Update WMI CE buffer size to 3520 Bytes to support
large frame size on QCA6490.
Change-Id: I1f3326f40bf18dda6010def57ea7f2e0961bc725
CRs-Fixed: 3036932
Send only eapol packets to stack and drop other packets
when found in rx err path when either REO or RXDMA push
reason is set to ROUTE type.
Change-Id: If1f43426adf21f7d00f17d369cd7fde7f7f85866
CRs-Fixed: 3114312
Num stats over QMI indicates how many stats requests are fetched
without triggering RTPM resume. If RTPM resume/suspend happens in
the middle then num stats over QMI counter should reset. Add logic
to reset num stats over QMI counter during WoW enter/exit.
Change-Id: I34fe93759bf8a7a2a6c0d4b389ad96b8e1ba4d6c
CRs-Fixed: 3110590
Add a log message to indicate RTPM resume is requested by RTPM
prevent runtime suspend API.
Change-Id: Ifb90493d1ea48601bb40708b1a2d7a821144a9b2
CRs-Fixed: 3110580
In QCA6750 target hif sleep timer is not used but timer
delete is performed during deinit path.
Fix this so that hif sleep timer delete operation is not
performed in QCA6750 target.
Change-Id: I54790f3b20af4f4b265ab37b593d300032f00fa5
CRs-Fixed: 3108047
As part of code change we are removing csum_enabled flag check.
In that case, csum_enabled becomes redundant since we are not using it
in the code base, So remove redundant code as part of the cleanup.
Change-Id: Iac411b20f06436053b1969a1af9e3b3ee418c34c
CRs-Fixed: 3070858
Currently, to set checksum enable flags in Tx descriptor
we are checking the csum_enabled flag along with stack checksum
offload request. In case of roaming from latency-critical connection
to non-latency critical connection we request stack to calculate
checksum and set csum_enabled flag to 0. For some packets which
are already queued where the stack has not calculated checksum and
csum_enabled flag is set to 0, we will not set the checksum enable
flags in Tx descriptors for those packets.
To fix the issue remove the csum_enabled flag check and directly
check if the stack has calculated checksum for those packets or not.
Change-Id: I8d7754afc3d0a33315b85b0113cd3062e5783e28
CRs-Fixed: 3070858
With this change add log with scan channels list dump to print
if NAN is enabled or not for any frequency.
Change-Id: I81f5017c7f146d2c7bd227601ae320d9cc67f82f
CRs-Fixed: 3042903
Customer reported their HLOS LTE-WLAN transition algo sometimes go wrong
for wrong low layer stats, Txretry delta is bigger than Txtotal delta.
Txretry unit is msdu while Txtotal unit is mpdu.
Add vdev/peer stats for mpdu number of successfully transmitted after
more than one retransmission attempt, to align mpdu tx_packets, tx_failed.
CRs-Fixed: 3099490
Change-Id: Id4b9d8fd81af4bf0c141dad481bfd2b3f6c1db2a
Currently api wlan_reg_get_6g_ap_master_chan_list is declared
and defined under CONFIG_AFC_SUPPORT feature flag, since this is
a generic API and can be used by other functionalities as well.
With this change move wlan_reg_get_6g_ap_master_chan_list api
out of CONFIG_AFC_SUPPORT feature flag.
Change-Id: Ifa7b27895b4660bbf248fc2827472ba50c9df9a4
CRs-Fixed: 3090281
Currently there is no recovery reason for stats request failure.
With this change add QDF_STATS_REQ_TIMEDOUT for stats request
failure.
Change-Id: Ie9ae8259fc20b4d8829b760e818b6a1f9194a9d0
CRs-Fixed: 3106570
Host splits MBSSID into individual scan entries. The IEs
added into the new scan entries should neither be in the
non-inheritance list nor a duplicate IE. Host checks duplicity
of Vendor specific IEs by comparing the OUI, type subtype of
the non-tx and tx BSSID IEs.
