- fix to expose the full flash windows on ast2400.
-----BEGIN PGP SIGNATURE-----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=q9Dz
-----END PGP SIGNATURE-----
Merge tag 'aspeed-4.14-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into next/dt
Pull "Aspeed devicetree updates for 4.14" from Joel Stanley:
- fix to expose the full flash windows on ast2400.
* tag 'aspeed-4.14-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed:
ARM: dts: aspeed-g4: fix AHB window size of the SMC controllers
Fix PCI bus dtc warnings.
-----BEGIN PGP SIGNATURE-----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=6neG
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt-4.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt
Pull "Samsung DTS ARM changes for v4.14, part 2" from Krzysztof Kozłowski:
Fix PCI bus dtc warnings.
* tag 'samsung-dt-4.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos: fix PCI bus dtc warnings
The window of the Aspeed AST2400 SMC Controllers to map chips on the
AHB Bus has a 256MB size. The full window range is
[ 0x20000000 - 0x2FFFFFFF ] for the FMC controller
[ 0x30000000 - 0x3FFFFFFF ] for the SPI controller
This change requires CONFIG_VMSPLIT_2G to be set.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
- Remove earlycon
- Use C pre-processor
- Add fpga full region
- Add ethernet-phy as device-type
- Add adv7511 nodes to zc70x
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAlmaypgACgkQykllyylKDCEpkACgkWAijGmJRMDb5HvrH7npUkwz
QRkAnjQCUrRIO5RbuXob5fIZurV2kMwn
=7Ggj
-----END PGP SIGNATURE-----
Merge tag 'zynq-dt-for-4.14' of https://github.com/Xilinx/linux-xlnx into next/dt
Pull "arm: Xilinx Zynq DT fixes for v4.14" from Michal Simek:
- Remove earlycon
- Use C pre-processor
- Add fpga full region
- Add ethernet-phy as device-type
- Add adv7511 nodes to zc70x
* tag 'zynq-dt-for-4.14' of https://github.com/Xilinx/linux-xlnx:
arm: zynq: Remove earlycon from bootargs
arm: zynq: Use C pre-processor for includes in dts
arm: zynq: Label whole PL part as fpga_full region
arm: zynq: Add device-type property for zynq ethernet phy nodes
arm: zynq: Add adv7511 on i2c bus for zc70x
This adds the operating points to the Ux500 device tree and
deletes the old special-purpose cpufreq node, as we can now
use the generic DT cpufreq driver.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Earlyconsole is used for early kernel debugging that's why this option
shouldn't be enabled by default.
Earlyconsole is partially copying the part of the bootlog after
"bootconsole [uart0] disabled".
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Change the dtsi include code to use the C pre-processor #include instead
of the device tree /include/. This brings all Zynq device trees inline
with each other.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Mention device-type = "ethernet-phy", as qemu will need this in absence
of compatible.
Signed-off-by: Sai Pavan Boddu <saipava@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
This adds a new node for the LEGO MINDSTORMS EV3 LCD display.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
dtc recently added PCI bus checks. Fix these warnings.
