qctecmdr
496d176963
Merge "ARM: dts: msm: Add usb_audio_qmi_dev node"
2020-02-18 14:35:52 -08:00
qctecmdr
f58ea18ad0
Merge "ARM: dts: msm: fix DSI reset gpio pincntrl"
2020-02-18 14:35:52 -08:00
qctecmdr
648d522e79
Merge "ARM: dts: msm: Add IPCC test nodes for end to end verification"
2020-02-18 05:47:23 -08:00
qctecmdr
a15ae5f7b3
Merge "ARM: dts: msm: Add TSENS thermal nodes for lahaina"
2020-02-17 05:20:48 -08:00
qctecmdr
16c137bea6
Merge "ARM: dts: msm: Add dt node for ST Micro touch IC"
2020-02-17 01:36:25 -08:00
qctecmdr
b0fd5a0d7a
Merge "ARM: dts: msm: Add cti trig_out gpio for Lahaina"
2020-02-17 01:36:25 -08:00
Mao Jinlong
d13e25cc7e
ARM: dts: msm: Add tpdm lpass lpi for lahaina
...
Add tpdm lpass lpi as dummy node to support tpdm lpass lpi
HW events.
Change-Id: Ic3d4f1009a1dacaf56d5d6f146e7061847a51f3f
2020-02-16 23:00:27 -08:00
Mao Jinlong
5117e923e0
ARM: dts: msm: Add cti trig_out gpio for Lahaina
...
Add pinctil setting to cti trig_out gpio and configure
trig_out gpio for Lahaina.
Change-Id: I31c766aac6a35ca5960a6fa680dfdc84652e70d7
2020-02-16 22:59:42 -08:00
Fei Mao
97bdb86fdd
ARM: dts: msm: Add dt node for ST Micro touch IC
...
Add new device tree node for touch IC on Lahaina devices.
Change-Id: Ia90a58da109502b59dd1688dcd0b4dfd4136bf8c
2020-02-16 20:40:53 -08:00
Fei Mao
bd767f2e05
ARM: dts: msm: add gpio pincntrl for touch
...
Add the GPIO pin control for touchscreen.
Change-Id: I71054e4bca0badbbf367c7937ac7f91d804288fc
2020-02-16 20:39:38 -08:00
Satya Rama Aditya Pinapala
c99983cd60
ARM: dts: msm: fix DSI reset gpio pincntrl
...
Change fixes the reset GPIO pin control for primary display.
Change-Id: I241869c6f08610486881f32f7f3c878c4ab47916
2020-02-16 18:29:21 -08:00
qctecmdr
4fb85a05a4
Merge "ARM: dts: msm: update audio device tree on lahaina"
2020-02-15 22:42:58 -08:00
qctecmdr
e9996bd48f
Merge "ARM: dts: msm: Reorganize the pinctrl node"
2020-02-15 04:45:14 -08:00
Raghavendra Rao Ananta
f256922e43
ARM: dts: msm: Reorganize the pinctrl node
...
As the size of the lahaina-pinctrl.dtsi file is huge, it's
possible that the config nodes might be placed incorrectly
under &soc{..}, instead of &tlmm{..} due to human errors.
Hence, rearrange the node such that the lahaina-pinctrl.dtsi
file itself begin with the &tlmm block to minimize these errors.
Change-Id: I537e6cc980d58470949fc99dcaa4e65b0ff75663
2020-02-14 17:28:52 -08:00
Mayank Rana
3470828f5c
ARM: dts: msm: Add VBUS/ID configuration for USB secondary port on Lahaina
...
This change adds GPIO configuration for USB VBUS/ID detection and
enabling 5v vbus in host mode. It adds extcon_usb2 device node for
using this configuration through USB extcon gpio driver for
notifying vbus/ID status on connecting USB cable.
