Retrieve the stored TWT wake duration for a session for
to send it as part of get twt statistics response.
Change-Id: If3c23d05331d5dfb43f74f5380e81eaf2799d2e7
CRs-Fixed: 2859812
When TWT teardown is received, driver sets the twt setup done
flag to false and clears the TWT dialog id/state for the TWT
session irrespective of the teardown status sent by firmware.
This causes TWT session deletion even if ack is not received for
TWT teardown frame or internal error due to which TWT teardown
frame was not sent over air.
Don't clear the TWT sesson if teardown failure due to internal
error or no ack is received for TWT frame.
Change-Id: I7d5cf423c3cd0d4be9bb2ff0b238a3fa069783cf
CRs-Fixed: 2866195
Check if a TWT session has been created for the dialog_id given
in get and clear stats command request. Reject it in driver if
session doesn't exist.
Change-Id: Ie9a761128e3a0188c4ece9a7bac58268a2ebb88f
CRs-Fixed: 2864284
The QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_INTVL_MANTISSA attribute
should be specified in multiples of TU. Correct the logic to
multiply it by 1024 to get wake interval mantissa in microseconds.
Change-Id: I2c6eb3ca5541b97cffbe0de44351571839fa00e6
CRs-Fixed: 2862107
The current get params logic sends wake_interval_us
without converting to multiples of TU. Correct it to
send the get status wake interval in multiples of TU to the
userspace
Change-Id: Ib583581287f9440e438ef3296ea48ef1148ae083
CRs-Fixed: 2862651
Driver doesn't clear the stored dialog id for TWT session when
TWT setup returns failure. This causes subsequent TWT sessions
to fail.
Reset the TWT session state and clear the dialog id for the
failed TWT setup to allow the next TWT setup commands.
Change-Id: I2f0ccb7a07ef49011b01d7336389d6ce56315fe9
CRs-Fixed: 2865240
Allow TWT teardown event from firmware after roaming or peer
initiated teardown to indicate the value to userspace. Also
make changes to send the wake duration value in microseconds
scaled with the TWT wake duration multiplication factor.
Change-Id: Ibcd0c51b1930094e0efc3832db5b8aadaa5748ea
CRs-Fixed: 2859775
Support has been added in common code to register both
common tx ops and MC/WIN specific tx ops. Add support to
register and tx ops for MC specific stats.
Change-Id: I4e5263e4685a707008ec3c5e96f50c707b071fe9
CRs-Fixed: 2851256
Change TWT nudge command to be asynchronous. Handle wake
time tsf field in the nudge command response.
Change-Id: I22c75a42bf60f52f52d7d7fe19f408ebb55f360a
CRs-Fixed: 2847173
Add support to include the session state in TWT status query
response. Session state is set to active once setup is
complete and when resume response event is received from
firmware. Session state is suspend when suspend response
event is received from firmware.
Change-Id: I1f47947c05f80bd85199fd81b951dc54deacdc09
CRs-Fixed: 2854500
Add support to get the following TWT target capabilities
1) Nudge 2) all twt and 3) statistics
Change-Id: If74e99b0ff920481bcabb0300129b9067082d113
CRs-Fixed: 2854927
Implement support for sending new control path stats
infrastructure via WMI_REQUEST_CTRL_PATH_STATS_CMDID and
WMI_CTRL_PATH_STATS_EVENTID in cp stats component. Also add
support for TWT Get statistics through this new method.
Change-Id: I62b3a525cde797cd5b809ca9e8e6c91d5651c6b4
CRs-Fixed: 2851016
Add support to handle twt_notify event. Firmware can
terminate a TWT session without a Host trigger due to internal
reasons. In that case it sends an event to notify that it is
again ready for a TWT session setup.
Change-Id: I3508687cee93e16a26221a1bc7ad9c626a4f4523
CRs-Fixed: 2847158
Don't allow TWT commands back to back till response for
existing command is not received.
