Add support to process HTT PPDU per-user TLVs that are sent to host from
FW on PPDU Tx completions.
Change-Id: Ia05d5d0e045bfeb4143886ef3a1b075d927645fa
CRs-Fixed: 2098696
Add support for processing rssi, mcs etc fields from
PPDU status ring and delivering to CDP interface
Change-Id: I312bef20605594645bae6ec748f0b59e4d427075
CRs-Fixed: 2098696
Add support to process HTT PPDU statistics for transmit
datapath and deliver PPDU indication to CDP interface.
Change-Id: I22e757497e13ce86fb7b42112fd56555c58e97bc
CRs-Fixed: 2098696
The SYS_MSG_ID_MC_START and SYS_MSG_ID_MC_STOP message IDs are no
longer being used. so remove them.
Change-Id: I8d35a537ac2c2f7436b23033561e5d0ef09895df
CRs-Fixed: 2107075
Add more information to object manager debug prints
1. Print the string of the component taking object manager reference.
2. Print vdev & pdev id in case of failure in some vdev related functions.
3. Print vdev & vdev id in case of failure in peer related functions.
4. Fromat the prints for printing pending reference
when psoc is going brought down.
Change-Id: I75b2d1a04feb688d6e397fa28c988abb56b2a11d
CRs-Fixed: 2069665
* Log EAPOL, ARP, DHCP, MGMT, ROAM Events, ICMP, Data packets,
TX-Completions by default.
* Set default verbosity as low (existing is high)
* Throttle ICMP and Data packets if threshold exceeds.
* Enable live mode by default. Added ini entry to disable
it and configure high throughput thresh - gDptraceConfig
* Log only SA and DA for proto packets (and not 32 bytes)
* Format prints to fit in 1 line.
CRs-Fixed: 2051134
Change-Id: I2f82c38f5fda73f440c4c4c760e633904705b5a2
During soc detach, free the memory allocated for
link desc pool. This will return the 2 MB regions to
buddy allocator.
Change-Id: I1f1929525cf1d5de32321d56ec947969bebfeb93
current pci version of sleep_state_adjust is not supported on srng based targets.
Change-Id: I6ff0c78681cc15c677b6458b3a7d8b571a051925
CRs-Fixed: 2090590
Reduced the max indentation level to five.
Spilt functions to several smaller functions.
Only a few functions were split
in this commit. Rest need to be done in future commits.
Change-Id: I1c9dcf3ae12edef6bcce37023f93d062705e0142
CRs-Fixed: 2098511
Add support to fetch min and max tx power from target for
a given set of mcs, nss, chainmask, bw, and other rate flags.
Change-Id: Iafe082db81503a52bdc704d4b71d86d23788fddb
CRs-Fixed: 2061802
qcacld-2.0 to qcacmn propagation
Add changes to support PNO scan in connected state to find better Ap's
based on rssi threshold, band and rssi preference.
Change-Id: I0744297cc5269f0fe37613247c911102e293d8e9
CRs-Fixed: 2000342
The cdp_peer_ops register_ocb_peer() method currently takes a cds_ctx
parameter. Converged datapath APIs should not require the MCL-specific
CDS context, and in fact it is not required by the MCL implementation,
so remove it from all OCB peer registration APIs.
Change-Id: I8ebb49713b26ef5bbf25cc7e4b09b1b29e579844
CRs-Fixed: 2103450
Stats printing with excessive loops should not go to the console.
Avoids watch-dog bites.
Change-Id: I7b0f9d73139dff97c16f492cbd1cb2d255255b3e
CRs-Fixed: 2091039
Linux kernel 4.10 removed vm_fault->virtual_address in favor of simply
using vm_fault->address. Add conditional compilation to use the
appropriate vm_fault address field based on the version of the Linux
kernel being compiled against.
Change-Id: I3f29721888bf349a7ac4f5f62d576b668ee0abc2
CRs-Fixed: 2094806
wlan_logging_sock_svc has a reference to the vos_ctx. Since this is
obsolete, remove the reference.
