Currently the conversion APIs used doesn't take into account
the overloading of channel numbers between 6GHz, 5GHz and 2.4GHz
bands.
Add support to obtain the correct channel number (and auxiliary
information like band and frequency) through the new APIs that
support all three bands.
Change-Id: Ic2c8dfa4cc845d701dfd07df61c9ae1ee3d8bdef
CRs-Fixed: 2610378
Currently the conversion APIs used doesn't take into account
the overloading of channel numbers between 6GHz, 5GHz and 2.4GHz
bands.
Add support to obtain the correct channel number (and auxiliary
information like band and frequency) through the new APIs that
support all three bands.
Change-Id: Ief417f14620bc2fc02d76fea3642b6fbb9615916
CRs-Fixed: 2610378
Currently mesh mode uses channel numbering which is derived
from APIs that don't support 6GHz channels numbering due to the
overloading of 6GHz channels with 2.4GHz and 5GHz.
Add support to obtain the correct channel number (and auxiliary
information like band and frequency) through the new APIs that
support 6GHz.
Change-Id: Ib0b39ebae2a22bd6b2b5d17b9058c3c2100e0d59
CRs-Fixed: 2605229
Packets delivered to FISA via exception err path doesnot have TLVs.
FISA handling requires additional TLVs. dp rx core handling
skips TLVs, save TLV length info in nbuf->cb so that TLVs
are recovered back in FISA.
Change-Id: I53fab2e19abcbf82697ea6f53a4ddf3ea0dd0699
CRs-Fixed: 2620844
Sometimes the register write in windowed region
are not going through, thereby retaining the
previous value, which can be incorrect for a
certain mode of operation for the driver.
This kind of incorrect register values, due to
a register write not succeeding, can lead to
unwanted issues. Also the simple logging of
any such occcurence can be over-written in the
logs, thereby going unnoticed.
Add a HAL level statistics to maintain the
count of such failed register writes.
Change-Id: Ib5e98705c23f0c916cb85f518576663710eb30e0
CRs-Fixed: 2611839
Add support for the following NAN messages in kmsg:-
1. NAN enable status
2. NAN, NDP match events
3. NDP channel info.
etc.
Change-Id: I7f67b67153904b7efe8a708e3f93d069e399395c
CRs-Fixed: 2618433
Currently if peer reference is reused valid flag is not set.
In peer delete function if valid flag is not set, function
returns with out decrementing the ref count and also not
releasing the local id. This leads to local id exhaustion if
back to back peer reuse happens which is common in case of back
to back roaming to same AP. As a result connection to AP fails
due to unavailability of local id. In this change set valid flag
if peer reference is reused.
Change-Id: Ibeccbc4d33aac9e4285b48a4b8abdd2276fd7ede
CRs-Fixed: 2624798
For Disassoc frame, fw send ppdu stats to host with peer_id
of the previous associated client. peer id is valid and peer
structure is NULL making framectrl as zero for disassoc frame.
with the fix frame ctrl are populated before checking for invalid peer.
Change-Id: I5960685a4c90f00a850f4f1fa2b3d883117fb443
There might be a race condition between htc_kick_queues which is sheduled
by RPM resume and hdd_wlan_stop_modules.
Here are detail info:
1. Run time resume is called, which will schedule a work to do the
htc_kick_queues later.
2. hdd_wlan_stop_modules is called at the same time, which will call
htc_destroy to free the HTC_TARGET.
3. the htc_kick_queues will access the HTC_TARGET, but it has been
freed.
Change-Id: I7211a8eef2a2f1924fe91eafec5a4496eea5a507
CRs-Fixed: 2622317
WMI_WLAN_PROFILE commands support for tlv path.
Add WMI profile enable and trigger commands in tlv path
Change-Id: I10f867b181b559b82c097d6a61236f2145549238
Check the max value for max desc extracted from cfg
before using it for actual allocation of tx descs.
Change-Id: I9bd6c88f136870a42596afbf25328965fce959be
CRs-fixed: 2614329
In the current implementaion, if multivdev restart req is not sent
due to error cases, then the multivdev restart timer gets restarted
after every timeout and the vdev sm is stuck in same state.
