Zhiqiang Liu
7f7ca482a3
ARM: dts: msm: include sa6155 display devicetree
...
Include display devicetree for sa6155.
Change-Id: I3221165dc883bd5731b67dc892a34fd21850f23e
2021-02-26 23:15:31 +05:30
qctecmdr
80f7074923
Merge "ARM: dts: msm: set qupv3 se15 i2c rate to 100khz"
2021-02-25 22:06:52 -08:00
qctecmdr
36306e42f9
Merge "ARM: dts: msm: Add NPU-DDR devfreq nodes to SA8195"
2021-02-25 22:06:52 -08:00
qctecmdr
ad31d5217e
Merge "ARM: dts: msm: Add DT snapshots for pmi632 and pm6125"
2021-02-25 22:06:52 -08:00
qctecmdr
3940190eb6
Merge "ARM: dts: msm: Add virtual spmi device tree node for sa8155"
2021-02-25 22:06:52 -08:00
Wenjun Zhang
fbb224080b
ARM: dts: msm: set qupv3 se15 i2c rate to 100khz
...
Since it was used only for dsi-hdmi bridge chipset,
the chipset could not support higher rate, so set
it to 100khz.
Change-Id: Ieeede3aabb0698270bf0d9eec920c787c11ecf83
2021-02-26 09:39:24 +08:00
qctecmdr
a4d56f1639
Merge "ARM: dts: msm: Update irq type for rtc and usb-id irq"
2021-02-25 11:46:47 -08:00
qctecmdr
3d656a65aa
Merge "ARM: dts: msm: add MHI register space info for PCIe on sdxlemur"
2021-02-25 11:46:47 -08:00
qctecmdr
006c4b702f
Merge "ARM: dts: msm: Update EQU_ADAPTOR_CNTRL3 of SS PHY on holi"
2021-02-25 11:46:47 -08:00
qctecmdr
e6b3c7ea04
Merge "ARM: dts: msm: Add qcom,no-accumulative-counter property for cpufreq"
2021-02-25 11:46:47 -08:00
qctecmdr
c56468adc3
Merge "ARM: dts: msm: STMMAC Add doc for EMAC node"
2021-02-25 11:46:47 -08:00
qctecmdr
8223425c02
Merge "ARM: dts: msm: STMMAC binding"
2021-02-25 11:46:47 -08:00
qctecmdr
7834c33501
Merge "ARM: dts: msm: add PCIe AUX clk freq for sa6155, sa8155, sa8195"
2021-02-25 11:46:46 -08:00
qctecmdr
596495589c
Merge "ARM: dts: msm: Add vreg.sp and gpio.sp resources for lahaina"
2021-02-25 06:25:37 -08:00
qctecmdr
6207abc986
Merge "ARM: dts: msm: add pci DT nodes for PCIe switch for sdxlemur CPE"
2021-02-25 06:25:37 -08:00
qctecmdr
536f50a2ae
Merge "ARM: dts: msm: Add firmware support for SA8195"
2021-02-25 06:25:36 -08:00
qctecmdr
c010cb3b53
Merge "ARM: dts: msm: Add firmware support for SA6150"
2021-02-25 06:25:36 -08:00
qctecmdr
62c92dafde
Merge "ARM: dts: msm: Add PCIE clocks to protected list for YUPIK"
2021-02-25 06:25:35 -08:00
qctecmdr
055e992283
Merge "ARM: dts: msm: Add qseecom node for sa8195 GVM"
2021-02-24 20:57:36 -08:00
qctecmdr
ca48ac804a
Merge "ARM: dts: msm: Enlarge the minidump cma area for SM8150"
2021-02-24 20:57:36 -08:00
qctecmdr
7d430e243d
Merge "ARM: dts: msm: Enable qcom,power-always-on for GPU SMMUs on GKI targets"
2021-02-24 20:57:36 -08:00
qctecmdr
5a9def8b4e
Merge "ARM: dts: qcom: thermal zones definition for thermistors on Lahaina HHG"
2021-02-24 20:57:36 -08:00
qctecmdr
967e163d3d
Merge "ARM: dts: msm: Update S1B and S8B min voltages on yupik"
2021-02-24 20:57:36 -08:00
qctecmdr
ff153a7c2c
Merge "dt-bindings: Add support for GDSC flag to map single GDSCR"
2021-02-24 20:57:36 -08:00
qctecmdr
931ab2d662
Merge "ARM: dts: msm: Enable qseecom on sdxnightjar"
2021-02-24 20:57:36 -08:00
Suraj Jaiswal
386b0191f1
ARM: dts: msm: STMMAC Add doc for EMAC node
...