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Russell King <linux@armlinux.org.uk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* Add RZ/G1M (r8a7743) binding to apmu driver
This allows SMP to be supported on the RZ/G1M SoC
* Add bindings for iW-RainboW-G22D-SODIMM RZ/G1E SODIMM development kit
This is in preparation for adding DTS to support this hardware
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJZlWDoAAoJENfPZGlqN0++u+IP/097qIrO8k05/G4pulox3N+H
bRa8FF6UNQq5XIKy3I/jz19zNDo0FxnqF23kVaDzakrgS0A/B9cTL3k9XNEsPaty
1D5BOj4Dv53rpMJjXrVpaM54wRmdvVCk8VVHPwoduJgn9TTv6vOFa8TxN4L7aI6T
pu/RjKOVN4V31b+0dENs0Uz4u/AEcpTfrjuzrVseO2zBfLnJHSRUnxXhnuCUC6qd
db7xDVVvwhd6B0GuAzu2c0EBhXKO/C6epF5aqiGN0auZgeNcjT6EEOUpmhmQxFOm
9iURVNUtwUQPcqzHvJ4bJdLN0OltSIxiBySvd59YTu62v4gvBxfPS4HE1lx9B/F2
PWbQWX4s+38vB5qmZSznFDavVRYEUPdvjuk9OdkzhNyYyRVie010+qcqcdALB5rj
ehB/3V0J+yr+7RfwNECiWSqZZWACZHtCsMXz1VK/AE8P9Ltr7IinvgJ/+6aRGONa
BGOn5NTuTKh7fFrwJ64Pt8vcSjOHBXX4dMbQkENYQloYPjFY9ClkhMHsacG8kxdZ
27EXAZcFgSTLfWdbL6nzjRf5Np6JNn6CSSr7z/8Iw8KEPgj5D0MKSyVjHZPNyvbI
U+SDDnXt99nDcZSifWzf/U4Vfhoe+cybfc2umz4OkjOTI6Ep8jRdrsEEf+xy+wmN
40ipe1aPB1oyqKR1AG44
=uw/C
-----END PGP SIGNATURE-----
Merge tag 'renesas-dt-bindings2-for-v4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt
Pull "Second Round of Renesas ARM Based SoC DT Bindings Updates for v4.14" from Simon Horman:
* Add RZ/G1M (r8a7743) binding to apmu driver
This allows SMP to be supported on the RZ/G1M SoC
* Add bindings for iW-RainboW-G22D-SODIMM RZ/G1E SODIMM development kit
This is in preparation for adding DTS to support this hardware
* tag 'renesas-dt-bindings2-for-v4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
dt-bindings: apmu: Document r8a7743 support
ARM: shmobile: document iW-RainboW-G22D SODIMM SOM Development Platform
ARM: shmobile: document iW-RainboW-G22M-SM SODIMM System on Module
* Use newly added Gen-3 fallback compat string
This is consistent with ongoing efforts to use per-generation
fallback strings where appropriate across devices found
on R-Car SoCs. The aim of the effort being to strike a balance
between the limited information available about the compatibility
of devices found on different SoCs and the desire to ease enabling
devices on new SoCs.
This has no run-time effect due to the presence of a per-SoC
compat string.
* Enable second CPU core on RZ/G1M (r8a7743)
The RZ/G1M has two CA15 cores running at up to 1.5GHz
* Enable frequency scaling on RZ/G1M (r8a7743)
* Add six I2C cores to RZ/G1M (r8a7743) SoC DT
This is a step towards enabling these cores on boards that use this SoC
* Add CEC clock for HDMI transmitter to R-Car M2-W (r8a7791) Koelsch
Hans Verkuil says "The adv7511 on the Koelsch board has a 12 MHz fixed
clock for the CEC block. Specify this in the dts to enable CEC support."
* Add PFC support to RZ/G1E (r8a7745) SoC and add Ethernet and SCIF2
pins to SK-RZG1E board.
This allows the kernel to control multiplexed pins for Ethernet
and SCIF2 rather than relying on setup inherited at boot.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=G9vX
-----END PGP SIGNATURE-----
Merge tag 'renesas-dt2-for-v4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt
Pull "Second Round of Renesas ARM Based SoC DT Updates for v4.14" from Simon Horman:
* Use newly added Gen-3 fallback compat string
This is consistent with ongoing efforts to use per-generation
fallback strings where appropriate across devices found
on R-Car SoCs. The aim of the effort being to strike a balance
between the limited information available about the compatibility
of devices found on different SoCs and the desire to ease enabling
devices on new SoCs.
This has no run-time effect due to the presence of a per-SoC
compat string.
* Enable second CPU core on RZ/G1M (r8a7743)
The RZ/G1M has two CA15 cores running at up to 1.5GHz
* Enable frequency scaling on RZ/G1M (r8a7743)
* Add six I2C cores to RZ/G1M (r8a7743) SoC DT
This is a step towards enabling these cores on boards that use this SoC
* Add CEC clock for HDMI transmitter to R-Car M2-W (r8a7791) Koelsch
Hans Verkuil says "The adv7511 on the Koelsch board has a 12 MHz fixed
clock for the CEC block. Specify this in the dts to enable CEC support."
