Fucntion msm_qti_pp_send_chmix_cfg_cmd() uses the param_hdr_v3
as the APR header structure for PSPD MtMx set params command.
This structure is the incorrect one which causes ADSP to parse
the PSDP set params payload wrongly and results failure for
non-LPI headset SVA. Use param_hdr_v1 instead to match the
one that ADSP uses to parse the PSPD set params payload.
Change-Id: Icc1d0b50193ab28e33007ca474eeebcb61e4d634
Signed-off-by: Xiaoyu Ye <benyxy@codeaurora.org>
During bootup, hdmi mixer control get functions are called
multiple times and if there is no active hdmi/dp connection,
multiple non-fatal errors messages are logged. These non-fatal
errors messages are triaged as fatal, to avoid this scenario
rate limit the error message.
Change-Id: Ie31382d1758fe3907597adda1eb78aae596a24c4
Signed-off-by: Vignesh Kulothungan <vigneshk@codeaurora.org>
Rouleur has different hph settings for different foundry
id. Read foundry id and update hph settings so as to
provide same settings to end user.
Change-Id: I114047226462ab95e0c93271c3d6099f15af2343
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
Debug logs arguments are not correct in adsp loader
during an error scenario. Correct the arguments to
fix compilation error.
Change-Id: Ibdba5ce1332b287c84a38512fba8764298f4dd80
Avoid swr fifo overflow by checking no. of outstanding
commands in fifo and comparing with fifo depth before
every read/write. If no. of commands is equal to fifo
depth then give some delay and retry. If no of outstanding
commands are still equal to fifo depth then flush fifo
and try writing/reading from fifo again.
Change-Id: Ifd986c7affb70a61f8a90e4960a2779273a7d4d2
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
Add port params for shima and include them
based on sndcard.
Change-Id: I1f71d6db3df5b7d3cf91b0052fdaac51b8bf21d9
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
add machine driver for holi.
compile wsa881x analog driver for holi.
compile wcd937x and wcd938x drivers for holi.
Change-Id: Icba23cc4b1dd40f7dec6f16bb67a6fae26317f80
Signed-off-by: Vangala, Amarnath <avangala@codeaurora.org>
Register to power supply framework to get soc capacity.
Reduce ear and hph gain for reduced voltage to optimize
power consumption. Also set LD22 voltage to lower value
for low SoC.
Change-Id: I94de9341b8c7307128d3cd41c7398c31d57fa685
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
Sometimes during device switch in recording,
observe size 0 is return from DSP due to EOS
handling. For ALSA pcm_read to unblock, buffer
appl_ptr is elapsed without actually updating
the buffer. And userspace copies the stale
data(old buffer) causing issue sometimes.
Reset the buffer for that period_size in
such cases instead of transfer stale data.
Change-Id: I0d3ac133a8d95fad0710586e3e947410a41c9c5a
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Ignore suspend for wsa widgets has been taken care in wsa driver.
Remove unnecessary ignore suspend in machine driver.
Change-Id: I2e6edc19befd3d3e4fd500b2e6b84e07cd3bd729
Signed-off-by: Meng Wang <mengw@codeaurora.org>
Add dapm ignore suspend for playback DAIs to avoid
widget down during suspend.
Change-Id: I64347f9cb9d425096c5710e802805388adecd68f
Signed-off-by: Meng Wang <mengw@codeaurora.org>
Add LPI mode support for VoLTE usecase to register
soundwire inband interrupts during LPI mode.
Change-Id: Id955f211587fac1c2608dcb753f62b0b1f9b60cc
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
Remove disable regulator during system suspend to avoid soundwire
interrupt during system suspend. This change will ensure that
device enter into power collapse during VoLTE usecase in LPI mode.
Change-Id: Ie15d28de9720b83f93ea1a85258b24faadad0db3
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
Add support to use dynamic tdm slots.
The max number of tdm slots is defined in device tree
and tdm configuration is dynamically assigned based on
tdm max slots.
CRs-Fixed: 2553156
Change-Id: If444da44e02e6cbcbb4ea1e2396627745bd1e982
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
As shima has hw conn to get inband interrupt while lpi enabled,
there is no need to register for event listener via afe.
Skip register for event listener for shima.
Change-Id: Ib15ae005a6920d0b2a584a86e896880bda21052e
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
Apply the cached value of device mute setting to dsp,
after voc state moves to RUN.
Change-Id: I82bc9ab2d49a199f0277b1694cd00311eddd6115
Signed-off-by: Vangala, Amarnath <avangala@codeaurora.org>
Update the EAR and LO power up and down sequences to
fix CnP issues in rouleur codec.
Change-Id: I7e6d1cc82e9c1358b336c32b1befb7eb1dd9b552
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
Only load depacketizer module for aptx_adaptive and ldac playback
use-case during dynamic load of BT modules, decoder module loading
not required.
Change-Id: If7ec559f5cc7ff428b8e0e4fac1f34e7f2469c8e
Signed-off-by: Harshal Ahire <hahire@codeaurora.org>
snd_enc_generic structure is used to pass the decoder type
and configuration. Reserved[0] contains the decoder type
and reserve[1] onwards the decoder configuration. Adapt
decoder parsing logic accordingly.
Change-Id: Icc0bf27e026e0144e8356abddf7646a6d34e645c
Signed-off-by: Xiaojun Sang <xsang@codeaurora.org>
