qctecmdr
7834c33501
Merge "ARM: dts: msm: add PCIe AUX clk freq for sa6155, sa8155, sa8195"
2021-02-25 11:46:46 -08:00
qctecmdr
596495589c
Merge "ARM: dts: msm: Add vreg.sp and gpio.sp resources for lahaina"
2021-02-25 06:25:37 -08:00
qctecmdr
6207abc986
Merge "ARM: dts: msm: add pci DT nodes for PCIe switch for sdxlemur CPE"
2021-02-25 06:25:37 -08:00
qctecmdr
536f50a2ae
Merge "ARM: dts: msm: Add firmware support for SA8195"
2021-02-25 06:25:36 -08:00
qctecmdr
c010cb3b53
Merge "ARM: dts: msm: Add firmware support for SA6150"
2021-02-25 06:25:36 -08:00
qctecmdr
62c92dafde
Merge "ARM: dts: msm: Add PCIE clocks to protected list for YUPIK"
2021-02-25 06:25:35 -08:00
qctecmdr
055e992283
Merge "ARM: dts: msm: Add qseecom node for sa8195 GVM"
2021-02-24 20:57:36 -08:00
qctecmdr
ca48ac804a
Merge "ARM: dts: msm: Enlarge the minidump cma area for SM8150"
2021-02-24 20:57:36 -08:00
qctecmdr
7d430e243d
Merge "ARM: dts: msm: Enable qcom,power-always-on for GPU SMMUs on GKI targets"
2021-02-24 20:57:36 -08:00
qctecmdr
5a9def8b4e
Merge "ARM: dts: qcom: thermal zones definition for thermistors on Lahaina HHG"
2021-02-24 20:57:36 -08:00
qctecmdr
967e163d3d
Merge "ARM: dts: msm: Update S1B and S8B min voltages on yupik"
2021-02-24 20:57:36 -08:00
qctecmdr
ff153a7c2c
Merge "dt-bindings: Add support for GDSC flag to map single GDSCR"
2021-02-24 20:57:36 -08:00
qctecmdr
931ab2d662
Merge "ARM: dts: msm: Enable qseecom on sdxnightjar"
2021-02-24 20:57:36 -08:00
qctecmdr
78257b0d55
Merge "ARM: dts: msm: Fix IPA doorbell address for sdxlemur"
2021-02-24 06:59:32 -08:00
qctecmdr
2647d55a41
Merge "ARM: dts: msm: Enable touch support on lahaina MTP 2.1"
2021-02-24 06:59:32 -08:00
qctecmdr
fa4002a6fa
Merge "ARM: dts: msm: Remove PCIE clocks from protected list for YUPIK IOT"
2021-02-24 06:59:31 -08:00
qctecmdr
5722a8d7c9
Merge "ARM: dts: msm: Add mpm2 sleep counter for sm8150"
2021-02-24 00:44:04 -08:00
qctecmdr
ab09a17225
Merge "ARM: dts: msm: add quat/quin slpi pinctrl info on sm615x platform"
2021-02-24 00:44:04 -08:00
qctecmdr
bd5f987078
Merge "ARM: dts: msm: Update qpic nand bus vote to nominal voltage"
2021-02-24 00:44:03 -08:00
qctecmdr
c56ee0208f
Merge "ARM: dts: msm: Add clock for SLPI pinctrl for SM8150"
2021-02-24 00:19:56 -08:00
qctecmdr
7488393dd1
Merge "ARM: dts: msm: Add firmware support for SM8150"
2021-02-24 00:19:56 -08:00
qctecmdr
d267e9242d
Merge "ARM: dts: msm: Add scm node for msmsteppe"
2021-02-24 00:19:56 -08:00
qctecmdr
e3a08c1bb3
Merge "ARM: dts: msm: Add qcom,usb-charger dt prop on sdxlemur"
2021-02-24 00:19:56 -08:00
qctecmdr
17392f33f1
Merge "ARM: dts: msm: Add virtual subsystem notification nodes for SA8155 VM"
2021-02-24 00:19:56 -08:00
qctecmdr
b202d468c2
Merge "ARM: dts: msm: Add ADSP remoteheap vmlist for SA8155"
2021-02-24 00:19:56 -08:00
qctecmdr
d9d0b0bfee
Merge "ARM: dts: msm: Add device nodes for FastRPC and CDSP Loader for SM6150"
2021-02-24 00:19:56 -08:00
katamoni sai abhilash
bfd9346b1a
ARM: dts: msm: Add qseecom node for sa8195 GVM
...