Change-Id: I1256aa8a1220859911eceec8048a57856e64299a
CRs-Fixed: 2102456
The Linux Coding Style enumerates a few special cases where typedefs
are useful, but stresses "NEVER EVER use a typedef unless you can
clearly match one of those rules." The hdd_adapter_t typedef does not
meet any of those criteria, so replace references to it with a
reference to the underlying struct.
Change-Id: Ia5177a671f3657a23e88ec1a47c6ed0ac569934a
CRs-Fixed: 2100985
The Linux Coding Style enumerates a few special cases where typedefs
are useful, but stresses "NEVER EVER use a typedef unless you can
clearly match one of those rules." The hdd_context_t typedef does not
meet any of those criteria, so replace references to it with a
reference to the underlying struct.
Change-Id: I3dfe59ac92a374639faa6774a6538c5d970d3f1d
CRs-Fixed: 2100797
Using the same MSI for wake and copy engines has a number of negative
side effects. Instead, set aside a whole MSI just for the wake
notification from firmware.
Change-Id: If871b88ca255ad970dabb4a7773d2b4d3b71c3fe
CRs-Fixed: 2055359
With SLUB build in Low memory condition rx processing is taking
more time, reduce CE msg flush count for fastpath in SLUB build.
Change-Id: I8901bd770ca01997299f882394bbe99871d2400e
CRs-Fixed: 2043999
[PATCH 0/1][CR:2093711]
The client isolation feature parameters were
pass and stored but were not used for enabling/disabling.
Added the changes to enable disable the feature.
iwpriv ath0 ap_bridge 1
iwpriv ath0 get_ap_bridge
By default feature is enabled so the STA-STA packet does not
go through the bridge interface and incase the feature is disabled
packets are given to the kernel stack.
Change-Id: I76e8683a0a7e8791cf8cf743e39b7201fee39d30
This commit defines an attribute
QCA_WLAN_VENDOR_ATTR_CONFIG_LISTEN_INTERVAL which allows the currently
used listen interval to be updated using
QCA_NL80211_VENDOR_SUBCMD_SET_WIFI_CONFIGURATION. This update applies
only during the association and is done without updating the AP about
the change.
Change-Id: Ie7b2016c1d3d06c7fcb5099b53e3fc0a159cc246
CRs-Fixed: 2048443
This request ID was wrongly referred from the REQUEST_ID in
enum qca_wlan_vendor_attr_gscan_config_params which is mapped to
QCA_WLAN_VENDOR_ATTR_PNO_PASSPOINT_LIST_PARAM_NUM in PNO Config.
Hence define a different attribute to represent the request ID
for the PNO Config.
CRs-Fixed: 2095917
Change-Id: I76289468fe926f5bd157c4d37b45bbf5a0ebdfb7
If serialization module has queued some commands for particular vdev
and if that vdev gets destroyed without informing serialization
module then upon those command timeout, serialization try to point
vdev pointer which is invalid. This situation create a crash.
If serialization module has some commands pending or active for vdev
which is being destroyed then remove those commands as part of vdev
destroyed notification.
CRs-Fixed: 2099063
Change-Id: I8df9900d83bea758ca5c50cbe0edf31e06f83a4c
For DBDC/DBS cases, each radio will have a separate MAC
address. FW will provide the list to host in ready
event. Handler has been added to extract the list.
Change-Id: I6da96ae02a1f30995e3953358677090b84fc57c4
Linux kernel version 4.11 moved several signal related functions out of
linux/sched.h into linux/sched/signal.h. Add conditional compilation to
include the correct file based on the version of the Linux kernel being
compiled against.
Change-Id: Ic50a8ec0a76178b5231388983a890bdfdc4615e2
CRs-Fixed: 2094019
Enable all 3 HW Transmit rings by default to be able to tie each ring to
a CPU core for transmit datapath
Change-Id: I6f1dd011e1289f8ee603a81e373629c79af0fd3f
CRs-Fixed: 2103112
Handle the scenario where no common channel between PCL & the
favorite channel list is found.
