This patch add boot code. Thx boot params is all in dtb and it's
the only way to let kernel get bootloader param information.
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
This is necessary to avoid compilation issues on non x86 systems (where the
asm/iosf_mbi.h header is not available) and on x86 systems in case IOSF_MBI
support is not enabled there.
Note that the AXP288 PMIC is connected through the LPSS i2c controller, so
either we have IOSF_MBI support selected through the X86_INTEL_LPSS option,
or we have a kernel where the OpRegion will never work anyways.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Now that most of the special Bay- / Cherry-Trail bus lock handling has
been moved to the iosf_mbi code we can simplify the remaining code a bit.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
intel_xpower_pmic_update_power() does a read-modify-write of the output
control register. The i2c-designware code blocks the P-Unit I2C access
during the read and write by taking the P-Unit's PMIC bus semaphore.
But between the read and the write that semaphore is released and the
P-Unit could make changes to the register which we then end up overwriting.
This commit makes intel_xpower_pmic_update_power() take the semaphore
itself so that it is held over the entire read-modify-write, avoiding this
race.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Currently, this driver doesn't support address translation for
non-volatile DIMMs.
The ACPI ADXL DSM method provides address translation for both volatile
and non-volatile DIMMs. Enable it to use the ACPI DSM methods if they
are supported and there are non-volatile DIMMs populated on the system.
Co-developed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
CC: Mauro Carvalho Chehab <mchehab@kernel.org>
CC: arozansk@redhat.com
CC: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1540106336-5212-1-git-send-email-qiuxu.zhuo@intel.com
On some BYT/CHT systems the SoC's P-Unit shares the I2C bus with the
kernel. The P-Unit has a semaphore for the PMIC bus which we can take to
block it from accessing the shared bus while the kernel wants to access it.
Currently we have the I2C-controller driver acquiring and releasing the
semaphore around each I2C transfer. There are 2 problems with this:
1) PMIC accesses often come in the form of a read-modify-write on one of
the PMIC registers, we currently release the P-Unit's PMIC bus semaphore
between the read and the write. If the P-Unit modifies the register during
this window?, then we end up overwriting the P-Unit's changes.
I believe that this is mostly an academic problem, but I'm not sure.
2) To safely access the shared I2C bus, we need to do 3 things:
a) Notify the GPU driver that we are starting a window in which it may not
access the P-Unit, since the P-Unit seems to ignore the semaphore for
explicit power-level requests made by the GPU driver
b) Make a pm_qos request to force all CPU cores out of C6/C7 since entering
C6/C7 while we hold the semaphore hangs the SoC
c) Finally take the P-Unit's PMIC bus semaphore
All 3 these steps together are somewhat expensive, so ideally if we have
a bunch of i2c transfers grouped together we only do this once for the
entire group.
Taking the read-modify-write on a PMIC register as example then ideally we
would only do all 3 steps once at the beginning and undo all 3 steps once
at the end.
For this we need to be able to take the semaphore from within e.g. the PMIC
opregion driver, yet we do not want to remove the taking of the semaphore
from the I2C-controller driver, as that is still necessary to protect many
other code-paths leading to accessing the shared I2C bus.
This means that we first have the PMIC driver acquire the semaphore and
then have the I2C controller driver trying to acquire it again.
To make this possible this commit does the following:
1) Move the semaphore code from being private to the I2C controller driver
into the generic iosf_mbi code, which already has other code to deal with
the shared bus so that it can be accessed outside of the I2C bus driver.
2) Rework the code so that it can be called multiple times nested, while
still blocking I2C accesses while e.g. the GPU driver has indicated the
P-Unit needs the bus through a iosf_mbi_punit_acquire() call.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The function get_loadavg() returns almost always zero. To be more
precise, statistically speaking for a total of 1023379 times passing
in the function, the load is equal to zero 1020728 times, greater than
100, 610 times, the remaining is between 0 and 5.
In 2011, the get_loadavg() was removed from the Android tree because
of the above [1]. At this time, the load was:
unsigned long this_cpu_load(void)
{
struct rq *this = this_rq();
return this->cpu_load[0];
}
In 2014, the code was changed by commit 372ba8cb46 (cpuidle: menu: Lookup CPU
runqueues less) and the load is:
void get_iowait_load(unsigned long *nr_waiters, unsigned long *load)
{
struct rq *rq = this_rq();
*nr_waiters = atomic_read(&rq->nr_iowait);
*load = rq->load.weight;
}
with the same result.
Both measurements show using the load in this code path does no matter
anymore. Removing it.
[1] https://android.googlesource.com/kernel/common/+/4dedd9f124703207895777ac6e91dacde0f7cc17
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The function nr_iowait_cpu() can be used directly by nr_iowait() instead
of duplicating code.