Add dts entry for qseecom node for sa8195
Change-Id: I7c0b7f3581a5f23d7a125413fb76c2be081e1ec9
2021-02-23 14:54:47 +05:30
wadesong
7061f3b8d6
ARM: dts: msm: Enlarge the minidump cma area for SM8150
...
Enlarge the minidump cma area due to a number of new DTSI nodes
(mainly related to CPU cache minidumps) have been added, which
require more space.
Change-Id: I8826f367433c6a26c5f1538166c4edc592996eb3
2021-02-23 14:17:19 +05:30
Charan Teja Kalla
12db5c3eb3
ARM: dts: msm: Enable qcom,power-always-on for GPU SMMUs on GKI targets
...
When unmapping memory, the SMMU driver must access the GPU SMMU's
register space, so it must vote for power resources to access the TLB
invalidation registers. When the GPU is in slumber, there aren't votes
for the GPU SMMU's power resources, so the SMMU driver constantly ends
up enabling/disabling the power resources, which takes a considerable
amount of time. When paired with the suboptimal IOMMU page table
management code, this leads to performance issues where the time taken
to unmap memory is large.
Thus, for all targets that support GKI, add the qcom,power-always-on
property for the GPU SMMUs of these targets, to remove the latency
incurred by having to enable/disable power resources in the GKI
configuration.
Change-Id: I403c9864705c50f7ce8b1118c3c75902708e647b
2021-02-23 10:40:00 +05:30
Taniya Das
d8c51bb7f3
ARM: dts: msm: Remove PCIE clocks from protected list for YUPIK IOT
...
The PCIE clocks are required to be accessed, thus remove them from the
protected list.
Change-Id: I4800f708fbb2a3502dc46ec7d33427c70391bfb3
2021-02-23 08:43:42 +05:30
Minghao Zhang
555339fcab
ARM: dts: qcom: thermal zones definition for thermistors on Lahaina HHG
...
On Lahaina HHG quiet-therm-usr uses PM8350 AMUX2 channel, qtm-w-therm-usr
uses PM8350 AMUX4 channel and qtm-n-therm-usr uses PM8350 GPIO1 channel.
Meanwhile disable camera-therm-usr, rear-cam-therm-usr and tof-therm-usr
using these channels.
Change-Id: I4bf20074e2c4f8ef815667ff2e8c3e5574522e47
2021-02-23 09:58:46 +08:00
Tony Truong
c8abb4b9be
ARM: dts: msm: add pci DT nodes for PCIe switch for sdxlemur CPE
...
If there is a switch connected to PCIe root complex, the
devicetree hierarchy needs to correctly reflect the physical
connection. Add pci DT nodes for each switch device such as
switch upstream and downstream ports for sdxlemur CPE.
Change-Id: I04ddd33adc67f0ec689d014cd00ed5fa26d02a89
2021-02-22 14:13:55 -08:00
Tony Truong
fea9ea1924
ARM: dts: msm: expand iommu-map to support PCIe switch on sdxlemur CPE
...
Additional BDF to SID mappings are needed if a switch and
mutliple endpoints are connected to PCIe root complex. Expand
iommu-map for PCIe on sdxprarie CPE to support such a usecase.
Change-Id: Id7643ab574b1472649bb70121da70a40f31c806c
2021-02-22 14:10:55 -08:00
Shreyas K K
096ca9f66a
ARM: dts: msm: Add clock for SLPI pinctrl for SM8150
...
Add clock node to SLPI pinctrl driver for SM8150 target.
Change-Id: I1cebf2f526e8e8a8815d13c984b5d304f57e250f
2021-02-22 14:36:15 +05:30
Rama Krishna Phani A
a52241f29d
ARM: dts: msm: add PCIe AUX clk freq for sa6155, sa8155, sa8195
...
Replace deprecated PCIe DT entry for PCIe AUX clock controller
setting with the correct entry and value. PCIe core controller
requires AUX clock to be 19.2MHz.
