This is a copy and paste bug where we copied the sizeof() from the chunk
before. We're copying more data than intended but the destination is a
union so it doesn't cause memory corruption.
Fixes: ffb0abd7e9 ("octeontx2-af: NIX AQ instruction enqueue support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Current handling of CHECKSUM_COMPLETE packets by the UDP stack is
incorrect for any packet that has an incorrect checksum value.
udp4/6_csum_init() will both make a call to
__skb_checksum_validate_complete() to initialize/validate the csum
field when receiving a CHECKSUM_COMPLETE packet. When this packet
fails validation, skb->csum will be overwritten with the pseudoheader
checksum so the packet can be fully validated by software, but the
skb->ip_summed value will be left as CHECKSUM_COMPLETE so that way
the stack can later warn the user about their hardware spewing bad
checksums. Unfortunately, leaving the SKB in this state can cause
problems later on in the checksum calculation.
Since the the packet is still marked as CHECKSUM_COMPLETE,
udp_csum_pull_header() will SUBTRACT the checksum of the UDP header
from skb->csum instead of adding it, leaving us with a garbage value
in that field. Once we try to copy the packet to userspace in the
udp4/6_recvmsg(), we'll make a call to skb_copy_and_csum_datagram_msg()
to checksum the packet data and add it in the garbage skb->csum value
to perform our final validation check.
Since the value we're validating is not the proper checksum, it's possible
that the folded value could come out to 0, causing us not to drop the
packet. Instead, we believe that the packet was checksummed incorrectly
by hardware since skb->ip_summed is still CHECKSUM_COMPLETE, and we attempt
to warn the user with netdev_rx_csum_fault(skb->dev);
Unfortunately, since this is the UDP path, skb->dev has been overwritten
by skb->dev_scratch and is no longer a valid pointer, so we end up
reading invalid memory.
This patch addresses this problem in two ways:
1) Do not use the dev pointer when calling netdev_rx_csum_fault()
from skb_copy_and_csum_datagram_msg(). Since this gets called
from the UDP path where skb->dev has been overwritten, we have
no way of knowing if the pointer is still valid. Also for the
sake of consistency with the other uses of
netdev_rx_csum_fault(), don't attempt to call it if the
packet was checksummed by software.
2) Add better CHECKSUM_COMPLETE handling to udp4/6_csum_init().
If we receive a packet that's CHECKSUM_COMPLETE that fails
verification (i.e. skb->csum_valid == 0), check who performed
the calculation. It's possible that the checksum was done in
software by the network stack earlier (such as Netfilter's
CONNTRACK module), and if that says the checksum is bad,
we can drop the packet immediately instead of waiting until
we try and copy it to userspace. Otherwise, we need to
mark the SKB as CHECKSUM_NONE, since the skb->csum field
no longer contains the full packet checksum after the
call to __skb_checksum_validate_complete().
Fixes: e6afc8ace6 ("udp: remove headers from UDP packets before queueing")
Fixes: c84d949057 ("udp: copy skb->truesize in the first cache line")
Cc: Sam Kumar <samanthakumar@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Sean Tranchetti <stranche@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Ahern says:
====================
net: Fixups for recent dump filtering changes
Li RongQing noted that tgt_net is leaked in ipv4 due to the recent change
to handle address dumps for a specific device. The report also applies to
ipv6 and other error paths. Patches 1 and 2 fix those leaks.
Patch 3 stops route dumps from erroring out when dumping across address
families and a table id is given. This is needed in preparation for
patch 4.
Patch 4 updates the rtnl_dump_all to handle a failure in one of the dumpit
functions. At the moment, if an address dump returns an error the dump all
loop breaks but the error is dropped. The result can be no data is returned
and no error either leaving the user wondering about the addresses.
Patches were tested with a modified iproute2 to add invalid data to the
dump request causing each specific failure path to be hit in addition
to positive testing that it works as it should when given valid data.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
If an address, route or netconf dump request is sent for AF_UNSPEC, then
rtnl_dump_all is used to do the dump across all address families. If one
of the dumpit functions fails (e.g., invalid attributes in the dump
request) then rtnl_dump_all needs to propagate that error so the user
gets an appropriate response instead of just getting no data.
