It is sometimes observed that afe could send multiple wakeup
events at a time. Avoid this by handling wakeup event only once
per swr suspend.
Change-Id: Ieb9ed1b18c8c93cb7db4b75e3411cc25838be492
Signed-off-by: Ramprasad Katkam <katkam@codeaurora.org>
Pop is observed on HPH playback start. Enable SWR port
config setup before HPH PA enable.
Change-Id: I2253be1c7e4d8df2bffd7bd0396ceb72a5018637
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
If interrupt indicates a fault in multichannel case,
reset all cluster devices in a specific order.
Change-Id: I077ff65c5f2b5e656fcdf6533fde04eba426e322
Signed-off-by: Romed Schur <rschur@codeaurora.org>
AFE supports now MI2S interfaces with up to 16 channels.
Add new APR API functions to support this.
Add support for senary PCM/MI2S ports.
Change-Id: I18d48eed4e9a0476363220e959a0f254aa292056
Signed-off-by: Dieter Luecking <dieterl@codeaurora.org>
Signed-off-by: Mangesh Kunchamwar <mangeshk@codeaurora.org>
The format change event signaling for EP92 HDMI input is adapted
to provide format information through sysfs nodes.
Chip configuration is done through sysfs as well.
Change-Id: I8c930ca5647899b4434272009699763c32fe9d04
Signed-off-by: Ralf Herz <rherz@codeaurora.org>
Signed-off-by: Mangesh Kunchamwar <mangeshk@codeaurora.org>
Add app type configuration support for DSP transcode
loopback to enable the required PP topologies.
Change-Id: I60ee50d78ba3c0edc9df042a2a86e691d62f24b7
Signed-off-by: Siddartha Shaik <sshaik@codeaurora.org>
Signed-off-by: Surendar Karka <skarka@codeaurora.org>
Mixer control queue handling is required only for
playback. Move mixer control queue handling to be
part of the playback stream in DSP transcode loopback
driver.
Change-Id: Ia8067237f80d509f969cf454f5afa08aaa6b0e52
Signed-off-by: Siddartha Shaik <sshaik@codeaurora.org>
Signed-off-by: Surendar Karka <skarka@codeaurora.org>
Update passthrough mode to pick proper path type for
compressed input data port in transcode loopback driver
to support compressed input in DSP loopback.
Change-Id: Ib2f66b467456787e08265a0da2bd85bb881a5d61
Signed-off-by: Siddartha Shaik <sshaik@codeaurora.org>
Signed-off-by: Surendar Karka <skarka@codeaurora.org>
Add new dailnks in machine driver to support
compress loopback usecase for HDMI and BT sink.
Change-Id: Ie9658b3c06fd8d9a68b9b2317fe2689fa34a96f5
Signed-off-by: Surendar Karka <skarka@codeaurora.org>
Signed-off-by: Mangesh Kunchamwar <mangeshk@codeaurora.org>
Add new FE dais and their routings to support
compress loopback usecase for HDMI and BT sink.
Change-Id: I95d683ff22cda0e7d52333e7dabbb7694cb254f3
Signed-off-by: Surendar Karka <skarka@codeaurora.org>
Signed-off-by: Mangesh Kunchamwar <mangeshk@codeaurora.org>
Modify snd_event stub functions prototype as static inline
to make sure that there are no multiple definition errors
in the case of static compilation.
Change-Id: I0848be946b332df22c045b8e5fed4c39b7ee0fda
Signed-off-by: Vidyakumar Athota <vathota@codeaurora.org>
wcd interrupts can be disabled in the same interrupt
context. So use non-sync disable irq api for disabling the
interrupts to avoid a deadlock.
Change-Id: I82dda8dbcd80ba18674eea00686f6a4f54a3b340
Signed-off-by: Ramprasad Katkam <katkam@codeaurora.org>
During SSR, when the playback on speaker gets started before codec
is out of digital core power collapse, results in soundwire
register read/write failures. Check for codec power state before
enabling the soundwire during speaker device path enablement for
playback usecase to avoid soundwire register read/write failures.
Change-Id: I3b45ef0c34ad4f97aad89afaf719989ffbda7485
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
Add proper way to clear interrupts using regmap irq framework,
to avoid mismatch between interrupts handled and interrupts
cleared. wcd937x requires writing '1' and then '0' to clear
interrupt. Set a new regmap irq flag 'clear_ack' to indicate this.
Change-Id: I1346dc66735d3b5788e1cc0cfef772c9deacbfc1
Signed-off-by: Ramprasad Katkam <katkam@codeaurora.org>
Soundwire slave interrupt is only edge type, so any pending slave
side interrupts could not cause a new slave interrupt, if
they are triggered before clearing of existing interrupts.
Recursively trigger slave irq until there are no pending slave
interrupts to handle this issue.
Change-Id: I254f2467f09172490796114b48f1f0feb604ad17
Signed-off-by: Ramprasad Katkam <katkam@codeaurora.org>
Update ignore suspend for AIF in/out and dapm input/output
widgets for bolero and wcd937x codecs to avoid suspend
of codec during active usecase running even after APSS
goes to suspend.
CRs-Fixed: 2321226
Change-Id: I277129e8e657485c56414a385150c4da55382770
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
After switching from native to non-native clip,
observe slowness in clip playback content heard
on headphones. Update mclk_mux for enable sequence
based on native flag and for disable sequence
use the same setting done during enable.
CRs-Fixed: 2322232
Change-Id: I795e0620e0239b53cdfdadaf2d57acfb570c4c3b
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Excessive logging causes throttling during bootup.
Update log level from error to debug in get functions to
avoid excessive logging.
CRs-Fixed: 2321589
Change-Id: If2a23144adf76cdd9bb2d9048a967b63186d7f6e
Signed-off-by: Vignesh Kulothungan <vigneshk@codeaurora.org>
