[ Upstream commit 8653d71ce3763aedcf3d2331f59beda3fecd79e4 ]
Currently a tasklet is used to transmit input substream buffer
data. However, tasklets have long been deprecated as being too
heavy on the system by running in irq context - and this is not
a performance critical path. If a higher priority process wants
to run, it must wait for the tasklet to finish before doing so.
Deferring work to a workqueue and executing in process context
should be fine considering the callback already does
f_midi_do_transmit() under the transmit_lock and thus changes in
semantics are ok regarding concurrency - tasklets being serialized
against itself.
Cc: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Link: https://lore.kernel.org/r/20210111042855.73289-1-dave@stgolabs.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 4ab37fcb4283 ("USB: gadget: f_midi: f_midi_complete to call queue_work")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6148c10f6b62a6df782d26522921f70cc8bf1d7f ]
In preparation for unconditionally passing the
struct tasklet_struct pointer to all tasklet
callbacks, switch to using the new tasklet_setup()
and from_tasklet() to pass the tasklet pointer explicitly.
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
Link: https://lore.kernel.org/r/20200817090209.26351-5-allen.cryptic@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 4ab37fcb4283 ("USB: gadget: f_midi: f_midi_complete to call queue_work")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d3a8c28426fc1fb3252753a9f1db0d691ffc21b0 ]
There is a frequent timeout during controller enter/exit from halt state
after toggling the run_stop bit by SW. This timeout occurs when
performing frequent role switches between host and device, causing
device enumeration issues due to the timeout. This issue was not present
when USB2 suspend PHY was disabled by passing the SNPS quirks
(snps,dis_u2_susphy_quirk and snps,dis_enblslpm_quirk) from the DTS.
However, there is a requirement to enable USB2 suspend PHY by setting of
GUSB2PHYCFG.ENBLSLPM and GUSB2PHYCFG.SUSPHY bits when controller starts
in gadget or host mode results in the timeout issue.
This commit addresses this timeout issue by ensuring that the bits
GUSB2PHYCFG.ENBLSLPM and GUSB2PHYCFG.SUSPHY are cleared before starting
the dwc3_gadget_run_stop sequence and restoring them after the
dwc3_gadget_run_stop sequence is completed.
Fixes: 72246da40f ("usb: Introduce DesignWare USB3 DRD Driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Selvarasu Ganesan <selvarasu.g@samsung.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20250201163903.459-1-selvarasu.g@samsung.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 461ee467507cb98a348fa91ff8460908bb0ea423 ]
Since EP0 transactions need to be completed before the controller halt
sequence is finished, this may take some time depending on the host and the
enabled functions. Increase the controller halt timeout, so that we give
the controller sufficient time to handle EP0 transfers.
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Link: https://lore.kernel.org/r/20220901193625.8727-4-quic_wcheng@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: d3a8c28426fc ("usb: dwc3: Fix timeout issue during controller enter/exit from halt state")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ade81479c7dda1ce3eedb215c78bc615bbd04f06 ]
A soft lockup issue was found in the product with about 56,000 tasks were
in the OOM cgroup, it was traversing them when the soft lockup was
triggered.
watchdog: BUG: soft lockup - CPU#2 stuck for 23s! [VM Thread:1503066]
CPU: 2 PID: 1503066 Comm: VM Thread Kdump: loaded Tainted: G
Hardware name: Huawei Cloud OpenStack Nova, BIOS
RIP: 0010:console_unlock+0x343/0x540
RSP: 0000:ffffb751447db9a0 EFLAGS: 00000247 ORIG_RAX: ffffffffffffff13
RAX: 0000000000000001 RBX: 0000000000000000 RCX: 00000000ffffffff
RDX: 0000000000000000 RSI: 0000000000000004 RDI: 0000000000000247
RBP: ffffffffafc71f90 R08: 0000000000000000 R09: 0000000000000040
R10: 0000000000000080 R11: 0000000000000000 R12: ffffffffafc74bd0
R13: ffffffffaf60a220 R14: 0000000000000247 R15: 0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f2fe6ad91f0 CR3: 00000004b2076003 CR4: 0000000000360ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
vprintk_emit+0x193/0x280
printk+0x52/0x6e
dump_task+0x114/0x130
mem_cgroup_scan_tasks+0x76/0x100
dump_header+0x1fe/0x210
oom_kill_process+0xd1/0x100
out_of_memory+0x125/0x570
mem_cgroup_out_of_memory+0xb5/0xd0
try_charge+0x720/0x770
mem_cgroup_try_charge+0x86/0x180
mem_cgroup_try_charge_delay+0x1c/0x40
do_anonymous_page+0xb5/0x390
handle_mm_fault+0xc4/0x1f0
This is because thousands of processes are in the OOM cgroup, it takes a
long time to traverse all of them. As a result, this lead to soft lockup
in the OOM process.