Add EMAC node documentation.
Change-Id: I38e0f580ac5b50f4dfbe2aeb41815eb142ff1453
2021-02-25 10:23:12 +05:30
Suraj Jaiswal
1421618f47
ARM: dts: msm: STMMAC binding
...
Add support for STMMAC binding doc.
Change-Id: I6292ee23e09f76267465d558799f754d15035064
2021-02-25 10:22:23 +05:30
Ping Jiang
31db9fb573
ARM: dts: msm: Add virtual spmi device tree node for sa8155
...
Add virtual spmi pmic and its dependent device tree node
to support SA8155 for automotive platforms.
Change-Id: I4c4411a4d0cd2331ae62e46aed1ec9e054be4d88
2021-02-24 18:30:42 -08:00
Shreyas K K
c4024465aa
ARM: dts: msm: Add NPU-DDR devfreq nodes to SA8195
...
Add NPU-DDR device tree nodes for devfreq support on
target SA8195.
Change-Id: Ibecfdc9a9b952a0fb520274fc6f3f7ff6ae1a68e
2021-02-25 01:02:37 +05:30
Shreyas K K
98dabe485e
ARM: dts: msm: Add NPU-DDR devfreq nodes to SA8155
...
Add NPU-DDR device tree nodes for devfreq support on
target SA8155.
Change-Id: I95f71ec7bd77dc7935571f96a70fcec030f1ec15
2021-02-25 01:02:26 +05:30
qctecmdr
78257b0d55
Merge "ARM: dts: msm: Fix IPA doorbell address for sdxlemur"
2021-02-24 06:59:32 -08:00
qctecmdr
2647d55a41
Merge "ARM: dts: msm: Enable touch support on lahaina MTP 2.1"
2021-02-24 06:59:32 -08:00
qctecmdr
fa4002a6fa
Merge "ARM: dts: msm: Remove PCIE clocks from protected list for YUPIK IOT"
2021-02-24 06:59:31 -08:00
qctecmdr
5722a8d7c9
Merge "ARM: dts: msm: Add mpm2 sleep counter for sm8150"
2021-02-24 00:44:04 -08:00
qctecmdr
ab09a17225
Merge "ARM: dts: msm: add quat/quin slpi pinctrl info on sm615x platform"
2021-02-24 00:44:04 -08:00
qctecmdr
bd5f987078
Merge "ARM: dts: msm: Update qpic nand bus vote to nominal voltage"
2021-02-24 00:44:03 -08:00
qctecmdr
c56ee0208f
Merge "ARM: dts: msm: Add clock for SLPI pinctrl for SM8150"
2021-02-24 00:19:56 -08:00
qctecmdr
7488393dd1
Merge "ARM: dts: msm: Add firmware support for SM8150"
2021-02-24 00:19:56 -08:00
qctecmdr
d267e9242d
Merge "ARM: dts: msm: Add scm node for msmsteppe"
2021-02-24 00:19:56 -08:00
qctecmdr
e3a08c1bb3
Merge "ARM: dts: msm: Add qcom,usb-charger dt prop on sdxlemur"
2021-02-24 00:19:56 -08:00
qctecmdr
17392f33f1
Merge "ARM: dts: msm: Add virtual subsystem notification nodes for SA8155 VM"
2021-02-24 00:19:56 -08:00
qctecmdr
b202d468c2
Merge "ARM: dts: msm: Add ADSP remoteheap vmlist for SA8155"
2021-02-24 00:19:56 -08:00
qctecmdr
d9d0b0bfee
Merge "ARM: dts: msm: Add device nodes for FastRPC and CDSP Loader for SM6150"
2021-02-24 00:19:56 -08:00
Veera Vegivada
3d2bbea5da
ARM: dts: msm: Add qcom,no-accumulative-counter property for cpufreq
...
