Currently, in TWT setup command, if peer does not support TWT
capabilities then firmware returns status = 4.
Add condition to check the peer capabilities before sends TWT
setup request to firmware.
Change-Id: Icd1cbeff2db2bdec4e456013e98270a526ff22ce
CRs-Fixed: 3082071
Add support to send beacon received from firmware on STA interface
to mon interface based on management rx filters set by user in
vendor command.
Change-Id: I186ab0d697da831894854d7680265e82dd3adcef
CRs-Fixed: 3073478
Currently, NDP peer multicast address is derived from peer MAC address
and cached in the host. While removing the NDP peer, peer MAC address
is used to search the cached multicast address list. Because of this,
peer multicast address list is not getting freed.
To resolve this, derive peer multicast address from the peer MAC address
while clearing the cached multicast address list.
Since MAX NDP sessions are 8, allocate memory for peer multicast address
list during the NAN vdev private object allocation. This avoids the
special handling for peer multicast list in multiple error scenarios.
Change-Id: Ifbf890a4b9c8be54d84a5b57ed8f6c237ecd51ca
CRs-Fixed: 3085069
In current scenario, SAP is unable to switch from 2.4GHz to
5Ghz if previous CSA happens with reason CSA_REASON_CHAN_PASSIVE.
For instance, SAP starts on 5Ghz with Country US, and later it
changes to country 00 after MCC. Since in country 00, all 5Ghz
channels are passive, so SAP switches to 2.4Ghz with reason
CSA_REASON_CHAN_PASSIVE. Again if MCC happens to country US then
SAP is unable to switch from 2.4Ghz to 5Ghz. This is because
chan_freq_before_switch_band and chan_width_before_switch_band
are not filled in CSA_REASON_CHAN_PASSIVE case.
As part of fix, in wlansap_get_chan_band_restrict(), update the
chan_freq_before_switch_band and chan_width_before_switch_band
incase channel switch reason is CSA_REASON_CHAN_PASSIVE.
Change-Id: I9610b17cff3f6e0e5257270d2fccd5586c9913f9
CRs-Fixed: 3055017
Currently global pause mask is used for controlling individual
AC based sub queues and even all the network queues, due to this
mask is set/reset improperly which is not giving actual global
queue status representation. To avoid this introduced new sub queue
mask which is used while controlling individual network sub queues
and global mask is over for overall network queues.
Change-Id: I6632a1831cbea84c23441dbb67473c94b487109a
CRs-Fixed: 3081060
Fix possible memory leak while updating dual sta connect channel list
in wlan_cm_dual_sta_roam_update_connect_channels.
Change-Id: I39dc05e485a0f00189978a38fa927a6ec4bd0086
CRs-Fixed: 3035192
Print channel list which is allowed for connection for the
second STA when dual sta roaming in is enabled in
wlan_cm_dual_sta_roam_update_connect_channels to enhance
debug log.
Change-Id: I4e16f101b60dc9d34d6193adcfe72ec173c5467a
CRs-Fixed: 3000235
Currently, driver is depending on NS frame to be received to configure
peer multicast address for an NDP session. If there is a delay in NS
frame reception, peer multicast address list will be configured to the
FW without actual peer multicast address. Because of this, FW will drop
the NS frame from NDP peer.
To address this, derive peer multicast address from peer MAC address
and include it in multicast address list that is configured to the FW.
Change-Id: I92a575352d592b4001dc4f061e31eb7f592f8445
CRs-Fixed: 3066990
Add new parameter 128/129 for miracast command to enable/disable
p2p connection time optimization. The command needs to be issued
before p2p negotiation/invitation/connecting, the driver will do some
necessary configuration to reduce the p2p connecting time. At present,
disabling IMPS is the only configuration to achieve it.
Change-Id: I518b0027290d0254313031fe23315b718565e04b
CRs-Fixed: 3031461
When checking the total number of supported rates against the maximum
value of 12, don't include BSS membership selector elements in that
count. The value 12 only correspond to supported rates, not membership
selector elements.
Change-Id: Ic82d4dc9d324880141dfde3e3516a9b9f7f1e743
CRs-fixed: 3049216
If SAE/H2E required by hostapd configure, it must populate in
supported rate or extended support rate set, add host driver support
to check this flag and populate it in extended support rate set.
Change-Id: Id75b5743e93a1a0f1d13150d5436d256e2ca117c
CRs-Fixed: 3016492
For STAUT to follow the rules governing OBSS Narrow Bandwidth RU in
UL OFDMA Tolerance Support, bss_color_collision_det_sta to be set
to 1.
Change-Id: Ibe283f8bec9febbaf9a876d1afd55389ea4c971d
CRs-Fixed: 3053624
In delete pmksa call for FILS case, the userspace sends only the
ssid and cache id on the pmk cache. But the driver copies only the
bssid which could cause invalid bssid being copied and the delete
pmksa operation fails always.
