Create a type for struct net device so that lower
layers in WIN can have access to the device handle.
Change-Id: I5f5469ea3fc65c64c4382c2dfbcf455bd96294a8
When pktlog enable gives an error as part of pktlog_release,
then return the error value.
Change-Id: I88289226d3dc933a46d6dba0cd6ee0b6d2abb2d5
CRs-Fixed: 2031287
Add infrastructure in pktlog utils to collect pktlogs as part
of bug report generation. As part of this when pktlog read command
is received on host:
1. disable pktlog,
2. read pktlog,
3. clear pktlog buffer,and
4. Retain pktlog initial state
Change-Id: I67e2231c2897007b58fa42a4f931b3c35ad1f418
CRs-Fixed: 2031287
Host support for Static and Dynamic chain mask selection.
parse new TLVs from ext service ready,copy tables to
wlan_objmgr_soc object.
CRs-Fixed: 2016643.
Change-Id: Ia4735eb4c7774c381df01f56696e8c86fc6c56ab
qcacld-2.0 to qcacld-3.0 propagation
Add 4 counts to link layer stats which will be retrieved along with
other link layer stats fields by application to decide if channel
hopping needed.
Change-Id: Ic413b8ad98f1147715cf89c083aa9a77e60a2dc6
CRs-Fixed: 1094958
Add API to pass initial configuration settings to
regulatory component.The regulatory component would
re-compute initialization channel list when this API
is called.
Change-Id: I414ecd189c0879515bd9b3f07537b3143a5cb0ed
CRs-Fixed: 2002892
Get rid of legacy regulatory API references from policy manager
as the new ones are available now.
Change-Id: I48d41599d7faeb760b51ca5f0d7672e8484e7f91
CRs-Fixed: 2009818
1. Take reference count for vdev/pdev/psoc object before posting
async message to scan component.
2. Take proper lock before invoking objmgr APIs which require locking.
3. Fixed few memory issues in failure cases.
Change-Id: I594b9ebf904c1c3b049a5d9d9e15679ac41599e7
CRs-Fixed: 1095299
Enable kernel panic on memory leak such that all basic memory
leak issues are reported every time and gets fixed on priority.
Change-Id: Ie990fa5bc4435ab717277578fa3a2ea71925e6d1
CRs-Fixed: 2030988
Policy mgr needs APIs for chan to freq and freq to chan APIs.
Add these APIs to regulatory component at pdev level.
Change-Id: I4a0cf2a4b02e16b81d24088c9e9b6c8d36ce6b6c
CRs-Fixed: 2002892
Enable WMI_ROAM_SCAN_MODE_FLAG_REPORT_STATUS flag so that firmware
sends status for the Roam Scan Offload[RSO] STOP command.
Change-Id: I2758103e8ca3c49c0fecd3323b619542dbbabf0c
CRs-Fixed: 1111809
After configuting the external group interrpts called configuring api
to configure external group interrupts.
Change-Id: I9db8c9dc941421fa05676be732147929be24b0e6
CRs-Fixed: 2018655
Regulatory component was disabled in change
I2d2b6cff74a174c19cd1a84c63e3009fc952d165 due to null range
value crash. That crash is fixed now. So re-enable regulatory
component..
Change-Id: I42a297bbe4e2b7c627fb11b2edc6323395ab8f8c
CRs-Fixed: 2002892
If high limit value is not found; there can be infinite loop
for searching for it. Fix it by checking for lower limit. Also
do NULL check on extended service capabilities pointer.
Change-Id: Ie3f78e470be77b2e9b34a1003c9e273c33da21db
CRs-Fixed: 2002892
In function os_if_wifi_pos_send_peer_status free buffer used to send
peer status indication to userspace after use.
Change-Id: Id90ea35aef4584d0ee7ef856d5cd12104eb089a4
CRs-Fixed: 2030121
Use length of service_to_pipe array to loop through services instead of
array size.
Change-Id: I107203861501ed5ac348979868ac981b5a6cd1ae
CRs-Fixed: 2033254
Create a timestamp conversion helper that returns whole seconds and
remaining micro seconds, for easier consumption by logging methods.
Change-Id: I5bc40075566485f3dc9f7e5fd81a13ec462c5da0
CRs-Fixed: 2031564
qdf_net_buf_track_free_list not cleared in nbuf memory
manager destroy API leads to crash in reprobe case.
clear qdf_net_buf_track_free_list in nbuf memory
manager destroy.
CRs-Fixed: 2029297
Change-Id: I4d652c38a23f0e31ff21321692bcecc9456bf03a
Make the following TLV WMI layer changes related to 160/80+80 MHz
functionality:
- While forming the VDEV start/restart command, if the request from
the upper layer indicates the dfs_set_cfreq2 flag, then enable the
WMI_CHAN_FLAG_DFS_CFREQ2 channel flag. This is needed in order to
enable radar event reporting for the secondary 80 MHz segment.
Make this change only in the WIN specific implementation of
copy_channel_info(). If required for MCL, to be handled separately.