Call nr_iowait_cpu() from nr_iowait()
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This is mostly updates of the usual drivers: UFS, esp_scsi, NCR5380,
qla2xxx, lpfc, libsas, hisi_sas. In addition there's a set of mostly
small updates to the target subsystem a set of conversions to the
generic DMA API, which do have some potential for issues in the older
drivers but we'll handle those as case by case fixes. A new myrs for
the DAC960/mylex raid controllers to replace the block based DAC960
which is also being removed by Jens in this merge window. Plus the
usual slew of trivial changes.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCW9BQJSYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishU3MAP41T8yW
UJQDCprj65pCR+9mOUWzgMvgAW/15ouK89x/7AD/XAEQZqoAgpFUbgnoZWGddZkS
LykIzSiLHP4qeDOh1TQ=
=2JMU
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This is mostly updates of the usual drivers: UFS, esp_scsi, NCR5380,
qla2xxx, lpfc, libsas, hisi_sas.
In addition there's a set of mostly small updates to the target
subsystem a set of conversions to the generic DMA API, which do have
some potential for issues in the older drivers but we'll handle those
as case by case fixes.
A new myrs driver for the DAC960/mylex raid controllers to replace the
block based DAC960 which is also being removed by Jens in this merge
window.
Plus the usual slew of trivial changes"
[ "myrs" stands for "MYlex Raid Scsi". Obviously. Silly of me to even
wonder. There's also a "myrb" driver, where the 'b' stands for
'block'. Truly, somebody has got mad naming skillz. - Linus ]
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (237 commits)
scsi: myrs: Fix the processor absent message in processor_show()
scsi: myrs: Fix a logical vs bitwise bug
scsi: hisi_sas: Fix NULL pointer dereference
scsi: myrs: fix build failure on 32 bit
scsi: fnic: replace gross legacy tag hack with blk-mq hack
scsi: mesh: switch to generic DMA API
scsi: ips: switch to generic DMA API
scsi: smartpqi: fully convert to the generic DMA API
scsi: vmw_pscsi: switch to generic DMA API
scsi: snic: switch to generic DMA API
scsi: qla4xxx: fully convert to the generic DMA API
scsi: qla2xxx: fully convert to the generic DMA API
scsi: qla1280: switch to generic DMA API
scsi: qedi: fully convert to the generic DMA API
scsi: qedf: fully convert to the generic DMA API
scsi: pm8001: switch to generic DMA API
scsi: nsp32: switch to generic DMA API
scsi: mvsas: fully convert to the generic DMA API
scsi: mvumi: switch to generic DMA API
scsi: mpt3sas: switch to generic DMA API
...
-----BEGIN PGP SIGNATURE-----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=58I4
-----END PGP SIGNATURE-----
Merge tag 'pci-v4.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas:
- Fix ASPM link_state teardown on removal (Lukas Wunner)
- Fix misleading _OSC ASPM message (Sinan Kaya)
- Make _OSC optional for PCI (Sinan Kaya)
- Don't initialize ASPM link state when ACPI_FADT_NO_ASPM is set
(Patrick Talbert)
- Remove x86 and arm64 node-local allocation for host bridge structures
(Punit Agrawal)
- Pay attention to device-specific _PXM node values (Jonathan Cameron)
- Support new Immediate Readiness bit (Felipe Balbi)
- Differentiate between pciehp surprise and safe removal (Lukas Wunner)
- Remove unnecessary pciehp includes (Lukas Wunner)
- Drop pciehp hotplug_slot_ops wrappers (Lukas Wunner)
- Tolerate PCIe Slot Presence Detect being hardwired to zero to
workaround broken hardware, e.g., the Wilocity switch/wireless device
(Lukas Wunner)
- Unify pciehp controller & slot structs (Lukas Wunner)
- Constify hotplug_slot_ops (Lukas Wunner)
- Drop hotplug_slot_info (Lukas Wunner)
- Embed hotplug_slot struct into users instead of allocating it
separately (Lukas Wunner)
- Initialize PCIe port service drivers directly instead of relying on
initcall ordering (Keith Busch)
- Restore PCI config state after a slot reset (Keith Busch)
- Save/restore DPC config state along with other PCI config state
(Keith Busch)
- Reference count devices during AER handling to avoid race issue with
concurrent hot removal (Keith Busch)
- If an Upstream Port reports ERR_FATAL, don't try to read the Port's
config space because it is probably unreachable (Keith Busch)
- During error handling, use slot-specific reset instead of secondary
bus reset to avoid link up/down issues on hotplug ports (Keith Busch)
- Restore previous AER/DPC handling that does not remove and
re-enumerate devices on ERR_FATAL (Keith Busch)
- Notify all drivers that may be affected by error recovery resets
(Keith Busch)
- Always generate error recovery uevents, even if a driver doesn't have
error callbacks (Keith Busch)
- Make PCIe link active reporting detection generic (Keith Busch)