Change-Id: I54727cc9112e74b4c8829442fc6e727bbd20beab
2020-02-14 08:40:46 -08:00
qctecmdr
5402f20056
Merge "ARM: dts: msm: Rectify I3C node DT properties"
2020-02-13 21:01:36 -08:00
qctecmdr
bc344f26ff
Merge "ARM: dts: msm: Add permittable RFA2 (min,max) voltage"
2020-02-13 21:01:36 -08:00
qctecmdr
e3fbdc595b
Merge "ARM: dts: msm: Update dtsi for page recycle and cleanup"
2020-02-13 21:01:36 -08:00
qctecmdr
83a11dc0ca
Merge "ARM: dts: msm: Disable USB secondary port on Lahaina"
2020-02-13 21:01:36 -08:00
qctecmdr
0d30d18c51
Merge "ARM: dts: msm: Add mem_dump node for lahaina"
2020-02-13 21:01:36 -08:00
qctecmdr
c9b34ab1af
Merge "ARM: dts: msm: Disable tpdm shrm for Lahaina"
2020-02-13 21:01:36 -08:00
qctecmdr
d33b1b47b4
Merge "ARM: dts: msm: disable second USB port for Lahaina QRD"
2020-02-13 21:01:36 -08:00
qctecmdr
63228cd0cc
Merge "ARM: dts: qcom: add flash/torch LEDs on PM8350C for Lahaina platforms"
2020-02-13 20:44:10 -08:00
qctecmdr
b4f4ef36fa
Merge "arm64: dts: qcom: Add secondary VM dts file for lahaina"
2020-02-13 11:21:05 -08:00
qctecmdr
faf8c414a5
Merge "ARM: dts: qcom: Reserved GuestVM memory and add its PIL driver"
2020-02-13 11:21:05 -08:00
Sudheer Papothi
5189b07f07
ARM: dts: msm: update audio device tree on lahaina
...
Update audio device tree on lahaina target.
Change-Id: If6a6fba7ae08d5d7da8124755520d56dab9e6b7c
2020-02-12 19:58:30 -08:00
Jack Pham
72cea303a6
ARM: dts: msm: Add usb_audio_qmi_dev node
...
Add the usb_audio_qmi_dev node which instantiates the
audio QMI service device used for tunneling USB audio
data to ADSP.
Also add alias entries for usb0 and usb1 which will
allow the audio driver to determine which controller
is being used.
Change-Id: I688a4a8e6234d538f025662123c56b17d5f89be5
2020-02-12 12:56:59 -08:00
qctecmdr
52faff36e4
Merge "ARM: dts: msm: update PCIe L5 and L6 current vote on lahaina"
2020-02-12 12:44:54 -08:00
qctecmdr
3375114a58
Merge "dt-bindings: haven: Add bindings for qcom,vm-1.0"
2020-02-12 12:44:54 -08:00
qctecmdr
fc434f22fd
Merge "dt-bindings: Document the qcom,dynamic-heap binding"
2020-02-12 05:13:21 -08:00
Mao Jinlong
e9931bec25
ARM: dts: msm: Disable tpdm shrm for Lahaina
...
Disable tpdm shrm due to DDRS DPM feature is disabled in Lahaina.
Change-Id: I53117f304d93ff0901dd4eff9b92c7bacabd6dbe
2020-02-12 03:50:37 -08:00
Mao Jinlong
99dfe223ae
ARM: dts: msm: Enable turing llm tpdm for lahaina
...
Enable turing llm tpdm as a dummy source to support turing llm
HW trace.
Change-Id: If186766759cf4d0d04bd210109d21a6fd882afe1
2020-02-12 03:50:30 -08:00
Mao Jinlong
cd2ce73fcc
ARM: dts: msm: Add mem_dump node for lahaina
...
Add mem_dump node to support memory dump.
Change-Id: I817d67a55eed0cfa2db9e8283cd55c4aea097a93
2020-02-12 00:48:23 -08:00
Linyu Yuan
46536afd9d
ARM: dts: msm: disable second USB port for Lahaina QRD
...
Disable hs phy, ss phy and controller.
Change-Id: I8791b728278a21a7e285e13d98e9b9c5c3f7da8b
2020-02-12 12:04:34 +08:00
Elliot Berman
02385af852
dt-bindings: haven: Add bindings for qcom,vm-1.0
...
Add bindings for qcom,vm-1.0.
