-revert https://gerrit.mot.com/#/c/1718145/
-the power supply of Sar sensor need to be always on
Change-Id: I3106922212b0286146b7119f23b4b4c95b7ec62a
Signed-off-by: chenlj2 <chenlj2@motorola.com>
Reviewed-on: https://gerrit.mot.com/1720921
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Guoyue Liu <liugy11@motorola.com>
Reviewed-by: Tao Sun <suntao2@motorola.com>
Submit-Approved: Jira Key
Coparing with the last generation product, It add I2S interface
to support realtime stream vibration. It includes a sound component
driver for audio system.
Change-Id: I567dafd1ceedeecacd5e23a935c18a9bcf01920e
Signed-off-by: huangys <huangys@motorola.com>
Reviewed-on: https://gerrit.mot.com/1719560
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
There are some changes in linux kernel 5.4:
- struct regulator_config lack of ena_gpio member, now should use ena_gpiod.
- struct regulator_dev's member mutex, its type changed from struct mutex to
struct ww_mutex, so should use regulator_lock() rather than mutex_lock().
- rdev_get_id does not allow to use, remove it.
Change-Id: I10fdf7de2e5e9fe4d64177b120bea4be0bd109de
Signed-off-by: liuwang2 <liuwang2@lenovo.com>
Reviewed-on: https://gerrit.mot.com/1679026
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Long Cheng <chengl1@motorola.com>
Reviewed-by: Zhenxin Xi <xizx@motorola.com>
Submit-Approved: Jira Key
It's used to save power.
It's only used on Borneo NA
Change-Id: I2aa60149f0a362dc29fc0eded5c509a9fd4ddc7c
Signed-off-by: chenlj2 <chenlj2@motorola.com>
Reviewed-on: https://gerrit.mot.com/1718145
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Jiacheng Ou <oujc1@motorola.com>
Reviewed-by: Guoyue Liu <liugy11@motorola.com>
Reviewed-by: Wang Wang <wangwang1@lenovo.com>
Submit-Approved: Jira Key
Vibration request (RTP excluded) comes in forms of duration or waveform
ID. Adding code to invalidate duration after playing haptic to
distinguish the case when duration has not been explicitly set. This
allows to play preset wave form (e.g. weark short haptic) in case when
vibration request is missing waveform ID or duration info.
Change-Id: I5bc548ff5a50c81ab3302976a9eb1f11028fa41b
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/1707674
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Igor Kovalenko <igork@motorola.com>
Submit-Approved: Jira Key
When updating register value by mask, avoid write transfer when old
and ne values are identical.
Change-Id: Ie9a1a51684b106ee05b893805d2a3a468aa1b812
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/1701667
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Ryan Lattrel <ryanl@motorola.com>
Reviewed-by: Igor Kovalenko <igork@motorola.com>
Submit-Approved: Jira Key
External function insertion can be delayed due to ongoing firmware
update. However, detection work will still run remove handler if
function needs to be re-inserted. Check handle for NULL in remove
handler to avoid kernel panic.
Change-Id: I87282155d375548b140b8086cee59dde9a552884
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/1714293
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Igor Kovalenko <igork@motorola.com>
Submit-Approved: Jira Key
Because the proc entry tree of utags cannnot be removed when
the module is unloaded, and there is no whitelist ABI to unload
all utags tree, so make this module unloadable when probe success.
Change-Id: I4c49c733419521aa7f871a971701c06e7c5c048e
Reviewed-on: https://gerrit.mot.com/1708415
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
This reverts commit 8ccd0ad9716abe8c567fd05700e3936ab1f8f5fc.
Revert Type : Compile
Reverted by : ECSCM (a16821)
Root Cause : To resolve compilation issue by this fix.
Change-Id: Ia7c30d3e164735744d8e8e834db919ecf4936c29
Reviewed-on: https://gerrit.mot.com/1711831
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Reviewed-by: Raja Phani K <a16821@motorola.com>
Submit-Approved: Raja Phani K <a16821@motorola.com>
Tested-by: Raja Phani K <a16821@motorola.com>
dm_ver = 4 profiles with changed properties:
- Dsg Current Threshold 40mA -> 80mA
- Chg Current Threshold 60mA -> 125mA
- Quit Current 25mA -> 50mA
- Taper Rate 25mA -> 100mA
Add chemid 2766 and 2767 into each profile and committed the raw chemid
files for archival
Add cc_gain to the Golden Profiles and removed the temporary function
Add external thermistor as temperature source to Golden Profile
NO_PROP_NEEDED specific to smith fuel gauges
Change-Id: I4b4a8f1b0ef1b25ea6662caf2fe1c654955a5cbf
Signed-off-by: Drew Abbott <drewa@motorola.com>
Reviewed-on: https://gerrit.mot.com/1710233
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Ling Jin <lingjin@motorola.com>
Submit-Approved: Jira Key
Charger is over current at start of charge and between Temp and State
changes. Detect early overcurrent and scale down target threshold to
maintain currents within battery spec limits.
