Move the logs to appropriate log levels to reduce
the log spam in wlan_hdd_cfg.c
Change-Id: I38c0f7920f1f7b478fae497c65df5daa8192c6d3
CRs-Fixed: 2014745
Move the logs to appropriate log levels to reduce
the log spam in wlan_hdd_assoc.c
Change-Id: I07d05203058448c1f7a6680da36b244667f6104e
CRs-Fixed: 2014745
Currently the config ini "wlanLoggingFEToConsole" specifically talks
about enabling the logs to kmsg for FATAL and ERROR logs.
This cfg.ini item should not be specific to any log level, instead
it should just depict whether logging to console should be enabled
or not. Hence change wlanLoggingFEToConsole to wlanLoggingToConsole.
Change-Id: I54e340ed58891175b53ac2d0137d15a2baea1c9f
CRs-Fixed: 2014745
Per OEM request an INI item is needed to enable/disable the Adaptive
Noise Immunity feature, so add support for gEnableANI.
Change-Id: Ie6867c0024a716bf65dca1eeab8dd2b58141eff7
CRs-Fixed: 2028697
Add an ioctl that allows a user to dump a specified number of records to
dmesg for WMI and Credit History.
Change-Id: I644dcf5edcb2f875af1e99e7b4677cde37081674
CRs-Fixed: 2028760
Currently, during del_virtual_iface if adapter is of type SAP
and cac is active, then host schedules a work which stop and
close adapter and in same context it again stop /close_Adapter.
As a part of this fix, avoid stop / close adapter if cac is
in progress.
Change-Id: I68a53b3b67f4a0222a35c15a3d4a9574dd3a9e90
CRs-Fixed: 2027509
Rx buffer hash table memory is not freed in htt_rx_attach
when target index allocation fails.
Fix is to free memory in failure case.
CRs-Fixed: 2025050
Change-Id: Ibbe238dc7d2f6dc2c31fe94569c9aa744714e930
IEEE80211_NUM_BAND is not defined in newer kernels, Add changes
to replace IEEE80211_NUM_BAND by NUM_NL80211_BANDS.
CRs-Fixed: 2028465
Change-Id: Id811a434aa791f096ef4921db0f2ab8b42bc9f23
In FTM mode pdev is getting created twice due to
two service ready events from the firmware beacause
of module stop and start.
Add logic to reuse the psoc/pdev for module stop and start.
Change-Id: Ib5a92020c3c01ccfa699167eef8d7a633a27db13
CRs-Fixed: 2029041
QXDM log shows HDD IPA packet dump from all the packets through
Rx exception path. Change the packet dump only for DATAPATH module
in debug level.
Fix compilation error when IPA_OFFLOAD not defined.
Change-Id: I2761c78bbe3e59e7d956d0e3df628d22e9bbe610
CRs-Fixed: 1102003
If the TDLS links exists and SAP comes up, there is a chance
that the peer is created for SAP before deleting TDLS peers,
thus leading to crash.
The fix is to teardown the TDLS links before starting hostapd
or starting the association process to avoid TDLS in concurrency
case.
Change-Id: I06c0d4f8965d3a1e614e8bd89f2d6af0a504fa9e
CRs-Fixed: 2027831
There is a comparison between constant and boolean inside
update cds config api which will always fail.
To address this issue change the type of variable from boolean to
uint8_t.
Change-Id: I7ba4d9fedd148d713af334b394757da2a496f5a5
CRs-Fixed: 2027402
The dump_tx_desc function is called to report the number of freed and used
tx descriptors when a suspend is rejected by data path. The debug code
was directly referencing a data field whereas the code to check the freed
and used descriptors used a function that reports a different number under
certain compilation flags. Use the function in the debug statement such that
the value checked is the value printed.
Change-Id: Iad3f519dc88319c7a421f77376dd43e15e6eaf09
CRs-Fixed: 1113880
Several constants in rrm_global.h use logical || where a bitwise | was
probably intended. clang warns about this.