Reject the new command till the existing command completion
event is received from firmware. Allow TWT teardown when
any other command is in progress after TWT setup is complete.
Change-Id: I9282230c7cb24691b44ddfd273972272fd80f44b
CRs-Fixed: 2853515
Create TWT context in peer object to store the TWT session
related parameters. Introduce mlme api to get/set various
twt session parameters for the peer.
Block the below commands till TWT setup is complete.
TWT GET
TWT Pause
TWT resume
TWT terminate
Add new files for TWT specific functionality in MLME component:
components/mlme/core/inc/wlan_mlme_twt_api.h
components/mlme/dispatcher/inc/wlan_mlme_twt_public_struct.h
components/mlme/dispatcher/inc/wlan_mlme_twt_ucfg_api.h
components/mlme/core/src/wlan_mlme_twt_api.c
components/mlme/dispatcher/src/wlan_mlme_twt_ucfg_api.c
Also return error to userspace if back to back TWT setup
command is received before TWT setup response is received from
firmware or already TWT setup is complete for given dialog id
Change-Id: I61e24dd41dc9dcb78fdfe33ef8fa0ecb374a4a72
CRs-Fixed: 2847213
Add a NULL check before calling rps_enable callback
from ipa_set_rps_per_vdev and also add a check to avoid
disabling rps twice.
Change-Id: Ib63b2cda99aa332905df640ffa2d401c22845ad2
CRs-Fixed: 2876490
Call qdf_check_state_before_panic with caller function name and
line number details.
Change-Id: I9fb4b382576e52bc1ad7e316bd09e3124e8fce98
CRs-Fixed: 2857671
Currently driver fills unicast, multicast & auth mode values from
csr session which is not updated after roaming to AP with different
security profile. This causes incorrect values in AP profile
command and subsequent roaming fails.
Send correct authmode/unicast and multicast ciphers in AP profile
command to firmware. Fill the values from the crypto component.
Also modify the below 2 ini default values as:
candidate_min_rssi_for_beacon_miss=-75
candidate_min_rssi_for_disconnect=-75
Change-Id: I33cc9f516447071e977768f01738eea7a2ecd99c
CRs-Fixed: 2879943
As a result of long path names and a large number of source files,
combined with upstream kernel build infrastructure changes, the
qcacld-3.0 build may encounter E2BIG errors when linking the final
wlan.o. To address this problem support for nested composite objects
is being added to the kernel. Update the Kbuild with the logic
required to take advantage of the nested composite support.
Change-Id: Ic6748517a922fc03a43acab2b44133b37e02707a
CRs-Fixed: 2861273
Currently UMAC_INTERFACE_MGR_OBJS are added to OBJS when
CONFIG_INTERFACE_MGR is enabled. An upcoming change requires that
assignments to OBJS be unconditional, so relocate the condition to
wrap the assignment of UMAC_INTERFACE_MGR_OBJS.
Change-Id: Ibfac21851b6a27a532cbe28a9be86909ea093e5d
CRs-Fixed: 2874549
Currently the qdf_lro.o rule is not located with the other QDF_OBJS
rules, so relocate it so that all of the QDF rules are contiguous.
Change-Id: Ia4d6e133901af900d5f63208e14ac24501ac005e
CRs-Fixed: 2868050
Currently the definitions of the Direct Buffer RX component are
defined in the middle of the WMA component definitions. Relocate these
definitions so that the WMA definitions are contiguous.
Change-Id: I3f83b70a18131a84cb262840103e705862498bc4
CRs-Fixed: 2868049
Currently HTT_OBJS are added to OBJS when CONFIG_LITHIUM is not
enabled. An upcoming change requires that assignments to OBJS be
unconditional, so relocate the condition to wrap the assignment of
HTT_OBJS.
Change-Id: Ifdce8f5ab6b4597156341620ae101ee8be2b4afd
CRs-Fixed: 2868008
Currently HAL_OBJS are added to OBJS when CONFIG_LITHIUM is enabled.
