After fw download finished, SRAM data is not stable.
Send command to clear SRAM data after fw download.
Change-Id: I298c070c39cdb3c743a277e2276183b424cc9f94
Signed-off-by: haojl2 <haojl2@motorola.com>
Reviewed-on: https://gerrit.mot.com/1372031
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
Re-creating input device on firmware upgrade is not necessary and
confuses the InputReader. Regardless whether firmware gets upgraded
or not, driver will keep the same input device (and thus associated
with it /dev/input/eventX file).
Change-Id: Ieafb2cecc934e74323081bfd97c33b990f7dea40
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/1372155
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Konstantin Makariev <kmakariev@motorola.com>
Submit-Approved: Jira Key
TP:
Download function for different touch IC is different.
Seperate flash function info common part and IC unique part
Change-Id: I31637e889e2d0cb789d53d21418e1f3a1532ae12
Signed-off-by: haojl2 <haojl2@motorola.com>
Reviewed-on: https://gerrit.mot.com/1369612
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Guobin Zhang <zhanggb@motorola.com>
Submit-Approved: Jira Key
Reviewed-on: https://gerrit.mot.com/1371168
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Reviewed-on: https://gerrit.mot.com/1371912
Enlarge USB MTU and tx/rx bulk size to 10 times
of its original size.
The kernel version may not support member max_mtu
in net_device so remove the code to set the max_mtu
to avoid compile issue on some kernel version.
Change-Id: I2756a7153e9211e2560d0efa186466095a17d271
Signed-off-by: Yonghua Yan <yanyh2@motorola.com>
Reviewed-on: https://gerrit.mot.com/1371702
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Jianhong Wang <wangjhn@motorola.com>
Reviewed-by: Zonghua Liu <a17671@motorola.com>
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Reviewed-by: Yuecai Liu <liuyc20@motorola.com>
Submit-Approved: Jira Key
The kernel version may not support member max_mtu in net_device
so remove the code to set the max_mtu to avoid compile issue on
some kernel version.
Change-Id: I32f0f80b41f72ae4be2db207d37b5c1d135af9bc
Reviewed-on: https://gerrit.mot.com/1371694
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
Enlarge USB MTU and tx/rx bulk size to 10 times
of its original size.
Change-Id: I041ff0ce434fbc49e87352850cff57eb1d94e560
Signed-off-by: Yonghua Yan <yanyh2@motorola.com>
Reviewed-on: https://gerrit.mot.com/1371106
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Zonghua Liu <a17671@motorola.com>
Reviewed-by: Yuecai Liu <liuyc20@motorola.com>
Reviewed-by: Igor Kovalenko <igork@motorola.com>
Submit-Approved: Jira Key
This driver is hard to share on all QC platform. But this project
is hoped to common for as most as product. Move it to QC audio kernel.
It's seperated on different QC platform.
Change-Id: I37202e87bf6174be7aa015ae9566d34739ed7d87
Signed-off-by: huangys <huangys@motorola.com>
Reviewed-on: https://gerrit.mot.com/1370172
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Hujun Liao <liaohj@motorola.com>
Reviewed-by: Guobin Zhang <zhanggb@motorola.com>
Submit-Approved: Jira Key
The usbin suspend may be triggered by sw command, AICL or
light flashing.
So it may cause auto power off for factory kill when test
the camera flash LED.
The bit6 of register 0x110B can indicate usbin suspend
state in all above cases.
Change-Id: I91d0412cc7bfcbb64e65711869e519a32740964a
Signed-off-by: Yonghua Yan <yanyh2@motorola.com>
Reviewed-on: https://gerrit.mot.com/1368541
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Haijian Ma <mahj8@motorola.com>
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
Only enable FPS_NAVI function if CONFIG_INPUT_EGISTEC_FPS_NAVI defined.
if not defined, do not build ets_navi_input.c
Change-Id: Ibd57c719cb33ad7254cb77272e4ac5ee7b8b664a
Signed-off-by: haojl2 <haojl2@motorola.com>
Reviewed-on: https://gerrit.mot.com/1339496
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
Reviewed-on: https://gerrit.mot.com/1367086
<linux/wakelock.h> file is only avaliable if CONFIG_HAS_WAKELOCK is
defined.