- Support D3cold in PCIe hierarchies during system sleep and runtime,
including hotplug and Thunderbolt ports (Mika Westerberg)
- Handle hpmemsize/hpiosize kernel parameters uniformly, whether slots
are empty or occupied (Jon Derrick)
- Remove duplicated include from pci/pcie/err.c and unused variable
from cpqphp (YueHaibing)
- Remove driver pci_cleanup_aer_uncorrect_error_status() calls (Oza
Pawandeep)
- Uninline PCI bus accessors for better ftracing (Keith Busch)
- Remove unused AER Root Port .error_resume method (Keith Busch)
- Use kfifo in AER instead of a local version (Keith Busch)
- Use threaded IRQ in AER bottom half (Keith Busch)
- Use managed resources in AER core (Keith Busch)
- Reuse pcie_port_find_device() for AER injection (Keith Busch)
- Abstract AER interrupt handling to disconnect error injection (Keith
Busch)
- Refactor AER injection callbacks to simplify future improvments
(Keith Busch)
- Remove unused Netronome NFP32xx Device IDs (Jakub Kicinski)
- Use bitmap_zalloc() for dma_alias_mask (Andy Shevchenko)
- Add switch fall-through annotations (Gustavo A. R. Silva)
- Remove unused Switchtec quirk variable (Joshua Abraham)
- Fix pci.c kernel-doc warning (Randy Dunlap)
- Remove trivial PCI wrappers for DMA APIs (Christoph Hellwig)
- Add Intel GPU device IDs to spurious interrupt quirk (Bin Meng)
- Run Switchtec DMA aliasing quirk only on NTB endpoints to avoid
useless dmesg errors (Logan Gunthorpe)
- Update Switchtec NTB documentation (Wesley Yung)
- Remove redundant "default n" from Kconfig (Bartlomiej Zolnierkiewicz)
- Avoid panic when drivers enable MSI/MSI-X twice (Tonghao Zhang)
- Add PCI support for peer-to-peer DMA (Logan Gunthorpe)
- Add sysfs group for PCI peer-to-peer memory statistics (Logan
Gunthorpe)
- Add PCI peer-to-peer DMA scatterlist mapping interface (Logan
Gunthorpe)
- Add PCI configfs/sysfs helpers for use by peer-to-peer users (Logan
Gunthorpe)
- Add PCI peer-to-peer DMA driver writer's documentation (Logan
Gunthorpe)
- Add block layer flag to indicate driver support for PCI peer-to-peer
DMA (Logan Gunthorpe)
- Map Infiniband scatterlists for peer-to-peer DMA if they contain P2P
memory (Logan Gunthorpe)
- Register nvme-pci CMB buffer as PCI peer-to-peer memory (Logan
Gunthorpe)
- Add nvme-pci support for PCI peer-to-peer memory in requests (Logan
Gunthorpe)
- Use PCI peer-to-peer memory in nvme (Stephen Bates, Steve Wise,
Christoph Hellwig, Logan Gunthorpe)
- Cache VF config space size to optimize enumeration of many VFs
(KarimAllah Ahmed)
- Remove unnecessary <linux/pci-ats.h> include (Bjorn Helgaas)
- Fix VMD AERSID quirk Device ID matching (Jon Derrick)
- Fix Cadence PHY handling during probe (Alan Douglas)
- Signal Cadence Endpoint interrupts via AXI region 0 instead of last
region (Alan Douglas)
- Write Cadence Endpoint MSI interrupts with 32 bits of data (Alan
Douglas)
- Remove redundant controller tests for "device_type == pci" (Rob
Herring)
- Document R-Car E3 (R8A77990) bindings (Tho Vu)
- Add device tree support for R-Car r8a7744 (Biju Das)
- Drop unused mvebu PCIe capability code (Thomas Petazzoni)
- Add shared PCI bridge emulation code (Thomas Petazzoni)
- Convert mvebu to use shared PCI bridge emulation (Thomas Petazzoni)
- Add aardvark Root Port emulation (Thomas Petazzoni)
- Support 100MHz/200MHz refclocks for i.MX6 (Lucas Stach)
- Add initial power management for i.MX7 (Leonard Crestez)
- Add PME_Turn_Off support for i.MX7 (Leonard Crestez)
- Fix qcom runtime power management error handling (Bjorn Andersson)
- Update TI dra7xx unaligned access errata workaround for host mode as
well as endpoint mode (Vignesh R)
- Fix kirin section mismatch warning (Nathan Chancellor)
- Remove iproc PAXC slot check to allow VF support (Jitendra Bhivare)
- Quirk Keystone K2G to limit MRRS to 256 (Kishon Vijay Abraham I)
- Update Keystone to use MRRS quirk for host bridge instead of open
coding (Kishon Vijay Abraham I)
- Refactor Keystone link establishment (Kishon Vijay Abraham I)
- Simplify and speed up Keystone link training (Kishon Vijay Abraham I)
- Remove unused Keystone host_init argument (Kishon Vijay Abraham I)
- Merge Keystone driver files into one (Kishon Vijay Abraham I)
- Remove redundant Keystone platform_set_drvdata() (Kishon Vijay
Abraham I)
- Rename Keystone functions for uniformity (Kishon Vijay Abraham I)
- Add Keystone device control module DT binding (Kishon Vijay Abraham
I)
- Use SYSCON API to get Keystone control module device IDs (Kishon
Vijay Abraham I)
- Clean up Keystone PHY handling (Kishon Vijay Abraham I)
- Use runtime PM APIs to enable Keystone clock (Kishon Vijay Abraham I)
- Clean up Keystone config space access checks (Kishon Vijay Abraham I)
- Get Keystone outbound window count from DT (Kishon Vijay Abraham I)
- Clean up Keystone outbound window configuration (Kishon Vijay Abraham