* Add PFC support to RZ/G1E (r8a7745) SoC and add Ethernet and SCIF2
pins to SK-RZG1E board.
This allows the kernel to control multiplexed pins for Ethernet
and SCIF2 rather than relying on setup inherited at boot.
* tag 'renesas-dt2-for-v4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: dts: r8a7791: Use R-Car SATA Gen2 fallback compat string
ARM: dts: r8a7790: Use R-Car SATA Gen2 fallback compat string
ARM: dts: r8a7743: Add OPP table for frequency scaling
ARM: dts: r8a7743: Add APMU node and second CPU core
ARM: dts: koelsch: Add CEC clock for HDMI transmitter
ARM: dts: sk-rzg1e: add Ether pins
ARM: dts: sk-rzg1e: add SCIF2 pins
ARM: dts: r8a7745: add PFC support
ARM: dts: r8a7743: Add I2C DT support
One fix for Tegra124 to hook the host1x device up with the SMMU.
The remainder of this enables USB device mode on a couple of boards
where the port is currently unused.
-----BEGIN PGP SIGNATURE-----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=0VoF
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.14-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt
Pull "ARM: tegra: Device tree changes for v4.14-rc1" from Thierry Reding:
One fix for Tegra124 to hook the host1x device up with the SMMU.
The remainder of this enables USB device mode on a couple of boards
where the port is currently unused.
* tag 'tegra-for-4.14-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: Enable UDC on AC100
ARM: tegra: Enable UDC on Jetson TK1
ARM: tegra: Enable UDC on Dalmore
ARM: tegra: Enable UDC on Beaver
ARM: tegra: Register host1x node with IOMMU binding on Tegra124
- A clean up patch from Shawn Lin to remove the deprecated dwmmc
property 'num-slots'.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJZloxmAAoJEFBXWFqHsHzOmiYH/3dBPc18iMgsEjHJ73FUJCb8
RvIxN/o4W60Kokm+vsrNHx3LfZYUCfgQCeHlYCHpL1jFGpwD0DBxNQ9QlMDG+TCa
IN+c32aB0a0U0RHl+c5jKLqPy4eVvD4NNDWGVpwjSpK/MARrsKjhEwr/Yjcrj87c
+miIiXBmTsUhzwXQF1UkK719rXI7tgZQNqO06qxJN0QxwKajZPyZzRbe1kgI1xQK
k7F8WG3OGxyRJYRt/qnovnCv7lDX1Jk4S0ySqhocEyyqkqUOXElRARWZOyP3D8CY
wJQIHRzlM/ffqDpbQDa17YuGmnMgsHZ/+Fa8tHvdL353Ow0TM6KkjoRGTd8F4GI=
=WoGP
-----END PGP SIGNATURE-----
Merge tag 'zte-dt-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt
Pull "ZTE device tree updates for 4.14" from Shawn Guo:
- A clean up patch from Shawn Lin to remove the deprecated dwmmc
property 'num-slots'.
* tag 'zte-dt-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: zte: remove num-slots from zx296702-ad1
- A series from Andrew Lunn updating imx6-rdu2 board to enable
on-board Marvell switch support.
- A series from Jagan Teki updating imx6ul-isiot and imx6ul-geam to
enable audio card and FEC support.
- Add support for Toradex Ixora V1.1 and Apalis Evaluation Board
along with some cleanups.
- Enable DRM display support for imx6ul-evk and imx7d-sdb board.
- Add i.MX53 based Beckhoff CX9020 board support.
- Add GPMI NAND and APBH DMA devices for i.MX7 and enables NAND support
for imx7-colibri board.
- Enables the ADV7180 analog video decoder sensor connected to the
IMX6 IPU on various Gateworks Ventana boards.
