Throw out BATT_PSY power_supply_changed
when mmi_register_charger_driver success.
It order to update the battery status more timely.
Change-Id: I7ea63a9340c44a2393ac86ab2b6cb94c62cb5905
Signed-off-by: xuwt2 <xuwt2@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2592493
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Yonghua Yan <yanyh2@motorola.com>
Reviewed-by: Tao Sun <suntao2@motorola.com>
Submit-Approved: Jira Key
sc->thermal_ratio assign to default value, so no need retrun failed if
not define thermal-ratio in dts, or sc760x may register failed
Change-Id: I8f0494c85bf36caad9aa8d5340d8bcc70e779b5a
Signed-off-by: xuxj <xuxj12@motorola.com>
Reviewed-on: https://gerrit.mot.com/2592059
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Reviewed-by: Wentao Xu <xuwt2@motorola.com>
Tested-by: Jira Key
Reviewed-by: Guobin Zhang <zhanggb@motorola.com>
Submit-Approved: Jira Key
bangkok:remove focaltech fod log,because too many logs in
interrupts can cause system crash
Change-Id: Ia7444d41a1e60398b5524938299e457b8f96527d
Reviewed-on: https://gerrit.mot.com/2574799
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Wei Deng <dengwei1@motorola.com>
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key
Dual battery thermal mitigation, Add equal ratio thermal level control
Define THERMAL_RATIO_CONTRO to enable this feature.
It will ignore thermal-mitigation-level and force to rewite new thermal
level through calculating the (batt_fcc_ma/thermal-ratio) of parnter
battery
Change-Id: Ib44eccfe540b6d8d705bb53fb5001207288a7b85
Signed-off-by: xuwt2 <xuwt2@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2567981
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: litong <litong20@motorola.com>
Reviewed-by: Guobin Zhang <zhanggb@motorola.com>
Submit-Approved: Jira Key
In order to debug the problem of fuel gauge soc jumping,
add some debug logs,
Change-Id: I5b6adf50d496126059366a0c322915a0f533acd4
Reviewed-on: https://gerrit.mot.com/2567828
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Wentao Xu <xuwt2@motorola.com>
Reviewed-by: Tao Sun <suntao2@motorola.com>
Submit-Approved: Jira Key
Before communicate with touch IC after receive gesture irq,need wait pm
resume success or read gesture data will fail.
Change-Id: I55cfdc41244e1b9f159770046be64bed337f0d18
Signed-off-by: Wenge Zhu <zhuwg1@motorola.com>
Reviewed-on: https://gerrit.mot.com/2558492
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
some focaltech tp no touch : modify timing of iovcc and
vdd,first vdd,the second is iovcc.and issue is already fixed.
Change-Id: I8170cb474d84c50ab068fecfda88679419710f5e
Reviewed-on: https://gerrit.mot.com/2554227
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Wei Deng <dengwei1@motorola.com>
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key
Added documentation for led trigger support with sol tri led
wrt battery status.
This will add trigger driver on top of QTI Tri-led driver
Change-Id: I050a9f42f9b2b3af156d8c86cca28a0151385b74
Signed-off-by: Srihari Sathyanarayana <sriharis@motorola.com>
Change-Id: I050a9f42f9b2b3af156d8c86cca28a0151385b74
Reviewed-on: https://gerrit.mot.com/2523300
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Perry White <awhite6@motorola.com>
Reviewed-by: Vijayakumar Gn <vijaygn@motorola.com>
Reviewed-by: Mahesh Med(CR) <maheshmk@motorola.com>
Reviewed-by: Guobin Zhang <zhanggb@motorola.com>
Submit-Approved: Jira Key
The unit of thermal_fcc_ua is ua, but the
unit of target_fcc is ma.
Change-Id: Ic7065344f417adbd840efe473005861a69428e70
Reviewed-on: https://gerrit.mot.com/2536876
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Wentao Xu <xuwt2@motorola.com>
Reviewed-by: Guobin Zhang <zhanggb@motorola.com>
Submit-Approved: Jira Key
1. Disable charger only when charger is offline and vbus is bad.
2. Get charger status from wireless charger if wireless charger present.
3. Get charger ibus limit from charger current_max property
indicating the AICL value for BC1.2 charger.
Change-Id: I0ff51a15d6faf4f545fcda200ae531240e531e04
Signed-off-by: Yonghua Yan <yanyh2@motorola.com>
Reviewed-on: https://gerrit.mot.com/2536492
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Guobin Zhang <zhanggb@motorola.com>
Submit-Approved: Jira Key
user ibat set failed in factory test
Change-Id: I395103e82dd60b5ed5f55a7953222d809fb1b700
Signed-off-by: xuxj12 <xuxj12@motorola.com>
Reviewed-on: https://gerrit.mot.com/2534444
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Wentao Xu <xuwt2@motorola.com>
Reviewed-by: Tao Sun <suntao2@motorola.com>
Submit-Approved: Jira Key
sc760x:
If there is no user configuration, set the value of thermal limit.
Change-Id: I0866031ab7f33445846d868d2fa4202c51812185
Reviewed-on: https://gerrit.mot.com/2532545
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Wentao Xu <xuwt2@motorola.com>
Reviewed-by: Tao Sun <suntao2@motorola.com>
Submit-Approved: Jira Key
Upgrade Egis SDK to v1.0.10 on Pnangn
Add necessary feature in driver to support v1.0.10
Change-Id: Ifcbbb5a3c845f65e1fb2449527d678c564bbdbca
Reviewed-on: https://gerrit.mot.com/2530517
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: liujian <liujian24@lenovo.com>
Reviewed-by: Wang Wang <wangwang1@lenovo.com>
Submit-Approved: Jira Key
On closed Oberon unit we saw SOL led not blinking due to sync issue of
led_set_brightness with blink set.
Add led_set_brightness_sync which is a blocking call till blink set.
This will enable setting blink smoothly without conflict with brigtness.
The patch will also use flush_work before setting brightness so no more
delay required before new brigtness setting.
Change-Id: I840cb3398b40725bd928816f4871cbdcba6759a1
Signed-off-by: Srihari Sathyanarayana <sriharis@motorola.com>
Reviewed-on: https://gerrit.mot.com/2526344
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Vijayakumar Gn <vijaygn@motorola.com>
Reviewed-by: Qing Chang <qing@motorola.com>
Submit-Approved: Jira Key