To fix this issue, call 'cond_resched' in the 'mem_cgroup_scan_tasks'
function per 1000 iterations. For global OOM, call
'touch_softlockup_watchdog' per 1000 iterations to avoid this issue.
Link: https://lkml.kernel.org/r/20241224025238.3768787-1-chenridong@huaweicloud.com
Fixes: 9cbb78bb31 ("mm, memcg: introduce own oom handler to iterate only over its own threads")
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 72ba14deb40a9e9668ec5e66a341ed657e5215c2 ]
The current implementation of the mark_victim tracepoint provides only the
process ID (pid) of the victim process. This limitation poses challenges
for userspace tools requiring real-time OOM analysis and intervention.
Although this information is available from the kernel logs, it’s not
the appropriate format to provide OOM notifications. In Android, BPF
programs are used with the mark_victim trace events to notify userspace of
an OOM kill. For consistency, update the trace event to include the same
information about the OOMed victim as the kernel logs.
- UID
In Android each installed application has a unique UID. Including
the `uid` assists in correlating OOM events with specific apps.
- Process Name (comm)
Enables identification of the affected process.
- OOM Score
Will allow userspace to get additional insight of the relative kill
priority of the OOM victim. In Android, the oom_score_adj is used to
categorize app state (foreground, background, etc.), which aids in
analyzing user-perceptible impacts of OOM events [1].
- Total VM, RSS Stats, and pgtables
Amount of memory used by the victim that will, potentially, be freed up
by killing it.
[1] https://cs.android.com/android/platform/superproject/main/+/246dc8fc95b6d93afcba5c6d6c133307abb3ac2e:frameworks/base/services/core/java/com/android/server/am/ProcessList.java;l=188-283
Signed-off-by: Carlos Galo <carlosgalo@google.com>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: ade81479c7dd ("memcg: fix soft lockup in the OOM process")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9d2bb9a74b2877f100637d6ab5685bcd33c69d44 ]
Two more fixes:
* some test vectors in commit 79e6e2f3f3ff ("crypto: testmgr - populate
RSA CRT parameters in RSA test vectors") had misplaced commas, which
break the test and trigger KASAN warnings at least on x86-64
* pkcs1pad test vector did not have its CRT parameters
Fixes: 79e6e2f3f3ff ("crypto: testmgr - populate RSA CRT parameters in RSA test vectors")
Reported-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 79e6e2f3f3ff345947075341781e900e4f70db81 ]
Changes from v1:
* replace some accidental spaces with tabs
In commit f145d411a67e ("crypto: rsa - implement Chinese Remainder Theorem
for faster private key operations") we have started to use the additional
primes and coefficients for RSA private key operations. However, these
additional parameters are not present (defined as 0 integers) in the RSA
test vectors.
Some parameters were borrowed from OpenSSL, so I was able to find the
source. I could not find the public source for 1 vector though, so had to
recover the parameters by implementing Appendix C from [1].
[1]: https://nvlpubs.nist.gov/nistpubs/SpecialPublications/NIST.SP.800-56Br1.pdf
Fixes: f145d411a67e ("crypto: rsa - implement Chinese Remainder Theorem for faster private key operations")
Reported-by: Tasmiya Nalatwad <tasmiya@linux.vnet.ibm.com>
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0bb8f125253843c445b70fc6ef4fb21aa7b25625 ]
According to PKCS#1 standard, the 'otherPrimeInfos' field contains
the information for the additional primes r_3, ..., r_u, in order.
It shall be omitted if the version is 0 and shall contain at least
one instance of OtherPrimeInfo if the version is 1, see:
https://www.rfc-editor.org/rfc/rfc3447#page-44
Replace the version number '1' with 0, otherwise, some drivers may
not pass the run-time tests.
Signed-off-by: lei he <helei.sig11@bytedance.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a9887010ed2da3fddaff83ceec80e2b71be8a966 ]
According to the BER encoding rules, integer value should be encoded
as two's complement, and if the highest bit of a positive integer
is 1, should add a leading zero-octet.
The kernel's built-in RSA algorithm cannot recognize negative numbers
when parsing keys, so it can pass this test case.
Export the key to file and run the following command to verify the
fix result:
openssl asn1parse -inform DER -in /path/to/key/file
Signed-off-by: Lei He <helei.sig11@bytedance.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 39ef08517082a424b5b65c3dbaa6c0fa9d3303b9 ]
Fix wrong test data at testmgr.h, it seems to be caused
by ignoring the last '\0' when calling sizeof.
Signed-off-by: Lei He <helei.sig11@bytedance.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit bfa54a793ba77ef696755b66f3ac4ed00c7d1248 upstream.
For bus_register(), any error which happens after kset_register() will
cause that @priv are freed twice, fixed by setting @priv with NULL after
the first free.
