- fix clock controller register sizes
- new board: Endless Mini (EC-100) by Endless Mobile
- add voltage regulators
-----BEGIN PGP SIGNATURE-----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=U6kf
-----END PGP SIGNATURE-----
Merge tag 'amlogic-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt
ARM: dts: Amlogic updates for v4.20
- fix clock controller register sizes
- new board: Endless Mini (EC-100) by Endless Mobile
- add voltage regulators
* tag 'amlogic-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
ARM: dts: meson8b: odroidc1: add stdout-path property
ARM: dts: meson8b: odroidc1: enable the SAR ADC
ARM: dts: meson8b: odroidc1: add the fixed voltage regulators
ARM: dts: meson8b: odroidc1: add the CPU voltage regulator
ARM: dts: meson8b: Add support for the Endless Mini (EC-100)
ARM: dts: meson8b: add the RMII pins
ARM: dts: meson8b: add the I2C_A, PWM_C and UART_B pins
dt-bindings: arm: amlogic: Add the Endless Mobile Endless Mini (EC-100)
dt-bindings: add vendor prefix for "Endless Mobile, Inc."
ARM: dts: meson8b: fix the clock controller register size
ARM: dts: meson8: fix the clock controller register size
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
SPI controller nodes should be named 'spi' rather than 'ssp'. Fixing the
name enables dtc SPI bus checks.
Cc: Vladimir Zapolskiy <vz@mleia.com>
Cc: Sylvain Lemieux <slemieux.tyco@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
SPI controller nodes should be named 'spi' rather than 'ssp'. Fixing the
name enables dtc SPI bus checks.
Cc: Chanho Min <chanho.min@lge.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
dtc has new checks for SPI buses. Fix the warnings in node names.
arch/arm64/boot/dts/amd/amd-overdrive.dtb: Warning (spi_bus_bridge): /smb/ssp@e1030000: node name for SPI buses should be 'spi'
arch/arm64/boot/dts/amd/amd-overdrive-rev-b0.dtb: Warning (spi_bus_bridge): /smb/ssp@e1030000: node name for SPI buses should be 'spi'
arch/arm64/boot/dts/amd/amd-overdrive-rev-b1.dtb: Warning (spi_bus_bridge): /smb/ssp@e1030000: node name for SPI buses should be 'spi'
Cc: Brijesh Singh <brijeshkumar.singh@amd.com>
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
SPI controller nodes should be named 'spi' rather than 'ssp'. Fixing the
name enables dtc SPI bus checks.
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The AS370 SoC is a new derivative of the berlin family. However, the
SoC isn't named as berlin*.
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Move berlin binding documentation as part of transition from Marvell
berlin to Synaptics SoC.
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Acked-by: Rob Herring <robh@kernel.org>
To use the "earlycon" kernel command line parameter (without arguments)
we need a stdout-path property under the /chosen node. Add this to make
it easier to spot errors early in the boot process when looking for
them.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Odroid-C1 exposes ADC channels 0 and 1 on the GPIO headers. NOTE: Due
to the SoC design these are limited to 1.8V (instead of 3.3V like all
other pins).
Enable the SAR ADC to enable voltage measurements on these pins.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
There are multiple fixed regulators on the Odroid-C1 board. Add them so
they can be used when we add the devices that need them (SAR ADC needs
the 1.8V IOREF, RTC needs VDD_RTC).
These are:
- P5V0 is the main 5V power input
- VCC3V3 / VDDIO_AO3V3 / VDD3V3: fixed regulator with 3.3V output which
is supplied by P5V0
- IOREF_1V8 / VCC1V8 / VDD1V8: fixed regulator with 1.8V output which is
supplied by P5V0
- VDD_RTC: fixed voltage regulator with 0.9V output which is supplied by
VDDIO_AO3V3
- DDR_VDDC / DDR3_1V5: fixed voltage regulator with 1.5V output which is
supplied by P5V0
- the existing TF_IO and RFLASH_VDD_EN regulators are supplied by
VDDIO_AO3V3
- the existing VCCK regulator is supplied by P5V0
This does not add the missing VDDEE regulator (controlled by PWM_D)
because it's not clear yet how to configure the voltage of that
regulator.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
The CPU voltage regulator is a "Monolithic Power Systems MP2161"
(according to the Odroid-C1+'s schematics). It is driven by PWM_C on
GPIODV_9.