- Minor updates on misc boards and some random cleanups.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJZloV7AAoJEFBXWFqHsHzOeIAH/ieM8fZEeUHO9waD4aoQJulp
kQHbJFKlEaQrB/y9LVUmNae0w/dpOaf5k/NVtfLQAZQhMqN6Y9XFQA0fnUAgiNbs
fknQpL6VnrO7nGUDEbIUommrRDPEVN9SEiiPpLpD938QjUDxTAibb8++QQOHC/S6
NLQbYMvubDTaUXkOiRodLQU6U/RQ5Byzmu+ytuKjlB1la0OzMegebD/OMXZtgysx
hcEDVBIEZmQO1TPrl5p6IZjjdHs1ua4gfRLQWq1RPXECakHJuyCPKILibyRID15j
w0C+sTxP1uIN950VYzufrbLIdyheWHSrx0FZSWa7tnus8W+h8kBAUd6NxyHLiyU=
=0Cwx
-----END PGP SIGNATURE-----
Merge tag 'imx-dt-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt
Pull "i.MX device tree updates for 4.14" from Shawn Guo:
- A series from Andrew Lunn updating imx6-rdu2 board to enable
on-board Marvell switch support.
- A series from Jagan Teki updating imx6ul-isiot and imx6ul-geam to
enable audio card and FEC support.
- Add support for Toradex Ixora V1.1 and Apalis Evaluation Board
along with some cleanups.
- Enable DRM display support for imx6ul-evk and imx7d-sdb board.
- Add i.MX53 based Beckhoff CX9020 board support.
- Add GPMI NAND and APBH DMA devices for i.MX7 and enables NAND support
for imx7-colibri board.
- Enables the ADV7180 analog video decoder sensor connected to the
IMX6 IPU on various Gateworks Ventana boards.
- Minor updates on misc boards and some random cleanups.
* tag 'imx-dt-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (47 commits)
ARM: dts: imx6q-bx50v3: Enable i2c recovery mechanism
ARM: dts: imx6q-apalis-eval: add support for Apalis Evaluation Board
ARM: dts: imx6: add support for Toradex Ixora V1.1 carrier board
ARM: dts: imx6qdl-apalis: imx6q-apalis-ixora: use i2c from dwc hdmi
ARM: dts: imx6q-apalis-ixora: add camera i2c bus definition
ARM: dts: imx6q-apalis-ixora: get rid of obsolete fusion comment
ARM: dts: imx6qdl-apalis: reword cam i2c comment
ARM: dts: imx6qdl-apalis: imx6q-apalis-ixora: get rid of tegra legacy gen1_i2c comment
ARM: dts: imx6q-apalis-ixora: combine aliases
ARM: dts: imx6qdl-apalis: split usdhc1 pinctrl to support 4- and 8-bit
ARM: dts: imx6q-apalis-ixora: fix usdhc2 pinctrl property
ARM: dts: imx6ul-liteboard: Support poweroff
ARM: dts: imx: add CX9020 Embedded PC device tree
ARM: dts: imx53: add alternative UART2 configuration
ARM: dts: imx53: add srtc node
dt-bindings: arm: Add entry for Beckhoff CX9020
ARM: dts: i.MX25: add RNGB node to dtsi
ARM: dts: imx6ul-14x14-evk: Remove unrelated pin from ENET group
ARM: dts: imx7d-sdb: Add flexcan support
ARM: dts: imx7-colibri: add NAND support
...
4.14, please pull the following:
- Eric moves the bcm2837 DT file from arm64 to arm because it created a maintenance
problem and would have required either duplication or cross merges
- Stefan changes how the pinmuxing is defined and pushes it at the board level
to support Raspberry Pi Zero Wireless. He then adds supports for the actual
Raspberry Pi Zero Wireless board along with binding documentation. Stefan
also defines a proper SMP enable-method property and binding for BCM2836
(Raspbery Pi 2)
- Rafal describes the BCM5301X USB ports correctly in Device Tree such that
it becomes possible to assign them to specific LED triggers (e.g: USB activity).
