To handle install cnss2 as module, need set dms server state after
bus init.
Change-Id: Ie6ac374193057190a69cb8e98da1771657b00f2d
Signed-off-by: Will Huang <wilhuang@codeaurora.org>
To avoid overclocking issues observed on few parts,
use floor ops for SDCC clocks.
Change-Id: I0bdb6dd540a4885f0c39f25ed97b17035e31f510
Signed-off-by: Jagadeesh Kona <jkona@codeaurora.org>
FIFO_REAL_TIME_FILL_STATUS_MASK is different for haptics HW
version V3. Update it.
Change-Id: Ida8326d89678af34ae2c3a35164ae1a7ad5f6b7b
Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>
As per the latest ipcat gpio6 func2 should be
mapped to qup6. Changes are done to support the same.
Change-Id: I57bf30916a8b51eececdeefe21ac3729bc20d903
Signed-off-by: Swetha Chikkaboraiah <schikk@codeaurora.org>
The function pil_clear_segment should be called only
when S2 mapping is success. So update clear_fw_region
accordingly.
Change-Id: Ie5bcf5b322ce347b08a575d18b7de3226027af91
Signed-off-by: Swetha Chikkaboraiah <schikk@codeaurora.org>
Existing api msm_pcie_write_reg_field() calls find_next_bit()
and results in a KASAN out of bounds error for taking in
the first parameter by typecasting as unsigned long type.
To avoid the KASAN error use __ffs() instead.
Change-Id: I9e155248e1233bbcb04ac5e2d1d6d512b3fa5387
Signed-off-by: Siddartha Mohanadoss <smohanad@codeaurora.org>
Restoring CMDQ_SEND_STATUS_TRIGGER field after XO or hardware reset can
lead to CMD13 being send as soon as CQE is turned on which can lead to
below unnecessary warnings followed by register dumps.
[ 82.554113] mmc: sdhci_cmd_irq: Got command interrupt 0x00000001 even
though no command operation was in progress.
Unset that bit before restoring CMDQ_VENDOR_SPECIFIC_CFG register.
Change-Id: Id5961ecdd68b0d7cbc1c48c116f9e862a1dfc573
Signed-off-by: Sarthak Garg <sartgarg@codeaurora.org>
For low temperature (< -25 degrees) WLAN FW need to keep
delay between WLAN EN low and HIGH. Read WLAN_EN delay
set by "wlan_en_delay" sysfs file and send it through
Host Cap request. Increase MODE_ON and TARGET_CAP QMI request
timeout to WLAN_EN delay value to accommodate delay kept
in FW for WCN6750.
Change-Id: Ic52cc94183984200f4cc3d893756bf7abeddad6d
Signed-off-by: Naman Padhiar <npadhiar@codeaurora.org>
Enable TLB conflict handling for QGKI image of holi.
Change-Id: Idbb5476c2495add61c3c659494c60f368a2e3e42
Signed-off-by: Naina Mehta <nainmeht@codeaurora.org>
Add TLB conflict fault handler and try to handle
gracefully. Check whether TLB fault can be handled
by EL2 and cause panic if EL2 is not able to handle.
Change-Id: I276ec5413411932bd8a67ed4c85ebbf66f4affcf
Signed-off-by: Runmin Wang <runminw@codeaurora.org>
Signed-off-by: Prasad Sodagudi <psodagud@codeaurora.org>
Signed-off-by: Naina Mehta <nainmeht@codeaurora.org>
It is possible that userspace can request import for secure dma buffer
that is not accessible to CP_PIXEL. There is no need to import such
buffers in KGSL. Go through the list of VMIDs for secure dma buffer
and fail import if it is not accessible to CP_PIXEL.
Change-Id: I7584ad00a964c9c40ac4c0c9b1c83a21c03c48fd
Signed-off-by: Kamal Agrawal <kamaagra@codeaurora.org>
Add proper debug logs to print return value of subsytem_get.
Change-Id: I5e210e7b32fe35ecf9688a84776385ba6e382df8
Signed-off-by: Naman Padhiar <npadhiar@codeaurora.org>
Dump stack in case of SSR failure when ignore_ssr_failure
flag is enabled for wpss on Yupik platform.
Change-Id: I98fd294b12fe7bd9b52deb15edb8d83a5113acd8
Signed-off-by: Naina Mehta <nainmeht@codeaurora.org>
Add vlan id field for ip collison struct to
handle mdpn.
Change-Id: Idf593a55781fdc727fb33924c29d1387b6489625
Signed-off-by: Armaan Siddiqui <asiddiqu@codeaurora.org>
Setting mpm_wake_ctl after enabling irq at parent PDC/GIC may cause
a false irq sometimes. Move setting mpm_wake_ctl during .irq_enable
before enabling irq at parent PDC/GIC. Since first irq is cleared
and then enabled it may clear any false irq received and pending at
GIC before enabling same.
While at this also add missing flags IRQCHIP_MASK_ON_SUSPEND and
IRQCHIP_SET_TYPE_MASKED for msmgpio irqchip.
Change-Id: I4801dd984ae5607f87045abc233dfd2d76fcadd1
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
Add four 8k, two 32k, six 64k, and one 128k prealloc slots
to accommodate memory requirements for various WLAN host DP
structures.
CRs-Fixed: 3007544
Change-Id: I6f8fcb46ad84016d9ccc5ca22a9ee9d74d8bbfea
Signed-off-by: Yeshwanth Sriram Guntuka <ysriramg@codeaurora.org>
Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