Hardkernel's 3.10 kernel (based on the Amlogic GPL kernel sources)
defines a PWM voltage table with the following values:
- 0.86 volts = PWM register value 0x10f001b
- (more values in 0.1 volt increments)
- 1.14 volts = PWM register value 0x000012a
When using the XTAL (24MHz) as input this translates into a PWM period
of 12218ns with 0.86V using a duty cycle of 91% and 1.14V using a duty
cycle of 0%.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
The Endless Mini (EC-100) is a grapefruit-sized computer based on the
Amlogic Meson8b (S805) SoC which comes in two variants.
Both variants have in common:
- Amlogic Meson8b (S805) SoC
- two USB 2.0 ports on the rear, one one the front (connected to the SoC
through an internal hub)
- 3.5mm Stereo out and MIC combo port
- HDMI and CVBS output
- 5V power supply (rated at 3A / 15W)
- an internal embedded micro-controller (called "EC") which implements a
"breathing" effect for the LED and allows shutting down (powering off)
the whole device
- 10/100 Mbit/s Ethernet using an IC Plus IP101A/G PHY (note: the website
incorrectly lists a Gigabit Ethernet port)
- the CPU voltage is regulated using a PWM regulator. The GPL sources of
the EC-100 are using a PWM value of 0x1c0000 for 0.86V and a PWM value
of 0x00001c for 1.14V. When using the XTAL (24MHz) as input this
translates into a PWM period of 1148ns with 0.86V using a duty cycle of
100% and 1.14V using a duty cycle of 0%.
The main differences are:
- the main indicator for the variant is the RAM size: the "cheaper"
variant has 1 GB of RAM, while the more expensive one comes with 2GB
- the storage size differs: 24 GB vs 32 GB
- the "1 GB RAM" variant has Ethernet connectivity only, while the "2 GB"
variant has a Realtek RTL8723BS SDIO chip which adds 802.11b/g/n wifi
and Bluetooth 4.0 support
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Some boards use an RMII Ethernet PHY which requires fewer pins than the
RGMII PHYs. Add a separate eth_rmii_pins node which does not include the
pins which are only required for RGMII (but not for RMII) PHYs.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
These are used for example on the Endless Mini (EC-100):
- I2C_A is connected to the Realtek RT5640 audio codec
- PWM_C (GPIODV_9) is connected to a PWM regulator which is used for
VCCK (CPU voltage supply)
- UART_B is connected to the Bluetooth module (of the RTL8723BS SDIO
wifi and Bluetooth combo chip)
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Add bindings documentation for the Endless Mini (EC-100) from Endless
Mobile.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Endless Mobile, Inc. started selling (small) computers in 2015.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
1. Bring up DSI and HDMI on Exynos5250 Arndale.
2. Use the new way of setting external wakeup interrupts on S5Pv210.
3. Use proper cpufreq suspend OPP to fix suspend/wakeup from RAM on Snow
Chromebook (Exynos5250).
4. Fully describe regualtors on Odroid XU3-family boards.
5. Fix sound in Snow-rev5 Chromebook.
6. Fix regulators configuration on Peach Pi/Pit Chromebooks (Exynos5420)
which should be always on.
7. Fix pull control on PMIC interrupt lines on multiple boards which
essentially fixes waking up by RTC.
8. Add PMIC interrupts on Exynos4210 UniversalC210 board.
9. Add external SD card support for Trats board (Exynos4210).
10. Correct audio subsystem parent clock on Peach Chromebooks.
11. Minor cleanups.
-----BEGIN PGP SIGNATURE-----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=WT7h
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt-4.20-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt
Samsung DTS ARM changes for v4.20
1. Bring up DSI and HDMI on Exynos5250 Arndale.
2. Use the new way of setting external wakeup interrupts on S5Pv210.
3. Use proper cpufreq suspend OPP to fix suspend/wakeup from RAM on Snow
Chromebook (Exynos5250).
4. Fully describe regualtors on Odroid XU3-family boards.
5. Fix sound in Snow-rev5 Chromebook.
6. Fix regulators configuration on Peach Pi/Pit Chromebooks (Exynos5420)
which should be always on.
7. Fix pull control on PMIC interrupt lines on multiple boards which
essentially fixes waking up by RTC.
