commit 48381273f8734d28ef56a5bdf1966dd8530111bc upstream.
The routine huge_pmd_unshare() is passed a pointer to an address
associated with an area which may be unshared. If unshare is successful
this address is updated to 'optimize' callers iterating over huge page
addresses. For the optimization to work correctly, address should be
updated to the last huge page in the unmapped/unshared area. However, in
the common case where the passed address is PUD_SIZE aligned, the address
is incorrectly updated to the address of the preceding huge page. That
wastes CPU cycles as the unmapped/unshared range is scanned twice.
Link: https://lkml.kernel.org/r/20220524205003.126184-1-mike.kravetz@oracle.com
Fixes: 39dde65c99 ("shared page table for hugetlb page")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Muchun Song <songmuchun@bytedance.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 37462a920392cb86541650a6f4121155f11f1199 upstream.
With gcc version 12.0.1 20220401 (Red Hat 12.0.1-0), building with
defconfig results in the following compilation error:
| CC mm/swapfile.o
| mm/swapfile.c: In function `setup_swap_info':
| mm/swapfile.c:2291:47: error: array subscript -1 is below array bounds
| of `struct plist_node[]' [-Werror=array-bounds]
| 2291 | p->avail_lists[i].prio = 1;
| | ~~~~~~~~~~~~~~^~~
| In file included from mm/swapfile.c:16:
| ./include/linux/swap.h:292:27: note: while referencing `avail_lists'
| 292 | struct plist_node avail_lists[]; /*
| | ^~~~~~~~~~~
This is due to the compiler detecting that the mask in
node_states[__state] could theoretically be zero, which would lead to
first_node() returning -1 through find_first_bit.
I believe that the warning/error is legitimate. I first tried adding a
test to check that the node mask is not emtpy, since a similar test exists
in the case where MAX_NUMNODES == 1.
However, adding the if statement causes other warnings to appear in
for_each_cpu_node_but, because it introduces a dangling else ambiguity.
And unfortunately, GCC is not smart enough to detect that the added test
makes the case where (node) == -1 impossible, so it still complains with
the same message.
This is why I settled on replacing that with a harmless, but relatively
useless (node) >= 0 test. Based on the warning for the dangling else, I
also decided to fix the case where MAX_NUMNODES == 1 by moving the
condition inside the for loop. It will still only be tested once. This
ensures that the meaning of an else following for_each_node_mask or
derivatives would not silently have a different meaning depending on the
configuration.
Link: https://lkml.kernel.org/r/20220414150855.2407137-3-dinechin@redhat.com
Signed-off-by: Christophe de Dinechin <christophe@dinechin.org>
Signed-off-by: Christophe de Dinechin <dinechin@redhat.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Ben Segall <bsegall@google.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Zhen Lei <thunder.leizhen@huawei.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8b9ad480bd1dd25f4ff4854af5685fa334a2f57a upstream.
The bug is here:
if (!iommu || iommu->dev->of_node != spec->np) {
The list iterator value 'iommu' will *always* be set and non-NULL by
list_for_each_entry(), so it is incorrect to assume that the iterator
value will be NULL if the list is empty or no element is found (in fact,
it will point to a invalid structure object containing HEAD).
To fix the bug, use a new value 'iter' as the list iterator, while use
the old value 'iommu' as a dedicated variable to point to the found one,
and remove the unneeded check for 'iommu->dev->of_node != spec->np'
outside the loop.
Cc: stable@vger.kernel.org
Fixes: f78ebca8ff ("iommu/msm: Add support for generic master bindings")
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Link: https://lore.kernel.org/r/20220501132823.12714-1-xiam0nd.tong@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2a4a62a14be1947fa945c5c11ebf67326381a568 upstream.
syscall_stub_data() expects the data_count parameter to be the number of
longs, not bytes.
