Host need to print BTM resp TLV info (wmi_roam_btm_response_info)
only when trigger reason is BTM or WTC_BTM. As for other roam
triggers this TLV contains zeros, so host should not print.
Change-Id: Ic76a1b88b9e641745420c372b275392e86d4ba35
CRs-Fixed: 2884639
Pre CAC feature requires parallel operation in 2.4GHz and 5GHz.
So this feature won't be supported when there is no DBS support.
Reject pre CAC request in this scanario.
Change-Id: Iece04ac0f73aed2dfa1dd9bfd4869d96004534ce
CRs-Fixed: 2870645
Add vendor command interface/feature through which the user
or vendor can set the dtim count as per their requirement.
Change-Id: I26010948c4ed7e3c49bfe0453119235d4f438c6f
CRs-Fixed: 2894349
When updating the country to be the same value, the function will return
failure. This causes a crash in the wifi start up. Add check to see if
the country code is the same to avoid calling the API.
Change-Id: I7be11857fd9cc87b65f6c598d842a9ed5c024f59
CRs-fixed: 2896855
When processing the TPE IE from, the function has to calculate the
frequencies for each tx power it receives. The calculation is incorrect
which results in a bad lookup when populating the EIRP power value.
This can cause low throughtput issues.
Change-Id: Id854f678bd3933ab1a7198b346ed14d76d964360
CRs-fixed: 2896985
If DFS master capability disabled, STA+SAP SCC on DFS is not allowed,
so reset g_sta_sap_scc_on_dfs_chan to 0.
Change-Id: I90b0ec6947f5bc24c9854062f443de0d1f6dc452
CRs-Fixed: 2897719
Host checks if firmware advertises Operating channel validation(OCV)
support bit in service ready then updates OCV flag in wiphy ext feature.
Change-Id: I92f872a07e6f7142e602e6a9e5f5edcecc0aab0b
CRs-Fixed: 2880821
Currently, the code is not sending the Tx beamforming capability to FW
in the case of NAN. Add this call to support beamforming in NAN mode.
Change-Id: I32af660724cfaecfe59da153fea9f98d24b0d4cb
CRs-fixed: 2889614
Currently multiple ini is available for setting the broadcast
TWT requestor and responder configuration.
Deprecate "bcast_twt" legacy ini and also don't consider
legacy service capability WMI_SERVICE_BROADCAST_TWT.
So below is the service capability values combination
advertised by firmware:
new fw:
bcast_req bcast_resp legacy
0 0 0 -> disable bcast
0 1 0
1 0 0
1 1 1
old fw:
0 0 1 -> enable TWT
Also change the default value of "twt_bcast_req_resp_config" ini
to 1.
Change-Id: Ic9af296b0efffc8f76f647b5830183867e0adf57
CRs-Fixed: 2873360
Incase peer sends multiple Association
Request or multiple Association Request,
there can be crash due to excessive
logging.
So, rate limit the logging.
Also, this is also valid in case peer
sends multiple Disassociation or
Deauthentication request.
Change-Id: Iec4f70e8154ca0001f6d752f65449bb1d7bce5da
CRs-Fixed: 2891926
Currently, host sends mantissa in us for
QCA_WLAN_VENDOR_ATTR_TWT_SETUP_WAKE_INTVL_MANTISSA attribute.
Add changes to send wake interval mantissa in TU to firmware
and expectation from usersapce is to set the 1024 in the
exponent to derive the correct wake interval.
Change-Id: I53520369492961207496970fe78189bec6f75ad7
CRs-Fixed: 2897500
Currently pld_ipci_smmu_unmap suppot has been added for IPCI,
PCIE_FW_SIM and SNOC_FW_SIM type cases as an error, moving this
unmap support only for type IPCI.
Change-Id: Ib9a60656920d1cc46e28dc269983b7da8dba7d42
CRs-Fixed: 2896804
When "wmi_service_configure_roam_trigger_param_support" service
bit is set populate roam score delta and min rssi parameters
and send via WMI_ROAM_ENABLE_DISABLE_TRIGGER_REASON_CMDID.
Change-Id: I3c7fc56a95c28c43992763be3351d91d9fd44041
CRs-Fixed: 2890148
Set HE capable for tdls capability. Add logging
for printing he caps for TDLS setup request,
TDLS setup response frame and tdls discovery
response.