- Move the 'peer_bw_rxnss_override' member in
'struct peer_assoc_params' to outside the '#ifndef CONFIG_MCL'
section so that it is available both on MCL and WIN. Since
in MCL code peer_assoc_params is initialized to all zeros and
peer_bw_rxnss_override is not set anywhere later, this should
have no side effects.
- While forming the PEER assoc completion command, populate the
peer_bw_rxnss_override field as per the corresponding parameter
sent by the upper layer. This is required for providing override
values of Rx NSS for bandwidths higher than 80 MHz.
Testing:
- Tested on QCA8074 that the WMI_CHAN_FLAG_DFS_CFREQ2 channel flag
is being set in the VDEV start command if the secondary 80 MHz
lies on DFS channels (tried VHT160 and VHT80_80)
- Tested on QCA8074 AP and STA that the peer_bw_rxnss_override
value is being set in the PEER assoc completion command to
indicate Rx NSS value 2, when NSS value 4 is used for <=80 MHz
(tried VHT160 and VHT80_80). Also tested ping.
Change-Id: Ic45d80567eeed3707f76e513f772ce4da71d6ee0
CRs-Fixed: 2022037
Add support to add memory tracking in tx path in WLAN driver using
already present infrastructure for memory tracking.
Change-Id: I6a2c9890e0af1fd51c4e2dfcded68f0075a3a4ef
CRs-Fixed: 2025670
PNO can be initiated from IOCTL with different calback and
thus register the callback while sending the PNO req.
Change-Id: I74109fc88cfbd082ce2ba5ca0a2396ab08b82b42
CRs-Fixed: 2032434
Now all host and firmware logs are sent to multicast group id's
and are not sent to particular process on userspace.
Change-Id: I6fc9540de1313d6a2ad3564090e5fed281f54a62
CRs-Fixed: 2024754
Setting the SRNG_ENABLE bit is required for devices with newer
hardware definitions. Setting this bit is a no-op for older
hardware.
Change-Id: I2e0369b62a89f6a9a32f9e211ab815e3c16b2393
CRs-Fixed: 2032351
packets received on a particular radio are queued to
a user configured reo destination ring.
Change-Id: I080090f22b80fd8d8868df4145b82888e1111cea
CRs-Fixed: 2017081
Implement iwpriv pktlog command to clear pktlog buffer.
This command is effective only if pktlog disable is issued previously.
This command needs one argument.
Command to use this feature : iwpriv wlan0 pktlog 4
Change-Id: I431169a10828b6cfcd21c7d8065f325c5eb8cbba
CRs-Fixed: 2031212
Currently driver is not initialize scan_f_chan_stat_evnt from
the configuration file which causes WMI_SCAN_CHAN_STAT_EVENT
to be always not included in the scan flag.
Add changes to initialize scan_f_chan_stat_evnt based on
ini configuration.
Change-Id: If6ea1d5c4efcc6d934daf00b537f25f0727ee55b
CRs-Fixed: 2031301
Array overflow causes kernel panic. Need to fix it in future;
disabling the regdb component now.
Change-Id: I2d2b6cff74a174c19cd1a84c63e3009fc952d165
CRs-Fixed: 2002892
It doesn't process scan dequeue and start failed event, which cause
STA scan doesn't complete and blocking next scan work in
wpa_supplicant. For scan dequeue and start failed event with match
reason, indicate scan aborted to up layer.
Change-Id: I8861e277143116878f6714e50b600d77df69eeb1
CRs-Fixed: 2029955
Remove the dependency of dma_map for align_pad calculation
move the dma_map to correct position after mesh mode header addition
Change-Id: Idd309ed47d82f68f97191048c582c1b429f3b378
CRs-Fixed: 2004658
Fix CE full error when only legacy hif_send_head api is used on a ce configured
to use the fastpath logic.
Change-Id: I59530a0e5ff8b62a1b97007dcd959daa03025785
CRs-Fixed: 2018893
move ce_id_to_state assignment to the end where ce_init
is guaranteed to succeed.
Change-Id: I5172eb1136dde2aad915c2497ece94150c95630f
CRs-Fixed: 2020794
Copy pasted logic was not maintained, leading to different
maps being used in different code sections. Also fixes
fw assert where multiple wmi services are not available on
the fw for napier.
Change-Id: Iff3ec8938cc16afe0ebae54244060afb0a7d0b2e
CRs-Fixed: 2030840
WMI RX event processing is very critical for WLAN driver and today
we are using kernel's shared event work queue. Shared event work
queue is used by many drivers and if any work submitted in shared
work queue takes longer time to finish then it directly impacts WLAN
control path processing.
Define a dedicated work queue for WMI RX event processing and use
it for WMI RX event handling.
Change-Id: I8ee6ca5b4b20c3357d46f8b56943078a0a76977f
CRs-Fixed: 2029775
qdf_create_work is not returning any status hence modify it
to return proper QDF status to know proper status of work creation.
Change-Id: I8fc84933cc85ba628363638d7567b083ecbf4f34
CRs-Fixed: 2026441