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20240727-bus_register_fix-v1-1-fed8dd0dba7a@quicinc.com
[ hagar : required setting bus->p with NULL instead of priv]
Signed-off-by: Hagar Hemdan <hagarhem@amazon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 87c4b5e8a6b65189abd9ea5010ab308941f964a4 upstream.
In StorVSC, payload->range.len is used to indicate if this SCSI command
carries payload. This data is allocated as part of the private driver data
by the upper layer and may get passed to lower driver uninitialized.
For example, the SCSI error handling mid layer may send TEST_UNIT_READY or
REQUEST_SENSE while reusing the buffer from a failed command. The private
data section may have stale data from the previous command.
If the SCSI command doesn't carry payload, the driver may use this value as
is for communicating with host, resulting in possible corruption.
Fix this by always initializing this value.
Fixes: be0cf6ca30 ("scsi: storvsc: Set the tablesize based on the information given by the host")
Cc: stable@kernel.org
Tested-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Roman Kisel <romank@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Long Li <longli@microsoft.com>
Link: https://lore.kernel.org/r/1737601642-7759-1-git-send-email-longli@linuxonhyperv.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d6ff94afd90b0ce8d1715f8ef77d4347d7a7f2c0 upstream.
Shuang Li reported an QinQ issue by simply doing:
# ip link add dummy0 type dummy
# ip link add link dummy0 name dummy0.1 type vlan id 1
# ip link add link dummy0.1 name dummy0.1.2 type vlan id 2
# rmmod 8021q
unregister_netdevice: waiting for dummy0.1 to become free. Usage count = 1
When rmmods 8021q, all vlan devs are deleted from their real_dev's vlan grp
and added into list_kill by unregister_vlan_dev(). dummy0.1 is unregistered
before dummy0.1.2, as it's using for_each_netdev() in __rtnl_kill_links().
When unregisters dummy0.1, dummy0.1.2 is not unregistered in the event of
NETDEV_UNREGISTER, as it's been deleted from dummy0.1's vlan grp. However,
due to dummy0.1.2 still holding dummy0.1, dummy0.1 will keep waiting in
netdev_wait_allrefs(), while dummy0.1.2 will never get unregistered and
release dummy0.1, as it delays dev_put until calling dev->priv_destructor,
vlan_dev_free().
This issue was introduced by Commit 563bcbae3ba2 ("net: vlan: fix a UAF in
vlan_dev_real_dev()"), and this patch is to fix it by moving dev_put() into
vlan_dev_uninit(), which is called after NETDEV_UNREGISTER event but before
netdev_wait_allrefs().
Fixes: 563bcbae3ba2 ("net: vlan: fix a UAF in vlan_dev_real_dev()")
Reported-by: Shuang Li <shuali@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Signed-off-by: Ivan Delalande <colona@arista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 37aa50c539bcbcc01767e515bd170787fcfc0f33 upstream.
This patch is to introduce vlan_dev_free_egress_priority() to
free egress priority for vlan dev, and keep vlan_dev_uninit()
static as .ndo_uninit. It makes the code more clear and safer
when adding new code in vlan_dev_uninit() in the future.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Signed-off-by: Ivan Delalande <colona@arista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit be84f32bb2c981ca670922e047cdde1488b233de upstream.
->d_name.name can change on rename and the earlier value can be freed;
there are conditions sufficient to stabilize it (->d_lock on dentry,
->d_lock on its parent, ->i_rwsem exclusive on the parent's inode,
rename_lock), but none of those are met at any of the sites. Take a stable
snapshot of the name instead.
Link: https://lore.kernel.org/all/20240202182732.GE2087318@ZenIV/
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
[ Samasth: bp to fix CVE-2024-39494; Minor conflict resolved due to code context change ]
Signed-off-by: Samasth Norway Ananda <samasth.norway.ananda@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c79a39dc8d060b9e64e8b0fa9d245d44befeefbe upstream.
On a board running ntpd and gpsd, I'm seeing a consistent use-after-free
in sys_exit() from gpsd when rebooting:
pps pps1: removed
------------[ cut here ]------------
kobject: '(null)' (00000000db4bec24): is not initialized, yet kobject_put() is being called.