Add multivdev restart timeout wait counter and assert after the wait
timeout expires.
Change-Id: I12b10fb7d880e7fcf3dd02d1e38397aa2e3aebe7
CRs-Fixed: 2621231
Query the external radar source and if external radars are
available use the external radars in addition to the internal
radars.
Change-Id: I9fe42ecaaf949f8e504c35ecb8cffb3e9e809fd0
CRs-Fixed: 2615278
Break up the 2MB descriptor bank memory allocations for WBM
idle link ring. Use multiple page allocation and populate the
WBM idle link descriptor ring with physical addresses of each
DMA page allocated in the descriptor bank.
This is to ensure that no requests for contiguous memory
allocations are made that might result in allocation failures.
For MCL set the page size to 4KB and leave it to max_alloc_size
cfg ini param for WIN specific code.
Change-Id: Iec30321044827c0174366cc02df25a42d38309e0
CRs-Fixed: 2565817
Add change to reduce log level for the serialization deinit
debug string as part of bootlog cleanup.
Change-Id: Ibf1cf8352df053df0dba6239f503b868a870a04d
CRs-Fixed: 2623638
Currently, wlan driver prints id in hex mode and
fw prints in decimal mode. Unnecessary hex to dec conversion
conversion is required while comparing with fw logs.
Fix is to change driver timestamp log from hex to decimal.
Change-Id: I78f9b7fe0ba590c53ea3e90b982691d91b7453e4
CRs-Fixed: 2620935
This acts as a vendor event and is used to update the information
of a station from the driver to userspace.
Add an attribute for the driver to update the channels scanned in
the last connect/roam attempt.
Change-Id: I3e87292d6ef00c0242cb583183de2b441352c8a5
CRs-Fixed: 2622092
Request is cleared before response for race condition between request
thread wificond and response work thread.
1. wificond thread sent get peer request and waited for
response.
2. worker thread got response from F/W, completed the request.
3. Wificond got the response, finished the request.
4. wificond triggered another get peer request, created
new request, set pending request bit TYPE_PEER_STATS.
5. Kworker thread clear the pending request bit
TYPE_PEER_STATS.
6. Cleared request TYPE_PEER_STATS couldn't be completed any
more, wificond thread waited for 1.6s, timeout happened.
Fix: Clear pending request bit TYPE_PEER_STATS before
complete the request, make sure old pending request bit is
cleared before new request of same type is set.
Change-Id: I058cada5fa870d95172122364903bff2b31eb277
CRs-Fixed: 2621914
Given country from country IE and operating class, check
whether a channel frequency belongs to that pair.
Change-Id: I9bf711b2c52ad230a3066113a5aa7b8959219754
CRs-Fixed: 2620767
wifi load failed due to unknown symbol in qca_ol
Add export symbol inside compile time macro
Change-Id: If1bb24084a6f95678b51bb85aaa0b8a87df3d50b
CRs-Fixed: 2621904
In case of nbuf map failure as part of htc_send_pkt for
tx credit flow disabled endpoints, htc pkt is not put
back in the freelist as return status is not checked
resulting in memory leak.
Fix is to put the htc pkt back in the freelist based on
status returned by htc_send_pkt.
Change-Id: I9173fa3684bc887a360b92d48b689c53a5ad5dbe
CRs-Fixed: 2596297
Use static window for accessing UMAC and CE register in qca6750. For
UMAC and CE register access, separate static window is mapped. Host
accesses these registers using relative offset to window address.
Change-Id: I7940336579553f05a11f1379f635689d08508c56
CRs-Fixed: 2617684
Currently, the IPA GSI can't update the index to copy
engine 5 write index register since such kind of
register address is above 512k, so as a workaround,
we use PCIE_PCIE_SCRATCH_2 to replace copy engine 5
write index register for IPA update the index. And then
WLAN firmware will poll this register to check if this
index update or not, if updtae, WLAN firmware will be
as agent to update the index to real copy engine 5 write
index register, and then the data from IPA to WLAN will
work. Before the real fix is ready, we use this method
for workaround.
Change-Id: I383a7d52f5685b633f1bd44659b11f30231c8ca8
Currently, wifi-pos uses channel number to get the fwr phymode.