Change-Id: I57968b6b5dfbe66271ae2ea2c1f1074d0a14b2f8
CRs-Fixed: 2888950
In off channel P2P GO neg resp tx frame, supplicant sends
roc duration (suppose 100ms) to sends the frame and as
this is not sufficient to receive the GO confimation frame,
driver internally adds 500ms more duration. So, new roc
duration is 600ms (100+500). But currently, restart
of the roc timer happens with old roc duration instead
of newly calculated roc.
Send the extended roc timer duration in restart roc timer
to fix this.
Change-Id: I1238d69d1d8b03578d74ef6ad0895f11cfac0178
CRs-Fixed: 2890951
Any update to the SRNG TP/HP when the device is in low power
state would result in system errors. While in D3 WoW mode,
disable EXT grp irqs and drain TXRX before sending enter
power save mode to the FW. This will ensure that no interrupts
are received while in WoW mode and as a result there wont be any
HP/TP updates.
Change-Id: Ic1fb7fdd45096b458abf5d243fa652c3da878dc0
CRs-Fixed: 2890568
While parsing the nudge command, the peer mac address is not copied to
the params structure passed to sme. So while Nudge active command,
since peer mac address is NULL, the driver is not able to get the
peer object and set the Nudge active command fails.
Copy the peer mac address to set the active command to peer
object, so that when nudge command response is received, the
response is not dropped due to active command is not nudge.
Change-Id: I11b11b3187dff5a79d0f79106c21d60d04edc17b
CRs-Fixed: 2888903
CNE queries stats via the ext stats vendor cmd. As
part of this, REO commands are enqueued to HW for
each tid to get mpdu_rx and mpdu_rx_missed counts.
In the scenario where the first ext stats request
post STA disconnection and re-connection times out,
the counts from the previous connection are reused.
The second ext stats request can successfully get
the new counts from HW in which case, there is a
possiblity for the mpdu_rx count sent in the second
stats response to be lower than the count sent in
the first stats response.
Fix is to reset the mpdu_rx and mpdu_rx_missed count
on STA connection.
Change-Id: I381f9b6b27d8d023b1932b7d8587df240c1ff4d0
CRs-Fixed: 2896791
Allow twt get_params command with dialog_id 255 to get all session
parameters in user space.
Change-Id: I1b5dbc742c65f2445681aebf1f69255eaf6e1954
CRs-Fixed: 2882925
Currently the first EAPOL pkt has been received before setup
IPA interface context for STA and getting dropped, so adding
changes to send the EAPOL pkt to network even if IPA iface
for STA is not ready.
Change-Id: I78e8c7ba82dabc73503fb75c39ac794c152303dd
CRs-Fixed: 2874358
Possible wmi cmd is queued in suspend, if no more
htc_try_send comes from credit response or new wmi
cmd, wmi cmd will pending.
Fix is always kick htc queue if suspend failure.
Change-Id: I05e0cd6983e1d27de5bf109c3ddf05e4bdc12fd8
CRs-Fixed: 2895808
scenario:
(1) KASAN is enabled and DP thread is slow to process and deliver
Rx packets to stack.
(2) vdev-2 do disconnection and flush Rx packets that belong to
vdev-2, but DP thread is busy with processing vdev-0 Rx pakcets
then no chance to do GRO flush for vdev-2, Rx flush timeout and
vdev-2 net_dev get freed, later when DP thread do GRO flush for
vdev-2 pakcets, invalid accessing to vdev-2 net_dev happened.
solution:
(1) increase Rx packets flush timeout from 1000 ms to 2000 ms.
(2) do extra GRO flush if timeout happened.
Change-Id: Iddc445d950eeb6cd2bd0b125bf87051e850abeb2
CRs-Fixed: 2894978
The calculation to find the number of fields from the maximum transmit
power count is incorrect. Fix the calculation so the correct number of
values are sent to FW.
Change-Id: I274cc12df49f9eb619ef50aaef0ce1bd85e8d667
CRs-fixed: 2894809
When processing unexpected MLM join request in STA mode,
it won't create bss peer or trigger vdev start, just post
LIM_MLM_JOIN_CNF with result code eSIR_SME_RESOURCES_UNAVAILABLE;
when handling this connection failure, vdev stop will be sent but
WLAN_VDEV_SM_EV_STOP_RESP will be discarded due to SM is
in INIT state, which leads to PE session leak and unexpected
behaviors.
To fix it, change the result code to eSIR_SME_PEER_CREATE_FAILED,
then the pe_session will be deleted and no vdev stop will be
triggered when processing connection failure.
Change-Id: I7fd860e7ce07970eafcfb31cd9b54340048d69a4
CRs-Fixed: 2894292