8. Add PMIC interrupts on Exynos4210 UniversalC210 board.
9. Add external SD card support for Trats board (Exynos4210).
10. Correct audio subsystem parent clock on Peach Chromebooks.
11. Minor cleanups.
* tag 'samsung-dt-4.20-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos: Correct audio subsystem parent clock on Peach Chromebooks
ARM: dts: exynos: Add external SD card support for Trats board
ARM: dts: exynos: Disable pull control for PMIC IRQ line on Artik5 board
ARM: dts: exynos: Disable pull control for S5M8767 PMIC
ARM: dts: exynos: Remove double SD card detect pin inversion
ARM: dts: exynos: Add missing PMIC interrupts on UniversalC210 board
ARM: dts: exynos: Disable pull control for MAX8997 interrupts on Origen
ARM: dts: exynos: Fix regulators configuration on Peach Pi/Pit Chromebooks
ARM: dts: exynos: Fix sound in Snow-rev5 Chromebook
ARM: dts: exynos: Add LDO28 regulator on Exynos5422 Odroid boards
ARM: dts: exynos: Disable unused PMIC regulators on Exynos5422 Odroid boards
ARM: dts: exynos: Add unused PMIC regulators on Exynos5422 Odroid boards
ARM: dts: exynos: Add missing used PMIC regulators on Exynos5422 Odroid boards
ARM: dts: exynos: Mark 1 GHz CPU OPP as suspend OPP on Exynos5250
ARM: dts: exynos: Convert exynos5250.dtsi to opp-v2 bindings
ARM: dts: s5pv210: Switch to S5Pv210 specific pinctrl wakeup compatible
ARM: dts: exynos: Fix HDMI-HPD line handling on Arndale
ARM: dts: exynos: Use i2c-gpio for HDMI-DDC on Arndale
ARM: dts: exynos: Add DSI and panel nodes on Arndale
ARM: dts: exynos: Add DSI node on Exynos5250
Signed-off-by: Olof Johansson <olof@lixom.net>
_ Change syntax of multiple DAI links
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=mMf1
-----END PGP SIGNATURE-----
Merge tag 'sti-dt-for-v4.20-round1' of git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti into next/dt
STi DT update:
_ Change syntax of multiple DAI links
* tag 'sti-dt-for-v4.20-round1' of git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti:
ARM: dts: stih410: change syntax of multiple DAI
Signed-off-by: Olof Johansson <olof@lixom.net>
- warning fiwes from Rob
- many updates for the axentia boards
- ADC, I2S and touch screen support for sama5d2
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEXx9Viay1+e7J/aM4AyWl4gNJNJIFAluqEKUACgkQAyWl4gNJ
NJKNng//cHQkaXVeKopKCu53fceBmUfE8VLAc+YPBeXgLkZE+cAB1easg9c1nwiB
QzjkA3Wg3eI5CZURyGjSKK4oLddekdnL/cWKJ7ekQEOgXXWgcc54cVLZgi8i32yT
1uyJP0gooUe0nDNuH/8ifar8BIGcCZIHmcePSUQz5yyubczrplUrRmHEp1zfn7e6
rmJhKmGJcL9Wa7YnARWJjHI5rGjBL901Z0EOa9Jno8Sgr5VAWQ5GQ5rITz2zCVqQ
DPQHSTIsvPGuaMKD3bOBA3bUTtMBu8aKmYHOnHehLW3NLUnNeGlbBRqZP8Wh0wAA
jr67yuK7yggTS8qrnmZrJ79Fc/v4G5ghg1xd2oJu0qcd8KSv/9Xz3pPZa8zY9jbR
HuQR0LKD3zyNp/T4GHAagTOuIyK0dlSbphJVzqbPjFVgNUt6f6QKcJes2SCQOdFk
2jQtDN9bNjPDjBbBXRJQ+S1V/K3ItSkeN/ypAmfNOfjEgjgnrOu/0K8HScWRHqBX
8CvaC6SFAVvJN78ahTypQMeadarAZlzoXSlDGwSVT4FwZBSIwTxgHWnegZKzqhcw
+ThGw5YdBulGwnhyVlq8RDLw61x+t4b16NxODO8sed7PTwlDe6vMURDgRk7tvyeW
ZHGB9iqlaHYSfd0Bcom1wkQEfbnEWTTBc/1QLVTAxouW5IJ0PAw=
=jsRK
-----END PGP SIGNATURE-----
Merge tag 'at91-4.20-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into next/dt
AT91 DT for 4.20
- warning fiwes from Rob
- many updates for the axentia boards
- ADC, I2S and touch screen support for sama5d2
* tag 'at91-4.20-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
arm: dts: sama5d2: Update coresight bindings for hardware ports
ARM: dts: at91: sama5d27_som1_ek: add adc regulators
ARM: dts: atmel: Fix I2C and SPI bus warnings
ARM: dts: at91: sama5d4: add labels to soc dtsi for derivative boards
ARM: dts: at91: tse850: drop three indentation levels