He does the same thing for BCM53573 and defines default LED triggers for USB.
- Jon provides a fix for Northstar Plus which consists in correctly defining
the "dma-coherent" property for peripherals which are DMA coherent. He also
does a bit of re-arrangement of the USB DT nodes and finally adds USB 3 PHY
and host controller support for NorthStar Plus
- Florian adds support for Broadcom's BCM947189ACDBMR reference board which is
based on BCM47182/53573 and which supports external MoCA (BCM6802)
- Ray fixes the wrong UART2 base address for Cygnus
- Scott moves the v3d node in the proper unit address order and defines the correct
UART alias for the BCM91130_entphn reference board to be UART3
- Jason adds the DT node for the Cygnus Cortex-A9 Performance Monitoring Unit
- Jonathan adds a bunch of additional peripherals to the Cygnus DTS include file:
SDHCI, Keypad, SPI, DMA and pinmux configurations
- Raveendra adds the Cygnus OHCI and EHCI Device Tree nodes
-----BEGIN PGP SIGNATURE-----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=WUr3
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.14/devicetree' of http://github.com/Broadcom/stblinux into next/dt
Pull "Broadcom devicetree changes for 4.14" from Florian Fainelli:
This pull request contains Broadcom ARM-based SoCs Device Tree changes for
4.14, please pull the following:
- Eric moves the bcm2837 DT file from arm64 to arm because it created a maintenance
problem and would have required either duplication or cross merges
- Stefan changes how the pinmuxing is defined and pushes it at the board level
to support Raspberry Pi Zero Wireless. He then adds supports for the actual
Raspberry Pi Zero Wireless board along with binding documentation. Stefan
also defines a proper SMP enable-method property and binding for BCM2836
(Raspbery Pi 2)
- Rafal describes the BCM5301X USB ports correctly in Device Tree such that
it becomes possible to assign them to specific LED triggers (e.g: USB activity).
He does the same thing for BCM53573 and defines default LED triggers for USB.
- Jon provides a fix for Northstar Plus which consists in correctly defining
the "dma-coherent" property for peripherals which are DMA coherent. He also
does a bit of re-arrangement of the USB DT nodes and finally adds USB 3 PHY
and host controller support for NorthStar Plus
- Florian adds support for Broadcom's BCM947189ACDBMR reference board which is
based on BCM47182/53573 and which supports external MoCA (BCM6802)
- Ray fixes the wrong UART2 base address for Cygnus
- Scott moves the v3d node in the proper unit address order and defines the correct
UART alias for the BCM91130_entphn reference board to be UART3
- Jason adds the DT node for the Cygnus Cortex-A9 Performance Monitoring Unit
- Jonathan adds a bunch of additional peripherals to the Cygnus DTS include file:
SDHCI, Keypad, SPI, DMA and pinmux configurations
- Raveendra adds the Cygnus OHCI and EHCI Device Tree nodes
* tag 'arm-soc/for-4.14/devicetree' of http://github.com/Broadcom/stblinux:
ARM: BCM53573: Specify ports for USB LED for Tenda AC9
ARM: dts: cygnus: Add generic-ehci/ohci nodes
ARM: dts: cygnus: add serial0 alias for uart3 on bcm91130_entphn
ARM: dts: cygnus: Add additional peripherals to dtsi
ARM: dts: cygnus: Enable Performance Monitoring Unit
ARM: dts: cygnus: place v3d in proper address ordered location
ARM: dts: cygnus: Fix incorrect UART2 register base
ARM: dts: bcm283x: Add 32-bit enable method for SMP
dt-bindings: arm: add SMP enable-method for BCM2836
ARM: dts: BCM53573: Add Broadcom BCM947189ACDBMR board support
ARM: dts: BCM5301X: Specify USB ports for USB LEDs of few devices
ARM: dts: NSP: Add USB3 and USB3 PHY to NSP
ARM: dts: NSP: Rearrage USB entries
ARM: dts: NSP: Add dma-coherent to relevant DT entries
ARM: dts: bcm2835: Add Raspberry Pi Zero W
dt-bindings: bcm: Add Raspberry Pi Zero W
ARM: bcm283x: Define UART pinmuxing on board level
ARM: dts: BCM5301X: Specify USB ports for each controller
ARM: dts: bcm283x: Move the BCM2837 DT contents from arm64 to arm.