NO_PROP_NEEDED: Applies to smith and Olson dual battery archs.
Change-Id: Id2071f4a9f55066a0e6bdb42f51a051023731540
Signed-off-by: Bernie Moreno-BERNIEM <berniem@motorola.com>
Reviewed-on: https://gerrit.mot.com/1711305
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Ling Jin <lingjin@motorola.com>
Submit-Approved: Jira Key
In order to keep compatability with current Moto products, GKI products
should use qcom dlkm files for GKI compile.
Including original qcom dlkm file will also easily sync with Qcom's changes.
Change-Id: I2373003e8149a2cfb9a2fbb4bf4784297d30d7e1
Reviewed-on: https://gerrit.mot.com/1709604
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Tested-by: Jira Key
Submit-Approved: Jira Key
Mechanicals shortcomings require touch events from the bottom of the
screen to be suppressed to avoid unwanted side effects. Adding clip
area option controlled via device tree to support this.
Change-Id: I744197e8db6f595ea77e482f53f29e48e0497e2d
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/1707675
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Igor Kovalenko <igork@motorola.com>
Submit-Approved: Jira Key
Reviewed-by: Ryan Lattrel <ryanl@motorola.com>
This reverts commit f7086a2737502e42fa690fb7bf6b1685816cdeb7.
The previous commit will cause doha, rav, buron-r jenkins job failure, because
some drivers have many warning as error. so revert the new patch
Change-Id: Iec55a038cdf8a844f023128fc84294d05e64e861
Reviewed-on: https://gerrit.mot.com/1709428
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Raja Phani K <a16821@motorola.com>
Submit-Approved: Raja Phani K <a16821@motorola.com>
fix the compile error during GKI kernel 5.4:
FAILED: ninja: 'out/target/product/jordan/dlkm/lib/modules/gki/utags.ko', needed by 'out/target/product/jordan/vendor/lib/modules/5.4-gki/utags.ko', missing and no known rule to make it
When build user variant, Qcom will build all kernel and modules with both
GKI and QGKI kernel configs, so Moto kernel modules should use the qcom's
latest dlkm's AndroidKernelModule.mk
Change-Id: Id7ca3976e1084474c801822cac07057c4466ba9c
Reviewed-on: https://gerrit.mot.com/1706097
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Zhenxin Xi <xizx@motorola.com>
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
TP:
There is a compilation error on kernel 5.4:
ERROR: sensors_classdev_unregister undefined!
ERROR: sensors_classdev_register undefined!
So specific the depended module sensors symbol file.
NO_PROP_NEEDED: <only for v(CR) project>
Change-Id: I4d0acbc01e8c91c6d0226e26e1cd408d55b8df9c
Reviewed-on: https://gerrit.mot.com/1708522
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
when exfat unmounted, but fs_error maybe callbacked by block layer
still.so just check whether the sb and sb_fs_info was released.
Change-Id: I30f55a2f3a20cbaecccbcf12d143590a02d1bf19
Signed-off-by: yuedl1 <yuedl1@lenovo.com>
Reviewed-on: https://gerrit.mot.com/1708296
Tested-by: Jira Key
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Reviewed-by: Zhenxin Xi <xizx@motorola.com>
Submit-Approved: Jira Key
Check for charge fcc higher than total combined batt fcc specs
and scale down to prevent initial over current condition when
charger first start and when temp or state changes occur.