==================================================================
BUG: KASAN: stack-out-of-bounds in syscall_stub_data+0x70/0xe0
Read of size 128 at addr 000000006411f6f0 by task swapper/1
CPU: 0 PID: 1 Comm: swapper Not tainted 5.18.0+ #18
Call Trace:
show_stack.cold+0x166/0x2a7
__dump_stack+0x3a/0x43
dump_stack_lvl+0x1f/0x27
print_report.cold+0xdb/0xf81
kasan_report+0x119/0x1f0
kasan_check_range+0x3a3/0x440
memcpy+0x52/0x140
syscall_stub_data+0x70/0xe0
write_ldt_entry+0xac/0x190
init_new_ldt+0x515/0x960
init_new_context+0x2c4/0x4d0
mm_init.constprop.0+0x5ed/0x760
mm_alloc+0x118/0x170
0x60033f48
do_one_initcall+0x1d7/0x860
0x60003e7b
kernel_init+0x6e/0x3d4
new_thread_handler+0x1e7/0x2c0
The buggy address belongs to stack of task swapper/1
and is located at offset 64 in frame:
init_new_ldt+0x0/0x960
This frame has 2 objects:
[32, 40) 'addr'
[64, 80) 'desc'
==================================================================
Fixes: 858259cf7d ("uml: maintain own LDT entries")
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Cc: stable@vger.kernel.org
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 57ae0b67b747031bc41fb44643aa5344ab58607e upstream.
The previous fix here was only partially correct, it did
result in returning a proper error value in case of error,
but it also clobbered the pid that we need to return from
this function (not just zero for success).
As a result, it returned 0 here, but later this is treated
as a pid and used to kill the process, but since it's now
0 we kill(0, SIGKILL), which makes UML kill itself rather
than just the helper thread.
Fix that and make it more obvious by using a separate
variable for the pid.
Fixes: ccf1236ecac4 ("um: fix error return code in winch_tramp()")
Reported-and-tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b041b7b9de6e1d4362de855ab90f9d03ef323edd upstream.
In client mode, we can't connect to hidden SSID APs or SSIDs not advertised
in beacons on DFS channels, since we're forced to passive scan. Fix this by
sending out a probe request immediately after the first beacon, if active
scan was requested by the user.
Cc: stable@vger.kernel.org
Reported-by: Catrinel Catrinescu <cc@80211.de>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20220420104907.36275-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a255ee29252066d621df5d6b420bf534c6ba5bc0 upstream.
When irq-xtensa-mx chip is used in non-SMP configuration its
irq_set_affinity callback is not called leaving IRQ affinity set empty.
As a result IRQ delivery does not work in that configuration.
Initialize IRQ affinity of the xtensa MX interrupt distributor to CPU 0
for all external IRQ lines.
Cc: stable@vger.kernel.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a3d66a76348daf559873f19afc912a2a7c2ccdaf upstream.
Register ARMADA_370_XP_INT_FABRIC_MASK_OFFS is Armada 370 and XP specific
and on new Armada platforms it has different meaning. It does not configure
Performance Counter Overflow interrupt masking. So do not touch this
register on non-A370/XP platforms (A375, A38x and A39x).
Signed-off-by: Pali Rohár <pali@kernel.org>
Cc: stable@vger.kernel.org
Fixes: 28da06dfd9 ("irqchip: armada-370-xp: Enable the PMU interrupts")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220425113706.29310-1-pali@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f93e91a0372c922c20d5bee260b0f43b4b8a1bee upstream.
When multiplying of different types, an overflow is possible even when
storing the result in a larger type. This is because the conversion is
done after the multiplication. So arithmetic overflow and thus in
incorrect value is possible.
Correct an instance of this in the inter packet delay calculation. Fix by
ensuring one of the operands is u64 which will promote the other to u64 as
well ensuring no overflow.
Cc: stable@vger.kernel.org
Fixes: 7724105686 ("IB/hfi1: add driver files")
Link: https://lore.kernel.org/r/20220520183712.48973.29855.stgit@awfm-01.cornelisnetworks.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1aa0e8b144b6474c4914439d232d15bfe883636b upstream.
Add a config option to guard (future) usage of asm_volatile_goto() that
includes "tied outputs", i.e. "+" constraints that specify both an input
and output parameter. clang-13 has a bug[1] that causes compilation of
such inline asm to fail, and KVM wants to use a "+m" constraint to
implement a uaccess form of CMPXCHG[2]. E.g. the test code fails with
<stdin>:1:29: error: invalid operand in inline asm: '.long (${1:l}) - .'
int foo(int *x) { asm goto (".long (%l[bar]) - .\n": "+m"(*x) ::: bar); return *x; bar: return 0; }
^
<stdin>:1:29: error: unknown token in expression
<inline asm>:1:9: note: instantiated into assembly here
.long () - .