ARM: dts: at91: nattis: drop three indentation levels
ARM: dts: at91: nattis: describe the lvds panel
ARM: dts: at91: nattis: move pinctrls for the lvds chip to the lvds node
ARM: dts: at91: nattis: state the actual lvds-encoder chip
ARM: dts: at91: nattis: make the SD-card slot work
ARM: dts: at91: nattis: set the PRLUD and HIPOW signals low
ARM: dts: at91/trivial: remove old NAND bindings leftover in sama5d2
ARM: dts: at91/trivial: Fix USART1 definition for at91sam9g45
ARM: dts: at91: sama5d2 Xplained: add pin muxing for I2S
ARM: dts: at91: sama5d2: add nodes for I2S controllers
ARM: dts: at91: sama5d2: add I2S clock muxing nodes
ARM: dts: at91: sama5d2: Add resistive touch device
ARM: dts: at91: sama5d2: add channel cells for ADC device
Signed-off-by: Olof Johansson <olof@lixom.net>
Commit a7eb26392b ("arm64: dts: broadcom: Add reference to Compute
Module IO Board V3") adds the bcm2837-rpi-cm3-io3.dts file as a target
in the Makefile, rather than the .dtb name. This will skip the
generation of the .dtb file at compile time and will fail the dtbs_install
target.
Fixes: a7eb26392b ("arm64: dts: broadcom: Add reference to Compute Module IO Board V3")
Signed-off-by: Liviu Dudau <liviu@dudau.co.uk>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
With change of syntax for 'simple-audio-card,dai-link' containers,
devicetrees of stih410 must be updated.
This fixes the following error:
[ 3.839466] asoc-simple-card sound: asoc_simple_card_dai_link_of:
Can't find simple-audio-card,cpu DT node
[ 3.849150] asoc-simple-card sound: parse error -22
Signed-off-by: Christophe Priouzeau <christophe.priouzeau@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
The proper parent clock for audio subsystem for Exynos5420 and Exynos5800
SoCs is CLK_MAU_EPLL. This fixes following warning:
clk: failed to reparent mout_audss to fout_epll: -22
Fixes: ed7d130707: ARM: dts: exynos: Enable HDMI audio support on Peach Pit
Fixes: bae0f445c1: ARM: dts: exynos: Enable HDMI audio support on Peach Pi
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
1. Fix imprecise abort during Odroid XU3-family suspend to RAM (but it
is not end of work needed for suspend).
2. Cleanup and fix of SD card write protect on MINI2440.
-----BEGIN PGP SIGNATURE-----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=tkOU
-----END PGP SIGNATURE-----
Merge tag 'samsung-soc-4.20' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt
Samsung mach/soc changes for v4.20
1. Fix imprecise abort during Odroid XU3-family suspend to RAM (but it
is not end of work needed for suspend).
2. Cleanup and fix of SD card write protect on MINI2440.
* tag 'samsung-soc-4.20' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: s3c24xx: Restore proper usage of pr_info/pr_cont
ARM: s3c24xx: Correct SD card write protect detection on Mini2440
ARM: s3c24xx: Consistently use tab for indenting member assignments
ARM: s3c24xx: formatting cleanup in mach-mini2440.c
ARM: s3c24xx: Remove empty gta02_pmu children probe
ARM: exynos: Fix imprecise abort during Exynos5422 suspend to RAM
ARM: exynos: Store Exynos5420 register state in one variable
Signed-off-by: Olof Johansson <olof@lixom.net>
This branch adds changes for the Texas Instruments AM654 SoC. Included
changes are:
- Add uart nodes
- Change address cells and size-cells of interconnect tfrom 1 to 2
- Add secure proxy instance for main domain
- Add DMSC support
-----BEGIN PGP SIGNATURE-----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=VyVP
-----END PGP SIGNATURE-----
Merge tag 'am654-for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux into next/dt
TI AM654 support for v4.20 merge window.