Fill pmksa ssid if SSID and cache id are provided, else copy the
bssid.
Change-Id: If18cfd86983c9fe9ae421295accf12bf1e8de148
CRs-Fixed: 3072262
Current only TYPE_STATION_STATS is designed to be send
by qmi. and other request type should send by wmi.
if sending by qmi, qmi_get/qmi_put should be call to protect
qmi send and qmi response.
Change to check type and only allow TYPE_STATION_STATS to be
send by qmi.
Change-Id: I57b0bdb6717e259606993ea24ef024745a456664
CRs-Fixed: 3073744
Current when open interface, country change work will
start, but as hdd_open is holding psoc sync, it will
wait for 500ms to resched, after 500ms most of the time
the 1st scan comes, it will send WMI_SCAN_CHAN_LIST_CMDID
which cause scan abort.
Change wait time to 30ms, so country work can be finished
asap once hdd_open done, it will not affect 1st scan.
Change-Id: I13064eef7197464598722c0dce3fb1bf361cb841
CRs-Fixed: 3075136
Add ini support for tx_retry_multiplier and send
tx_retry_multiplier to fw as PDEV_STATS_TX_XRETRY_EXT
pdev param, so that fw can multiply the counter by the
percentage provided by user.
Change-Id: Ie2f06dc3aaa4a161a451b68abd085cc1537eb468
CRs-Fixed: 3066799
This change sends the new wow event in the bitmap to FW only
when the roam stats suspend mode attribute is enabled from the
user space.
Also, the new wow reason is added to wake up the host while
sending the roam event stats.
Change-Id: Iaefb229929e8791870f33bf787487f7c20daf218
CRs-Fixed: 3050830
This change gathers the roam event stats from the FW.
New vendor event is used to fill in the vendor attributes
whenever the roam stats are received from Firmware.
Change-Id: I9a2ddef62d26b0b68897891788733df452ac1ceb
CRs-Fixed: 3036518
Add new vendor command to enable the roam events stats from the
driver/FW in both resume and suspend mode.
New roam param is introduced to indicate the FW to enable/disable
the roam stats using the new roam set command.
Change-Id: I6d04f0946e6735613a4cf3d4361bf31052314fa0
CRs-Fixed: 3036518
Currently, we are updating tx failed based upon
MPDU tx fail count received from FW.
In addition to the fail count received from FW
add MPDU tx retries done in case of successful
transmission to tx failed.
Change-Id: Ib993c71a99dd4d59df116a454336716352122a8e
CRs-Fixed: 3058364
WFA cert case expects OCV capability in RSN cap, if
STAUT supports OCV. But, as part of join request
processing, host disables self OCV capability if the
AP doesn't support OCV in beacon.
Delay the OCV capability intersection till the assoc
completion, so that OCV capability gets sent as part
of the assoc request.
Change-Id: I42a65b2506e1cbd791f328f6223b70081c24be25
CRs-Fixed: 3068832
Host sends the EXT CAP IE based on the capability
coming from the supplicant in join request. But, after
roaming the cached join request will be freed. Therefore,
after roaming few capabilities sent by the userspace are
not saved and therefore lost in reassoc request.
Save the EXT CAP IE from the join request in the VDEV
and use the cached capability for sending Ext cap IE.
Change-Id: I71947388b4c6e9e56a5832557416d9b462de70e2
CRs-Fixed: 3038496
Avoid OOB read in sch_get_csa_ecsa_count_offset API by
adding check for ie_len before subtracting element ID len
from it.
Change-Id: Id86e69b2c5abc37a4f33125dc5fd0bd1d92f64a7
CRs-Fixed: 3049251
Avoid OOB read in dot11f_unpack_assoc_response API. Add check
for when nBuf == len to read another byte of pBufRemaining.
Change-Id: Iccdb0b268d16f4169b8b701ade6085d47897f785
CRs-Fixed: 3042293
cfg80211 resume request will be rejected if there is an SSR in
progress, Because of this modules are not coming out of suspend state
when there is an SSR after suspend request.
To avoid this, resume all modules before recovery shutdown.
Change-Id: I3d749e0a5971468805a009cb990a220e0645c169
CRs-Fixed: 3016002
With connection manager enabled, the send IE request is
not sent after connection.
Add support to send set IE request after connection is
successful in connection manger.
Change-Id: I2f30eb67ba295e0ca416ccb40e12a376e0d7a47e
CRs-Fixed: 2976734
The extended capabilities IE is sent during vdev create and
this doesn't have the merged extended capabilities from the
userspace. So some of the fields advertised in association
request are not advertised in the re-association request.
Fix the missing fields not set in the extended capabilities IE
by sending the set IE message to LIM after connection is
successful.
Change-Id: I322d057f602e0362f12b362e7818e84cbb056cf4
CRs-Fixed: 2971072