Accumulative cycle counters are not supported, cycle counter needs
to be read from the core-0 of the frequency domain.
Add property to indicate the same.
Change-Id: I503c4470824d29ee95a3c39a172ec716be77c61b
2021-02-23 19:04:47 +05:30
katamoni sai abhilash
bfd9346b1a
ARM: dts: msm: Add qseecom node for sa8195 GVM
...
Add dts entry for qseecom node for sa8195
Change-Id: I7c0b7f3581a5f23d7a125413fb76c2be081e1ec9
2021-02-23 14:54:47 +05:30
wadesong
7061f3b8d6
ARM: dts: msm: Enlarge the minidump cma area for SM8150
...
Enlarge the minidump cma area due to a number of new DTSI nodes
(mainly related to CPU cache minidumps) have been added, which
require more space.
Change-Id: I8826f367433c6a26c5f1538166c4edc592996eb3
2021-02-23 14:17:19 +05:30
Kavya Nunna
3a6c635dc4
ARM: dts: msm: Add DT snapshots for pmi632 and pm6125
...
Add snapshot of pmi632 ,pm6125 and pm6125-rpm-regulators
with base nodes for charger, QG, GPIOs, DIV_CLK, flash and
other PMIC peripherals for pmi632 and pm6125.
This snapshot is taken as of msm-4.19 commit c0c998ac0596
("Merge "ARM: dts: msm: Enable diag channels for SDM429/439/QM215"").
Change-Id: I67eea44d89f6e30824d71cd361fd4ffe90cbdec6
2021-02-23 12:17:28 +05:30
Charan Teja Kalla
12db5c3eb3
ARM: dts: msm: Enable qcom,power-always-on for GPU SMMUs on GKI targets
...
When unmapping memory, the SMMU driver must access the GPU SMMU's
register space, so it must vote for power resources to access the TLB
invalidation registers. When the GPU is in slumber, there aren't votes
for the GPU SMMU's power resources, so the SMMU driver constantly ends
up enabling/disabling the power resources, which takes a considerable
amount of time. When paired with the suboptimal IOMMU page table
management code, this leads to performance issues where the time taken
to unmap memory is large.
Thus, for all targets that support GKI, add the qcom,power-always-on
property for the GPU SMMUs of these targets, to remove the latency
incurred by having to enable/disable power resources in the GKI
configuration.
Change-Id: I403c9864705c50f7ce8b1118c3c75902708e647b
2021-02-23 10:40:00 +05:30
Taniya Das
d8c51bb7f3
ARM: dts: msm: Remove PCIE clocks from protected list for YUPIK IOT
...
The PCIE clocks are required to be accessed, thus remove them from the
protected list.
Change-Id: I4800f708fbb2a3502dc46ec7d33427c70391bfb3
2021-02-23 08:43:42 +05:30
Minghao Zhang
555339fcab
ARM: dts: qcom: thermal zones definition for thermistors on Lahaina HHG
...
On Lahaina HHG quiet-therm-usr uses PM8350 AMUX2 channel, qtm-w-therm-usr
uses PM8350 AMUX4 channel and qtm-n-therm-usr uses PM8350 GPIO1 channel.
Meanwhile disable camera-therm-usr, rear-cam-therm-usr and tof-therm-usr
using these channels.
Change-Id: I4bf20074e2c4f8ef815667ff2e8c3e5574522e47
2021-02-23 09:58:46 +08:00