I)
- Clean up Keystone DBI setup (Kishon Vijay Abraham I)
- Clean up Keystone ks_pcie_link_up() (Kishon Vijay Abraham I)
- Fix Keystone IRQ status checking (Kishon Vijay Abraham I)
- Add debug messages for all Keystone errors (Kishon Vijay Abraham I)
- Clean up Keystone includes and macros (Kishon Vijay Abraham I)
- Fix Mediatek unchecked return value from devm_pci_remap_iospace()
(Gustavo A. R. Silva)
- Fix Mediatek endpoint/port matching logic (Honghui Zhang)
- Change Mediatek Root Port Class Code to PCI_CLASS_BRIDGE_PCI (Honghui
Zhang)
- Remove redundant Mediatek PM domain check (Honghui Zhang)
- Convert Mediatek to pci_host_probe() (Honghui Zhang)
- Fix Mediatek MSI enablement (Honghui Zhang)
- Add Mediatek system PM support for MT2712 and MT7622 (Honghui Zhang)
- Add Mediatek loadable module support (Honghui Zhang)
- Detach VMD resources after stopping root bus to prevent orphan
resources (Jon Derrick)
- Convert pcitest build process to that used by other tools (iio, perf,
etc) (Gustavo Pimentel)
* tag 'pci-v4.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (140 commits)
PCI/AER: Refactor error injection fallbacks
PCI/AER: Abstract AER interrupt handling
PCI/AER: Reuse existing pcie_port_find_device() interface
PCI/AER: Use managed resource allocations
PCI: pcie: Remove redundant 'default n' from Kconfig
PCI: aardvark: Implement emulated root PCI bridge config space
PCI: mvebu: Convert to PCI emulated bridge config space
PCI: mvebu: Drop unused PCI express capability code
PCI: Introduce PCI bridge emulated config space common logic
PCI: vmd: Detach resources after stopping root bus
nvmet: Optionally use PCI P2P memory
nvmet: Introduce helper functions to allocate and free request SGLs
nvme-pci: Add support for P2P memory in requests
nvme-pci: Use PCI p2pmem subsystem to manage the CMB
IB/core: Ensure we map P2P memory correctly in rdma_rw_ctx_[init|destroy]()
block: Add PCI P2P flag for request queue
PCI/P2PDMA: Add P2P DMA driver writer's documentation
docs-rst: Add a new directory for PCI documentation
PCI/P2PDMA: Introduce configfs/sysfs enable attribute helpers
PCI/P2PDMA: Add PCI p2pmem DMA mappings to adjust the bus offset
...
Detaching of mark connector from fsnotify_put_mark() can race with
unmounting of the filesystem like:
CPU1 CPU2
fsnotify_put_mark()
spin_lock(&conn->lock);
...
inode = fsnotify_detach_connector_from_object(conn)
spin_unlock(&conn->lock);
generic_shutdown_super()
fsnotify_unmount_inodes()
sees connector detached for inode
-> nothing to do
evict_inode()
barfs on pending inode reference
iput(inode);
Resulting in "Busy inodes after unmount" message and possible kernel
oops. Make fsnotify_unmount_inodes() properly wait for outstanding inode
references from detached connectors.
Note that the accounting of outstanding inode references in the
superblock can cause some cacheline contention on the counter. OTOH it
happens only during deletion of the last notification mark from an inode
(or during unlinking of watched inode) and that is not too bad. I have
measured time to create & delete inotify watch 100000 times from 64
processes in parallel (each process having its own inotify group and its
own file on a shared superblock) on a 64 CPU machine. Average and
standard deviation of 15 runs look like:
Avg Stddev
Vanilla 9.817400 0.276165
Fixed 9.710467 0.228294
So there's no statistically significant difference.
Fixes: 6b3f05d24d ("fsnotify: Detach mark from object list when last reference is dropped")
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Change this time round are:
- Support for ColdFire mcf5441x edma controller
- Support for link list mode in sprd dma
- More users of managed dmaenginem_async_device_register API
- Cyclic mode support in owl dma driver
- DT updates for renesas drivers, dma-jz4780 updates and support for
JZ4770, JZ4740 and JZ4725B controllers
- Removal of deprecated dma_slave_config direction in dmaengine drivers,
few more users will be removed in next cycle and eventually users.
- Minor updates to idma64, ioat, pxa, ppc drivers
-----BEGIN PGP SIGNATURE-----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=/pTg
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-4.20-rc1' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine updates from Vinod Koul:
- Support for ColdFire mcf5441x edma controller
- Support for link list mode in sprd dma
- More users of managed dmaenginem_async_device_register API
- Cyclic mode support in owl dma driver
- DT updates for renesas drivers, dma-jz4780 updates and support for
JZ4770, JZ4740 and JZ4725B controllers
- Removal of deprecated dma_slave_config direction in dmaengine
drivers, few more users will be removed in next cycle and eventually
removed.