This branch adds changes for the Texas Instruments AM654 SoC. Included
changes are:
- Add uart nodes
- Change address cells and size-cells of interconnect tfrom 1 to 2
- Add secure proxy instance for main domain
- Add DMSC support
* tag 'am654-for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux:
arm64: dts: ti: k3-am6: Add Device Management Security Controller support
arm64: dts: ti: am654: Add secure proxy instance for main domain
arm64: dts: ti: am654: Add uart nodes
arm64: dts: ti: k3-am65: Change #address-cells and #size-cells of interconnect to 2
Signed-off-by: Olof Johansson <olof@lixom.net>
for 4.20, please pull the following:
- Stefan provides a reference to the Compute Module IO Board V3 such
that we can reference the arm counterpart and still build it for arm64
- Rob fixes I2C and SPI bus warnings which are going to show up with his
update to DTC scheduled for 4.20
-----BEGIN PGP SIGNATURE-----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=Ulpq
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.20/devicetree-arm64' of https://github.com/Broadcom/stblinux into next/dt
This pull request contains Broadcom ARM64-based SoCs Device Tree changes
for 4.20, please pull the following:
- Stefan provides a reference to the Compute Module IO Board V3 such
that we can reference the arm counterpart and still build it for arm64
- Rob fixes I2C and SPI bus warnings which are going to show up with his
update to DTC scheduled for 4.20
* tag 'arm-soc/for-4.20/devicetree-arm64' of https://github.com/Broadcom/stblinux:
arm64: dts: broadcom: Fix I2C and SPI bus warnings
arm64: dts: broadcom: Add reference to Compute Module IO Board V3
Signed-off-by: Olof Johansson <olof@lixom.net>
for 4.20, please pull the following:
- Rafal updates the Broadcom BCM5301x (Northstar) DTS files to use the
new style partition parser and removes the unsupported/undocumented
linux,part-probe properties that were previously introduced
- Stefan adds supports for the Raspberry Pi Compute Module 3/3Lite, he
also updates the Raspberry Pi 3B+ USB Ethernet adapter to have proper
LED configuration
- Rob fixes a bunch of SPI bus warnings in the Northstar Plus and
Hurricane 2 DTS files
- Florian documents the Broadcom roboswitch Switch Register Access Block
(SRAB) interrupts, adds the switch interrupts to the Northstar Plus
DTS include file and finally updates the BCM958625HR reference board to
have the proper SFP module definition
-----BEGIN PGP SIGNATURE-----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=OpXM
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.20/devicetree' of https://github.com/Broadcom/stblinux into next/dt
This pull request contains Broadcom ARM-based SoCs Device Tree changes
for 4.20, please pull the following:
- Rafal updates the Broadcom BCM5301x (Northstar) DTS files to use the
new style partition parser and removes the unsupported/undocumented
linux,part-probe properties that were previously introduced
- Stefan adds supports for the Raspberry Pi Compute Module 3/3Lite, he
also updates the Raspberry Pi 3B+ USB Ethernet adapter to have proper
LED configuration
- Rob fixes a bunch of SPI bus warnings in the Northstar Plus and
Hurricane 2 DTS files
- Florian documents the Broadcom roboswitch Switch Register Access Block
(SRAB) interrupts, adds the switch interrupts to the Northstar Plus
DTS include file and finally updates the BCM958625HR reference board to
have the proper SFP module definition
* tag 'arm-soc/for-4.20/devicetree' of https://github.com/Broadcom/stblinux:
ARM: dts: bcm: Fix SPI bus warnings
ARM: dts: NSP: Wire up switch interrupts
dt-bindings: net: dsa: Document B53 SRAB interrupts and registers
ARM: dts: NSP: Enable SFP on bcm958625hr
ARM: dts: bcm283x-rpi-lan7515: Enable Ethernet LEDs
ARM: dts: BCM5301X: Specify flash partitions
ARM: dts: add Raspberry Pi Compute Module 3 and IO board
dt-bindings: bcm: Add Raspberry Pi CM3 and CM3L
Signed-off-by: Olof Johansson <olof@lixom.net>
New boards are the px30 eval board and roc-rk3399-pc.