Change-Id: Ia670d8e75f75939c2798d795e21771402d83569c
2021-02-22 00:41:04 -08:00
Saurabh Ambulkar
641b096b16
ARM: dts: msm: Add mpm2 sleep counter for sm8150
...
Add mpm2 sleep counter to support boot time marker.
Change-Id: I42949d9baadd2211ed2dbc08f22e2eb07e727675
2021-02-21 22:48:12 -08:00
Taniya Das
13cfc50730
ARM: dts: msm: Add PCIE clocks to protected list for YUPIK
...
The PCIE clocks are not required to be accessed, thus add them in
protected list.
Change-Id: I6af84f7b33af1ce695b8ccd14755b0ace23c2c75
2021-02-21 22:20:16 -08:00
Vinay Sudra
cc4037f5ee
ARM: dts: msm: Add firmware support for SA8195
...
Add firmware node which is parsed by android init to
mount system and vendor partition.
Change-Id: Id32af33954fc91a1b00f281ce11fa121912a1747
2021-02-22 10:45:50 +05:30
Vinay Sudra
eab8520244
ARM: dts: msm: Add firmware support for SM8150
...
Add firmware node which is parsed by android init to
mount system and vendor partition.
Change-Id: I0417512750d485d034af311ce2d439e520875819
2021-02-22 10:28:55 +05:30
Anuj Garg
a71bcb26fc
ARM: dts: msm: Add device nodes for FastRPC and CDSP Loader for SM6150
...
Add fastrpc device tree nodes for CDSP, ADSP and SDSP for sm6150.
Add cdsp loader device tree node for sm6150.
Change-Id: Ia738b76525f3995dd731fd94f280abdfa7ed927b
2021-02-22 09:52:50 +05:30
Anuj Garg
7270c29902
ARM: dts: msm: Add device nodes for FastRPC and CDSP Loader for SA8195
...
Add fastrpc device tree nodes for CDSP, ADSP and SDSP for sa8195.
Add cdsp loader device tree node for sa8195.
Change-Id: Iac2cb70ceebceedd6adaea2efa41794c6034c350
2021-02-21 20:13:34 -08:00
Anuj Garg
bb76eb34ac
ARM: dts: msm: Add ADSP remoteheap vmlist for SA8155
...
This change add the remote heap vmid list in the device tree
for dynamically hyp assign the memory.
Change-Id: I7637a84cb0520367b02d951b6e5e88ef2a4e02ec
2021-02-22 09:41:34 +05:30
Phanindra Babu Pabba
5828048cf6
ARM: dts: msm: Enable qseecom on sdxnightjar
...
Add device tree entries to enable qseecom on
sdxnightjar target.
Change-Id: I50059575733e14b0935b68f42a01c409a34650ba
2021-02-21 23:34:48 +05:30
Santosh Dronamraju
85cce0be5b
ARM: dts: msm: Add scm node for msmsteppe
...
Add scm node under firmware for msmsteppe.
Change-Id: I1aab35ff99c0fe1a1099c66376edb7c505d0b7d8
2021-02-21 02:22:01 -08:00
Ravikanth Tuniki
8f966e7b6e
ARM: dts: msm: Enable touch support on lahaina MTP 2.1
...
This change adds touch support for r66451 dsc fhd plus
60fps command mode panel on lahaina.
Change-Id: I7b5e396bc52c02b8e879b1a947b40cea83aa3bbe
2021-02-20 11:46:59 -08:00
qctecmdr
4d6b6295fe
Merge "dt-bindings: arm: msm: add mhi registers entry for PCIe RC"
2021-02-19 22:41:22 -08:00
qctecmdr
8df2b2480d
Merge "ARM: dts: msm: Add support for kgsl driver on SA6155"
2021-02-19 22:41:22 -08:00
qctecmdr
17001487eb
Merge "ARM: dts: msm: Correct parent regulator for sdxlemur VDD_CX_LEVEL_AO"
2021-02-19 22:41:22 -08:00
qctecmdr
b16e06e97d
Merge "ARM: dts: msm: Add RDPM register map for yupik GPU"
2021-02-19 22:41:22 -08:00
qctecmdr
3b3af487e5
Merge "ARM: dts: msm: add panel in ECM device for yupik QRD platform"
2021-02-19 22:41:22 -08:00