This reverts commit 840ef5295c0b5c6edca8cbeaaa30793c797f64bb.
This change is breaking several builds on Android T and U:
Example:
https://jenkins.mot.com/job/T2SR33_rhode-g_userdebug_mr_r-qsm2020_test-keys_continuous/https://jenkins.mot.com/job/UTGN34_genevn-g_userdebug_ms_r-q8450_test-keys_continuous/
Error message:
In file included from build/make/core/binary.mk:9:
build/make/core/base_rules.mk:335: error: vendor/st/laser_daemon/vl53l1_test: MODULE.TARGET.EXECUTABLES.vl53l1_reg already defined by motorola/kernel/modules/drivers/input/misc/vl53l1_test.
06:28:17 ckati failed with: exit status 1
Change-Id: I5a253adf9c1be3d6a31e4d597b9a8ea269b2ec3f
Reviewed-on: https://gerrit.mot.com/2660663
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Reviewed-by: Gilberto Gambugge Neto <gambugge@motorola.com>
Submit-Approved: Gilberto Gambugge Neto <gambugge@motorola.com>
Tested-by: Gilberto Gambugge Neto <gambugge@motorola.com>
1.KEY_FX will report to APP and this may cause APP mistake reaction.
2.Change touch gesture mode key values:
single tap: KEY_F1 -> BTN_TRIGGER_HAPPY3
zero tap down: KEY_F2 -> BTN_TRIGGER_HAPPY4
zero tap up: KEY_F3 -> BTN_TRIGGER_HAPPY5
double tap: KEY_F4 -> BTN_TRIGGER_HAPPY6
Change-Id: I9e732020e4ad78b05ee1aa42e7e68a8952716392
Signed-off-by: Wenge Zhu <zhuwg1@motorola.com>
Reviewed-on: https://gerrit.mot.com/2655037
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jun Weng <wengjun1@motorola.com>
Reviewed-by: Tao Sun <suntao2@motorola.com>
Submit-Approved: Jira Key
In order to track the usb abnormal disconnect problem,
open some log about usb in factory version recommended
by Qualcomm for bangkk.
Change-Id: If317121e650bd48fd09e50825ecd3fa83cc77c02
Reviewed-on: https://gerrit.mot.com/2654715
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Zonghua Liu <a17671@motorola.com>
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key
Add st54spi_gpio driver for ST54L eSE
It is used for QC esepowermanager to reset eSE
Change-Id: Ie4e88f6ea56c3d60f90e88e750be6b25c0500508
Signed-off-by: zhuangnk1 <zhuangnk1@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2654151
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Tao Sun <suntao2@motorola.com>
Submit-Approved: Jira Key
Porting from
1. (CR) aion: dlkm: Support game idle scan rate feature
for ft3681,https://gerrit.mot.com/2538693
- Support for game idle scan rate feature, keep 1500hz scanning
frequency for 10 seconds when entering idle in game mode.
2.(CR) aion: Change edge suppression cmd in normal mode
- To prevent conflicts with edge suppression commands in game mode,
match firmware to change edge suppression commands in normal mode.
Change-Id: I6303d367752d9bf7709e1b42df4fa2ce6c5fd33b
Signed-off-by: Yan Zhang <zhangy26@motorola.com>
Reviewed-on: https://gerrit.mot.com/2649117
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jun Weng <wengjun1@motorola.com>
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key
Added support for clip area feature. This alows suppressing touch
events reported outside or from within the clip area.
Change-Id: I2fccf524df373a5a3848d884f2ecf33d4e667f5a
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/2642708
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: <zhuwg1@motorola.com>
Reviewed-by: Jun Weng <wengjun1@motorola.com>
Reviewed-by: Qing Chang <qing@motorola.com>
Submit-Approved: Jira Key
This introduces a new class method to suppress touch events sourced
outside or within specified clip area. To enable suppressing touch
events reported outside specified clip area, add the following DT
property:
mmi,clip-area = <xUL yUL xBR yBR>;
Suppressing touch events from within requires DT property:
mmi,clip-inversion;
Class driver's method will send forced lift event when an active
touch moves outside/within clip area and indicate this to the vendor
driver by setting type to TS_COORDINATE_ACTION_FORCE_LIFT in
touch_event_data structure.
Change-Id: I327af4441e179e381be97cb8083698d76882caa8
Signed-off-by: Konstantin Makariev <hcv867@motorola.com>
Reviewed-on: https://gerrit.mot.com/2641660
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: <zhuwg1@motorola.com>
Reviewed-by: Jun Weng <wengjun1@motorola.com>
Reviewed-by: Qing Chang <qing@motorola.com>
Submit-Approved: Jira Key
Following changes are made to fix Devon build issue:
- conditionally enable spi CS Hold Time feature based on product flag
- include proper spi header file depending on kernel version
For details please refer to: https://gerrit.mot.com/2630767
Change-Id: I7d1e6e55ccde912442f11c71f1f92e5302318315
Reviewed-on: https://gerrit.mot.com/2637062
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Bruno Oliveira <brunosoe@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
Capacity is not getting updated because of wrong status
being checked by update capacity. Force updating battery
status before reading it to decide about updating capacity.
Change-Id: I1d8f68d7fb855aa878284b34303d04ccf1c5c2ab
signed-off-by: brunosmp@motorola.com
Reviewed-on: https://gerrit.mot.com/2633986
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Rafael Ortolan <rafones@motorola.com>
Reviewed-by: litong <litong20@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
Miami is having a Kernel Panic when battery reaches 0%
while device is charging. Android system uses battery
capacity_level prop to control shutdown when device is
charging but battery reaches a critical level. Add
this prop to discrete charger driver.