Change-Id: I2a66e50fd0d819d8b49fd14f89e09bc27135764a
2020-02-11 16:15:03 -08:00
Subramanian Ananthanarayanan
d6d58a5e3d
ARM: dts: msm: Rectify I3C node DT properties
...
Made changes for I3C instance SE address, interrupts,
GPIO states.
Change-Id: Ieb65424183693f78dfd4679e5956b249fae7ad80
2020-02-12 00:14:15 +05:30
Subbaraman Narayanamurthy
beb07652ab
ARM: dts: qcom: add flash/torch LEDs on PM8350C for Lahaina platforms
...
Add flash/torch LED devices on PM8350C that are needed to support
camera flash on Lahaina platforms. Note that this changes doesn't
add HW strobe configuration.
Change-Id: Id8b3f912551b9e895fbd1f96a7200e1fd89d7767
2020-02-11 10:34:58 -08:00
Mayank Rana
d7933c8f9d
ARM: dts: msm: Disable USB secondary port on Lahaina
...
Enabling USB secondary port results into multiple crashes due to
other depedency is not into place. Hence for temporary disable
USB secondary port on Lahaina.
Change-Id: I9986f95389d556612347fbbd9fe9425a3f3d6b5a
2020-02-11 09:05:10 -08:00
qctecmdr
4d5b70c563
Merge "ARM: dts: msm: Limit ETR iova range for lahaina"
2020-02-11 06:56:29 -08:00
Prakruthi Deepak Heragu
a62531081b
ARM: dts: qcom: Reserved GuestVM memory and add its PIL driver
...
Reserved Guest VM memory for PIL loading and create content for GuestVM
driver.
Change-Id: I41bec5f4fc35704a2b1776a21dd1587fd6580755
2020-02-10 13:45:44 -08:00
Prakruthi Deepak Heragu
3c11e90a84
dt-bindings: Add bindings for guestvm-loader
...
Add bindings for guestvm-loader.
Change-Id: I19904980acf4b8548d2d65781fe1bfd2528c8069
2020-02-10 13:45:42 -08:00
Mahesh Kumar Sharma
48398a796e
ARM: dts: msm: Add permittable RFA2 (min,max) voltage
...
- S12B can not supply power more than 1.25V so restricting
it to permittable voltage range.
- Enable UART for bluetooth.
Change-Id: I83d3a0a5bffdc9a66b921d23a69a78a59c4a2fa7
2020-02-10 13:06:41 -08:00
qctecmdr
ea70d133e2
Merge "ARM: dts: msm: limit gear to 3 for Lahaina"
2020-02-09 21:05:45 -08:00
Mao Jinlong
e87159c5db
ARM: dts: msm: Limit ETR iova range for lahaina
...
Limit the addresses mapping for dma for tmc etr.
Change-Id: I21a774f4ae5e22b8acd30d66a4808723f5cfb441
2020-02-08 19:23:39 -08:00
Prakruthi Deepak Heragu
bd557549eb
ARM: dts: msm: Add IPCC test nodes for end to end verification
...
Add ping test nodes for all subsystems inorder to test the
IPCC infrastructure.
Change-Id: I850f13472697e768c6f409e8f08d27e17e7c9a68
2020-02-08 12:14:14 -08:00
Manikandan Mohan
430f4fb3a3
ARM: dts: msm: Add CNSS2 node for Lahaina
...
Add CNSS2 device tree entry for WLAN HSP parameters.
Change-Id: I73b6f386adbc981819c6bdfd3819b551781a7e70
2020-02-08 12:13:18 -08:00
qctecmdr
5d47014415
Merge "ARM: dts: qcom: Link restart_reason nvmem cell to qcom,pshold"
2020-02-08 06:26:42 -08:00
qctecmdr
ee6ea06489
Merge "ARM: dts: msm: Add QSEE IRQ bridge entry for Lahaina"
2020-02-08 06:26:42 -08:00
qctecmdr
2fae20ada9
Merge "ARM: dts: qcom: update RPMh regulator min/max voltage limits for Lahaina"
2020-02-08 00:48:03 -08:00
qctecmdr
36ac4250af
Merge "dt-bindings: Add device-tree bindings for the memory sharing driver"
2020-02-08 00:48:03 -08:00