WARNING: CPU: 2 PID: 440 at lib/kobject.c:734 kobject_put+0x120/0x150
CPU: 2 UID: 299 PID: 440 Comm: gpsd Not tainted 6.11.0-rc6-00308-gb31c44928842 #1
Hardware name: Raspberry Pi 4 Model B Rev 1.1 (DT)
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : kobject_put+0x120/0x150
lr : kobject_put+0x120/0x150
sp : ffffffc0803d3ae0
x29: ffffffc0803d3ae0 x28: ffffff8042dc9738 x27: 0000000000000001
x26: 0000000000000000 x25: ffffff8042dc9040 x24: ffffff8042dc9440
x23: ffffff80402a4620 x22: ffffff8042ef4bd0 x21: ffffff80405cb600
x20: 000000000008001b x19: ffffff8040b3b6e0 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: 696e6920746f6e20
x14: 7369203a29343263 x13: 205d303434542020 x12: 0000000000000000
x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000
x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000
x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000
x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000000
Call trace:
kobject_put+0x120/0x150
cdev_put+0x20/0x3c
__fput+0x2c4/0x2d8
____fput+0x1c/0x38
task_work_run+0x70/0xfc
do_exit+0x2a0/0x924
do_group_exit+0x34/0x90
get_signal+0x7fc/0x8c0
do_signal+0x128/0x13b4
do_notify_resume+0xdc/0x160
el0_svc+0xd4/0xf8
el0t_64_sync_handler+0x140/0x14c
el0t_64_sync+0x190/0x194
---[ end trace 0000000000000000 ]---
...followed by more symptoms of corruption, with similar stacks:
refcount_t: underflow; use-after-free.
kernel BUG at lib/list_debug.c:62!
Kernel panic - not syncing: Oops - BUG: Fatal exception
This happens because pps_device_destruct() frees the pps_device with the
embedded cdev immediately after calling cdev_del(), but, as the comment
above cdev_del() notes, fops for previously opened cdevs are still
callable even after cdev_del() returns. I think this bug has always
been there: I can't explain why it suddenly started happening every time
I reboot this particular board.
In commit d953e0e837 ("pps: Fix a use-after free bug when
unregistering a source."), George Spelvin suggested removing the
embedded cdev. That seems like the simplest way to fix this, so I've
implemented his suggestion, using __register_chrdev() with pps_idr
becoming the source of truth for which minor corresponds to which
device.
But now that pps_idr defines userspace visibility instead of cdev_add(),
we need to be sure the pps->dev refcount can't reach zero while
userspace can still find it again. So, the idr_remove() call moves to
pps_unregister_cdev(), and pps_idr now holds a reference to pps->dev.
pps_core: source serial1 got cdev (251:1)
<...>
pps pps1: removed
pps_core: unregistering pps1
pps_core: deallocating pps1
Fixes: d953e0e837 ("pps: Fix a use-after free bug when unregistering a source.")
Cc: stable@vger.kernel.org
Signed-off-by: Calvin Owens <calvin@wbinvd.org>
Reviewed-by: Michal Schmidt <mschmidt@redhat.com>
Link: https://lore.kernel.org/r/a17975fd5ae99385791929e563f72564edbcf28f.1731383727.git.calvin@wbinvd.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2c8507c63f5498d4ee4af404a8e44ceae4345056 upstream.
This commit re-attempts the backport of the change to the linux-5.4.y
branch. Commit 3d770d44dd ("btrfs: avoid monopolizing a core when
activating a swap file") on this branch was reverted.
During swap activation we iterate over the extents of a file and we can
have many thousands of them, so we can end up in a busy loop monopolizing
a core. Avoid this by doing a voluntary reschedule after processing each
extent.
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 3d770d44dd.
The backport for linux-5.4.y, commit 3d770d44dd ("btrfs: avoid
monopolizing a core when activating a swap file"), inserted
cond_resched() in the wrong location.
Revert it now; a subsequent commit will re-backport the original patch.
Fixes: 3d770d44dd ("btrfs: avoid monopolizing a core when activating a swap file") # linux-5.4.y
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 70e6b7d9ae3c63df90a7bba7700e8d5c300c3c60 upstream.
Leaving the PIT interrupt running can cause noticeable steal time for
virtual guests. The VMM generally has a timer which toggles the IRQ input
to the PIC and I/O APIC, which takes CPU time away from the guest. Even
on real hardware, running the counter may use power needlessly (albeit
not much).
Make sure it's turned off if it isn't going to be used.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mhkelley@outlook.com>
Link: https://lore.kernel.org/all/20240802135555.564941-1-dwmw2@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 16aae4c64600a6319a6f10dbff833fa198bf9599 upstream.
The PCI function 2 on ASIX AX99100 PCIe to Multi I/O Controller can be
configured as a single-port parallel port controller. The subvendor id
is 0x2000 when configured as parallel port. It supports IEEE-1284 EPP /
ECP with its ECR on BAR1.
Signed-off-by: Jiaqing Zhao <jiaqing.zhao@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Link: https://lore.kernel.org/r/20230724083933.3173513-5-jiaqing.zhao@linux.intel.com
Signed-off-by: Tomita Moeko <tomitamoeko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0b32216557ce3b2a468d1282d99b428bf72ff532 upstream.
Each of the 4 PCI functions on ASIX AX99100 PCIe to Multi I/O
Controller can be configured as a single-port serial port controller.
The subvendor id is 0x1000 when configured as serial port and MSI
interrupts are supported.