For adding 6g support wifi-pos need to get the phymode from
frequency instead of channel number
As a part of fix, Add handler for getting phymode based on
frequency
CRs-Fixed: 2617903
Change-Id: I007edebe41bf5ca750a1262c85043f628dc9f89f
Command ring is now renamed to credit ring on QCN9000
and used for credit based flow.
Renaming the ring to give meaningful name.
Change-Id: I726aed19477fcfb256e4e0cca8ddb9389035b58c
CRs-Fixed: 2562640
Update CE registers offset during hal srng configuration
and configure CE IRQ for qcac6750.
Change-Id: I4fd3d37783361f0029c7ef80e32425f8790d1250
CRs-Fixed: 2617699
For restricted 80+80 MHz FR, target team initially added
wmi_service_bw_165mhz_support to indicate the target is capable of
supporting restricted 80+80 MHz.
Later, they have added wmi_service_bw_restricted_80p80_support to indicate
the same. Therefore rename wmi_service_bw_165mhz_support as
wmi_service_bw_restricted_80p80_support.
Change-Id: I12229b5d35911d4c34e63902c09592187d902bed
CRs-Fixed: 2621249
Peer key security type is set in cdp_set_pn_check,
this API is called in key install step, but only
update Ucast field even if in Mcast key install.
This may be set wrongly if Ucast and Mcast security
modes are different. Add a new API to set security
modes of differ key types separately.
Change-Id: Icaa63139d117de75633ca1f81eb618c6b9294b53
CRs-Fixed: 2617461
Genoa FW use the hardcode 128 for ce5 destination ring
entries, so change host code to follow up with it.
Change-Id: I1b7e70f8244efc3d3ca3dc659fb3d7687828b9c4
Currently there is no support to dynamically set dwell time
for 2g channels.
Add support in existing command SETDWELLTIME to dynamically
configure dwell time for 2g channels.
Along with set, add support to get dwell time for 2g channels
with the existing driver command GETDWELLTIME.
Change-Id: I8a71e39338e7a81690140f50bc3c5ac7b0bd63eb
CRs-Fixed: 2620370
Firmware advertises WMI_SERVICE_ROAM_SCAN_CHANNEL_LIST_TO_HOST_SUPPORT
at the time of initialization, that means host can querry for roam scan
channels list to firmware.
Host driver sends WMI_ROAM_GET_SCAN_CHANNEL_LIST_CMDID to firmware to
querry roam scan channels list and firmware responds with an event
WMI_ROAM_SCAN_CHANNEL_LIST_EVENTID.
Change-Id: I419a0206d7b06b6186d0c333c951bca5206f342f
CRs-Fixed: 2620607
For Genoa, it use IPA GSI, and whether gsi enabled
or not decided by ipa dts setting, which should get
from IPA driver, so add such information.
Change-Id: I6321afaf35c57d7d5865b896193ab1d44042ee4c
Request is cleared before response for race condition between request
thread wificond and response work thread.
1. wificond thread sent cp_stats_get request and waited for
response.
2. worker thread got response from F/W, completed the request.
3. Wificond got the response, finished the request.
4. wificond triggered another cp_stats_get request, created
new request, set pending request bit TYPE_STATION_STATS.
5. Kworker thread clear the pending request bit
TYPE_STATION_STATS.
6. Cleared request TYPE_STATION_STATS couldn't be completed any
more, wificond thread waited for 1.6s, timeout happened.
Fix: Clear pending request bit TYPE_STATION_STATS before
complete the request, make sure old pending request bit is
cleared before new request of same type is set.
Change-Id: I7b89571b1e95a6e17aec9d649bd3adfccf3eb02e
CRs-Fixed: 2619370
Increase the peer ref count before requesting for reo
queue stats and release the ref count after receiving
the queue stats on the reo status srng.
Change-Id: Ife3b87951e767414efa1bfb45486cd364578d2a7
CRs-Fixed: 2604862
Various QDF logs being printed to the driver log are not necessary for
debugging purposes.
Cleanup the logs that are not required.
Change-Id: I9c5685b4d31a741703667943ac458921fa0d480e
CRs-Fixed: 2616210