These got delayed a bit because the iodelay changes had to be
reworked for a missing Signed-off-by. And the beagleboard-x15
wants to use iodelay too for mmc:
- A series of changes to add dra7 iodelay data used for mmc
- Add support for new beagleBoard-x15 revision c
- Fix logicpd-torpedo-37xx-devkit mmc card detect direction
-----BEGIN PGP SIGNATURE-----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=R16f
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.14/dt-v3-pt2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt
Pull "device tree changes for omaps for v4.14, part2" from Tony Lindgren:
Second set of device tree changes for omaps for v4.14 merge window.
These got delayed a bit because the iodelay changes had to be
reworked for a missing Signed-off-by. And the beagleboard-x15
wants to use iodelay too for mmc:
- A series of changes to add dra7 iodelay data used for mmc
- Add support for new beagleBoard-x15 revision c
- Fix logicpd-torpedo-37xx-devkit mmc card detect direction
* tag 'omap-for-v4.14/dt-v3-pt2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: omap3: logicpd-torpedo-37xx-devkit: Fix MMC1 cd-gpio
ARM: dts: am57xx-beagle-x15: Add support for rev C
ARM: dts: dra71-evm: Add pinmux configuration for MMC
ARM: dts: dra72-evm-revc: Add pinmux configuration for MMC
ARM: dts: dra72-evm: Add pinmux configuration for MMC
ARM: dts: am572x-idk: Add pinmux configuration for MMC
ARM: dts: am571x-idk: Add pinmux configuration for MMC
ARM: dts: am57xx-idk: Move common MMC/SD properties to common file
ARM: dts: am57xx-beagle-x15: Add pinmux configuration for MMC
ARM: dts: dra7-evm: Add pinmux configuration for MMC
ARM: dts: dra74x: Create a common file with MMC/SD IOdelay data
ARM: dts: dra72x: Create a common file with MMC/SD IOdelay data
The h8homlet board has the A83T's standard USB 1.1/2.0 host pair routed
to a USB host port on the board. The other USB host port is routed to
USB OTG controller.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
The Cubietruck-plus has a GL830 USB-to-SATA bridge connected to EHCI0,
and a USB3503 HSIC USB 2.0 hub connected to EHCI1. The USB3503's I2C
control interface is not connected.
This patch enables both EHCI controllers, adds a device node for the
USB hub, and includes sunxi-common-regulators.dtsi for the VBUS
regulators. The existing reg_vcc3v3 is dropped as it is also available
in the set of common regulators. Other unused regulators are disabled.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
The USB OTG controller found on the A83T is compatible with the one
found on the A33.
Add a device node for it.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
The A83T has 3 USB PHYs, 1 for USB OTG, 1 for standard USB 2.0, 1 for
USB HSIC. EHCI0/OHCI0 are the standard USB host pair, while EHCI1 is
the host controller for HSIC. OTG is not added yet.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Tested-by: Maxime Ripard <maxime.ripard@free-electrons.com>
This uses trigger-sources documented in commit 80dc6e1cd8 ("dt-bindings:
leds: document new trigger-sources property") to specify USB ports. Such an
information can be used by operating system to setup LEDs behavior.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Use serial0 alias to select stdout-path on Cygnus bcm911360_entphon
board.
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Add PMU capability to Cygnus so trace and performance profiling
can be used.
Signed-off-by: Jason Uy <jason.uy@broadcom.com>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
which is needed to move the 32-bit SMP boot code out of the irqchip.