^
2 errors generated.
on clang-13, but passes on gcc (with appropriate asm goto support). The
bug is fixed in clang-14, but won't be backported to clang-13 as the
changes are too invasive/risky.
gcc also had a similar bug[3], fixed in gcc-11, where gcc failed to
account for its behavior of assigning two numbers to tied outputs (one
for input, one for output) when evaluating symbolic references.
[1] https://github.com/ClangBuiltLinux/linux/issues/1512
[2] https://lore.kernel.org/all/YfMruK8%2F1izZ2VHS@google.com
[3] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=98096
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220202004945.2540433-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit eb2fd187abc878a2dfad46902becb74963473c7d upstream.
Add H264 level 1.0, 4.1, 4.2 to the list of supported formats.
While the hardware does not fully support these levels, it does support
most of them. The constraints on frame size and pixel formats already
cover the limitation.
This fixes negotiation of level on GStreamer 1.17.1.
Cc: stable@vger.kernel.org
Fixes: 42a68012e6 ("media: coda: add read-only h.264 decoder profile/level controls")
Suggested-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7110c08ea71953a7fc342f0b76046f72442cf26c upstream.
The CODA960 manual states that ASO/FMO features of baseline are not
supported, so for this reason this driver should only report
constrained baseline support.
This fixes negotiation issue with constrained baseline content
on GStreamer 1.17.1.
ASO/FMO features are unsupported for the encoder and untested for the
decoder because there is currently no userspace support. Neither GStreamer
parsers nor FFMPEG parsers support ASO/FMO.
Cc: stable@vger.kernel.org
Fixes: 42a68012e6 ("media: coda: add read-only h.264 decoder profile/level controls")
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Pascal Speck <kernel@iktek.de>
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 64c54d9244a4efe9bc6e9c98e13c4bbb8bb39083 upstream.
The bug is here:
if (!rdev || rdev->desc_nr != nr) {
The list iterator value 'rdev' will *always* be set and non-NULL
by rdev_for_each_rcu(), so it is incorrect to assume that the
iterator value will be NULL if the list is empty or no element
found (In fact, it will be a bogus pointer to an invalid struct
object containing the HEAD). Otherwise it will bypass the check
and lead to invalid memory access passing the check.
To fix the bug, use a new variable 'iter' as the list iterator,
while using the original variable 'pdev' as a dedicated pointer to
point to the found element.
Cc: stable@vger.kernel.org
Fixes: 70bcecdb15 ("md-cluster: Improve md_reload_sb to be less error prone")
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fc8738343eefc4ea8afb6122826dea48eacde514 upstream.
The bug is here:
if (!rdev)
The list iterator value 'rdev' will *always* be set and non-NULL
by rdev_for_each(), so it is incorrect to assume that the iterator
value will be NULL if the list is empty or no element found.
Otherwise it will bypass the NULL check and lead to invalid memory
access passing the check.
To fix the bug, use a new variable 'iter' as the list iterator,
while using the original variable 'rdev' as a dedicated pointer to
point to the found element.
Cc: stable@vger.kernel.org
Fixes: 2aa82191ac ("md-cluster: Perform a lazy update")
Acked-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Acked-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8fb6c44fe8468f92ac7b8bbfcca4404a4e88645f upstream.
If the display is not enable()d, then we aren't holding a runtime PM
reference here. Thus, it's easy to accidentally cause a hang, if user
space is poking around at /dev/drm_dp_aux0 at the "wrong" time.
Let's get a runtime PM reference, and check that we "see" the panel.
Don't force any panel power-up, etc., because that can be intrusive, and
that's not what other drivers do (see
drivers/gpu/drm/bridge/ti-sn65dsi86.c and
drivers/gpu/drm/bridge/parade-ps8640.c.)
Fixes: 0d97ad03f4 ("drm/bridge: analogix_dp: Remove duplicated code")
Cc: <stable@vger.kernel.org>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220301181107.v4.1.I773a08785666ebb236917b0c8e6c05e3de471e75@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1c3b2a27def609473ed13b1cd668cb10deab49b4 upstream.
The bug is here:
if (nvkm_cstate_valid(clk, cstate, max_volt, clk->temp))
return cstate;
The list iterator value 'cstate' will *always* be set and non-NULL
by list_for_each_entry_from_reverse(), so it is incorrect to assume
that the iterator value will be unchanged if the list is empty or no
element is found (In fact, it will be a bogus pointer to an invalid
structure object containing the HEAD). Also it missed a NULL check
at callsite and may lead to invalid memory access after that.