Fixes: effe679266 ("net: Enable kernel side filtering of route dumps")
Fixes: 5fcd266a9f ("net/ipv4: Add support for dumping addresses for a specific device")
Fixes: 6371a71f3a ("net/ipv6: Add support for dumping addresses for a specific device")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When doing a route dump across all address families, do not error out
if the table does not exist. This allows a route dump for AF_UNSPEC
with a table id that may only exist for some of the families.
Do return the table does not exist error if dumping routes for a
specific family and the table does not exist.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If tgt_net is set based on IFA_TARGET_NETNSID attribute in the dump
request, make sure all error paths call put_net.
Fixes: 6371a71f3a ("net/ipv6: Add support for dumping addresses for a specific device")
Fixes: ed6eff1179 ("net/ipv6: Update inet6_dump_addr for strict data checking")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If tgt_net is set based on IFA_TARGET_NETNSID attribute in the dump
request, make sure all error paths call put_net.
Fixes: 5fcd266a9f ("net/ipv4: Add support for dumping addresses for a specific device")
Fixes: c33078e3df ("net/ipv4: Update inet_dump_ifaddr for strict data checking")
Reported-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The firmware now returns the capability count in the command buffer.
Use it.
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Update to the current firmware major and minor version which are
1 and 3 respectively.
Also remove an empty comment line.
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Basically remove references to C810 and use E810C (from the branding
string) instead.
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Strip escape sequences from the stream to the ftracetest
summary log file. Note that all test-case results are
dumped raw in each file.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
If test is being directly executed (with stdout opened on the
terminal) and the terminal capabilities indicate enough
colors, then use the existing scheme of green, red, and blue
to show when tests pass, fail or end in a different way.
When running the tests redirecting the stdout, for instance,
to a file, then colors are not shown, thus producing a more
readable output.
Signed-off-by: Daniel Díaz <daniel.diaz@linaro.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Fixes the following warnings:
dirty_log_test.c: In function ‘help’:
dirty_log_test.c:216:9: warning: format ‘%lu’ expects argument of type ‘long unsigned int’, but argument 2 has type ‘int’ [-Wformat=]
printf(" -i: specify iteration counts (default: %"PRIu64")\n",
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from include/test_util.h:18:0,
from dirty_log_test.c:16:
/usr/include/inttypes.h:105:34: note: format string is defined here
# define PRIu64 __PRI64_PREFIX "u"
dirty_log_test.c:218:9: warning: format ‘%lu’ expects argument of type ‘long unsigned int’, but argument 2 has type ‘int’ [-Wformat=]
printf(" -I: specify interval in ms (default: %"PRIu64" ms)\n",
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from include/test_util.h:18:0,
from dirty_log_test.c:16:
/usr/include/inttypes.h:105:34: note: format string is defined here
# define PRIu64 __PRI64_PREFIX "u"
Signed-off-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Now that ftracetest has over 80 tests, it is difficult to simply scroll
up the console window to find the failed tests when it reports just two
tests have failed. In order to make this stand out better, have the
color of the word "PASS" be green, "FAIL" and "XFAIL" be red, and all
other results be blue. This helps tremendously in quickly spotting the
failed tests by just scrolling up the console window.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Trivial fix to spelling mistake in TEST_ASSERT message text
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
When simply running `make' from the selftests top dir, this
error shows up:
cc -O2 -g -std=gnu99 -Wall -I../../../../usr/include/ -I/usr/include/libmount -I/usr/include/blkid -I/usr/include/uuid gpio-mockup-chardev.c ../../../gpio/gpio-utils.o -lmount -o gpio-mockup-chardev
cc: error: ../../../gpio/gpio-utils.o: No such file or directory
<builtin>: recipe for target 'gpio-mockup-chardev' failed
make[1]: *** [gpio-mockup-chardev] Error 1
because the output directory is set to "selftests/gpio" and
all binaries built from ../../../gpio/ end up there. In fact,
they appear as, exempli gratia:
* gpiogpio-event-mon
* gpiogpio-hammer
* gpioinclude/
* gpiolsgpio
which is wrong, as it's missing a directory separator
somewhere.
This patch sets straight the output directory when building
../../../gpio/ so that binaries don't cross paths.