Signed-off-by: Jiaqing Zhao <jiaqing.zhao@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230724083933.3173513-4-jiaqing.zhao@linux.intel.com
Signed-off-by: Tomita Moeko <tomitamoeko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3029ad91335353a70feb42acd24d580d70ab258b upstream.
Move PCI Vendor and Device ID of ASIX AX99100 PCIe to Multi I/O
Controller to pci_ids.h for its serial and parallel port driver
support in subsequent patches.
Signed-off-by: Jiaqing Zhao <jiaqing.zhao@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://lore.kernel.org/r/20230724083933.3173513-3-jiaqing.zhao@linux.intel.com
[Moeko: Drop changes in drivers/net/can/sja1000/ems_pci.c]
Signed-off-by: Tomita Moeko <tomitamoeko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 367a9bffabe08c04f6d725032cce3d891b2b9e1a upstream.
nilfs_lookup_dirty_data_buffers(), which iterates through the buffers
attached to dirty data folios/pages, accesses the attached buffers without
locking the folios/pages.
For data cache, nilfs_clear_folio_dirty() may be called asynchronously
when the file system degenerates to read only, so
nilfs_lookup_dirty_data_buffers() still has the potential to cause use
after free issues when buffers lose the protection of their dirty state
midway due to this asynchronous clearing and are unintentionally freed by
try_to_free_buffers().
Eliminate this race issue by adjusting the lock section in this function.
[konishi.ryusuke@gmail.com: adjusted for page/folio conversion]
Link: https://lkml.kernel.org/r/20250107200202.6432-3-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Fixes: 8c26c4e269 ("nilfs2: fix issue with flush kernel thread after remount in RO mode because of driver's internal error or metadata corruption")
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ca76bb226bf47ff04c782cacbd299f12ddee1ec1 upstream.
Patch series "nilfs2: protect busy buffer heads from being force-cleared".
This series fixes the buffer head state inconsistency issues reported by
syzbot that occurs when the filesystem is corrupted and falls back to
read-only, and the associated buffer head use-after-free issue.
This patch (of 2):
Syzbot has reported that after nilfs2 detects filesystem corruption and
falls back to read-only, inconsistencies in the buffer state may occur.
One of the inconsistencies is that when nilfs2 calls mark_buffer_dirty()
to set a data or metadata buffer as dirty, but it detects that the buffer
is not in the uptodate state:
WARNING: CPU: 0 PID: 6049 at fs/buffer.c:1177 mark_buffer_dirty+0x2e5/0x520
fs/buffer.c:1177
...
Call Trace:
<TASK>
nilfs_palloc_commit_alloc_entry+0x4b/0x160 fs/nilfs2/alloc.c:598
nilfs_ifile_create_inode+0x1dd/0x3a0 fs/nilfs2/ifile.c:73
nilfs_new_inode+0x254/0x830 fs/nilfs2/inode.c:344
nilfs_mkdir+0x10d/0x340 fs/nilfs2/namei.c:218
vfs_mkdir+0x2f9/0x4f0 fs/namei.c:4257
do_mkdirat+0x264/0x3a0 fs/namei.c:4280
__do_sys_mkdirat fs/namei.c:4295 [inline]
__se_sys_mkdirat fs/namei.c:4293 [inline]
__x64_sys_mkdirat+0x87/0xa0 fs/namei.c:4293
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
The other is when nilfs_btree_propagate(), which propagates the dirty
state to the ancestor nodes of a b-tree that point to a dirty buffer,
detects that the origin buffer is not dirty, even though it should be:
WARNING: CPU: 0 PID: 5245 at fs/nilfs2/btree.c:2089
nilfs_btree_propagate+0xc79/0xdf0 fs/nilfs2/btree.c:2089
...
Call Trace:
<TASK>
nilfs_bmap_propagate+0x75/0x120 fs/nilfs2/bmap.c:345
nilfs_collect_file_data+0x4d/0xd0 fs/nilfs2/segment.c:587
nilfs_segctor_apply_buffers+0x184/0x340 fs/nilfs2/segment.c:1006
nilfs_segctor_scan_file+0x28c/0xa50 fs/nilfs2/segment.c:1045
nilfs_segctor_collect_blocks fs/nilfs2/segment.c:1216 [inline]
nilfs_segctor_collect fs/nilfs2/segment.c:1540 [inline]
nilfs_segctor_do_construct+0x1c28/0x6b90 fs/nilfs2/segment.c:2115
nilfs_segctor_construct+0x181/0x6b0 fs/nilfs2/segment.c:2479
nilfs_segctor_thread_construct fs/nilfs2/segment.c:2587 [inline]
nilfs_segctor_thread+0x69e/0xe80 fs/nilfs2/segment.c:2701
kthread+0x2f0/0x390 kernel/kthread.c:389
ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
</TASK>
Both of these issues are caused by the callbacks that handle the
page/folio write requests, forcibly clear various states, including the
working state of the buffers they hold, at unexpected times when they
detect read-only fallback.