To fix this bug, just return 'encoder' when found, otherwise return
NULL. And add the NULL check.
Cc: stable@vger.kernel.org
Fixes: 1f7f3d91ad ("drm/nouveau/clk: Respect voltage limits in nvkm_cstate_prog")
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220327075824.11806-1-xiam0nd.tong@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e168c25526cd0368af098095c2ded4a008007e1b upstream.
When the mapping is already reaped the unmap must be a no-op, as we
would otherwise try to remove the mapping twice, corrupting the involved
data structures.
Cc: stable@vger.kernel.org # 5.4
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Guido Günther <agx@sigxcpu.org>
Acked-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8eecddfca30e1651dc1c74531ed5eef21dcce7e3 upstream.
In ufs_qcom_dev_ref_clk_ctrl(), it was noted that the ref_clk needs to be
stable for at least 1us. Even though there is wmb() to make sure the write
gets "completed", there is no guarantee that the write actually reached the
UFS device. There is a good chance that the write could be stored in a
Write Buffer (WB). In that case, even though the CPU waits for 1us, the
ref_clk might not be stable for that period.
So lets do a readl() to make sure that the previous write has reached the
UFS device before udelay().
Also, the wmb() after writel_relaxed() is not really needed. Both writel()
and readl() are ordered on all architectures and the CPU won't speculate
instructions after readl() due to the in-built control dependency with read
value on weakly ordered architectures. So it can be safely removed.
Link: https://lore.kernel.org/r/20220504084212.11605-4-manivannan.sadhasivam@linaro.org
Fixes: f06fcc7155 ("scsi: ufs-qcom: add QUniPro hardware support and power optimizations")
Cc: stable@vger.kernel.org
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 036a45aa587a10fa2abbd50fbd0f6c4cfc44f69f upstream.
The bug is here:
p->target_id, p->target_lun);
The list iterator 'p' will point to a bogus position containing HEAD if the
list is empty or no element is found. This case must be checked before any
use of the iterator, otherwise it will lead to an invalid memory access.
To fix this bug, add a check. Use a new variable 'iter' as the list
iterator, and use the original variable 'p' as a dedicated pointer to point
to the found element.
Link: https://lore.kernel.org/r/20220414040231.2662-1-xiam0nd.tong@gmail.com
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1689c169134f4b5a39156122d799b7dca76d8ddb upstream.
We always call hold_lkb(lkb) if we increment lkb->lkb_wait_count.
So, we always need to call unhold_lkb(lkb) if we decrement
lkb->lkb_wait_count. This patch will add missing unhold_lkb(lkb) if we
decrement lkb->lkb_wait_count. In case of setting lkb->lkb_wait_count to
zero we need to countdown until reaching zero and call unhold_lkb(lkb).
The waiters list unhold_lkb(lkb) can be removed because it's done for
the last lkb_wait_count decrement iteration as it's done in
_remove_from_waiters().
This issue was discovered by a dlm gfs2 test case which use excessively
dlm_unlock(LKF_CANCEL) feature. Probably the lkb->lkb_wait_count value
never reached above 1 if this feature isn't used and so it was not
discovered before.
The testcase ended in a rsb on the rsb keep data structure with a
refcount of 1 but no lkb was associated with it, which is itself
an invalid behaviour. A side effect of that was a condition in which
the dlm was sending remove messages in a looping behaviour. With this
patch that has not been reproduced.
Cc: stable@vger.kernel.org
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bbe832b9db2e1ad21522f8f0bf02775fff8a0e0e upstream.
At present, pages not in the target zone are added to cc->migratepages
list in isolate_migratepages_block(). As a result, pages may migrate
between nodes unintentionally.
This would be a serious problem for older kernels without commit
a984226f457f849e ("mm: memcontrol: remove the pgdata parameter of
mem_cgroup_page_lruvec"), because it can corrupt the lru list by
handling pages in list without holding proper lru_lock.
Avoid returning a pfn outside the target zone in the case that it is
not aligned with a pageblock boundary. Otherwise
isolate_migratepages_block() will handle pages not in the target zone.