The rk3328 got support for the one gpio controlled via the general
register files and the rk3399 finally got its idle-states defined.
And finally fixes and improvements for firefly-rk3399 (wifi),
roc-rk3328-cc (sdmmc-uhs, io-domains), rk3328-rock64 (gpio-regulator
pin fix) and rk3399-sapphire (gpio-regulator pin fix, pmic pin fix
and type-c port supply).
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAluaaskQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgTTdCACrfKOzRBY7rAmuo5abqWZGsAmbVLFmC/dG
ssxdF9uUAKS2vOV2OKu4364RZgBTXI4Ko+k4IT/mbQbAOduvlrcdHoB+a0IzSJJj
WGpFKTyt63uL9V34sLSXfJ7f0NevWXnBT54tisbvfOVHC+ysJ6MrvEiGl6eDcCkh
Hweejd/tzryFefgn4r2TClsGtew45cSo2ZO9IHNTaLSNxL2yz6r3jCwmWl3P7a8o
eBfvOllg/5FYKL1ybXs6/RJBOeowzOk9RBr9r2Q+7EGD6XsuU4W1DXc8wI57xwXP
bYP/JfQR/yGrJuX+eA6XxkMoGXu5VWSu6PFnyupIGpmJz2EG/kGL
=T4U2
-----END PGP SIGNATURE-----
Merge tag 'v4.20-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt
New soc support for the px30 quad-core Cortex-A35.
New boards are the px30 eval board and roc-rk3399-pc.
The rk3328 got support for the one gpio controlled via the general
register files and the rk3399 finally got its idle-states defined.
And finally fixes and improvements for firefly-rk3399 (wifi),
roc-rk3328-cc (sdmmc-uhs, io-domains), rk3328-rock64 (gpio-regulator
pin fix) and rk3399-sapphire (gpio-regulator pin fix, pmic pin fix
and type-c port supply).
* tag 'v4.20-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: Add type-c port supply on rk3399-sapphire board
arm64: dts: rockchip: fix vcc_host1_5v pin assign on rk3328-rock64
arm64: dts: rockchip: add WiFi module support for Firefly-RK3399
arm64: dts: rockchip: remove dvs2 pinctrl from pmic on rk3399-sapphire
arm64: dts: rockchip: Fix VCC5V0_HOST_EN on rk3399-sapphire
arm64: dts: rockchip: re-order vcc_sys on rk3399-sapphire
arm64: dts: rockchip: add missing vop properties for px30
arm64: dts: rockchip: Add idle-states to device tree for rk3399
arm64: dts: rockchip: add sdmmc UHS support for roc-rk3328-cc
arm64: dts: rockchip: add GRF GPIO controller to rk3328
arm64: dts: rockchip: add io-domain to roc-rk3328-cc
arm64: dts: rockchip: add PX30 evaluation board devicetree
arm64: dts: rockchip: add core dtsi file for PX30 SoCs
dt-bindings: rockchip: grf: add grf and pmugrf description for px30
arm64: dts: rockchip: add support for ROC-RK3399-PC board
Signed-off-by: Olof Johansson <olof@lixom.net>
SPI controller nodes should be named 'spi' rather than 'qspi'. Fixing the
name enables dtc SPI bus checks.
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
We need to distribute out the responsibilities of the PRCMU
registers instead of having one big lump handling everything.
By making it syscon compatible, we can start grabbing the
register map elsewhere when needed.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Switch to the new coresight bindings
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
SPI controller nodes should be named 'spi' rather than 'ssp'. Fixing the
name enables dtc SPI bus checks.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
By removing the reference to skeleton.dtsi, defining chosen {}
and proper memory nodes we get warning-free device trees for
the Ux500.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The "lcdaclk_b_1" group is muxed with the function "lcd"
but needs a separate entry to be muxed in with "lcda"
rather than "lcd".
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The unit addresses of the Cortex-A9 SCU device nodes contain too many
zeroes. Remove them.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The unit address of the Cortex-A9 SCU device node contains one zero too
many. Remove it.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