-----BEGIN PGP SIGNATURE-----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=mI2i
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=9MB/
-----END PGP SIGNATURE-----
Merge tag 'bcm2835-dt-next-2017-08-15' into devicetree/next
This pull request brings in a new SMP enable-method compat string,
which is needed to move the 32-bit SMP boot code out of the irqchip.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Fixes commit 687c276761 ("ARM: dts: Add minimal support for LogicPD
Torpedo DM3730 devkit")
This patch corrects an issue where the cd-gpios was improperly setup
using IRQ_TYPE_LEVEL_LOW instead of GPIO_ACTIVE_LOW.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Latest update to the BeagleBoard-X15 platform (revision C). This board contains
a silicon update (Rev 2.0), which includes a fix for the 2nd ethernet phy when
running at 1000 Mbps speeds.
This board can be indentified by the [C.00] after [BBRDX15_] in the at24 eeprom:
[BBRDX15_C.001731PX150249]
Rev C is now in full production and boards are available for end users.
https://beagleboard.org/x15https://github.com/beagleboard/beagleboard-x15/
Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
CC: Tony Lindgren <tony@atomide.com>
CC: Nishanth Menon <nm@ti.com>
CC: Lokesh Vutla <lokeshvutla@ti.com>
CC: Kishon Vijay Abraham I <kishon@ti.com>
CC: Jason Kridner <jkridner@beagleboard.org>
CC: Drew Fustini <drew@beagleboard.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Override the compatible string of the first USB controller to enable
device mode.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Tested-by: Marc Dietrich <marvin24@gmx.de>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Override the compatible string of the first USB controller to enable
device mode.
Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Override the compatible string of the first USB controller to enable
device mode.
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Use newly added R-Car SATA Gen2 fallback compat string
in the DT of the r8a7791 SoC.
This should have no run-time effect as the driver matches against
the per-SoC compat string before the fallback compat string is considered.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Use newly added R-Car SATA Gen2 fallback compat string
in the DT of the r8a7790 SoC.
This should have no run-time effect as the driver matches against
the per-SoC compat string before the fallback compat string is considered.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
- update clock controler for use as reset controller
- misc. updates/fixups/improvements
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=MUvI
-----END PGP SIGNATURE-----
Merge tag 'amlogic-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt
Pull "Amlogic 32-bit DT changes for v4.14" from Kevin Hilman:
- update clock controler for use as reset controller
- misc. updates/fixups/improvements
* tag 'amlogic-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
ARM: dts: meson6: use stable UART bindings
ARM: dts: meson: mark the clock controller also as reset controller
ARM: dts: meson: add a node which describes the SRAM
ARM: dts: meson8b: use the existing wdt node to override the compatible
ARM: dts: meson8: add the PWM controller nodes
ARM: dts: move the pwm_ab and pwm_cd nodes to meson.dtsi
Add needed information inside CPU0 for the generic cpufreq-cpu0 driver.
- clock-latency = 300 us
Approximate worst-case latency to do clock transition for every
OPPs. Using an arbitrary safe value similar to r8a7791(R-Car M2) Soc.
- operating-points = < kHz - uV >
List of 6 operating points. All of them are using the same voltage
since DVS is not supported in RZ/G1 Soc.
Note:This also fixes the below errors seen on kernel logs
[ 0.876877] cpu cpu0: dev_pm_opp_get_opp_count: OPP table not found (-19)
[ 0.883727] cpu cpu1: cpufreq_init: failed to get clk: -2
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add DT nodes for the Advanced Power Management Unit (APMU) and the
second CPU core. Use the enable-method to point out that the APMU
should be used for SMP support.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Document APMU and SMP enable method for RZ/G1M
(also known as r8a7743) SoC.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Document the iW-RainboW-G22D device tree bindings.
It is just a placeholder for the time being, the actual
implementation is not available yet.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Chris Paterson <chris.paterson2@renesas.com>
Reviewed-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Document the iW-RainboW-G22M-SM SODIMM System on Module device tree
bindings. It is just a placeholder for the time being, the actual
implementation is not available yet.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Chris Paterson <chris.paterson2@renesas.com>
Reviewed-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The adv7511 on the Koelsch board has a 12 MHz fixed clock
for the CEC block. Specify this in the dts to enable CEC support.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