- Minor updates to idma64, ioat, pxa, ppc drivers
* tag 'dmaengine-4.20-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (66 commits)
dmaengine: ppc4xx: fix off-by-one build failure
dmaengine: owl: Fix warnings generated during build
dmaengine: fsl-edma: remove dma_slave_config direction usage
dmaengine: rcar-dmac: set scatter/gather max segment size
dmaengine: mmp_tdma: remove dma_slave_config direction usage
dmaengine: ep93xx_dma: remove dma_slave_config direction usage
dmaengine: k3dma: remove dma_slave_config direction usage
dmaengine: k3dma: dont use direction for memcpy
dmaengine: imx-dma: remove dma_slave_config direction usage
dmaengine: idma: remove dma_slave_config direction usage
dmaengine: hsu: remove dma_slave_config direction usage
dmaengine: dw: remove dma_slave_config direction usage
dmaengine: jz4740: remove dma_slave_config direction usage
dmaengine: coh901318: remove dma_slave_config direction usage
dmaengine: bcm2835: remove dma_slave_config direction usage
dmaengine: at_hdmac: remove dma_slave_config direction usage
dmaengine: owl: Add Slave and Cyclic mode support for Actions Semi Owl S900 SoC
dmaengine: ioat: fix prototype of ioat_enumerate_channels
dmaengine: stm32-dma: check whether length is aligned on FIFO threshold
dt-bindings: dmaengine: usb-dmac: Add binding for r8a7744
...
Hygon Dhyana support (Pu Wen)
- sb_edac: New maintainer + fixes (Tony Luck)
Error reporting improvements and fixes (Qiuxu Zhuo)
- ghes_edac: SMBIOS handle type 17 for DIMM locating and per-DIMM error
accounting (Fan Wu)
- altera_edac: Stratix10 support and refactoring (Thor Thayer)
Out of tree addition:
- acpi_adxl: Address Translation interface using an ACPI DSM (Tony Luck)
- the usual amount of other misc fixes and cleanups all over.
-----BEGIN PGP SIGNATURE-----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=HEJK
-----END PGP SIGNATURE-----
Merge tag 'edac_for_4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp
Pull EDAC updates from Borislav Petkov:
"The EDAC tree was busier than usual this cycle as the shortlog below
shows.
Also, this pull request is carrying an ACPI DSM driver which is used
to ask the platform to supply the DIMM location of a reported hardware
error and thus simplify all the EDAC logic when trying to map the
error address to the respective DIMM.
Core EDAC updates:
- amd64_edac: AMD family 0x17, models 0x10-0x2f support (Michael Jin)
Hygon Dhyana support (Pu Wen)
- sb_edac: New maintainer + fixes (Tony Luck) Error reporting
improvements and fixes (Qiuxu Zhuo)
- ghes_edac: SMBIOS handle type 17 for DIMM locating and per-DIMM
error accounting (Fan Wu)
- altera_edac: Stratix10 support and refactoring (Thor Thayer)
Out of tree addition:
- acpi_adxl: Address Translation interface using an ACPI DSM (Tony
Luck)
- the usual amount of other misc fixes and cleanups all over"
* tag 'edac_for_4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: (22 commits)
ACPI/ADXL: Add address translation interface using an ACPI DSM
EDAC, thunderx: Fix memory leak in thunderx_l2c_threaded_isr()
EDAC, skx_edac: Fix logical channel intermediate decoding
EDAC, {i7core,sb,skx}_edac: Fix uncorrected error counting
EDAC, altera: Work around int-to-pointer-cast warnings
EDAC, amd64: Add Hygon Dhyana support
EDAC: Raise the maximum number of memory controllers
arm64: dts: stratix10: Add peripheral EDAC nodes
EDAC, altera: Add Stratix10 peripheral support
EDAC, altera: Merge Stratix10 into the Arria10 SDRAM probe routine
arm64: dts: stratix10: Add SDRAM node
EDAC, altera: Combine Stratix10 and Arria10 probe functions
arm64: dts: stratix10: Additions to EDAC System Manager
EDAC, i7core: Remove set but not used variable pvt
EDAC, ghes: Use CPER module handles to locate DIMMs
EDAC: Correct DIMM capacity unit symbol
EDAC, sb_edac: Fix signedness bugs in *_get_ha() functions
EDAC, sb_edac: Fix reporting for patrol scrubber errors
EDAC, sb_edac: Return early on ADDRV bit and address type test
MAINTAINERS: Update maintainer for drivers/edac/sb_edac.c
...
* Improve the efficiency and performance of reading nvdimm-namespace
labels. Reduce the amount of label data read at driver load time by a
few orders of magnitude. Reduce heavyweight call-outs to
platform-firmware routines.
* Handle media errors located in the 'struct page' array stored on a
persistent memory namespace. Let the kernel clear these errors rather
than an awkward userspace workaround.
* Fix Address Range Scrub (ARS) completion tracking. Correct occasions
where the kernel indicates completion of ARS before submission.
* Fix asynchronous device registration reference counting.
* Add support for reporting an nvdimm dirty-shutdown-count via sysfs.
* Fix various small libnvdimm core and uapi issues.
-----BEGIN PGP SIGNATURE-----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=0FtE
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Dan Williams:
- Improve the efficiency and performance of reading nvdimm-namespace
labels. Reduce the amount of label data read at driver load time by a
few orders of magnitude. Reduce heavyweight call-outs to
platform-firmware routines.
