qctecmdr
6595cb8fb1
Merge "ARM: dts: msm: add display support for monaco IDP"
2021-05-27 07:23:18 -07:00
qctecmdr
28f0df94a9
Merge "ARM: dts: msm: Update UFS phy regulator peak current for blair"
2021-05-27 07:23:18 -07:00
qctecmdr
6581636a48
Merge "ARM: dts: qcom: enable gpu mitigation for TSENS and BCL for monaco"
2021-05-27 07:23:18 -07:00
qctecmdr
e900983879
Merge "ARM: dts: msm: Fix regulator naming for pm8010"
2021-05-27 07:23:18 -07:00
qctecmdr
b761e40e7d
Merge "ARM: dts: msm: Enable modem pa sensor config only for YUPIK QRD"
2021-05-27 07:23:18 -07:00
qctecmdr
070a1fa905
Merge "ARM: dts: msm: Add MSM PCIe bus driver device nodes for direwolf"
2021-05-27 07:23:17 -07:00
qctecmdr
22dfbd8517
Merge "ARM: dts: msm: Remove unused static supplies for holi-pm6125"
2021-05-27 07:23:17 -07:00
Nitin Rawat
74815b9c7f
ARM: dts: msm: Update UFS phy regulator peak current for blair
...
This updates the UFS phy regulator peak current for blair .
Change-Id: I9ea54491ea6b724250c1886ab894105554c34f83
2021-05-27 17:07:24 +05:30
Venkata Prahlad Valluru
40e3c555b0
ARM: dts: msm: add display support for monaco IDP
...
Add display nodes and pinctrl details. Also update
platform details.
Change-Id: Ic4cb86758231c893d3c1a1cead2d1118103e143a
2021-05-27 15:56:56 +05:30
qctecmdr
34198a3fd1
Merge "ARM: dts: msm: Include display nodes for yupik idp with PM7250B"
2021-05-27 02:31:38 -07:00
qctecmdr
8cd5f3679c
Merge "ARM: dts: msm: Add smb1394 support for holi-pm6125"
2021-05-27 02:31:38 -07:00
qctecmdr
af80aaf739
Merge "dt-bindings: kgsl: Add compatible property in qcom,gpu-model"
2021-05-27 02:31:38 -07:00
qctecmdr
c3fcb98514
Merge "ARM: dts: msm: use dummy regulator for 3V eLDO supply of touch on Holi"
2021-05-27 02:31:37 -07:00
qctecmdr
876b62dcb6
Merge "ARM: dts: msm: Disable EP initiated BW scaling on switch for sdxlemur"
2021-05-27 02:31:37 -07:00
qctecmdr
09bc81a79d
Merge "ARM: dts: msm: Disable two_pass_use_wfi quirk for yupik GPU"
2021-05-27 02:31:37 -07:00
Manaf Meethalavalappu Pallikunhi
8982f65ddf
ARM: dts: qcom: enable gpu mitigation for TSENS and BCL for monaco
...
Enable gpu thermal zone mitigation for TSENS and BCL thermal
zones for monaco.
Change-Id: Iadb08edc362390c512a63ea6bc666eadcdfc02f8
2021-05-27 13:44:44 +05:30
qctecmdr
c08acd76ca
Merge "ARM: dts: msm: Add pin controls for camera GPIOs"
2021-05-26 23:35:33 -07:00
qctecmdr
f267f3271d
Merge "ARM: dts: msm: Disable modem region reserved on sa8155"
2021-05-26 23:35:33 -07:00
qctecmdr
2371debecb
Merge "ARM: dts: msm: add RPM managed regulator devices for QCS405"
2021-05-26 23:35:32 -07:00
qctecmdr
8ead807c7a
Merge "ARM: dts: msm: Remove qcom,gpu-qdss-stm property for Shima GPU"
2021-05-26 23:35:32 -07:00
qctecmdr
7b1a904884
Merge "ARM: dts: qcom: add ipc and codec cdev nodes"
2021-05-26 23:35:32 -07:00
qctecmdr
e894dd6af3
Merge "ARM: dts: msm: Add device tree support for PM7250B"
2021-05-26 23:35:32 -07:00
Faiz Nabi Kuchay
95a5d72cee
ARM: dts: msm: Remove unused static supplies for holi-pm6125
...
Remove unused static supplies for holi MTP, CDP,
MTP-USBC, platforms with PM6125 pmic.
Change-Id: Ia5aa80d102c5b4649553810d12dc0ddea9c77443
2021-05-26 22:53:07 -07:00
Shyam Kumar Thella
f388b08da3
ARM: dts: msm: Fix regulator naming for pm8010
...
On monaco RPM uses "ldom" as the reasource name for PM8010.
Update the same in PM8010's regulator configuration.
Change-Id: Ic0f70d5bf16017d99cbee62d0e05fd15b131cf17
2021-05-27 11:12:27 +05:30
Shyam Kumar Thella
625fd66996
ARM: dts: msm: Fix ldoa3 regulator for monaco
...
Enable ldoa3 regulator on monaco.
Add compatible string for regulator resources of ldoa3.
Change-Id: I13de85d117c2d8f49cec4a5823215d588ca6f7d1
2021-05-27 10:28:36 +05:30
Rajeev Nandan
bf88b90686
ARM: dts: msm: use dummy regulator for 3V eLDO supply of touch on Holi
...
The 3V eLDO controlled by gpio#53 is always ON, to avoid any conflict
with the ALS sensor that is also using the same GPIO.
Make use of a dummy regulator for the touch 3V supply.