Hence, use bitwise operator instead of logical operator.
Change-Id: I5a0543096e7f213f3d60f3eda03eb7765595a364
CRs-Fixed: 2028989
In Napier emulation, due to the FPGA slowness and the need from
firmware side to live debug issues during driver load, increase
driver probe timeout accordingly.
Change-Id: I7e435082cebabe9ec6d15dc5c11a73b7db84f19b
CRs-fixed: 2028294
In FTM mode con mode change handler does module stop
after holding SSR protect and module stop bails
out assuming its idle mode module stop. Make sure to
do module stop properly for FTM mode even if SSR
protect lock is taken by con mode change handler.
Change-Id: I5d2d7006bb9f4897a5dd22893cdf6a7a864de97b
CRs-Fixed: 2027020
During driver recovery, following a crash in firmware, there is a
chance to get stuck waiting for the MC thread to exit after it has
already done so. This is due to an external thread being active in the
driver when it should not be possible. Improve logging in such cases
to find out which thread is running, and skip waiting for MC thread
shutdown if it is already stopped to prevent getting hung.
Change-Id: I53ddc3afb8561ecd2d6b708b6488c503068c49a6
CRs-Fixed: 2027020
When flow pool is created, pool status is set to FLOW_POOL_ACTIVE_UNPAUSED
irrespective of whether netif queues are paused or not.
Also, when descriptors are transferred from invalid pool to deficient pool,
pool status is not checked. So, if deficient pool is paused, then even
after receiving required descriptors from invalid pool, its status and
netif queues will still remain paused due to which traffic will not be able
to resume ever.
Sync pool status with netif queue status by:
1) Unpausing netif queues as well when pool is created.
2) If deficient pool is paused and on receiving descriptors from invalid
pool, no. of descriptors goes beyond start threshold, unpause the
queues and set the pool status to FLOW_POOL_ACTIVE_UNPAUSED.
Change-Id: I69390e40130892d218372e4a8a0ab4b0c7b94b7e
CRs-Fixed: 2025759
In case of dfs offload, do not run cac timer, as cac will also be
offloaded in that case. Decide the same based of service bit info.
Change-Id: If4dd62628270ff0ba8632a9cd644a9d7ed6f31a4
CRs-Fixed: 2021357
Add support to fill cac duration and dfs region in vdev
start command, these values are used in firmware on phyerror
processing and cac timer offload cases.
Change-Id: I8bfbd4a3f59002f92ee2e5e321c15da849fce9ec
CRs-Fixed: 2021357
There is race condition between the bus bandwidth work and cleaning up
an adapter. Under some conditions, it is possible for the bus bandwidth
work to access a paritally destroyed adapter, leading to a
use-after-free. To prevent the race condition, use the following
sequence:
1) Stop the bandwidth timer
2) Flush pending bandwidth work
3) Cleanup the adapter
4) Restart the bandwidth timer, if needed
Change-Id: I7166e75e65433d2dcb818ff8b41fe959c510a2e9
CRs-Fixed: 2025184
While implementing the fix for "qcacld-3.0: Fix wlan_hdd_driver_ops
kernel-doc" it was observed that the kernel-doc for functions
wlan_hdd_bus_suspend() and wlan_hdd_bus_resume() did not match the
function signatures. Update the kernel-doc to match the actual code,
and in the case of wlan_hdd_bus_suspend() update one call in
hdd_enable_ext_wow() to align with the real interface instead of the
previously documented interface.
Change-Id: I6f25c954f5328a029fadeceadc23cfc242de6bf7
CRs-Fixed: 2025169
Currently not all of the wlan_hdd_driver_ops public APIs have their
documentation in the interface (header) file. Update the files so that
the public interface, not the implementation, is documented.
Change-Id: I68a809c9bc2a844232a0f5d07086f924f8ce1ace
CRs-Fixed: 2024274