If this is not defined, use pm_wakeup_source instead.
Change-Id: I1b70e1420caf1ecfed08016134b6b972ef178663
Signed-off-by: haojl2 <haojl2@motorola.com>
Reviewed-on: https://gerrit.mot.com/1339495
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
Reviewed-on: https://gerrit.mot.com/1367085
Add selftest sys entries for TCMD.
TCMD can process selftest and get resule though those entries.
Change-Id: I389601a1a3d3945b0c4b69a75763778b94d0b053
Signed-off-by: haojl2 <haojl2@motorola.com>
Reviewed-on: https://gerrit.mot.com/1366924
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
Qcom use DRM notification in sm6125 and new platform.
Use config to support both notification callback.
Change-Id: I77b9a72fa67c0f36b9bf9fb61b31a8c44ff11c3c
Signed-off-by: haojl2 <haojl2@motorola.com>
Reviewed-on: https://gerrit.mot.com/1366921
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
Wakelock is not supported by default.
If it is not supported, use wakeup_source instead.
Change-Id: Iae27c6fc6c8f3fd6c0129f0869ae734cec59c067
Signed-off-by: haojl2 <haojl2@motorola.com>
Reviewed-on: https://gerrit.mot.com/1366919
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
Dual Battery slgorithm also needs the same AICL rerun.
Otherwise the ICL can drop and stay too low to recharge.
Change-Id: I97236a1342f24c46d14047dd0c1f6cdacd994ddb
Signed-off-by: Kenny Kessler <kenny.kessler@motorola.com>
Reviewed-on: https://gerrit.mot.com/1366736
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Ryan Lattrel <ryanl@motorola.com>
Reviewed-by: Kenneth Kessler <kennykessler@motorola.com>
Submit-Approved: Jira Key
It is found that the USB settled ICL drop down when battery
charging is disabled for full charge, but the ICL does not
adaptively increase for incremental system load or recharge.
In that case, it draws current from battery even a charger
is attached.
In order to recover from that situation, rerun AICL is an
effective way to recover the USB ICL.
Change-Id: Ic08691817bb51276187db558cdd5addd07fc85f0
Signed-off-by: Yonghua Yan <yanyh2@motorola.com>
Reviewed-on: https://gerrit.mot.com/1364085
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Kenneth Kessler <kennykessler@motorola.com>
Submit-Approved: Jira Key
As the h/w JEITA is enable by default, which will impact
the thermal charge profile in qpnp-smbcharger-mmi driver,
so disable it.
Since the h/w JEITA is not used, and mmi thermal charge
profile is used, the battery health in qpnp-smbcharger-mmi
driver should be used as the battery health property.
Change-Id: I53b8a7739f6c94307e076aad6e9234a3149db494
Signed-off-by: Yonghua Yan <yanyh2@motorola.com>
Reviewed-on: https://gerrit.mot.com/1362570
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Kenneth Kessler <kennykessler@motorola.com>
Submit-Approved: Jira Key
Enable class fingerprint only when multi fingerprint sensor enabled.
Do not change if only has one fingerprint sensor.
Change-Id: I90c85ba3399241d7652f164603cf7f571ab98118
Signed-off-by: haojl2 <haojl2@motorola.com>
Reviewed-on: https://gerrit.mot.com/1356399
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
Tested-by: Jira Key
motorola/kernel/modules/drivers/input/misc/fpc_fps_mmi/fpc1020_tee.c:
Change device_create() calling to device_create_with_groups() calling.
To make KOBJ_ADD uevent to be aware of sysfs node creating,
device_create_with_groups() but not device_create() should be called.
Change-Id: Idc85caedc7ad770791b893f4c4d65753e2e9b1c6
Reviewed-on: https://gerrit.mot.com/1352027
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Jialei Hao <haojl2@motorola.com>
Reviewed-by: Guobin Zhang <zhanggb@motorola.com>
Submit-Approved: Jira Key
Reviewed-on: https://gerrit.mot.com/1356391
Reviewed-by: Jianqi Yang <yangj@motorola.com>
This sys entry shows current fingerprint vendor.
