Userspace sends the hbi count as part of acquire. Use that
value to compute min hbi and progam the same in IPP path cfg.
CRs-Fixed: 2772278
Change-Id: Ia41c435b0fb010a3b841fa11bfcdffc4c4a11006
Signed-off-by: Karthik Anantha Ram <kartanan@codeaurora.org>
cdm client check for loading number of clients is
not correct. It does not take error codes into account.
The variable that holds the value is of incorrect
data type.
CRs-fixed: 2768636
Change-Id: Ie5b752aa6bc7a70fe777c16a70a5bdb2e5a663a4
Signed-off-by: Jigar Agrawal <jigar@codeaurora.org>
Ope driver was incorrectly calculating the number
of bw path. This is causing bw to be skip for some
of the ports.
Updated logic to correctly calculate number of path
based on valid path type.
CRs-Fixed: 2715586
Change-Id: I95b6dcfae454713a7b5db6d629310244bb304b19
Signed-off-by: Alok Chauhan <alokc@codeaurora.org>
Enable these format measure error IRQs by default in CSID.
CRs-Fixed: 2767775
Change-Id: Ie23d343cf2ac80d2b22096db3cbfc044a4e64fc9
Signed-off-by: Karthik Anantha Ram <kartanan@codeaurora.org>
When multi map fails, the first mapping does not unmap
due to lack of condition.
CRs-Fixed: 2768768
Change-Id: Ib61ce8f5a73e5c27b1b19bbd23d6649c62feb0da
Signed-off-by: zhuo <zhuo@codeaurora.org>
Add go_cmd after rup_cmd in cdm packet so that bus_rd is triggered
after rup has been configured for IFE.
CRs-Fixed: 2767783
Change-Id: I8978d582825bc0e4edc9f26a1d3f8f988bc11b81
Signed-off-by: Karthik Anantha Ram <kartanan@codeaurora.org>
Currently config counter is being maintained at improper places
as it is increment at configuration parser and decrease at release
dev IOCTL. There are usecase where configuration can come multiple
times without release dev IOCTL being called, in this case config
counter will be out of sync with operation. Also, config counter
is not being use anywhere in any decision making. This change removes
config counter attributes to reduce the future maintenance and better
code readabiltiy. Also, acquire count is correct check to make decision
whether all device are release or not and with that reason update
correct check in release dev IOCTL.
CRs-Fixed: 2759031
Change-Id: Id0f36bc661ef1ae8070cc8d4fc148409c13e30bc
Signed-off-by: Jigarkumar Zala <jzala@codeaurora.org>
At the time of overflow dump bandwidth and axi clock
information from cpas along with the ife clock and csid clock.
In RDI only use case add a check for rdi_irq_status
mask; if it is not present skip checking which port has
resulted in overflow.
CRs-Fixed: 2764286
Change-Id: I8080d140c34f2ab64f7e56b080a0dab57488336e
Signed-off-by: Tejas Prajapati <tpraja@codeaurora.org>
Request id is having uint64 type from request manager, but sensor
driver is handling it with int64. This may cause the out of bound
access while accessing the data. This change corrects the data
type to handle data correctly.
CRs-Fixed: 2759031
Change-Id: I607ea3c123a7b050403e18f7f1bac2a23e1e585f
Signed-off-by: Jigarkumar Zala <jzala@codeaurora.org>
Currently, if dsp clock source is not found in device tree, still
we are trying to enable/disable clock source. Check for availability
of that optional clock before toggling it.
CRs-Fixed: 2762106
Change-Id: I2a4467f5383343bdf1e6607712270f574c76e51e
Signed-off-by: Mukund Madhusudan Atre <matre@codeaurora.org>
Currently per frame array is not getting filled up with NOP packet
settings and as a part of that delete request is picking up wrong
request to get delete. This change fill the request id to the
correct per frame array index for NOP and Update packet.
CRs-Fixed: 2759031
Change-Id: I5ff96851adccc81a8a527d2a5f5b3f8763ebd80f
Signed-off-by: Jigarkumar Zala <jzala@codeaurora.org>
As the name implies, we stop the HW sooner, so prefer it over
"stop at frame boundary".
CRs-Fixed: 2724889
Change-Id: I7fa353c09dbe733e57f099893edc0e7f7fa18e7a
Signed-off-by: Fernando Pacheco <fpacheco@codeaurora.org>
Property 'label' is a reserved property of type string. At present,
device trees use the property as list of strings.
Rename the property to 'cam-smmu-label' to resolve conflict.
CRs-Fixed: 2729703
Change-Id: I8bfb3af4daeaad4cc9dfc633a0256186ba1416c9
Signed-off-by: Anand Ravi <ananravi@codeaurora.org>
Currently settle count is programmed from hardware register data value
metioned in bring up sequence. It is more reliable and suitable to
program the value coming from userspace as that value is more accurate
with respect to sensor specific datarate. This change add logic to
accomplish that operation.
CRs-Fixed: 2759031
Change-Id: I87215b206632d15e2d51d6383345d2ffa16b6b9f
Signed-off-by: Jigarkumar Zala <jzala@codeaurora.org>
Some customers have sensor mode with more blanking width.
Due to this, time is not sufficient for applying
setting thus resulted in frame drops.
To avoid this situation, epoch is calculated on complete
frame and configured at half the frame.
CRs-Fixed: 2757095
Change-Id: I92927c23762f717d6ddca67a7e641422e8fb6d8f
Signed-off-by: Shravya Samala <shravyas@codeaurora.org>
The LX7 processor will require a new mechanism to resume/collapse.
Make the current mechanism transparent to the ICP HW manager in
preparation for the new proc. By going through the hw_ops we let
the device interface decide which mechanism to use.
CRs-Fixed: 2722486
Change-Id: I719314b3f505270a33892cb247082e43dad2e92d
Signed-off-by: Fernando Pacheco <fpacheco@codeaurora.org>
When workqueue is congested, CRM may apply same
request to device which will trigger recovery
due to apply fails. This change prevent CRM
triggering recovery if the current idx is same
with last applied idx.
CRs-Fixed: 2761601
Change-Id: I6ccf44f050a18e8a2a35916f61513ad852e7bdee
Signed-off-by: Depeng Shao <depengs@codeaurora.org>
Add qosgen shaping configuration setup. These parameters
will be tuned for every chipset along with other QoS
settings.
CRs-Fixed: 2755917
Change-Id: Ia75e7afc9148ebe94c7cf184de1158b91bee7028
Signed-off-by: Pavan Kumar Chilamkurthi <pchilamk@codeaurora.org>
Add debugfs setting to route camera logs : ERR,
WARN, INFO, DBG to ftrace.
Add CAM_TRACE macro for adding any new traces in drivers.
Usage:
CAM_TRACE : By default printed in ftrace
CAM_ERR, CAM_WARN, CAM_INFO, CAM_DBG : enable using
debugfs debug_type = 1 or 2
For CAM_DBG : In addition to above enable debug_mdl with
required mask.
adb shell "echo <value> > /sys/module/camera/parameters/debug_type"
All CAM_xx (except CAM_TRACE) logs are routed as below :
0 (default) - only logcat
1 - only ftrace
2 - both logcat and ftrace.
CRs-Fixed: 2762931
Change-Id: I5254a7fef346c7ba21a3ea1eed21e5353f42fd03
Signed-off-by: Pavan Kumar Chilamkurthi <pchilamk@codeaurora.org>