- Handle media errors located in the 'struct page' array stored on a
persistent memory namespace. Let the kernel clear these errors rather
than an awkward userspace workaround.
- Fix Address Range Scrub (ARS) completion tracking. Correct occasions
where the kernel indicates completion of ARS before submission.
- Fix asynchronous device registration reference counting.
- Add support for reporting an nvdimm dirty-shutdown-count via sysfs.
- Fix various small libnvdimm core and uapi issues.
* tag 'libnvdimm-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (21 commits)
acpi, nfit: Further restrict userspace ARS start requests
acpi, nfit: Fix Address Range Scrub completion tracking
UAPI: ndctl: Remove use of PAGE_SIZE
UAPI: ndctl: Fix g++-unsupported initialisation in headers
tools/testing/nvdimm: Populate dirty shutdown data
acpi, nfit: Collect shutdown status
acpi, nfit: Introduce nfit_mem flags
libnvdimm, label: Fix sparse warning
nvdimm: Use namespace index data to reduce number of label reads needed
nvdimm: Split label init out from the logic for getting config data
nvdimm: Remove empty if statement
nvdimm: Clarify comment in sizeof_namespace_index
nvdimm: Sanity check labeloff
libnvdimm, dimm: Maximize label transfer size
libnvdimm, pmem: Fix badblocks population for 'raw' namespaces
libnvdimm, namespace: Drop the repeat assignment for variable dev->parent
libnvdimm, region: Fail badblocks listing for inactive regions
libnvdimm, pfn: during init, clear errors in the metadata area
libnvdimm: Set device node in nd_device_register
libnvdimm: Hold reference on parent while scheduling async init
...
* Add Spreadtrum SC2731 charger driver
* bq25890-charger: Add BQ25896 support
* bq27xxx-battery: Add support for BQ27411
* qcom-pon: Add pms405 pon support
* cros-charger: add support for dedicated port
* misc. fixes
-----BEGIN PGP SIGNATURE-----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=sAkr
-----END PGP SIGNATURE-----
Merge tag 'for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
- Add Spreadtrum SC2731 charger driver
- bq25890-charger: Add BQ25896 support
- bq27xxx-battery: Add support for BQ27411
- qcom-pon: Add pms405 pon support
- cros-charger: add support for dedicated port
- misc fixes
* tag 'for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (28 commits)
power: max8925: mark expected switch fall-through
power: supply: fix spelling mistake "Gauage" -> "Gauge"
power: reset: qcom-pon: Add pms405 pon support
power: supply: bq27xxx: Add support for BQ27411
power: supply: Add Spreadtrum SC2731 charger support
dt-bindings: power: Add Spreadtrum SC2731 charger documentation
power: supply: twl4030_charger: disable eoc interrupt on linear charge
power: supply: twl4030_charger: fix charging current out-of-bounds
power: supply: bq25890_charger: fix semicolon.cocci warnings
power: supply: max8998-charger: Fix platform data retrieval
power: supply: cros: add support for dedicated port
mfd: cros: add charger port count command definition
power: reset: at91-poweroff: do not procede if at91_shdwc is allocated
power: reset: at91-poweroff: rename at91_shdwc_base member of struct shdwc
power: reset: at91-poweroff: make sclk part of struct shdwc
power: reset: at91-poweroff: make mpddrc_base part of struct shdwc
power: reset: at91-poweroff: use only one poweroff function
power: reset: at91-poweroff: switch to slow clock before shutdown
power: reset: convert to SPDX identifiers
power: supply: ab8500_fg: silence uninitialized variable warnings
...
Pull HID updates from Jiri Kosina:
- rumble support for Xbox One S, from Andrey Smirnov
- high-resolution support for Logitech mice, from Harry Cutts
- support for recent devices requiring the HID parse to be able to cope
with tag report sizes > 256
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (35 commits)
HID: usbhid: Add quirk for Redragon/Dragonrise Seymur 2
HID: wacom: Work around HID descriptor bug in DTK-2451 and DTH-2452
HID: google: add dependency on Cros EC for Hammer
HID: elan: fix spelling mistake "registred" -> "registered"
HID: google: drop superfluous const before SIMPLE_DEV_PM_OPS()
HID: google: add support tablet mode switch for Whiskers
mfd: cros: add "base attached" MKBP switch definition
Input: reserve 2 events code because of HID
HID: magicmouse: add support for Apple Magic Trackpad 2
HID: i2c-hid: override HID descriptors for certain devices
HID: hid-bigbenff: driver for BigBen Interactive PS3OFMINIPAD gamepad
HID: logitech: fix a used uninitialized GCC warning
HID: intel-ish-hid: using list_head for ipc write queue
HID: intel-ish-hid: use resource-managed api
HID: intel_ish-hid: Enhance API to get ring buffer sizes
HID: intel-ish-hid: use helper function to search client id
HID: intel-ish-hid: ishtp: add helper function for client search
HID: intel-ish-hid: use helper function to access client buffer
HID: intel-ish-hid: ishtp: add helper functions for client buffer operation
HID: intel-ish-hid: use helper function for private driver data set/get
...