Fix these issues by checking if the buffer is referenced before clearing
the page/folio state, and skipping the clear if it is.
[konishi.ryusuke@gmail.com: adjusted for page/folio conversion]
Link: https://lkml.kernel.org/r/20250107200202.6432-1-konishi.ryusuke@gmail.com
Link: https://lkml.kernel.org/r/20250107200202.6432-2-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+b2b14916b77acf8626d7@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=b2b14916b77acf8626d7
Reported-by: syzbot+d98fd19acd08b36ff422@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=d98fd19acd08b36ff422
Fixes: 8c26c4e269 ("nilfs2: fix issue with flush kernel thread after remount in RO mode because of driver's internal error or metadata corruption")
Tested-by: syzbot+b2b14916b77acf8626d7@syzkaller.appspotmail.com
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 299910dcb4525ac0274f3efa9527876315ba4f67 upstream.
After detecting file system corruption and degrading to a read-only mount,
dirty folios and buffers in the page cache are cleared, and a large number
of warnings are output at that time, often filling up the kernel log.
In this case, since the degrading to a read-only mount is output to the
kernel log, these warnings are not very meaningful, and are rather a
nuisance in system management and debugging.
The related nilfs2-specific page/folio routines have a silent argument
that suppresses the warning output, but since it is not currently used
meaningfully, remove both the silent argument and the warning output.
[konishi.ryusuke@gmail.com: adjusted for page/folio conversion]
Link: https://lkml.kernel.org/r/20240816090128.4561-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: ca76bb226bf4 ("nilfs2: do not force clear folio if buffer is referenced")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 77b823fa619f97d16409ca37ad4f7936e28c5f83 upstream.
This allows the assembly in entry.S to automatically keep in sync with
changes in the stack layout (struct pt_regs and struct switch_stack).
Cc: stable@vger.kernel.org
Tested-by: Maciej W. Rozycki <macro@orcam.me.uk>
Tested-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Ivan Kokshaysky <ink@unseen.parts>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ed6ae1f325d3c43966ec1b62ac1459e2b8e45640 ]
ndisc_send_skb() can be called without RTNL or RCU held.
Acquire rcu_read_lock() earlier, so that we can use dev_net_rcu()
and avoid a potential UAF.
Fixes: 1762f7e88e ("[NETNS][IPV6] ndisc - make socket control per namespace")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250207135841.1948589-8-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 90b2f49a502fa71090d9f4fe29a2f51fe5dff76d ]
ovs_vport_cmd_fill_info() can be called without RTNL or RCU.
Use RCU protection and dev_net_rcu() to avoid potential UAF.
Fixes: 9354d45203 ("openvswitch: reliable interface indentification in port dumps")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250207135841.1948589-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a42b69f692165ec39db42d595f4f65a4c8f42e44 ]
arp_xmit() can be called without RTNL or RCU protection.
Use RCU protection to avoid potential UAF.
Fixes: 29a26a5680 ("netfilter: Pass struct net into the netfilter hooks")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250207135841.1948589-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit becbd5850c03ed33b232083dd66c6e38c0c0e569 ]
__neigh_notify() can be called without RTNL or RCU protection.
Use RCU protection to avoid potential UAF.
Fixes: 426b5303eb ("[NETNS]: Modify the neighbour table code so it handles multiple network namespaces")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250207135841.1948589-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c25bdd2ac8cf7da70a226f1a66cdce7af15ff86f ]
The initial value of err is -ENOBUFS, and err is guaranteed to be
less than 0 before all goto errout. Therefore, on the error path
of errout, there is no need to repeatedly judge that err is less than 0,
and delete redundant judgments to make the code more concise.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: becbd5850c03 ("neighbour: use RCU protection in __neigh_notify()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 628e6d18930bbd21f2d4562228afe27694f66da9 ]
ndisc_alloc_skb() can be called without RTNL or RCU being held.
Add RCU protection to avoid possible UAF.
Fixes: de09334b93 ("ndisc: Introduce ndisc_alloc_skb() helper.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250207135841.1948589-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3c8ffcd248da34fc41e52a46e51505900115fc2a ]
ip6_default_advmss() needs rcu protection to make
sure the net structure it reads does not disappear.
Fixes: 5578689a4e ("[NETNS][IPV6] route6 - make route6 per namespace")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250205155120.1676781-11-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 719817cd293e4fa389e1f69c396f3f816ed5aa41 ]
inet_select_addr() must use RCU protection to make
sure the net structure it reads does not disappear.
Fixes: c4544c7243 ("[NETNS]: Process inet_select_addr inside a namespace.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250205155120.1676781-7-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dd205fcc33d92d54eee4d7f21bb073af9bd5ce2b ]
rt_is_expired() must use RCU protection to make
sure the net structure it reads does not disappear.