NO_PROP_NEEDED: Applies to smith and also olson
Change-Id: I68de21a244256787a29467a765431ffad9b4fadf
Signed-off-by: Bernie Moreno-BERNIEM <berniem@motorola.com>
Reviewed-on: https://gerrit.mot.com/1708110
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Ling Jin <lingjin@motorola.com>
Submit-Approved: Jira Key
fix the compile error during GKI kernel 5.4:
/home/xizx/work/moto/8350/8350_mainline_0724-new/kernel/msm-5.4/../../motorola/kernel/modules/drivers/mmi_info/mmi_ram_info.c:17:10: fatal error: 'linux/mmi_annotate.h' file not found
/home/xizx/work/moto/8350/8350_mainline_0724-new/kernel/msm-5.4/../../motorola/kernel/modules/drivers/mmi_info/mmi_storage_info.c:19:10: fatal error: 'linux/mmi_annotate.h' file not found
/home/xizx/work/moto/8350/8350_mainline_0724-new/kernel/msm-5.4/../../motorola/kernel/modules/drivers/mmi_info/mmi_boot_info.c:31:10: fatal error: 'soc/qcom/mmi_boot_info.h' file not found
Change-Id: I1a8c6b103e6cb1c77df6a428154d47dfc74a734a
Reviewed-on: https://gerrit.mot.com/1707443
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Zhenxin Xi <xizx@motorola.com>
Submit-Approved: Jira Key
The dma_remap() is not supported again in GKI kernel 5.4, so use vmap
to remap the reserved memory.
build error:
make[1]: Entering directory `/home/xizx/work/moto/8350/8350_mainline_0626_kernel/out/target/product/jordan/obj/kernel/msm-5.4'
CC [M] ../../motorola/kernel/modules/drivers/mmi_annotate/mmi_annotate.o
/home/xizx/work/moto/8350/8350_mainline_0626_kernel/kernel/msm-5.4/../../motorola/kernel/modules/drivers/mmi_annotate/mmi_annotate.c:143:17: error: implicit declaration of function 'dma_remap'
Change-Id: I47a32fdcd98d92428223ec481a90c51875baaac6
Reviewed-on: https://gerrit.mot.com/1651707
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Zhenxin Xi <xizx@motorola.com>
Submit-Approved: Jira Key
motorola/kernel/modules/drivers/input/misc/ets_fps_mmi/:
Call display panel early power-on when finger is detected.
To avoid unexpected calling on panel's early power-on, e.g. unexpected
touching on FPS, move this calling from case of interrupt received to
case of finger detected.
NO_PROP_NEEDED: This feature is only enabled on bo for now. If this
feature wants to be enabled on bq-shm2018, the cherry-pick should then
be done in the development stage of related products.
Change-Id: I8a24835a3b2c8acfdb3a4ed744501b9a7b67b8c4
Signed-off-by: chengql2 <chengql2@lenovo.com>
Reviewed-on: https://gerrit.mot.com/1706588
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Guobin Zhang <zhanggb@motorola.com>
Submit-Approved: Jira Key
The goto statement needs to be enclosed by NVT_SENSOR_EN.
For devices where this is not defined, we have the following
build error:
+++++++++++++++++++++++++++++++++++++++++++
motorola/kernel/modules/drivers/input/touchscreen/nova_0flash_mmi/nt36xxx.c:2239:1: warning: label 'err_wakeup_source_register_failed' defined but not used [-Wunused-label]
error, forbidden warning: nt36xxx.c:2239
+++++++++++++++++++++++++++++++++++++++++++
NO_PROP_NEEDED: <only applies to bo branch>
Change-Id: Icecdcec4f169c30250c03a23006891ffb25c53bc
Reviewed-on: https://gerrit.mot.com/1705821
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Ling Jin <lingjin@motorola.com>
Submit-Approved: Sergio Vilela <sv008@motorola.com>
On latest 4.19 kernel update, wakeup_source_init API was removed.
So replacing it as follows:
- wakeup_source_init => wakeup_source_register
Also, ensure wake_source_register is compatible with all kernels.
NO_PROP_NEEDED: <only applies to bo>
Change-Id: Ic08fa612c3aa8adec0e2f485c9aa85e3a8eacdf1
Reviewed-on: https://gerrit.mot.com/1699262
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Ling Jin <lingjin@motorola.com>
Submit-Approved: Sergio Vilela <sv008@motorola.com>
On latest 4.19 kernel update, wakeup_source_init API was removed.
So, replacing it as follows:
- wakeup_source_init => wakeup_source_register
Also, ensure wake_source_register is compatible with all kernels.
NO_PROP_NEEDED: <only applies to bo>
Change-Id: I8f3b7a62c0b17456aba18400e00117507f9e1873
Reviewed-on: https://gerrit.mot.com/1699261
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Ling Jin <lingjin@motorola.com>
Submit-Approved: Sergio Vilela <sv008@motorola.com>