Signed-off-by: Daniel Díaz <daniel.diaz@linaro.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
This patch cleans up the Makefile by restructuring a couple of
things, namely:
1) change explicit paths in targets for variables
2) substitute a variable (BINARIES) for another, part of the
selftests build system (TEST_PROGS_EXTENDED)
3) proper cleaning up of the EXTRA objects
The resulting Makefile is much more readable and manageable.
Signed-off-by: Fathi Boudra <fathi.boudra@linaro.org>
Signed-off-by: Daniel Díaz <daniel.diaz@linaro.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
When ioctls for WDIOC_SETOPTIONS (WDIOS_DISABLECARD or WDIOS_ENABLECARD),
WDIOC_SETTIMEOUT, and WDIOC_SETPRETIMEOUT fail, the error path continues
to handler watchdog timer until user terminates it. When ioctl returns
error, it might not be safe to let the watchdog tick. The error could be
due an unsupported ioctl command or some other error.
Fix it to handle error paths as oneshot to stop the watchdog ticks and
exit right away.
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Printf's say errno but print the string version of error.
Make consistent.
Signed-off-by: Jerry Hoemann <jerry.hoemann@hpe.com>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
When /dev/watchdog open fails, watchdog exits with "watchdog not enabled"
message. This is incorrect when open fails due to insufficient privilege.
Fix message to clearly state the reason when open fails with EACCESS when
a non-root user runs it.
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Add a testcase for tracing_cpumask with function tracer.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Add a test case for stacktrace filter command for ftrace.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Add a simple testcase for trace_pipe which can consume
ringbuffer.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Add a testcase for function filter on module.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Add a testcase for max stack tracer, which checks basic
max stack usage tracing and its filter feature.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Add a testcase for function profiling per-cpu statistics
interface. There is already func_profile.tc, but that is
mainly focusing on the combination of function-profiler
and function tracer. This testcase ensures trace_stat
per-cpu function statistics is correctly updated.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Add a testcase for changing ringbuffer size. This tests
not only ringbuffer size but also tests the imbalance
per-cpu buffer size change too.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Add a testcase for kprobe-event with @symbol argument.
Since @symbol needs to refer the kernel data symbol
(linux_proc_banner), it requires CONFIG_KALLSYMS_ALL.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Add kprobe-event with $comm argument testcase to
ftracetest. This not only checks syntax but
also checks log file.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Improve the kprobe-event with argument types testcase
to test it with various bitsize.
kprobe-event argument can be recorded in given types with
various bitsize (8, 16, 32, 64), thus the type testcase
should test the different bitsize too.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Improve kretprobe testcase to check the log data correctness
and ensure the event definition is corrctly including
argument definition.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Improve kprobe testcase to check the log data correctness
and ensure the event definition is corrctly including
argument definition.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Improve kprobe events on module testcase to check module
load/unload with disabled/enabled events. This also change
the target module to trace_printk.ko, so it depends on
CONFIG_SAMPLE_TRACE_PRINTK=m.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Use raw loopback address instead of localhost, because
"localhost" can depend on nsswitch and in some case
we can not resolve the localhost.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Fix a test case to make checkbashisms clean.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Test $comm in kprobe-event argument syntax testcase
only if it is supported on the kernel because
$comm has been introduced 4.8 kernel.
So on older stable kernel, it should be skipped.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Since ftracetest framework calls initialize_ftrace() right before
each test and after all tests, we don't need to init/cleanup
ftrace for each test case.
Just remove such unneeded init/cleanup code because it can
increase logfile size.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Cleanup ftrace by initialize_ftrace() after running
all test cases. This means we also don't need cleanup
ftrace on each test case, except for some special
options.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Add SPDX License Identifier line to template file so
that someone who makes new testcase from the template
does not forgot it.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Clear pid filter, synthetic_events, snapshots,
ftrace filter, and trace log in initialize_ftrace(),
since those are used in test cases.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Add a case number prefix to each logfile. This makes
it easier to find which logfile is corresponding
to which failure.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Add --console hidden option for debug test cases.
This option allows to put "sh" or something else
when the test case hits a bug.
For example, if you find a testcase which doesn't
pass, you can insert sh for interactive debug as below
-----
#!/bin/sh
# description: sample test case
good-command
suspicious-wrong-command
sh # <- add this for interactive debug
-----
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Add --stop-fail option for debugging the ftracetest.
With this option, ftracetest stops right after a testcase
fails instead of finish running all testcases.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