Link: https://lkml.kernel.org/r/20220511044300.4069-1-yamamoto.rei@jp.fujitsu.com
Fixes: 70b44595ea ("mm, compaction: use free lists to quickly locate a migration source")
Signed-off-by: Rei Yamamoto <yamamoto.rei@jp.fujitsu.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Don Dutile <ddutile@redhat.com>
Cc: Wonhyuk Yang <vvghjk1234@gmail.com>
Cc: Rei Yamamoto <yamamoto.rei@jp.fujitsu.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 87d83b96c8d6c6c2d2096bd0bdba73bcf42b8ef0 upstream.
Drop the leftover pm_runtime_disable() calls from the late probe error
paths that would, for example, prevent runtime PM from being reenabled
after a probe deferral.
Link: https://lore.kernel.org/r/20220401133854.10421-2-johan+linaro@kernel.org
Fixes: 6e5da6f7d8 ("PCI: qcom: Fix error handling in runtime PM support")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
Cc: stable@vger.kernel.org # 4.20
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 12068bb346db5776d0ec9bb4cd073f8427a1ac92 upstream.
92597f97a40b ("PCI/PM: Avoid putting Elo i2 PCIe Ports in D3cold") omitted
braces around the new Elo i2 entry, so it overwrote the existing Gigabyte
X299 entry. Add the appropriate braces.
Found by:
$ make W=1 drivers/pci/pci.o
CC drivers/pci/pci.o
drivers/pci/pci.c:2974:12: error: initialized field overwritten [-Werror=override-init]
2974 | .ident = "Elo i2",
| ^~~~~~~~
Link: https://lore.kernel.org/r/20220526221258.GA409855@bhelgaas
Fixes: 92597f97a40b ("PCI/PM: Avoid putting Elo i2 PCIe Ports in D3cold")
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v5.15+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 99696a2592bca641eb88cc9a80c90e591afebd0f upstream.
In create_var_ref(), init_var_ref() is called to initialize the fields
of variable ref_field, which is allocated in the previous function call
to create_hist_field(). Function init_var_ref() allocates the
corresponding fields such as ref_field->system, but frees these fields
when the function encounters an error. The caller later calls
destroy_hist_field() to conduct error handling, which frees the fields
and the variable itself. This results in double free of the fields which
are already freed in the previous function.
Fix this by storing NULL to the corresponding fields when they are freed
in init_var_ref().
Link: https://lkml.kernel.org/r/20220425063739.3859998-1-keitasuzuki.park@sslab.ics.keio.ac.jp
Fixes: 067fe038e7 ("tracing: Add variable reference handling to hist triggers")
CC: stable@vger.kernel.org
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Keita Suzuki <keitasuzuki.park@sslab.ics.keio.ac.jp>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3bd561e1572ee02a50cd1a5be339abf1a5b78d56 upstream.
struct acpi_device_properties describes one source of properties present
on either struct acpi_device or struct acpi_data_node. When properties are
parsed, both are populated but when released, only those properties that
are associated with the device node are freed.
Fix this by also releasing memory of the data node properties.
Fixes: 5f5e4890d5 ("ACPI / property: Allow multiple property compatible _DSD entries")
Cc: 4.20+ <stable@vger.kernel.org> # 4.20+
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3ba733f879c2a88910744647e41edeefbc0d92b2 upstream.
A maliciously corrupted filesystem can contain cycles in the h-tree
stored inside a directory. That can easily lead to the kernel corrupting
tree nodes that were already verified under its hands while doing a node
split and consequently accessing unallocated memory. Fix the problem by
verifying traversed block numbers are unique.
Cc: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220518093332.13986-2-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 46c116b920ebec58031f0a78c5ea9599b0d2a371 upstream.
Before splitting a directory block verify its directory entries are sane
so that the splitting code does not access memory it should not.
Cc: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220518093332.13986-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 520778042ccca019f3ffa136dd0ca565c486cedd upstream.
Since 3e135cd499 ("netfilter: nft_dynset: dynamic stateful expression
instantiation"), it is possible to attach stateful expressions to set
elements.
cd5125d8f5 ("netfilter: nf_tables: split set destruction in deactivate
and destroy phase") introduces conditional destruction on the object to
accomodate transaction semantics.
nft_expr_init() calls expr->ops->init() first, then check for
NFT_STATEFUL_EXPR, this stills allows to initialize a non-stateful
lookup expressions which points to a set, which might lead to UAF since
the set is not properly detached from the set->binding for this case.
Anyway, this combination is non-sense from nf_tables perspective.
This patch fixes this problem by checking for NFT_STATEFUL_EXPR before
expr->ops->init() is called.