Change-Id: I6a278ba0157a22a54ecedf0cf26f73361e711354
signed-off-by: brunosmp@motorola.com
Reviewed-on: https://gerrit.mot.com/2625350
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Haijian Ma <mahj8@motorola.com>
Reviewed-by: Bruno Oliveira <brunosoe@motorola.com>
Reviewed-by: Lu Chai <chailu1@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Submit-Approved: Jira Key
bangkk select the max current is beyond the sourcecap pdo.
Optimize the pdo max current when the pd power is lower than
18W.
Change-Id: Iaded43336951bcfbd9620d45a89c3517ccd058a9
Signed-off-by: Lei Chen <chenlei18@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2638964
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Reviewed-by: Lei Chen <chenl18@motorola.com>
Submit-Approved: Jira Key
Set touch reset and interrupt pin to low after touch IC
powered off to reduce power consumption.
Change-Id: I9befe0b38669af4085d268e3564d966ee16bfada
Signed-off-by: Wenge Zhu <zhuwg1@motorola.com>
Reviewed-on: https://gerrit.mot.com/2637539
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jun Weng <wengjun1@motorola.com>
Reviewed-by: Guobin Zhang <zhanggb@motorola.com>
Submit-Approved: Jira Key
cw2217b:
When the soc reaches 100 and the usb is online, and the
battery is not in discharging status, the ui_soc remains
at 100.
Change-Id: I075229f572eb3330f490b5840d25d1ed119311c4
Reviewed-on: https://gerrit.mot.com/2631323
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Wentao Xu <xuwt2@motorola.com>
Reviewed-by: Guobin Zhang <zhanggb@motorola.com>
Submit-Approved: Jira Key
Sometimes the pump can't recovery if disabled accidentally.
The recovery_pmic_chrg flag should reset to 0.
Change-Id: I01119c6531ca42aa7e92d590cca9989ce18a53b0
Signed-off-by: Lei Chen <chenlei18@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2630990
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Wei Xu <xuwei9@lenovo.com>
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key
To ensure the battery current can meet the target, optimize the
qc3p init votalge while the soc above 65%.
Change-Id: I005799a1a530bd1d5899206da4f64bf4492d4c84
Signed-off-by: Lei Chen <chenlei18@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2629112
SLTApproved: Slta Waiver
SME-Granted: SME Approvals Granted
Tested-by: Jira Key
Reviewed-by: Wei Xu <xuwei9@lenovo.com>
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key
First unify the polarity of the current through the ibat_polority,
then judge the charging state according to the polarity of the current.
Change-Id: Ie2c155708e0c6808f56502325af0248e74e6c420
Reviewed-on: https://gerrit.mot.com/2620148
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Yonghua Yan <yanyh2@motorola.com>
Reviewed-by: Guobin Zhang <zhanggb@motorola.com>
Submit-Approved: Jira Key
Set touch reset and interrupt pin to low after touch IC
powered off to reduce power consumption.
Change-Id: I9443a29ee5ccb7d19290024048e054102710a65b
Signed-off-by: Wenge Zhu <zhuwg1@motorola.com>
Reviewed-on: https://gerrit.mot.com/2619346
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
Different devices require different settings for tcpc's max polling
count. Make this value configurable.
Change-Id: I10b3bc4f27d14e00c5ec2b4ca943c1f97b4eb14a
Reviewed-on: https://gerrit.mot.com/2610513
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Bruno Oliveira <brunosoe@motorola.com>
Reviewed-by: Huosheng Liao <liaohs@motorola.com>
Reviewed-by: Lu Chai <chailu1@motorola.com>
Submit-Approved: Jira Key
SME-Granted: SME Approvals Granted
The value of ui_full will be lost after reboot,
so save the value of ui_full to the 0xA2 register.
Change-Id: Ib183f9ee745e8e91207f5dd0763729845573ec04
Reviewed-on: https://gerrit.mot.com/2612156
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Wentao Xu <xuwt2@motorola.com>
Reviewed-by: Guobin Zhang <zhanggb@motorola.com>
Submit-Approved: Jira Key
Firmware flash is ok but verify fail, change to verify the last 4 bytes
on firmware.
Change-Id: If4e80a914d8ad7b9352a26fb7259aa97451c7863
Signed-off-by: Wenge Zhu <zhuwg1@motorola.com>
Reviewed-on: https://gerrit.mot.com/2611066
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Jichao Zou <zoujc@motorola.com>
Submit-Approved: Jira Key
Goodix touch:
Clear correct bit 13 to enable FOD zero tap wake up gesture.
Change-Id: Iece50a5dc5ae27c562f0cdf1087c44ec6fa5d5c7
Signed-off-by: Yan Zhang <zhangy26@motorola.com>
Reviewed-on: https://gerrit.mot.com/2608756
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Wei Deng <dengwei1@motorola.com>
Reviewed-by: <zhuwg1@motorola.com>
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key
The qc3p request voltage is too high while the vbat
is float. Optimize the qc3p request voltage when
charger pump entry.
Change-Id: I206e23f6f21519cf59725ce5d0874e11582325c9
Signed-off-by: Lei Chen <chenlei18@lenovo.com>
Reviewed-on: https://gerrit.mot.com/2603252
SME-Granted: SME Approvals Granted
SLTApproved: Slta Waiver
Tested-by: Jira Key
Reviewed-by: Lei Chen <chenl18@motorola.com>
Reviewed-by: Xiangpo Zhao <zhaoxp3@motorola.com>
Submit-Approved: Jira Key
