QUP common registers should not be accessed from SVM as that
memory is assigned to PVM. So, bypass the reading of hw version
registers and rely on PVM for the specific HW initialization done
based on different hw versions.
Change-Id: I1f18c80aaf143daf4da1402aa617d3b8f52f9b95
Signed-off-by: Vipin Deep Kaur <vkaur@codeaurora.org>
This change adds the ability to partially initialize
the MMC card by using card Sleep/Awake sequence (CMD5).
Card will be sent to Sleep state during runtime/system suspend
and will be woken up during runtime/system resume.
By using this sequence the card doesn't need full initialization
which gives time reduction in system/runtime resume path.
Change-Id: I0ece06feb8a5c0f4837126f44934d665c55294a2
Signed-off-by: Maya Erez <merez@codeaurora.org>
Signed-off-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org>
Signed-off-by: Shaik Sajida Bhanu <sbhanu@codeaurora.org>
Add the PMIC clocks required to be requested from clients via RPMH clock
driver.
Change-Id: I75b02fd3283ea0c459c6e28f06cfb45f04ece214
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Currently driver is giving back requests to gadget even if
the active transfers are not stopped. This might lead the
controller to access the requests which are already unmapped.
This change adds a judgement for giving back the requests to
gadget based on ep command status. Also if ep command times out
and the controller doesn't stop correctly then mark it as an
error event and restart the USB session.
Change-Id: If32cddddf0544140d5bdf68df9144702e00dc758
Signed-off-by: Udipto Goswami <ugoswami@codeaurora.org>
With GPIO, UART and others, allow specifying the device index via the
aliases node in the device tree.
On embedded devices, there is often a combination of removable (e.g.
SD card) and non-removable MMC devices (e.g. eMMC).
Therefore the index might change depending on
* host of removable device
* removable card present or not
This makes it difficult to hardcode the root device, if it is on the
non-removable device. E.g. if SD card is present eMMC will be mmcblk1,
if SD card is not present at boot, eMMC will be mmcblk0.
Alternative solutions like PARTUUIDs do not cover the case where multiple
mmcblk devices contain the same image. This is a common issue on devices
that can boot both from eMMC (for regular boot) and SD cards (as a
temporary boot medium for development). When a firmware image is
installed to eMMC after a test boot via SD card, there will be no
reliable way to refer to a specific device using (PART)UUIDs oder
LABELs.
The demand for this feature has led to multiple attempts to implement
it, dating back at least to 2012 (see
https://www.spinics.net/lists/linux-mmc/msg26586.html for a previous
discussion from 2014).
All indices defined in the aliases node will be reserved for use by the
respective MMC device, moving the indices of devices that don't have an
alias up into the non-reserved range. If the aliases node is not found,
the driver will act as before.
This is a rebased and cleaned up version of
https://www.spinics.net/lists/linux-mmc/msg26588.html .
Git-repo: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/
Git-commit: fa2d0aa96941e8dc347e49a04c75468e3002ee20_
Change-Id: I88c11705c8b66022e67b38a64bbc91625357a4bc
Based-on-patch-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lkml.org/lkml/2020/8/5/194
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Signed-off-by: Ram Prakash Gupta <rampraka@codeaurora.org>
The PON_HLOS module does not have the PON_DEBOUNCE_CTL register
to read the debounce delay configured for KPDPWR debounce.
This register is present in PON_PBS peripheral. Due to this the
software debounce control logic does not work as expected. To fix
this add support to read the PON_PBS peripheral from PON_HLOS
module by adding PON_PBS register as a second SPMI register base
in device tree node.
Change-Id: I15737a3dc6e8c99cd21531685c41ec1b2752b2ef
Signed-off-by: Kiran Gunda <kgunda@codeaurora.org>
QDSS components depend on "CONFIG_CORESIGHT", so enable it.
Enable "STM_PROTO_BASIC“ to support to write log to /dev/coresight-stm.