MOVDIR64B moves 64-bytes as direct-store with 64-bytes write atomicity.
Direct store is implemented by using write combining (WC) for writing
data directly into memory without caching the data.
In low latency offload (e.g. Non-Volatile Memory, etc), MOVDIR64B writes
work descriptors (and data in some cases) to device-hosted work-queues
atomically without cache pollution.
Availability of the MOVDIR64B instruction is indicated by the
presence of the CPUID feature flag MOVDIR64B (CPUID.0x07.0x0:ECX[bit 28]).
Please check the latest Intel Architecture Instruction Set Extensions
and Future Features Programming Reference for more details on the CPUID
feature MOVDIR64B flag.
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi V Shankar <ravi.v.shankar@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1540418237-125817-3-git-send-email-fenghua.yu@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
MOVDIRI moves doubleword or quadword from register to memory through
direct store which is implemented by using write combining (WC) for
writing data directly into memory without caching the data.
Programmable agents can handle streaming offload (e.g. high speed packet
processing in network). Hardware implements a doorbell (tail pointer)
register that is updated by software when adding new work-elements to
the streaming offload work-queue.
MOVDIRI can be used as the doorbell write which is a 4-byte or 8-byte
uncachable write to MMIO. MOVDIRI has lower overhead than other ways
to write the doorbell.
Availability of the MOVDIRI instruction is indicated by the presence of
the CPUID feature flag MOVDIRI(CPUID.0x07.0x0:ECX[bit 27]).
Please check the latest Intel Architecture Instruction Set Extensions
and Future Features Programming Reference for more details on the CPUID
feature MOVDIRI flag.
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi V Shankar <ravi.v.shankar@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1540418237-125817-2-git-send-email-fenghua.yu@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The file drivers/vhost/vsock.h never existed. Remove the bogus
MAINTAINERS reference.
Fixes: 433fc58e6b ("VSOCK: Introduce vhost_vsock.ko")
Reported-by: Joe Perches <joe@perches.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Change the request queue handler to use common handling routines same
as the control queue handler.
Signed-off-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Prepare to change the request queue handler to use common handling
routines.
Signed-off-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The vhost-scsi driver currently does not handle any control queue
operations. In particular, vhost_scsi_ctl_handle_kick, merely prints out
a debug message but does nothing else. This can cause guest VMs to hang.
As part of SCSI recovery from an error, e.g., an I/O timeout, the SCSI
midlayer attempts to abort the failed operation. The SCSI virtio driver
translates the abort to a SCSI TMF request that gets put on the control
queue (virtscsi_abort -> virtscsi_tmf). The SCSI virtio driver then
waits indefinitely for this request to be completed, but it never will
because vhost-scsi never responds to that request.
To avoid a hang, always respond to control queue operations; explicitly
reject TMF requests, and return a no-op response to event requests.
Signed-off-by: Bijan Mottahedeh <bijan.mottahedeh@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commands with protection information included were not truncating the
protection iov_iter to the number of protection bytes in the command.
This resulted in vhost_scsi mis-calculating the size of the protection
SGL in vhost_scsi_calc_sgls(), and including both the protection and
data SG entries in the protection SGL.
Fixes: 09b13fa8c1 ("vhost/scsi: Add ANY_LAYOUT support in vhost_scsi_handle_vq")
Signed-off-by: Greg Edwards <gedwards@ddn.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fixes: 09b13fa8c1
Cc: stable@vger.kernel.org
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
[Why]
Carrizo and Stoney have severe corruption when trying to power
4k 60 monitors over HDMI connectors that support 4k 60.
Carrizo and Stoney require retimers and redrivers to support 4k 60
over HDMI. This driver does not currently support these. Thus, 4k 60
HDMI (and all other modes requiring over 300MHz) should be disabled.
[How]
Reduce the dce11 HDMI pixel clock cap to 300000kHz.
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
need to check adev->powerplay.pp_funcs first, becasue from
AI, the smu ip can be disabled by user, and the pp_handle
is null in this case.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
from AI, SMU Ip is not indispensable to driver and can be
disabled by user via module parameter ip_block_mask.
so the pp_handle may be NULL.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This can suppress the error reported on driver loading. Also these
are empty APIs as Vega12/Vega20 has no performance levels.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The VIRTIO_BALLOON_F_PAGE_POISON feature bit is used to indicate if the
guest is using page poisoning. Guest writes to the poison_val config
field to tell host about the page poisoning value that is in use.
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In some usages, e.g. virtio-balloon, a kernel module needs to know if
page poisoning is in use. This patch exposes the page_poisoning_enabled
function to kernel modules.
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Negotiation of the VIRTIO_BALLOON_F_FREE_PAGE_HINT feature indicates the
support of reporting hints of guest free pages to host via virtio-balloon.
Currenlty, only free page blocks of MAX_ORDER - 1 are reported. They are
obtained one by one from the mm free list via the regular allocation
function.
Host requests the guest to report free page hints by sending a new cmd id
to the guest via the free_page_report_cmd_id configuration register. When
the guest starts to report, it first sends a start cmd to host via the
free page vq, which acks to host the cmd id received. When the guest
finishes reporting free pages, a stop cmd is sent to host via the vq.
