is
loaded and mode change to FTM mode is issued from the sys
path, memory leakage occurs during driver unload.
To address this issue, don't change mode if driver is already
loaded or load/unload is in progress.
Change-Id: I09cacaf11d516c62de1a9699547eb01476afdc1f
CRs-Fixed: 3349217
In the current driver implementation, the default ini value of
gSoftApMaxPeers is set to 32, but for mobile devices, FW can
only support 10 SAP peers at max. Hence, change the default
value of gSoftApMaxPeers to 10.
Change-Id: I8c5a2a8422f02bb464a11d823f8528ebb88bb34c
CRs-Fixed: 3227078
This is applicable only when the roaming happens from 2.4 GHz/5 GHz
to 6 GHz AP.
The value is used to check if the 6 GHz AP to which we are roaming
(from 2.4 GHz/ 5 GHz) is better than current AP in terms of RSSI.
This checking is disabled if the value is set to zero.
Change-Id: I77f1183e1fd704dfa153841e669a20c9e75d0fe7
CRs-Fixed: 3353346
During the roam scan, if there are no desired APs found in the partial
frequency list, an immediate full scan on all the supported frequencies
is initiated as a fallback. This would include the 6 GHz PSC
frequencies by default.
This attribute allow that behavior to be modified to include PSCs only
if 6 GHz use has been detected in the environment.
Change-Id: I6dc380419f14b920737fd87cd9a487c28364563b
CRs-Fixed: 3351697
User can include/exclude the frequencies in roam full scan that
were already scanned by the previous partial scan, using the new
vendor attribute introduced as part of roam vendor command.
Host sends the configured value to firmware.
As per current implementation of roam scan, if there are no APs
found during partial scan, immediately a full scan will be
initiated as a fallback. This includes all channels that were
already scanned as part of partial scan.
This attribute controls the optimization, to exclude all channels
which are already scanned as part of partial scan.
Change-Id: Icd6381b4daadcfe32dabda131ae92e2e32f07f1d
CRs-Fixed: 3343657
User can configure roam hand-off delay value using the new vendor
attribute introduced as part roam vendor command.
This change gets the configured value and sends it to firmware.
And firmware delays the roam Hand-off (in msec) by the specified
duration to receive pending RX frames from the current BSS.
Change-Id: Ic328c077cba06532ee8ffed12cde072c816b92e0
CRs-Fixed: 3329964
Checking for roaming in progress wait on SME lock from work queue,
while the other thread who has taken SME lock wait for this
work queue to complete the execution.
To fix avoid taking SME lock while checking for roaming in progress.
Change-Id: I428bc957c276f36751cdb9a4b3337a8cc2d45f7f
CRs-Fixed: 3344013
Host checks RMF enable and robust action frame category, if both are
true then sets protected bit in mac header of management action frame.
Change-Id: I2d57c52b66ff7abd44dd02b73ad18f13fbdef009
CRs-Fixed: 3262340
DUT roams to 2 GHz channel 6 bw 20 MHz, OBSS parameters are not
initialized by lim_fill_ft_session. Later when DUT gets CSA event
to 2 GHz channel 1 bw 40 MHz, the OBSS scan command will send
invalid obss_width_trigger_interval with zero value to target.
Fix by initialize the OBSS parameters without check current AP's
BW.
Change-Id: I6f895371898fde292cde5a108a3b4fcd95836186
CRs-Fixed: 3287522
Currently, the bitmap of action frames that can wake up the
host during suspend is sent via the wmi command
WMI_WOW_SET_ACTION_WAKE_UP_CMDID. This bitmap doesn't include
DSCP action frames so currently the host doesn't wake up for
DSCP action frames when in suspend mode.
Enable wake up for DSCP action frame for runtime PM as well
as for wow mode.
Change-Id: I51ba3e8ef52755af25ed922161028dfbaccaa250
CRs-Fixed: 3262353
On reception of vendor specific action frames, host performs basic sanity
on vendor specific action frames fields and then forwards to supplicant.
Change-Id: Ib22b9a431411fff8128e461972b81b66688a0919
CRs-Fixed: 3262331
mscs_pkt_threshold - This ini specifies the Voice pkt count
threshold to Send the MSCS action frame to AP. To disable MSCS
feature in driver set mscs_pkt_threshold = 0 in ini file.
Change-Id: Ie1d8d3f3289d8f41a16f187bf9256b959019d998
CRs-Fixed: 3262346