Fixes: e84f84f276 ("netns: place rt_genid into struct net")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250205155120.1676781-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 482ad2a4ace2740ca0ff1cbc8f3c7f862f3ab507 ]
dev->nd_net can change, readers should either
use rcu_read_lock() or RTNL.
We currently use a generic helper, dev_net() with
no debugging support. We probably have many hidden bugs.
Add dev_net_rcu() helper for callers using rcu_read_lock()
protection.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250205155120.1676781-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: dd205fcc33d9 ("ipv4: use RCU protection in rt_is_expired()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2034d90ae41ae93e30d492ebcf1f06f97a9cfba6 ]
Make the net pointer stored in possible_net_t structure annotated as
an RCU pointer. Change the access helpers to treat it as such.
Introduce read_pnet_rcu() helper to allow caller to dereference
the net pointer under RCU read lock.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: dd205fcc33d9 ("ipv4: use RCU protection in rt_is_expired()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 32ffed055dcee17f6705f545b069e44a66067808 upstream.
Add kfree() for "d->main_status_buf" to the error-handling path to prevent
a memory leak.
Fixes: a2d21848d9 ("regmap: regmap-irq: Add main status register support")
Cc: stable@vger.kernel.org # v5.1+
Signed-off-by: Jiasheng Jiang <jiashengjiangcool@gmail.com>
Link: https://patch.msgid.link/20250205004343.14413-1-jiashengjiangcool@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 80e648042e512d5a767da251d44132553fe04ae0 upstream.
Fix several issues in partition probing:
- The bailout for a bad partoffset must use put_dev_sector(), since the
preceding read_part_sector() succeeded.
- If the partition table claims a silly sector size like 0xfff bytes
(which results in partition table entries straddling sector boundaries),
bail out instead of accessing out-of-bounds memory.
- We must not assume that the partition table contains proper NUL
termination - use strnlen() and strncmp() instead of strlen() and
strcmp().
Cc: stable@vger.kernel.org
Signed-off-by: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/r/20250214-partition-mac-v1-1-c1c626dffbd5@google.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b9644fbfbcab13da7f8b37bef7c51e5b8407d031 upstream.
The stmpe_reg_read function can fail, but its return value is not checked
in stmpe_gpio_irq_sync_unlock. This can lead to silent failures and
incorrect behavior if the hardware access fails.
This patch adds checks for the return value of stmpe_reg_read. If the
function fails, an error message is logged and the function returns
early to avoid further issues.
Fixes: b888fb6f2a ("gpio: stmpe: i2c transfer are forbiden in atomic context")
Cc: stable@vger.kernel.org # 4.16+
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Link: https://lore.kernel.org/r/20250212021849.275-1-vulab@iscas.ac.cn
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3b35a171060f846b08b48646b38c30b5d57d17ff upstream.
do_page_fault() and do_entUna() are special because they use
non-standard stack frame layout. Fix them manually.
Cc: stable@vger.kernel.org
Tested-by: Maciej W. Rozycki <macro@orcam.me.uk>
Tested-by: Magnus Lindholm <linmag7@gmail.com>
Tested-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Maciej W. Rozycki <macro@orcam.me.uk>
Suggested-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Ivan Kokshaysky <ink@unseen.parts>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9e512eaaf8f4008c44ede3dfc0fbc9d9c5118583 upstream.
When flushing the serial port's buffer, uart_flush_buffer() calls
kfifo_reset() but if there is an outstanding DMA transfer then the
completion function will consume data from the kfifo via
uart_xmit_advance(), underflowing and leading to ongoing DMA as the
driver tries to transmit another 2^32 bytes.
This is readily reproduced with serial-generic and amidi sending even
short messages as closing the device on exit will wait for the fifo to
drain and in the underflow case amidi hangs for 30 seconds on exit in
tty_wait_until_sent(). A trace of that gives:
kworker/1:1-84 [001] 51.769423: bprint: serial8250_tx_dma: tx_size=3 fifo_len=3
amidi-763 [001] 51.769460: bprint: uart_flush_buffer: resetting fifo
irq/21-fe530000-76 [000] 51.769474: bprint: __dma_tx_complete: tx_size=3
irq/21-fe530000-76 [000] 51.769479: bprint: serial8250_tx_dma: tx_size=4096 fifo_len=4294967293
irq/21-fe530000-76 [000] 51.781295: bprint: __dma_tx_complete: tx_size=4096
irq/21-fe530000-76 [000] 51.781301: bprint: serial8250_tx_dma: tx_size=4096 fifo_len=4294963197
irq/21-fe530000-76 [000] 51.793131: bprint: __dma_tx_complete: tx_size=4096
irq/21-fe530000-76 [000] 51.793135: bprint: serial8250_tx_dma: tx_size=4096 fifo_len=4294959101
irq/21-fe530000-76 [000] 51.804949: bprint: __dma_tx_complete: tx_size=4096
Since the port lock is held in when the kfifo is reset in
uart_flush_buffer() and in __dma_tx_complete(), adding a flush_buffer
hook to adjust the outstanding DMA byte count is sufficient to avoid the
kfifo underflow.