Change-Id: I560d7ef861d89f3f4a0c63afacd0ffbf6aaa976e
CRs-Fixed: 2063060
If SAP is up & STA is coming up next(or vice versa) on a different
channel causing MCC, move SAP to cause SCC or DBS. This logic is
enabled only if gWlanMccToSccSwitchMode is set to
QDF_MCC_TO_SCC_SWITCH_FORCE_WITHOUT_DISCONNECTION or
QDF_MCC_TO_SCC_SWITCH_WITH_FAVORITE_CHANNEL.
Change-Id: I16615d828a285762133ee3533339320ef119b3d3
CRs-Fixed: 2063060
To handle back to back scheduling of sta_ap_intf_check_work, allocate the
memory used by the work dynamically.
Change-Id: Ibbcfafb2fadd2de1cca44086f9335dca86641f50
CRs-Fixed: 2070220
If STA is up & SAP is comings up on a ACS derived channel causing MCC,
move SAP to the other band if DBS is supported. This logic is enabled
only if gWlanMccToSccSwitchMode is set to
QDF_MCC_TO_SCC_SWITCH_FORCE_WITHOUT_DISCONNECTION.
Change-Id: I48d809f83921292f51ca1735bff4c4d6dd339975
CRs-Fixed: 2063060
If STA is up on a a DFS or passive or LTE unsafe channel & SAP is
comings up that causes MCC, move SAP to the other band if DBS
is supported. This logic is enabled only if gWlanMccToSccSwitchMode
is set to QDF_MCC_TO_SCC_SWITCH_FORCE_WITHOUT_DISCONNECTION.
Change-Id: I5d393a21301f3fa838f7cf38620fb1d57ae1d57a
CRs-Fixed: 2063060
If SAP is up & STA comes up or moves to a DFS or passive or LTE
unsafe channel that causes MCC, move SAP to the other band if DBS
is supported. This logic is enabled only if gWlanMccToSccSwitchMode
is non zero.
Change-Id: I56f78dfaedec31c4c41aea6ac8c66261c9ad4c91
CRs-Fixed: 2063060
In Repeater AP scenario, when STA vap starts scan, it calls this
registered DFS callback function to get the AP CAC status. If the
AP vap is performing CAC, STA vap does not start SCAN.
Change-Id: Ifa3ad0298f1b04f3fffc915f20ff81ec0cc731bf
CRs-Fixed: 2096259
To aid in debugging memory leaks, and improve the robustness of log
recovery from crash dumps, statically allocate pglog_msg in the global
scope. This allows logs to be inspected even in cases where a crash
came late in the unload process. It also improves log recovery
robustness by removing the possibility of using a NULL pointer offset
under certain memory corruptions scenarios.
Change-Id: I077198e358570661c2f3adf2704f2c48f4b2f6f8
CRs-Fixed: 2078548
Add module parameter to pass napi budget for dp interrupts. Default value is
set to 128.
Change-Id: I6b3761c6908ed9cec4e40118a657b39da6ac2532
CRs-Fixed: 2095242
Analysis:
When AP detects the RADAR, it marks the channels as RADAR found
and adds it to both NOL and precac NOL list and starts NOL and
precac_nol timer.
If the user brings down the radio while the channel is present in
NOL list, only NOL timer gets cancelled. Precac NOL timer expires after
wifi down and leads to a kernel panic.
Solution:
Cancel the zero cac NOL timer during wifi down
Change-Id: Icf932e739910a51d9dc74cf5822133258c0ba3f0
CRs-Fixed: 2096256
Analysis:
dfs_nol_timer_cleanup() calls dfs_nol_update(), which internally
calls a legacy function to update the scan channel list and sends
a WMI command to FW. However, from WIN side dfs_nol_timer_cleanup()
is also called after target stop, which leads to a kernel panic.
Solution:
Call dfs_nol_update() prior to target stop.
Initalize precac channel list during dfs reset.
Change-Id: If856d436ad215efa46cfc166d95bf3ccb4e7bf99
CRs-Fixed: 2096256