Host may also send a stop cmd id to the guest to stop the reporting.
VIRTIO_BALLOON_CMD_ID_STOP: Host sends this cmd to stop the guest
reporting.
VIRTIO_BALLOON_CMD_ID_DONE: Host sends this cmd to tell the guest that
the reported pages are ready to be freed.
Why does the guest free the reported pages when host tells it is ready to
free?
This is because freeing pages appears to be expensive for live migration.
free_pages() dirties memory very quickly and makes the live migraion not
converge in some cases. So it is good to delay the free_page operation
when the migration is done, and host sends a command to guest about that.
Why do we need the new VIRTIO_BALLOON_CMD_ID_DONE, instead of reusing
VIRTIO_BALLOON_CMD_ID_STOP?
This is because live migration is usually done in several rounds. At the
end of each round, host needs to send a VIRTIO_BALLOON_CMD_ID_STOP cmd to
the guest to stop (or say pause) the reporting. The guest resumes the
reporting when it receives a new command id at the beginning of the next
round. So we need a new cmd id to distinguish between "stop reporting" and
"ready to free the reported pages".
TODO:
- Add a batch page allocation API to amortize the allocation overhead.
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Signed-off-by: Liang Li <liang.z.li@intel.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Make sure that make kvmconfig enables all the virtio drivers even if it is
preceded by a make allnoconfig.
Signed-off-by: Lénaïc Huard <lenaic@lhuard.fr>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When registering one RTC device, it will check to see if there is an
alarm already set in RTC hardware by reading RTC alarm, at this time
we should always read the normal alarm put in always-on region by
checking the rtc->registered flag.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The RTC interrupt enable register is not put in always-power-on region
supplied by VDDRTC, so we should check if we need enable the alarm
interrupt when system booting.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
When registering one rtc device, it will check to see if there is an
alarm already set in rtc hardware by issuing __rtc_read_alarm(). So
we should not disable the RTC interrupts and clear the interrupts
status in probe() function.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
We should clear the SPG value update interrupt status once the SPG value
is updated successfully, in case incorrect status validation for next time.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Set wakeup capability before registering rtc device, in case the alarmtimer
can find one available rtc device.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Jeff Kirsher says:
====================
Intel Wired LAN Driver Fixes 2018-10-24
This series contains fixes for the ice driver.
Anirudh fixes a namespace issue which was introduced with a previous
patch to remove ice_netpoll. Fixed up the device ID define names to
align with the branding string names. Use the capability count returned
by the firmware, instead of calculating the count. Introduced driver
workarounds due to current firmware limitations. Fixed the queue
mapping for a VF, which needs to be set in the config and scatter queue
modes. Fixed the driver which is setup to handle link status events
(LSE), even though the firmware does not have this feature yet, so add
the ability to poll for link status changes while we wait for updated
firmware.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The intent of ip6_route_check_nh_onlink is to make sure the gateway
given for an onlink route is not actually on a connected route for
a different interface (e.g., 2001:db8:1::/64 is on dev eth1 and then
an onlink route has a via 2001:db8:1::1 dev eth2). If the gateway
lookup hits the default route then it most likely will be a different
interface than the onlink route which is ok.
Update ip6_route_check_nh_onlink to disregard the device mismatch
if the gateway lookup hits the default route. Turns out the existing
onlink tests are passing because there is no default route or it is
an unreachable default, so update the onlink tests to have a default
route other than unreachable.
Fixes: fc1e64e109 ("net/ipv6: Add support for onlink flag")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Marco reported an error with hfsc:
root@Calimero:~# tc qdisc add dev eth0 root handle 1:0 hfsc default 1
Error: Attribute failed policy validation.
Apparently a few implementations pass TCA_OPTIONS as a binary instead
of nested attribute, so drop TCA_OPTIONS from the policy.
Fixes: 8b4c3cdd9d ("net: sched: Add policy validation for tc attributes")
Reported-by: Marco Berizzi <pupilla@libero.it>
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the physical link goes up or down, the driver is supposed to
receive a link status event (LSE). The driver currently has the code
to handle LSEs but there is no firmware support for this feature yet.
So this patch adds the ability for the driver to poll for link status
changes. The polling itself is done in ice_watchdog_subtask.
For namespace cleanliness, this patch also removes code that handles
LSE. This code will be reintroduced once the feature is officially
supported.
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Allocate VF interrupts using VPINT_ALLOC_PCI. Multiple interrupts are
specified as a range from "first" to "last".
Also, according to the spec, the queue mapping for a VF needs to be set
in both contig and scatter queue modes. So make this change as well.
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
ice_dev_onetime_setup contains a couple of driver workarounds for current
firmware limitations. These workarounds are expected to go away once
these limitations are fixed in the firmware.
On a firmware release that has these issues addressed, these workarounds
(while unnecessary) will not break anything.
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
This patch fixes the smatch warning,
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_err.c:700
hclge_log_and_clear_ppp_error() error: uninitialized symbol
'hw_err_lst3'
Link: https://lkml.org/lkml/2018/10/23/430
Fixes: da2d072a9e ("net: hns3: Add enable and process hw errors from PPP")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