The reporter provides a KASAN splat and a poc reproducer (similar to
those autogenerated by syzbot to report use-after-free errors). It is
unknown to me if they are using syzbot or if they use similar automated
tool to locate the bug that they are reporting.
For the record, this is the KASAN splat.
[ 85.431824] ==================================================================
[ 85.432901] BUG: KASAN: use-after-free in nf_tables_bind_set+0x81b/0xa20
[ 85.433825] Write of size 8 at addr ffff8880286f0e98 by task poc/776
[ 85.434756]
[ 85.434999] CPU: 1 PID: 776 Comm: poc Tainted: G W 5.18.0+ #2
[ 85.436023] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
Fixes: 0b2d8a7b63 ("netfilter: nf_tables: add helper functions for expression handling")
Reported-and-tested-by: Aaron Adams <edg-e@nccgroup.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
[Ajay: Regenerated the patch for v5.4.y]
Signed-off-by: Ajay Kaher <akaher@vmware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 09f871868080c33992cd6a9b72a5ca49582578fa upstream.
Track whether bfq_group is still online. We cannot rely on
blkcg_gq->online because that gets cleared only after all policies are
offlined and we need something that gets updated already under
bfqd->lock when we are cleaning up our bfq_group to be able to guarantee
that when we see online bfq_group, it will stay online while we are
holding bfqd->lock lock.
CC: stable@vger.kernel.org
Tested-by: "yukuai (C)" <yukuai3@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220401102752.8599-7-jack@suse.cz
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ea591cd4eb270393810e7be01feb8fde6a34fbbe upstream.
When the process is migrated to a different cgroup (or in case of
writeback just starts submitting bios associated with a different
cgroup) bfq_merge_bio() can operate with stale cgroup information in
bic. Thus the bio can be merged to a request from a different cgroup or
it can result in merging of bfqqs for different cgroups or bfqqs of
already dead cgroups and causing possible use-after-free issues. Fix the
problem by updating cgroup information in bfq_merge_bio().
CC: stable@vger.kernel.org
Fixes: e21b7a0b98 ("block, bfq: add full hierarchical scheduling and cgroups support")
Tested-by: "yukuai (C)" <yukuai3@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220401102752.8599-4-jack@suse.cz
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3bc5e683c67d94bd839a1da2e796c15847b51b69 upstream.
When bfqq is shared by multiple processes it can happen that one of the
processes gets moved to a different cgroup (or just starts submitting IO
for different cgroup). In case that happens we need to split the merged
bfqq as otherwise we will have IO for multiple cgroups in one bfqq and
we will just account IO time to wrong entities etc.
Similarly if the bfqq is scheduled to merge with another bfqq but the
merge didn't happen yet, cancel the merge as it need not be valid
anymore.
CC: stable@vger.kernel.org
Fixes: e21b7a0b98 ("block, bfq: add full hierarchical scheduling and cgroups support")
Tested-by: "yukuai (C)" <yukuai3@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220401102752.8599-3-jack@suse.cz
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 155ca952c7ca19aa32ecfb7373a32bbc2e1ec6eb upstream.
On Apple T2 Macs, when Linux attempts to read the db and dbx efi variables
at early boot to load UEFI Secure Boot certificates, a page fault occurs
in Apple firmware code and EFI runtime services are disabled with the
following logs:
[Firmware Bug]: Page fault caused by firmware at PA: 0xffffb1edc0068000
WARNING: CPU: 3 PID: 104 at arch/x86/platform/efi/quirks.c:735 efi_crash_gracefully_on_page_fault+0x50/0xf0
(Removed some logs from here)
Call Trace:
<TASK>
page_fault_oops+0x4f/0x2c0
? search_bpf_extables+0x6b/0x80
? search_module_extables+0x50/0x80
? search_exception_tables+0x5b/0x60
kernelmode_fixup_or_oops+0x9e/0x110
__bad_area_nosemaphore+0x155/0x190
bad_area_nosemaphore+0x16/0x20
do_kern_addr_fault+0x8c/0xa0
exc_page_fault+0xd8/0x180
asm_exc_page_fault+0x1e/0x30
(Removed some logs from here)
? __efi_call+0x28/0x30
? switch_mm+0x20/0x30
? efi_call_rts+0x19a/0x8e0
? process_one_work+0x222/0x3f0
? worker_thread+0x4a/0x3d0
? kthread+0x17a/0x1a0
? process_one_work+0x3f0/0x3f0
? set_kthread_struct+0x40/0x40
? ret_from_fork+0x22/0x30
</TASK>
---[ end trace 1f82023595a5927f ]---
efi: Froze efi_rts_wq and disabled EFI Runtime Services
integrity: Couldn't get size: 0x8000000000000015
integrity: MODSIGN: Couldn't get UEFI db list
efi: EFI Runtime Services are disabled!