Adaptive 11r VS IEs doesn't have subtype, and host uses
IE data as subtype. In this case, even if both the IEs are
same, still both are added into the new scan entry. The
supplicant uses the capability from the first IE belonging
to the tx profile leading to connection failure.
In MBSSID parsing logic, add exception for OUI from this
specific vendor in the Vendor IE comparison logic.
Change-Id: I7bb6cc7ebe34a5f007b9b84c91d6db6c7fcf997b
CRs-Fixed: 3084721
Fix the invalid VAP instance error seen when RCC is
enabled and ol_ath_stats (enhanced stats) feature is
disabled case.
Populate gI as well similar to other rate stats in
CFR handler where this information would not be
available if ol_ath_stats is disabled.
CRs-Fixed: 3056621
Change-Id: Id1af6359408cb977ba0becf298121ee10dd5ef72
HAL changes to populate agc gain, CFO, rx_start_ts, mcs_rate and
gi_type to CFR info for QCA6490.
Change-Id: I6f6f47c87d40bd661162f764fb3a360230a56457
CRs-Fixed: 3086667
There is wrong chip type in cfr meta data header if run CFR/CSI with
HSP since doesn't fill it for QCA6490 & QCA6750.
Change-Id: I932c065d33c5eaa33f66ec8a92470f5820472d7b
CRs-Fixed: 3073865
Add mcs rate, gI type and other SU sig info to cfr metadata.
For Tx based capture mcs rate & gI type is applicable
MCS For legacy mode
0: 48 Mbps
1: 24 Mbps
2: 12 Mbps
3: 6 Mbps
4: 54 Mbps
5: 36 Mbps
6: 18 Mbps
7: 9 Mbps
8: invalid entry
MCS for HT, 0-7: MCS0-MCS7,
MCS for VHT, 0-9: MCS0-MCS9,
MCS for HE, 0-11 MCS0-MCS11, 12-13: 4096QAM
GI:
0: 0.8 us
1: 0.4 us
2: 1.6 us
3: 3.2 us
ltf_size:
0: he_ltf_1_x
1: he_ltf_2_x
2: he_ltf_4_x
dcm: Indicates if DCM set
0: No DCM
1: DCM
sgi: Indicates if short gI used
0: No short gI
1: short gI
beamformed: Is packet beamformed
0: non-beamformed
1: beamformed
stbc: Indicates if stbc applied
0: No STBC
1: STBC
Coding:
0: BCC
1: LDPC
Change-Id: If6ab4b4878ab24406aba0e890ec08a2dae2b4634
Add CFO, agc_gain and rx start timestamp related parameters
to wmi_cfr_peer_tx_event_param and populate the same with
data from FW peer tx event.
Change-Id: I462fa56a854b18d1f9b46d1e14eea85da0d45f23
Separate the common fields of csi_cfr_header and update
the logic of calculating the cfr_metadata_len.
Move cmn header update code to single place.
CRs-Fixed: 2916901
Change-Id: I97d99df45f667f4ed3b80264b12d3d09a3bcae95
Extract agc gain information, CFO & rx_start_ts from
rx status and cfr peer capture event to CFR host metadata
Change-Id: Id896554f1da6920bd3eeced1298b07857d41a68b
In flow control code switch logic break statements are not used
intentionally, but compiler is treating this as error.
So to avoid compilation error add fall through comment.
Change-Id: Ic79b75c48554182fba7c4c0f3885e3a44347e2e7
CRs-Fixed: 3090182
In function wbuff_buff_put(), there is a possibility to
access array out of boundaries for module slot and pool slot.
Add condition to check for array boundaries.
Change-Id: Iaf5a0ef6b2e712804717abf27d0c0d06862a04f5
CRs-Fixed: 3086342
Some p2p action frame needs big retry count than the default
max 15 retry count to get high tx successful ratio.
FW allocates 3 extra bits for retry count setup.