This info is useful if multi fingerprint vendor exist in one product.
Change-Id: I77a97745802c30bb319ed3b62fc222101f6ac6ff
Signed-off-by: haojl2 <haojl2@motorola.com>
Reviewed-on: https://gerrit.mot.com/1340583
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
Reviewed-on: https://gerrit.mot.com/1322013
As fingerprint HAL need read and write fpc1020 sys entries, so those
sys entries need change owner and group to system.
If DLKM is used, after rmmod and insmod fpc1020 kernel module again,
owner and group will be root again for those sys entries.
One way to fix this is set those sys entries owner and group in
uevent.rc.
uevent.rc need be triggered by a device add uevent. So create a
fingerprint class device and move original sys entries to a class device
Change-Id: I890eb93a616973e2a454be0fea494206c066cc25
Signed-off-by: haojl2 <haojl2@motorola.com>
Reviewed-on: https://gerrit.mot.com/1340582
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
Reviewed-on: https://gerrit.mot.com/1318460
moto touch firmware update need some sys entries to accomplish this work
Add those entries.
Change-Id: Ib6789e04ba888f9ee53b7cbc00abe981b8f707c8
Signed-off-by: haojl2 <haojl2@motorola.com>
Reviewed-on: https://gerrit.mot.com/1346254
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Jun Weng <wengjun1@motorola.com>
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
Reviewed-on: https://gerrit.mot.com/1356397
Add touchscreen class sys entries.
Those entries contains IC info, which is used by FW upload
and CQA test.
Change-Id: Ie599eb3974ebc0e1ff8df1b14e25acc9b52172a6
Signed-off-by: haojl2 <haojl2@motorola.com>
Reviewed-on: https://gerrit.mot.com/1342368
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
Reviewed-on: https://gerrit.mot.com/1356395
If FOCALTECH_TOUCH_IC_NAME defined in device.mk, use this to select
different IC.
Default option is ft8719
Change-Id: I9ef108d26d1fc8aae8f63f7d2b65fff0680633e9
Signed-off-by: haojl2 <haojl2@motorola.com>
Reviewed-on: https://gerrit.mot.com/1341266
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Jianqi Yang <yangj@motorola.com>
Submit-Approved: Jira Key
Reviewed-on: https://gerrit.mot.com/1356394
This issue is due to the race between power_supply_changed()
and smb_mmi_power_supply_changed().
First, power_supply_changed() holds the battery wakelock and
releases the wakelock if battery supply change work is scheduled.
And then, qpnp-smbcharger-mmi driver set the supply changed flag
to be true, call smb_mmi_power_supply_changed() and wait for
battery supply change work completion, where it does not release
the wakelock as the supply changed flag becomes true.
Finally, the battery wakelock will not be released any more.
Change-Id: I57f4728cb6510acce004d5d84489695035c10eaf
Signed-off-by: Yonghua Yan <yanyh2@motorola.com>
Reviewed-on: https://gerrit.mot.com/1357520
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Kenneth Kessler <kennykessler@motorola.com>
Submit-Approved: Jira Key
NXP patch to fix (CR)
Issue description:
No sound issue has been found in handheld mode
in one of Moto Projects, SurfNa project(tfa9871,
driver code Ver6.5.0). About 1/600 chance
root cause:
If set SBSL=1, the AMPE usually can be AMPE=1 automatically.
But sometimes can’t be set AMPE=1 by itself.
So AMPE must be set to 1 manually in code.
Dependency on automatic AMPE setting is not a wise way.
In driver 6.5.0, there’s no code to set AMPE during profile switch,
but boot up sequence has already been added.
Solution:
Add AMPE=1 operation in profile switching
Change-Id: I3de27e826d39c93f2d011d0f9d8fe9877e8efc89
Signed-off-by: guoyf2 <guoyf2@lenovo.com>
Reviewed-on: https://gerrit.mot.com/1358094
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Zhengming Yao <yaozm1@lenovo.com>
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key