Fixes: 9ee4b83e51 ("serial: 8250: Add support for dmaengine")
Cc: stable <stable@kernel.org>
Signed-off-by: John Keeping <jkeeping@inmusicbrands.com>
Link: https://lore.kernel.org/r/20250208124148.1189191-1-jkeeping@inmusicbrands.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0a0f7362b0367634a2d5cb7c96226afc116f19c9 upstream.
The problem is that GCC expects 16-byte alignment of the incoming stack
since early 2004, as Maciej found out [1]:
Having actually dug speculatively I can see that the psABI was changed in
GCC 3.5 with commit e5e10fb4a350 ("re PR target/14539 (128-bit long double
improperly aligned)") back in Mar 2004, when the stack pointer alignment
was increased from 8 bytes to 16 bytes, and arch/alpha/kernel/entry.S has
various suspicious stack pointer adjustments, starting with SP_OFF which
is not a whole multiple of 16.
Also, as Magnus noted, "ALPHA Calling Standard" [2] required the same:
D.3.1 Stack Alignment
This standard requires that stacks be octaword aligned at the time a
new procedure is invoked.
However:
- the "normal" kernel stack is always misaligned by 8 bytes, thanks to
the odd number of 64-bit words in 'struct pt_regs', which is the very
first thing pushed onto the kernel thread stack;
- syscall, fault, interrupt etc. handlers may, or may not, receive aligned
stack depending on numerous factors.
Somehow we got away with it until recently, when we ended up with
a stack corruption in kernel/smp.c:smp_call_function_single() due to
its use of 32-byte aligned local data and the compiler doing clever
things allocating it on the stack.
This adds padding between the PAL-saved and kernel-saved registers
so that 'struct pt_regs' have an even number of 64-bit words.
This makes the stack properly aligned for most of the kernel
code, except two handlers which need special threatment.
Note: struct pt_regs doesn't belong in uapi/asm; this should be fixed,
but let's put this off until later.
Link: https://lore.kernel.org/rcu/alpine.DEB.2.21.2501130248010.18889@angie.orcam.me.uk/ [1]
Link: https://bitsavers.org/pdf/dec/alpha/Alpha_Calling_Standard_Rev_2.0_19900427.pdf [2]
Cc: stable@vger.kernel.org
Tested-by: Maciej W. Rozycki <macro@orcam.me.uk>
Tested-by: Magnus Lindholm <linmag7@gmail.com>
Tested-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Ivan Kokshaysky <ink@unseen.parts>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 44de577e61ed239db09f0da9d436866bef9b77dd upstream.
The J1939 standard requires the transmission of messages of length 0.
For example proprietary messages are specified with a data length of 0
to 1785. The transmission of such messages is not possible. Sending
results in no error being returned but no corresponding can frame
being generated.
Enable the transmission of zero length J1939 messages. In order to
facilitate this two changes are necessary:
1) If the transmission of a new message is requested from user space
the message is segmented in j1939_sk_send_loop(). Let the segmentation
take into account zero length messages, do not terminate immediately,
queue the corresponding skb.
2) j1939_session_skb_get_by_offset() selects the next skb to transmit
for a session. Take into account that there might be zero length skbs
in the queue.
Signed-off-by: Alexander Hölzl <alexander.hoelzl@gmx.net>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20250205174651.103238-1-alexander.hoelzl@gmx.net
Fixes: 9d71dd0c70 ("can: add support of SAE J1939 protocol")
Cc: stable@vger.kernel.org
[mkl: commit message rephrased]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 257a2cd3eb578ee63d6bf90475dc4f4b16984139 upstream.
Runtime PM is enabled as one of the last steps of probe(), so all
earlier gotos to "exit_free_device" label were not correct and were
leading to unbalanced runtime PM disable depth.
Fixes: 6e2fe01dd6f9 ("can: c_can: move runtime PM enable/disable to c_can_platform")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://patch.msgid.link/20250112-syscon-phandle-args-can-v1-1-314d9549906f@linaro.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6aa8a63c471eb6756aabd03f880feffe6a7af6c9 upstream.
Several MeiG Smart modems apparently use the same product id, making the
defines even less useful.
Drop them in favour of using comments consistently to make the id table
slightly less unwieldy.
Cc: stable@vger.kernel.org
Acked-by: Chester A. Unal <chester.a.unal@arinc9.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 12606fe73f33647c5e79bf666833bf0b225e649d upstream.
The correct name for FN990 is FN990A so use it in order to avoid
confusion with FN990B.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