Change-Id: Ie40ab4c27a9f10222ce4fbc77f51e65acefeff8b
2021-05-26 21:31:54 -07:00
qctecmdr
2e58ae202f
Merge "ARM: dts: qcom: Add thermal overlay devicetree support for holi-pm6125"
2021-05-26 20:35:30 -07:00
qctecmdr
2ff5208c4f
Merge "ARM: dts: msm: Add cnss dtsi to cpe"
2021-05-26 20:35:30 -07:00
qctecmdr
61d92f15c7
Merge "ARM: dts: qcom: Enable cx ipeak cooling device configuration for holi"
2021-05-26 08:49:07 -07:00
qctecmdr
e0d9ba9b6a
Merge "dt-bindings: Add dt bindings for silent boot mode"
2021-05-26 08:49:07 -07:00
qctecmdr
ae30506565
Merge "ARM: dts: qcom: enable pmic alarm sensor and BCL thermal zones for monaco"
2021-05-26 08:49:07 -07:00
qctecmdr
0cb44ac2a2
Merge "ARM: dts: msm: Add ion secure heap and secure buffer for quin-vm"
2021-05-26 08:49:06 -07:00
qctecmdr
ed9b9ec42e
Merge "ARM: dts: msm: change min voltage of touch_avdd fixed regulator"
2021-05-26 08:49:06 -07:00
qctecmdr
ad1ac51de4
Merge "ARM: dts: msm: Remove generic labels for regulators"
2021-05-26 08:49:06 -07:00
qctecmdr
96f940ca09
Merge "ARM: dts: msm: Update ADC support for PM6125"
2021-05-26 08:49:06 -07:00
Gopala Krishna Nuthaki
372f47f75f
ARM: dts: msm: Enable modem pa sensor config only for YUPIK QRD
...
Enable modem pa sensors config rules only for yupik QRD and
remove for other platforms as per recommendation.
Change-Id: Icfb54a900b17fd9f6bfc1c7eb59dfa34bbdeba2b
2021-05-26 20:58:43 +05:30
Manaf Meethalavalappu Pallikunhi
f7c1abfff8
ARM: dts: qcom: Add thermal overlay devicetree support for holi-pm6125
...
Add thermal overlay devicetree configurations like pmic alarm
sensor thermal zone mitigation and BCL thermal zone mitigation
for holi-pm6125.
Change-Id: I20fe0880938bde6a62a45a6f11b3b64ae8e847fb
2021-05-26 19:54:20 +05:30
Pankaj Gupta
7b4626af09
dt-bindings: kgsl: Add compatible property in qcom,gpu-model
...
We can define compatible property for qcom,gpu-model nodes.
Change-Id: Idd680b536a95d6124c06541253b0cb6b082d790e
2021-05-26 19:39:56 +05:30
Om Parkash
f0a396fdb7
ARM: dts: msm: Add pin controls for camera GPIOs
...
Add pin controls for camera and camera sensor GPIOs.
Change-Id: If5eeed86b16735a227159553a78bda867f775295
2021-05-26 19:22:32 +05:30
qctecmdr
e9b493350a
Merge "ARM: dts: msm: Change the shmbridge default size to 1M"
2021-05-26 05:18:27 -07:00
qctecmdr
47c53f9d57
Merge "ARM: dts: msm: Add WDT node for SA2150P"
2021-05-26 05:18:27 -07:00
qctecmdr
359f7657e4
Merge "ARM: dts: msm: Add thermal zones for pm5100 temp alarm"
2021-05-26 05:18:27 -07:00
qctecmdr
c7b930e9c2
Merge "ARM: dts: qcom: update sdhc properties"
2021-05-26 05:18:27 -07:00
qctecmdr
4295f14344
Merge "ARM: dts: msm: Add GPU support for monaco IoT"
2021-05-26 05:18:26 -07:00
qctecmdr
70ab289628
Merge "ARM: dts: qcom: add slate VA interface"
2021-05-26 05:18:26 -07:00
Veera Vegivada
84d1f84b90
ARM: dts: msm: add RPM managed regulator devices for QCS405
...
Also add RPM managed regulator devices for QCS405 so that
the client requests made for these regulators are aggregated
by the RPM processor along with the requests from other
processors.
Change-Id: Ie9d22bd3b2b080b691f21cecedd337aacf3d3702
2021-05-26 15:07:53 +05:30
Raghavendra Kakarla
23799839ef
ARM: dts: msm: Add rpm-smd node for qcs405
...
Add rpm-smd devic node for APSS communication with RPM.
Change-Id: I62497058ed67b97d94dc868250f305097260f64d
2021-05-26 02:34:51 -07:00
Ashish Chavan
2850dd4e1e
ARM: dts: msm: Add smb1394 support for holi-pm6125
...
Add support for smb1394 for holi-pm6125 mtp and mtp-usbc
platform, while at it remove smb1398 nodes for the same.
Change-Id: Ie0bce0b289739d1a206eeb6585dac8fca160f63a
2021-05-26 13:15:18 +05:30
Jishnu Prakash
4a05ff7b96
ARM: dts: msm: Update ADC support for PM6125
...
Correct interrupt name for PM6125 ADC_TM to match the name
expected in the driver. Remove VCOIN channel from VADC as it
is not used.
Change-Id: I1b96fae160b82bf3378b0c72960ecb6fb76c4043
2021-05-26 12:06:41 +05:30
sasevs
a79eeb5225
ARM: dts: qcom: add ipc and codec cdev nodes
...
Add audio-cc-ipc and cc-codec cdev nodes
in slate.dtsi.
Change-Id: I5d8a18108689ee899142002a5cd211648d72e46d
2021-05-26 11:21:02 +05:30