integrity: Couldn't get size: 0x8000000000000015
integrity: Couldn't get UEFI dbx list
integrity: Couldn't get size: 0x8000000000000015
integrity: Couldn't get mokx list
integrity: Couldn't get size: 0x80000000
So we avoid reading these UEFI variables and thus prevent the crash.
Cc: stable@vger.kernel.org
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9d096e3d3061dbf4ee10e2b59fc2c06e05bdb997 upstream.
When we reconfig we must not send the MAC_POWER command that relates to
a MAC that was not yet added to the firmware.
Ignore those in the iterator.
Cc: stable@vger.kernel.org
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20220517120044.ed2ffc8ce732.If786e19512d0da4334a6382ea6148703422c7d7b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2965c4cdf7ad9ce0796fac5e57debb9519ea721e upstream.
In ieee80211_vif_use_reserved_context(), when we have an
old context and the new context's replace_state is set to
IEEE80211_CHANCTX_REPLACE_NONE, we free the old context
in ieee80211_vif_use_reserved_reassign(). Therefore, we
cannot check the old_ctx anymore, so we should set it to
NULL after this point.
However, since the new_ctx replace state is clearly not
IEEE80211_CHANCTX_REPLACES_OTHER, we're not going to do
anything else in this function and can just return to
avoid accessing the freed old_ctx.
Cc: stable@vger.kernel.org
Fixes: 5bcae31d9c ("mac80211: implement multi-vif in-place reservations")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220601091926.df419d91b165.I17a9b3894ff0b8323ce2afdb153b101124c821e5@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 958ed92922028ec67f504dcdc72bfdfd0f43936a upstream.
This patch tries to fix permission consistency issue as all other
mainline filesystems.
Since the initial introduction of (posix) fallocate back at the turn of
the century, it has been possible to use this syscall to change the
user-visible contents of files. This can happen by extending the file
size during a preallocation, or through any of the newer modes (punch,
zero, collapse, insert range). Because the call can be used to change
file contents, we should treat it like we do any other modification to a
file -- update the mtime, and drop set[ug]id privileges/capabilities.
The VFS function file_modified() does all this for us if pass it a
locked inode, so let's make fallocate drop permissions correctly.
Cc: stable@kernel.org
Signed-off-by: Chao Yu <chao.yu@oppo.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cfd66bb715fd11fde3338d0660cffa1396adc27d upstream.
As Yanming reported in bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=215914
The root cause is: in a very small sized image, it's very easy to
exceed threshold of foreground GC, if we calculate free space and
dirty data based on section granularity, in corner case,
has_not_enough_free_secs() will always return true, result in
deadloop in f2fs_gc().
So this patch refactors has_not_enough_free_secs() as below to fix
this issue:
1. calculate needed space based on block granularity, and separate
all blocks to two parts, section part, and block part, comparing
section part to free section, and comparing block part to free space
in openned log.
2. account F2FS_DIRTY_NODES, F2FS_DIRTY_IMETA and F2FS_DIRTY_DENTS
as node block consumer;
3. account F2FS_DIRTY_DENTS as data block consumer;
Cc: stable@vger.kernel.org
Reported-by: Ming Yan <yanming@tju.edu.cn>
Signed-off-by: Chao Yu <chao.yu@oppo.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f2db71053dc0409fae785096ad19cce4c8a95af7 upstream.
As Yanming reported in bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=215904
The kernel message is shown below:
kernel BUG at fs/f2fs/inode.c:825!