An upcoming change requires that assignments to OBJS be
unconditional. Fortunately the assignment of .o files to HAL_OBJS is
already conditional upon CONFIG_LITHIUM so remove the condition from
the assignment to OBJS.
Change-Id: I0dd7ca874561ff6c6cd8ccfdae1775f6dcb9bf12
CRs-Fixed: 2868007
Currently FWLOG_OBJS are added to OBJS when
CONFIG_FEATURE_FW_LOG_PARSING is enabled. An upcoming change requires
that assignments to OBJS be unconditional, so relocate the condition
to wrap the assignment of FWLOG_OBJS.
Change-Id: I6b09d9dfa2553943d3bb4370dc1977106a14a7d5
CRs-Fixed: 2868006
Currently EPPING_OBJS are added to OBJS when CONFIG_FEATURE_EPPING is
enabled. An upcoming change requires that assignments to OBJS be
unconditional, so relocate the condition to wrap the assignment of
EPPING_OBJS.
Change-Id: I69f9b1b707c9475a393f89f2297e90e4ee8d1e5e
CRs-Fixed: 2868005
Currently DFS_OBJS are added to OBJS when
CONFIG_WLAN_DFS_MASTER_ENABLE is enabled. An upcoming change requires
that assignments to OBJS be unconditional, so relocate the condition
to wrap the assignment of DFS_OBJS.
Change-Id: I0c04087feb76c7fbbaa4231f1c36a83624e54482
CRs-Fixed: 2868004
Currently FWOL_OBJS are added to OBJS when CONFIG_WLAN_FW_OFFLOAD is
enabled. An upcoming change requires that assignments to OBJS be
unconditional, so relocate the condition to wrap the assignment of
FWOL_OBJS.
Change-Id: I103628406108b0ca1d8290f61e379c796a63bce5
CRs-Fixed: 2868003
Currently OCB_OBJS are added to OBJS when CONFIG_WLAN_FEATURE_DSRC is
enabled. An upcoming change requires that assignments to OBJS be
unconditional. Fortunately the assignment of .o files to OCB_OBJS is
already conditional upon CONFIG_WLAN_FEATURE_DSRC so remove the
condition from the assignment to OBJS.
Change-Id: I011aa37270b8024d2f558bdb18aac2a02e3c1026
CRs-Fixed: 2868002
Currently IPA_OBJS are added to OBJS when CONFIG_IPA_OFFLOAD is
enabled. An upcoming change requires that assignments to OBJS be
unconditional. Fortunately the assignment of .o files to IPA_OBJS is
already conditional upon CONFIG_IPA_OFFLOAD so remove the condition
from the assignment to OBJS.
Change-Id: I16217146d44b790298e47516c28e1ce6445ffed6
CRs-Fixed: 2868001
Currently PKTLOG_OBJS are added to OBJS when CONFIG_REMOVE_PKT_LOG is
not enabled. An upcoming change requires that assignments to OBJS be
unconditional, so relocate the condition to wrap the assignment of
PKTLOG_OBJS.
Change-Id: I34b9bea3186e5bda12e7ce0d8a1327383170b6c1
CRs-Fixed: 2868000
Currently HOST_DIAG_LOG_OBJS are added to OBJS when BUILD_DIAG_VERSION
is enabled. An upcoming change requires that assignments to OBJS be
unconditional, so relocate the condition to wrap the assignment of
HOST_DIAG_LOG_OBJS.
Change-Id: Icdf6898b848f682d9617537394651f533ba81553
CRs-Fixed: 2867999
Currently DISA_OBJS are added to OBJS when CONFIG_WLAN_FEATURE_DISA is
enabled. An upcoming change requires that assignments to OBJS be
unconditional. Fortunately the assignment of .o files to DISA_OBJS is
already conditional upon CONFIG_WLAN_FEATURE_DISA so remove the
condition from the assignment to OBJS.