To use this field needs FW change in CR 3082533.
Set the extra 3 bits "retry_limit_ext" to "tx_param_dword0"
field for WMI MGMT send command. Existing 4 bits
"retry_limit" combines with this new 3 bits
"retry_limit_ext" to create a 7 bits retry count:
bit 0 - 3: retry_limit
bit 4 - 6: retry_limit_ext.
So Maximum 127 retries can be specified to a certain mgmt
frame.
To use this field needs FW change in CR 3082533.
Change-Id: I889933ea1750c03701ba8a60340f27e6c2594c1b
CRs-Fixed: 3082534
Currently EP wake delay timeout is less and there is chance
of timeout to happen, so increase the timeout value.
Change-Id: I59261ade269908cd4d9c17025838807f39913999
CRs-Fixed: 3086547
Due to DP flow control network queues are stuck in
paused state and not getting reset even after new connection.
This is causing DHCP packets to be dropped and resulting
immediate disconnection after every connection.
Fix this by properly pausing and unpausing the AC flow control
based network subqueues during disconnection/connection events.
Change-Id: I280e704d5a01b19d180c32aaa272c0cb731f8c0e
CRs-Fixed: 3078745
These defines are used by Supported Rates or Extended Supported Rates
IE to set additional information beside rate.
Change-Id: I44eac41a9a07d368a6fe3abc76e341915b3249b9
CRs-Fixed: 3034939
Classify qmi/wmi by request type, only TYPE_STATION_STATS
is designed to be sent by qmi so far. other type will
continue go with wmi.
Change-Id: Ibaee99c0a9d59b0db634e84f3c0b6e40b65a185d
CRs-Fixed: 3077792
Add debug log in case BSS freq is not matching the freq list
provided in scan filter.
Change-Id: I00da614f4a5b4fdf58122cf2750afe5c03114536
CRs-Fixed: 3035787
Currently, we are Flushing fragments for peer as part of rx defrag
clean up. There is the possibility that frag flush is called while
we are accessing frags in rx defrag store fragment path in parallel.
Which will cause access after the free issue.
Extending lock in rx defrag store fragment path to avoid any
parallel flush while accessing the frags.
Change-Id: I1e897b195f61d80ea6738e9a93f7bcaaa04adc97
CRs-Fixed: 3065414
if tx hw enqueue failed, tx descriptor is released first, nbuf pointer
in it is reset to NULL, then descriptor unmap will fail, nbuf is left
unmapped in wlan CB, in worst case, wlan CB DMA address space is used
out, new dma map will fail, assert will happen.
Change-Id: I97b4ab304d884cafcf0303529ed93682690dce12
CRs-Fixed: 3073466
The maximum WBM2SW rings in whunt for HSP is 5 and
the same could be 4 in wlan code which will result
in wcov failure for HSP. Use a maximum of 5 WBM2SW
rings for HSP based on FW_SIM config flag to address
this failure.
Change-Id: I8340cd094eb1e0cf842894e5c89174d410729028
CRs-Fixed: 3071662
In case of successful transmission If MPDU tx
is retried more than the threshold then
increment MPDU retry count by transmit_cnt / threshold
Change-Id: Idbc7e2d0579ff68e272132fe4ffe9f951c4aacf5
CRs-Fixed: 3058464
This change introduces the new roam set param WMI command to set
the roam params from host to FW.
Also added a fail_bssid param in wmi_roam_result TLV to know the
roam failed AP BSSID from the FW.
Added a new vendor command event for sending roam events stats
attributes to userspace.
Change-Id: I7a08635a7912cbd940d90a2d62433296740ad913
CRs-Fixed: 3050799
Introduce a new vendor command QCA_NL80211_VENDOR_SUBCMD_ROAM_EVENTS
that aims to configure/trigger the roam events from the driver.
Change-Id: Ifd9464cc8cb485890c8d171dc136d377f7a59fa1
CRs-Fixed: 3028404