Call Trace:
evict+0x282/0x4e0
__dentry_kill+0x2b2/0x4d0
shrink_dentry_list+0x17c/0x4f0
shrink_dcache_parent+0x143/0x1e0
do_one_tree+0x9/0x30
shrink_dcache_for_umount+0x51/0x120
generic_shutdown_super+0x5c/0x3a0
kill_block_super+0x90/0xd0
kill_f2fs_super+0x225/0x310
deactivate_locked_super+0x78/0xc0
cleanup_mnt+0x2b7/0x480
task_work_run+0xc8/0x150
exit_to_user_mode_prepare+0x14a/0x150
syscall_exit_to_user_mode+0x1d/0x40
do_syscall_64+0x48/0x90
The root cause is: inode node and dnode node share the same nid,
so during f2fs_evict_inode(), dnode node truncation will invalidate
its NAT entry, so when truncating inode node, it fails due to
invalid NAT entry, result in inode is still marked as dirty, fix
this issue by clearing dirty for inode and setting SBI_NEED_FSCK
flag in filesystem.
output from dump.f2fs:
[print_node_info: 354] Node ID [0xf:15] is inode
i_nid[0] [0x f : 15]
Cc: stable@vger.kernel.org
Reported-by: Ming Yan <yanming@tju.edu.cn>
Signed-off-by: Chao Yu <chao.yu@oppo.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 25f8236213a91efdf708b9d77e9e51b6fc3e141c upstream.
As Yanming reported in bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=215894
I have encountered a bug in F2FS file system in kernel v5.17.
I have uploaded the system call sequence as case.c, and a fuzzed image can
be found in google net disk
The kernel should enable CONFIG_KASAN=y and CONFIG_KASAN_INLINE=y. You can
reproduce the bug by running the following commands:
kernel BUG at fs/f2fs/segment.c:2291!
Call Trace:
f2fs_invalidate_blocks+0x193/0x2d0
f2fs_fallocate+0x2593/0x4a70
vfs_fallocate+0x2a5/0xac0
ksys_fallocate+0x35/0x70
__x64_sys_fallocate+0x8e/0xf0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
The root cause is, after image was fuzzed, block mapping info in inode
will be inconsistent with SIT table, so in f2fs_fallocate(), it will cause
panic when updating SIT with invalid blkaddr.
Let's fix the issue by adding sanity check on block address before updating
SIT table with it.
Cc: stable@vger.kernel.org
Reported-by: Ming Yan <yanming@tju.edu.cn>
Signed-off-by: Chao Yu <chao.yu@oppo.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4d17e6fe9293d57081ffdc11e1cf313e25e8fd9e upstream.
As Yanming reported in bugzilla:
https://bugzilla.kernel.org/show_bug.cgi?id=215897
I have encountered a bug in F2FS file system in kernel v5.17.
The kernel should enable CONFIG_KASAN=y and CONFIG_KASAN_INLINE=y. You can
reproduce the bug by running the following commands:
The kernel message is shown below:
kernel BUG at fs/f2fs/f2fs.h:2511!
Call Trace:
f2fs_remove_inode_page+0x2a2/0x830
f2fs_evict_inode+0x9b7/0x1510
evict+0x282/0x4e0
do_unlinkat+0x33a/0x540
__x64_sys_unlinkat+0x8e/0xd0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
The root cause is: .total_valid_block_count or .total_valid_node_count
could fuzzed to zero, then once dec_valid_node_count() was called, it
will cause BUG_ON(), this patch fixes to print warning info and set
SBI_NEED_FSCK into CP instead of panic.
Cc: stable@vger.kernel.org
Reported-by: Ming Yan <yanming@tju.edu.cn>
Signed-off-by: Chao Yu <chao.yu@oppo.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f4df0dbbe62ee8e4405a57b27ccd54393971c773 ]
In the origin code, when "ExtSel" is 1, the eventcode will change to
"eventcode |= 1 << 21”. For event “UNC_Q_RxL_CREDITS_CONSUMED_VN0.DRS",
its "ExtSel" is "1", its eventcode will change from 0x1E to 0x20001E,
but in fact the eventcode should <=0x1FF, so this will cause the parse
fail:
# perf stat -e "UNC_Q_RxL_CREDITS_CONSUMED_VN0.DRS" -a sleep 0.1
event syntax error: '.._RxL_CREDITS_CONSUMED_VN0.DRS'
\___ value too big for format, maximum is 511
On the perf kernel side, the kernel assumes the valid bits are continuous.
It will adjust the 0x100 (bit 8 for perf tool) to bit 21 in HW.
DEFINE_UNCORE_FORMAT_ATTR(event_ext, event, "config:0-7,21");
So the perf tool follows the kernel side and just set bit8 other than bit21.
Fixes: fedb2b5182 ("perf jevents: Add support for parsing uncore json files")
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220525140410.1706851-1-zhengjun.xing@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