Change-Id: I2130b8efe12e5366b40856704d62d000a4e474f4
CRs-Fixed: 2867998
Currently ACTION_OUI_OBJS are added to OBJS when
CONFIG_WLAN_FEATURE_ACTION_OUI is enabled. An upcoming change requires
that assignments to OBJS be unconditional. Fortunately the assignment
of .o files to ACTION_OUI_OBJS is already conditional upon
CONFIG_WLAN_FEATURE_ACTION_OUI so remove the condition from the
assignment to OBJS.
Change-Id: Icf1c4f061286e3ae88344b380deff4bf135143e1
CRs-Fixed: 2867997
Currently PKT_CAPTURE_OBJS are added to OBJS when
CONFIG_WLAN_FEATURE_PKT_CAPTURE is enabled. An upcoming change
requires that assignments to OBJS be unconditional. Fortunately the
assignment of .o files to PKT_CAPTURE_OBJS is already conditional upon
CONFIG_WLAN_FEATURE_PKT_CAPTURE so remove the condition from the
assignment to OBJS.
Change-Id: If9083c5ba382e1ae1a638b77e12437a707b69073
CRs-Fixed: 2867996
Currently FTM_TIME_SYNC_OBJS are added to OBJS when
CONFIG_FEATURE_WLAN_TIME_SYNC_FTM is enabled. An upcoming change
requires that assignments to OBJS be unconditional. Fortunately the
assignment of .o files to FTM_TIME_SYNC_OBJS is already conditional
upon CONFIG_FEATURE_WLAN_TIME_SYNC_FTM so remove the condition from
the assignment to OBJS.
Change-Id: I57fd2c08f6c732018d50a232156e3b29c0fac285
CRs-Fixed: 2867921
Currently UMAC_GREEN_AP_OBJS are added to OBJS when
CONFIG_QCACLD_FEATURE_GREEN_AP is enabled. An upcoming change requires
that assignments to OBJS be unconditional, so relocate the condition
to wrap the assignment of UMAC_GREEN_AP_OBJS.
Change-Id: If3e3a97d39c7f347c2ff91bcd3db86675dcaa664
CRs-Fixed: 2867913
Currently UMAC_CRYPTO_OBJS are added to OBJS when
CONFIG_CRYPTO_COMPONENT is enabled. An upcoming change requires that
assignments to OBJS be unconditional, so relocate the condition to
wrap the assignment of UMAC_CRYPTO_OBJS.
Change-Id: I28ca48d6876307814ce440a3fe53cb8f8df1d42f
CRs-Fixed: 2867906
Currently DP_OBJS are added to OBJS when CONFIG_LITHIUM is enabled.
An upcoming change requires that assignments to OBJS be unconditional.
Fortunately most of the assignments to DP_OBJS are already protected
by this feature. Update the logic so that all of the assignments are
protected, and remove the condition from the OBJS assignment.
Change-Id: Icc7d015831d8940bf1d91335be1439a70965801f
CRs-Fixed: 2867900
Currently hal_rx_flow.o is assigned to DP_OBJS, but since this is a
HAL file, change the assignment to HAL_OBJS.
Change-Id: Ie7c56300d3dd60b52305b5b3c7ace58c6e8cdb57
CRs-Fixed: 2867882
Currently TXRX3.0_OBJS are added to the OBJS aggregation only when
CONFIG_WLAN_FEATURE_DP_RX_THREADS is enabled. However only one of the
object files, dp_rx_thread.o, should be controlled by that feature.
Update the logic to conditionally add dp_rx_thread.o to TXRX3.0_OBJS,
to encapsulate all TXRX3.0_OBJS assignments within CONFIG_LITHIUM,
and unconditionally add TXRX3.0_OBJS to OBJS.
Change-Id: I6ceeafeab43a960277a1870daff5566288199ada
CRs-Fixed: 2867843
There are currently two different places where ol_txrx_event.o is
added to the final target object list. As part of ongoing Makefile
cleanup consolidate these to a single location.
Change-Id: Id342ae771830f5fd4d65c6c5523c36f1e50bc941
CRs-Fixed: 2867841