Change-Id: Ib8770c9a5c72abe718c814766a0e2d9f4e091524
Signed-off-by: Yuanfang Zhang <zhangyuanfang@codeaurora.org>
The multi-page bvec is resulting in the performance regression on
UFS devices in sequential read test for upto ~9%. Hence, disable
it as a workaround.
Change-Id: I1dc3f5e710fd1c9a76f32e3144a0081df755ea26
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Some remote edge initial rx channel state is set to CLOSING, in this
scenario, allow creation of smd device for this edge.
Change-Id: I5937b8f2451630c9ecbe8627ab8817a4ce00e673
Signed-off-by: Suresh Kumar Allam <allamsuresh@codeaurora.org>
Signed-off-by: Deepak Kumar Singh <deesin@codeaurora.org>
The macros used for the page numbers do not accurately reflect the
offsets into the implementation defined register space, so update
them accordingly, and use page 7, or implementation defined page 5
for the ARM_SMMU_STATS_SYNC_INV_TBU_ACK register.
Change-Id: I14d2ce69d971f5ff93c2b2ca1f28ec5882169106
Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org>
Update the android/abi_gki_aarch64_qcom with recent symbol additions.
Simple change and no need to update the .xml file, as no new symbol
addition.
Bug: 174275677
Signed-off-by: Archana Sriram <apsrir@codeaurora.org>
Signed-off-by: Kamal Agrawal <kamaagra@codeaurora.org>
Change-Id: Ic96fc5d11ab8d21fadbf85658e374e06dde14d0f
Increment NR_ISOLATED_ANON when isolate a page so that the same is
decremented when the page migration is successful or when adding pages
back to the lru.
Change-Id: I6879c0029342560496b79d649a77283c767ab08e
Fixes: aa3fa08df4 ("mem-offline: improve the effective utilization of movable zone")
Signed-off-by: Charan Teja Reddy <charante@codeaurora.org>
On some customer display panels, touch ghosting can happen due to
a voltage ripple from amoled. Add support to fix this issue, following
HW recommendation, by disabling smart pulse skipping in module
probe and disabling forced PSM when AMOLED is enabled.
Change-Id: Id5886d4cdaf2aa58bc53a874041bfae90374fafb
Signed-off-by: Jishnu Prakash <jprakash@codeaurora.org>
Compile wlan service file as part of GPL module.
Change-Id: If200d60c3b6c79041def9214329d0b2d2366038b
Signed-off-by: Sandeep Singh <sandsing@codeaurora.org>
Initialize the irq count work and also using irqf
no suspend flag during bark irq registration.
Change-Id: Ice72c4e5aff2bcdbba5d53eb1c839a2f86a2fd02
Signed-off-by: Gaurav Kohli <gkohli@codeaurora.org>
This patch adds GKI symbol list for Exynosauto SoC. We need to add
below 2 functions to GKI allowed symbol list.
snd_pcm_release_substream
- It's necessary from suspend/resume callback to clean current pcm stream.
unmap_kernel_range
- To unmap which are allocated by map_vm_area
Leaf changes summary: 2 artifacts changed
Changed leaf types summary: 0 leaf type changed
Removed/Changed/Added functions summary: 0 Removed, 0 Changed, 2 Added functions
Removed/Changed/Added variables summary: 0 Removed, 0 Changed, 0 Added variable
2 Added functions:
[A] 'function void snd_pcm_release_substream(snd_pcm_substream*)'
[A] 'function void unmap_kernel_range(unsigned long int, unsigned long int)'
Bug: 174288561
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Change-Id: I71058d55bbe10f2ec075e4c2c40291e5357b13a7
This patch adds to update GKI symbol list for Exynosauto SoC since
adding some drivers as GKI vendor modules.. To review the allowed list
easily, this patch does not include any newly additions of GKI symbols.
Bug: 174288561
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Change-Id: Iac4910d0c43a07e24e5e4069e3d2f1b3378fce2b
This change is for general scheduler improvement.
Change-Id: I8f521dfd31ff1c8cc1f16805e4e0ac78228d9383
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
