Enable IPC logging for functionalities like diag, adb
and mtp that uses the f_fs driver on Holi.
Change-Id: I9f627f74d3b34b69da6da8d3390dc5f3eee95f14
Signed-off-by: Sriharsha Allenki <sallenki@codeaurora.org>
Currently GSI endpoint usb_request pointer is allocated only once
during boot time and it used by dwc3 driver for mapping doorbell register
address with USB endpoint request only once. During composition switch
or connect/disconnect scenarios same USB endpoint is being re-enabled and
does not create mapping again.
On some platforms multiple UDC cores can work in device mode. In case
of binding the UDC with primary controller first and then disconnect the
primary and bind UDC to secondary controller. Driver does not re-mapping
the doorbell address with current UDC core and USB GSI wrapper is trying
to access previously mapped GSI DBL address with previous core
resulting into smmu fault.
Fix this issue by adding re-mapping of doorbell using dwc->sysdev node
to map the doorbell register with correct UDC.
Change-Id: I327126148c2311884aee2aa99bb59b7add06e302
Signed-off-by: Chandana Kishori Chiluveru <cchiluve@codeaurora.org>
Signed-off-by: Mayank Rana <mrana@codeaurora.org>
This module is used to tunnel multicast
packets received on an interface to WLAN
clients which have registered for these
packet streams. Mainly used to tunnel
EMBMS packets received on TMGI streams.
Change-Id: I996077342261ec2cb688e98319c6881d2dd7cce2
Acked-by: Raju Velpula <rvelpula@qti.qualcomm.com>
Signed-off-by: Paras Singh Jain <parassin@codeaurora.org>
Enable SDHC FIFO explicitly by disabling the alternative FIFO.
The boot-loaders might use alternative FIFO instead of HC FIFO.
And the vendor specific register which has this setting won't get
reset with controller reset. So the FIFO setting done by the
bootloader would remain as it is unless its explicitly cleared.
Without clearing this setting, mmc driver can't make use of regular
FIFO mode.
Change-Id: Icd22f318d6f24e54afbcedacf026977b29de4e95
Signed-off-by: Sarthak Garg <sartgarg@codeaurora.org>
This is needed to get the current capabilities of vdd
regulator that is not managed by SDHCI driver.
Change-Id: I2a7f2981043185b51e268bf30c4ab9135991c6ee
Signed-off-by: Sarthak Garg <sartgarg@codeaurora.org>
System PM Violators reads should not be jumbled. Add a barrier to ensure
reads are sequential.
Change-Id: I68112e3ddff4c65a3b9e8cc1dc3a79ed392dc375
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
This change enables CONFIG_F2FS_CHECK_FS to check
FS consistency at runtime and catch errors.
Change-Id: I554d2e7d3155fba3cbcd2f2c0a14b6cc8b36abff
Signed-off-by: Sayali Lokhande <sayalil@codeaurora.org>
Expand match criteria so that multiple OF nodes with
the same BDF will match with the correct PCI device.
OF node will have an optional compatible entry with
device and vendor ID, which will be matched to a PCI
device and vendor ID.
Change-Id: I6e654d5dbf55a05b4e1b6a60d5d87addc2cb14b9
Signed-off-by: Tony Truong <truong@codeaurora.org>
Signed-off-by: Hemant Kumar <hemantk@codeaurora.org>
Enable printing of rate limited RPMH debug information to indicate
transient RPMH communication issues for Lahaina debug. This config item
will not be enabled in perf builds.
Change-Id: Ic154bf62099b0c5ec52b2c3c5caf7023b0f049e2
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
Let's us not worry about reporting RPM retries in perf builds. This
should help speed up the boot process.
Change-Id: Ia0d64e7da293bd8e77fd1484a714c8f21121e3fb
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
Initialize rc just for sanity so that it is not used uninitialized in
the return path.
Fixes: 568fc7ac9b ("leds: qti-flash: Handle all-enabled led mask separately")
Change-Id: I77caac87781b7a2ad2de0ecb13c5b3cd9ca3707b
Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org>
